Transcript
945 Overlock Technical Data
Designation Model type Name Weight Dimension
Sewing surface Needle system Sewing technique
Sewing programs
Optional PRO Card Memory back up Memory program Program display screen Language selection
Thread tension system Tension release Tension setting fine tuning
Threading system Stitch length Differential feed Cutting width
Household overlock 5 thread overlock Elna 945 9 kg (20 lbs) Length:31.7 cm (12.48”) Width: 25 cm (9.84”) Height: 26.9 cm (10.59”) Length: 17.5 cm (6.88”) Width: 25 cm (9.84”) Type ELx 705 or 130/705H 5/4/3/2 threads Triple cover hem (3 needles) Cover Hem wide (5 mm) and narrow (2 needles) 2 thread Chain stitch Total of 24 basic sewing programs. For additional sewing programs, this unit is provided with a standard PRO Card system. These cards have 3 pre-programmed sewing techniques and 3 blank programs for personal settings. Settings stored in the memory can be kept indefinitely. 24 independent memories, one for each program LCD screen with backlight. Display program names in English, French, German, Spanish, Italian, Afrikaans or Portuguese. Additional languages may be input with an optional PRO Card. "Automatic" tension is controlled electronically by 4 stepping motors. Controlled electronically The tension setting is set automatically according to the program chosen. If necessary, tensions can be adjusted manually by the +/- keys in .2 increments. The tension range is from 0.0 to 9.0 and can be memorized. Lay-in type for direct insertion of thread Control lever located on the front for easy access and selection. Stitch length setting 0.5 to 4 mm. Control lever located on the front for easy access and selection, total of 4 positions, ratio: 0.5 – 1.0 – 1.5 – 2.0. Indication displayed on the LCD screen. Built-in dial for location is located inside left cover with a see-through window for easy viewing and selection. Width is measured in "inches" and in "metric". Based on L2 needle position, maximum cutting width is 9 mm.
1
945 Overlock Technical Data
Foot pressure adjustment
Looper system Machine threading
Chain looper threading
Threading charts Needle clamp Needle fixation Movable cutting blade Thread cutter Sewing foot Presser foot lever Presser foot lift Antenna Carrying handle Instant rolled hem device Foot control Lamp rating Main voltage Motor power Main switch Safety device Maximum speed Speed control Accessories
Waste tray Protection cover Packaging
Built-in dial located on the upper section of the machine provided with 6 positions. Standard position (5) is indicated by a square mark. Oscillating motion. Easy threading of the thread guides and loopers. Lower looper thread guide will automatically shift into working position when sewing begins. System provided with a disengaging device for easy access and threading of the looper. Chain looper will automatically shift into working position when sewing begins. Located on the inside front cover. System provided with an exclusive tilting disengaging device for easy setting and insertion of the needles. Separate fixation for each of the 5 needles (overlock needles 2; chainstitch and cover hem needles - 3). System blade located in the lower section of the casing. Can be locked or disengaged. Integrated with the presser foot lever. Clip-on system. Located on the side; easy to access and to use. Space under foot 5 mm. Extra lift 2 mm (total 7 mm). Detachable telescopic type antenna. Inserted into spool pin base. Incorporated handle. Knob for immediate rolled hem selection; located underneath the needle plate on the right side. Electronic foot control system starts the machine smoothly. 14 volts / 5 watts AC Current 120 V/60 Hz, 220-240 V/50 Hz DC voltage only 120 V, 220-240 V ON and OFF switch for the sewing light, circuit board and main motor. The front and side covers, tilting needle clamp and presser foot are provided with a safety micro switch. 1500 RPM Located on front of machine Most often use accessories are behind the side cover for easy access: tweezers, threader device, package of needles, 2 thread converter and allen screwdriver. Remaining accessories include: wrench, spare movable cutting blade, spool caps, oil tube, cleaning brush, quilting guide, snap -on thread guide, tension release clips, clear foot F, foam pads, spool holders and sewing table. Standard, attaches to front cover. Soft vinyl cover. Optional carrying bag available. Four color cartons (boxes).
2
945 Overlock Technical Data
Optional accessories
Multi Purpose Foot C and Elastic Gatherer Blind Hem Foot D Piping Foot E and Tape Guide Attachment Gathering Foot G Pearl Foot P and special needle plate Taping Foot Q and K-2 guide Cloth Curve Guide Deluxe Cloth Guide
Special accessories for chain stitch and cover hem
Clear Chainstitch Foot F and F-2, F-3, F-4 Guides Cover Hem Foot H and H-1, H-2, H-3 Guides Pintuck Foot K and K-1, K-2 Guides Belt Loop Foot L Adjustable Bias Binder Foot M Topstitch Covered Seam Foot N and N-1 Guide Bias Binder Attachment Quilt Guide
3
