Transcript
Omnidirectional single antenna Features • Omnidirectional • 6 dBi gain • 1880-1920 MHz • Mountable to wall or pole General The ‘omnidirectional single antenna’ is an omnidirectional 6 dBi colinear antenna fitted with a 1 meter coaxialcable and a MCX male connector. It is supplied with a wall bracket and a pole mounting clamp. With this polemounting clamp the antenna can be mounted to a pole with diameter of 25 to 37 mm.
Specifications Specifications subject to change without prior notice. General Manufacturer: Product code manufacturer: Physical Height: Weight: Material/colour:
Environmental Operating temperature: Functional Specs Frequency range: Nominal impedance: VSWR: Polarization: Gain (at connector level): Radiation in horizontal plane: Radiation in vertical plane: Maximum power: Connector:
On-site wireless communications for quicker response
MAT Equipment MA430X14
375 mm (above wall mounting bracket) ≈ 0.2 kg (excl. pole mounting bracked of 70 grams) shroud: glass fiber, greyupper cap: plastic, black base: plastic, blackwall bracket: glass fiber, greypole mounting clamp: stainless steel
-33 to +55 °C
1880 to 1920 MHz 50 ohms ≤ 1.7 linear, vertical 4.8 dBi ± 0.3 dBi omnidirectional within ± 0.3 dB beam width (E-plane) at -3 dB: ≈24° 10 watts MCX male connector at the end of a 1 m RG316 coaxial cable (minimum bending radius: 20 mm)
ascom
0 dB
0 dB -1
-1
60˚
60˚
-3
-3
30˚
-6
30˚
-6 -10 -13
-10 -13
-20
-20
0˚
0˚
30˚
30˚
Typical radiation in horizontal plane
60˚
Typical radiation in vertical plane
M0266501 Ver. A June 2004 Ascom Tateco AB Specifications are subject to change without notice.
60˚
Ascom Tateco AB Wireless Solutios PO Box 8783 SE-402 76 GÖTEBORG T -46 31 55 94 00 F +46 31 55 63 78 www.ascom.com/ws
ascom
