Preview only show first 10 pages with watermark. For full document please download

9v Energizer Nh22-175 Product Datasheet Specifications

   EMBED

Share

Transcript

PRODUCT DATASHEET Asia Pacific Region +852‐31026623 ENERGIZER NH22-175 Specifications Classification: Chemical System: Rechargeable Nickel-Metal Hydride (NiMH) Nominal Voltage: Rated Capacity: 8.4 Volts 175 mAh (to 5.5 volts) Based on 35 mA (0.2C) discharge rate Typical Weight: Typical Volume: Terminals: Jacket: 42.0 grams 22.0 cubic centimeters Snap Plastic Label Industry Standard Dimensions (millimeters) 17.50 15.50 9V 12.95 12.45 Internal Resistance: 26.50 24.50 The internal resistance of the cell varies with state of charge, as follows: Cell Charged Cell 1/2 Discharged 1000 milliohms 1500 milliohms (tolerance of ±20% applies to above values) 46.40 Maximum 48.50 46.50 AC Impedance (No Load): The impedance of the charged cell varies with frequency, as follows: Frequency (Hz) Typical Discharge Characteristics 1000 Typical Performance at 21ºC Cell Voltage 8.0 Above values based on AC current set at 1.0 ampere. Value tolerances are ±20%. 17.5 mA (0.1C) 7.5 7.0 Operating and Storage Temperatures: 6.5 35 mA (0.2C) 6.0 To maintain maximum performance, observe the following general guidelines regarding environmental conditions. 5.5 0 3 6 9 12 Hours of Discharge Typical Performance at 21ºC 8.0 Cell Voltage Impedance (milliohms) (Charged Cell) 950 0ºC to 40ºC 0ºC to 50ºC -20ºC to 30ºC 65±20% Operating at extreme temperatures, will significantly impact battery cycle life. 7.5 87.5 mA (0.5C) 7.0 Charge: Discharge: Storage: Humidity: 6.5 350 mA (1.0C) 6.0 5.5 0.0 0.3 0.6 0.9 1.2 1.5 Hours of Discharge Important Notice This datasheet contains typical information specific to products manufactured at the time of its publication. ©Energizer Holdings, Inc. - Contents herein do not constitute a warranty. Form No. EBC - 8919AP-A Page 1 of 1