Transcript
USER MANUAL
Refrigerator type Water Dispenser
Model # A121HCHK-SC-BP-40
!
WARNING
TO REDUCE THE RISK OF INJURY AND PROPERTY DAMAGE, USER MUST READ THIS MANUAL BEFORE ASSEMBLING, INSTALLING & OPERATING DISPENSER.
SAVE THIS MANUAL FOR FUTURE USE
A121HCHK-SC-BP-40 © 2015 Classic Water Corporation PN: 5M011013XN00(E+F) V
Model: A121HCHK-SC-BP-40 Page 2
PRODUCT FEATURES 1
This water cooler have Hot, Cold, room-temperature water and a fridge for food storage.
2
Fast cooling and heating systems make 90°C/194°F hot water and 6°C/42.8°F cold water . The bottom Fridge keeps 4°C/39°F temperature and good for storing milk, meat and beverages.
Child safety hot tap button
No-leak bottle receptacle
Carge 0.77 cubic feet refrigerator
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 3
TO LOAD 24 REGULAR SODA CANS POSIITION TWO SHELVES AS SHOWN.
TO LOAD 18 TALL CANS POSITION TWO SHELVES AS SHOWN. IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 4
SAFETY PRECAUTIONS
To reduce risk of injury and property damage, user must read this entire manual before assembling, installing & operating dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. When operating this dispenser, always exercise basic safety precautions, including the following: •
Prior to use, this dispenser must be assembled and installed in accordance with this manual.
•
This dispenser is intended for water dispensing only. Do NOT use other liquids. Do NOT use for other purposes. Never use any other liquid in the dispenser other than known and microbiologically safe bottled water. Warranty is void if used for any other liquids including coffee, tea, juices, beer or wine.
•
For indoor use only. Keep water dispenser in a dry place away from direct sunlight. Do NOT use outdoors.
•
Install and use only on a hard, flat and level surface.
•
Do NOT place dispenser into an enclosed space or cabinet.
•
Do NOT operate dispenser in the presence of explosive fumes.
•
Position back of dispenser no closer than 4 inches from wall and permit free airflow between wall and dispenser. There must be at least 4 inches clearance on the sides of the dispenser to permit airflow.
•
Use only properly grounded outlets.
•
Do not use an extension cord with your water dispenser.
•
Always grasp plug and pull straight out from outlet. Never unplug by pulling on power cord.
•
Do NOT use dispenser if cord becomes frayed or otherwise damaged.
•
To protect against electric shock, do NOT immerse cord, plug, or any other part of cooler in water or other liquids.
•
Ensure dispenser is unplugged prior to cleaning.
•
Never allow children to dispense hot water without proper and direct supervision. Unplug unit to prevent unsupervised use by children.
•
Please contact us at 1-844-926-6537 for assistance.
•
Turn power switch(es) ON after cooler is plugged in and fill with water.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A1218351DB Page 5
SAFETY PRECAUTIONS ---Electrical Requirements Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. A 120 volt, 60 Hz., AC only, 15 amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. Do not overload the ciruit, provide separate circuit, if required, to serve only this appliance. This water cooler is equipped with a power supply cord having a 3 prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances,a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician. If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate. Do not ground to a gas pipe. Check with a qualified electrician if you are not sure the water cooler is properly grounded. Do not have a fuse in the neutral or ground circuit. This appliance is not intended for use by persons (including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected water cooler: This water cooler must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This water cooler is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance-if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
“ Please make sure that ELECTRICAL OUTLET IS PROPERLY WIRED TO CORRECT SIZED CIRCUIT BREAKER OR FUSE AND PROPERLY GROUNDED. MUST BE WIRED TO HAVE CORRECT POLARITY. ”
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 6
TABLE OF CONTENTS Product Features
2
Safety Precautions
4
Safety Precautions-Electrical Requirements
5 .
Key Information for Future Use
6
Specifications
7 ..
Parts & Features
7
Assembly
8
Proper Care and descaling
.
. ..
Operation
9 12
Troubleshooting
13
Limited Warranty
15
KEY INFORMATION FOR FUTURE USE Please register your dispenser immediately at www.electrotemp.com For future support please record your serial number (located on label on back of dispenser) and date purchased. Staple your receipt to manual. You will need this information to obtain warranty service. Product
Refrigerator Type Water Cooler
Model Number
A121HCHK-SC-BP-40
Serial ID Number Date of Purchase
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 7
SPECIFICATIONS Voltage/frequency/current
120V/ 60Hz/ 6.5A
Refrigerant Type
R-134A
Cooling Power
100 W
Hot Water Power
650 W
Cold water capacity / Hour
1.06Gallon / 4L （<10 C)/（<50 F)
Hot water capacity / Hour
1.59Gallon / 6L
Fridge temperature
4-6 °C / 39.2-42.8°F
Fridge volume
5.94 Gallon / 22.5L
Dimensions
109.8 H x 32 W x 38.2 D (cm ) 43.2 H × 12.6 W × 15 D (inch)
Net Weight
48.5Ibs / 22Kg
O
O
>80 C （ / >176 F) O
O
PARTS & FEATURES Tap button:Hot Water
1
Child Safety Lock
2
Tap button:Room Temp Water
3
Tap button:Cold Water
4
Tap:Hot Water
5
Tap:Room Temp Water
6
Tap: Cold Water
7
LED Night Lights
8
Drip Tray
9
Door
10
Hot Power Switch
11
Power Cord
12
Carry Handle
13
Drain Plug
14
1 2
Front
Back
3 4 11
5 6 8
7
ON OFF
12
13 14 9
10
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 8
ASSEMBLY
Keep plastic bags away from children.
1.
Remove dispenser from packaging.
2.
Unpack drip tray and insert into dispenser. As shown
3. 4.
Properly dispose all of packaging. Find a location for your water cooler that is protected from direct sunlight and other sources of heat. Like all other water coolers, prolonged exposure to sunlight will discolor the plastic exterior
5.
Place the cooler on a flat, level surface
6.
To ensure the cooler is level, adjust its feet by rotating them
adjusting 4 feet first and slightly
adjust 5th feet last. As show 7.
8.
Make sure the back of your water cooler is at least 4 inches away from the wall. Keep a minimum distance of at least 4 inches on each side of your water cooler free. Keep items such as papers, clothing, and furniture at a safe distance. As show This cooler is designed and built for indoor use only. Room temperature should not exceed 37 C/99 F. O
O
4 feet
IMPORTANT: Do NOT Return Dispenser To Store.
5th feet
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 9
PROPER CARE AND DESCALING General Cleaning Perform :As needed Time Required:5minutes Note :Do Not use abrasive material or chemical cleaners 1.
Unplug power cord from wall outlet.
2.
Clean cabinet surfaces with a soft cloth and warm soapy water.
3.
Wipe dust from back of dispenser to improve efficiency.
4.
Remove drip tray assembly by sliding it forward. Remove cover. Place tray and cover in dishwasher or wipe parts clean with a soft cloth and warm soapy water.
Ready to use out of the box
You cooler is ready to use out of the box and manual cleaning is not required. However if you wish you can clean using procedure described below.
Perform: Every 3 months or whenever an off-taste occurs. Time Required: 15 minutes. 1.
Place the cooler upright.
2.
Make a sanitizing solution of 1.5 gallons of tap water and 3 tablespoons of chlorine (unscented household bleach) gallon bottle.
3.
Place bottle with cleaning liquid on the water cooler , As shown
4.
For cleaning dispense 2 cups of water from each faucet.
5.
Place a 2 gallon or larger bucket under the drain plug in the rear of the dispenser, As show
6.
Remove drain cap and silicon plug. Cold water will immediately flow into the bucket. Several seconds later hot water will dispense
7.
Remove remaining water from reservoir by dispensing from the cold tap into a pitcher Repeat step 2-7 with clean water, until water become clean and odorless. Once unit has drained, replace silicon plug and drain cap.
8. 9.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 10
Descaling
If you use mineral water you will need to descale your hot water tank. Your premium hot-water tank has an external heater and is the best for use with mineral water, as it will not burst open like an internal heater. Internal heaters are very harsh on mineral water and tend to be covered in hard crust that acts as an insulator. Heating element overheat and burst eventually. (This issue is well demonstrated by electrical home water heaters, which have provisions to replace burned out heater elements.) External heaters have a lesser effect on mineral water, but still will alter mineral water by causing minerals to fall out. Eventually they will plug up your waterways, causing gradual slowdown of the flow rate, leaking faucets, and other problems. Descaling Solutions There are 2 substances proven to remove calcium deposits efficiently. They are: 1. White vinegar used for cooking. 2. Lemon acid in powdered form, used by beverage makers and bakeries. Depending on the frequency of decalcification treatments, please use the following proportions of substances. 1. White Vinegar: - For descaling once every 3 months, use 2 cups (500 ml) of white vinegar with 2.5 liters of hot water. - For descaling once every 6 months, use a mixture of 6 cups of white vinegar with 2 liters of hot water. - For descaling once every year, use 12 cups of white vinegar and 1 liter of hot water. -For descaling less frequently than once a year, use undiluted white vinegar. 2. Lemon Acid: - For descaling once every 3 months, use a mixture of 1 oz. of powdered lemon acid and 3.5 liters of hot water. - For descaling once every 6 months, use a mixture of 2 oz. of powdered lemon acid and 3.5 liters of hot water. - For descaling once every year, use a mixture of 4 oz. of powdered lemon acid and 3.5 liters hot water. - For descaling less frequently than once a year, use a mixture of 5 oz. of powdered lemon acid and 3.5 liters hot water.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 11
Descaling Procedure 1. Fill a bucket or empty 5-gallon water bottle with the descaling solution of your choice. For proportions, refer to the instructions above. Choose substance and quantity in accordance with the frequency of your treatments. 2. Attach or insert the probe to the bucket/bottle. 3. Place the bucket/bottle into the cooler and close the door. The water will be pumped up into the holding tanks. 4. Plug in the cooler and turn on the hot switch located at the back of the cooler. Do not turn on the cold-water switch. 5. Wait for 1 hour. 6. Unplug the cooler from the wall 7. Using rear drain plug, drain the water from the cooler into a bucket and discard the water. A. Locate the white plastic cap at the back of the cooler. B. Remove the screw. C. Remove the clear silicone drain plug and allow water to drain out. D. Reattach the drain plug and plastic cap before proceeding. 8. Fill the bucket/bottle with tap water and place into the machine. 9. Plug the cooler back into the wall, close the door and wait for 10 minutes. 10. Dispense water from both cold and hot faucets until smell from cleaning substances disappears. 11. Open drain plug and cap once again and drain all tap water. 12. Replace the drain plug and cap. 13. Place a fresh bottle of water into the machine and operate as usual. 14. This procedure must be repeated every 3 to 6 months, depending on mineral content and usage of water cooler.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 12
OPERATİON Note: If cooler was translated on its side, water cooler should stand upright for at least 4 hours. Make sure the water cooler is full filled with water before plugging in power. Cooling system is set to provide priority for refrigerators compartment. It takes about 4 hours to reach 4°C/39°F at 25°C/77°F ambient temperature. 1.
Tear off the plastic seal or label wrapping outside of the bottle cap, Place down the water bottle into the bottle receptacle vertically, the bottle cap will be pierced by the probe and bubbles will pop up while filling water into the cooler.
2.
Press down the cold and hot tap button until the water comes out from both taps.
3.
Plug power cord into a grounded power socket, the compressor will start cooling, turn on the hot power switch and hot tank start working, it may take 4 hours to generate full ice bank for cooling water. Hot tank preheat time is about 20 minutes.
4.
To change a new water bottle, remove the bottle vertically up then repeat the step 1 and step 2.
2
How to use the child-safety hot water tap First press down the child safety lock, and then press down the button without releasing the childsafety lock. As shown in figure Refrigerator door
1
The refrigerator door must be closed tightly to make sure the fridge work properly.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 13
TROUBLESHOOTING HOT WATER FLOW IS SLOW OR NON-EXISTENT When mineral water is used calcium deposit will block passageways in the hot tank. This blockage can be observed by the gradual slow down in the flow rate. Use Lime, Calcium and Rust Remover (available at hardware stores) to dissolve calcium deposits. Follow manufacturer’s instructions for use of LCR Remover. Alternatively can use 20% lemon acid solution Dissolve 20 oz of lemon acid powder in 3 quarts of warm water. - Unplug power cord. - Drain water out of the cooler using drain at the back. If it is plugged up, dispense all water via faucets. - Leave drain at the back open for sufficient time to have water leak out of the drain. - Close drain and feed water into cooler using coolers own probe. Use a small container to feed water. Close door to activate door switch. - Leave it soaking for 24 hours. - Drain lemon acid solution via drain at the back. - To rinse, fill container with tap water and feed water into cooler. - Drain water periodically using drain at the back. This procedure must be repeated at 3 to 6 months intervals depending on mineral content and usage of water cooler.
SYMPTOMS
No hot water
POSSIBLE REASONS
HOW TO SOLVE
1. There is no power or not plugged in.
1. Plug in power cord.
2. Hot power switch is “OFF”.
2. Turn switch ON.
3. Water level might be low. High
3. Wait for about one hour until the
temperature sensor might had tripped.
high temperature sensors reset itself.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 14
No cold water
1. There is no power or not plugged in.
1. Plug in power cord.
2. Too many stuff is contained in the
2. Spare few place for cooling
refrigerator compartment. 3. Refrigerator’s priority, wait few hours. 4. Call for service.
sufficiently. 3. Wait for a few hours. Make sure refrigerator is not empty. 4. Check if the condenser (at the back) is warm or not. If it is not warm call
Refrigerator does not cool
Water leakage
Noisy
No water is coming from the taps
1. Fridge door is not closed properly.
1. Close door tightly
2. It might take over 4 hours to cool refrigerator compartment first time.
2. Wait for 4 hours.
3. Compressor cooling system problem if there is no cold water and fridge doesn’t cool.
3. Check if the condenser (at the back)
1. Water bottle is broken or has crack(s).
1. Change a new good water bottle.
2. Condensate water flows out from the fridge.
2. Clean up the fridge with soft cloth.
1. Water cooler is not well placed.
1. Please cooler on flat floor.
2. Co-vibration.
2. If press the condenser (at back) by hand and the noise disappear, put a soft piece under the condenser to eliminate the co-vibration.
1. Water bottle is empty.
1. Change a new water bottle.
is hot or not by hand. If it is not hot call for service.
2. The seal on the bottle cap is not removed 2. Make sure to remove the label or sticker on the bottle cap. and it is stuck to the bottle receptacle probe. 3. Big ice blocks the water passage.
3. The ice inside the cold water tank is too big to block the water passage, call for service.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
Model: A121HCHK-SC-BP-40 Page 15
LIMITED WARRANTY Electrotemp Technologies Inc., (“Vendor”) warrants to the original purchaser of this dispenser, and to no other person, that if this dispenser is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such dispenser shall be free from defects in material and workmanship. Vendor may require reasonable proof of your date of purchase from an authorized retailer or distributor. Therefore, you should retain your sales slip or invoice. The Limited Warranty shall be limited to repair or replacement of parts, which prove defective under normal use and service and which Vendor shall determine in its reasonable discretion upon examination to be defective. Before returning any parts, you should contact Vendor’s Customer Service Department using the contact information listed below. If Vendor confirms, after examination, a defect covered by this Limited Warranty in any returned part, and if Vendor approves claim, Vendor will replace such defective part without charge. If you return defective parts, transportation charges must be prepaid by you. Vendor will return replacement parts to original purchaser, freight or postage prepaid. The Limited Warranty does not cover any failures or operating difficulties due to accident, abuse, misuse, alteration, misapplication, improper installation or improper maintenance or service by you or any third party, or failure to perform normal and routine maintenance on the dispenser, as set out in the User’s Manual. In addition, the Limited Warranty does not cover damages to the finish, such as scratches, dents, discoloration or rust after purchase. The Limited Warranty is in lieu of all other express warranties. Vendor disclaims all warranties for products that are purchased from seller other than authorized retailers or distributors. AFTER THE PERIOD OF THE ONE (1) YEAR EXPRESS WARRANTY, VENDOR DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER, VENDOR SHALL HAVE NO LIABILITY WHATSOEVER TO PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTAL DAMAGES. Vendor assumes no responsibility for any defects caused by third parties. This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other rights depending upon where he or she lives. Some jurisdictions do not allow exclusion or limitation of special, incidental or consequential damages, or limitations on how long a warranty lasts, so the above exclusion and limitations may not apply to you.
Warranty is void if electrical outlet is improperly wired to incorrectly sized circuit breaker or fuse, if not grounded properly , or wires do not have correct polarity.
Electrotemp Technologies Inc. 406 Watline Avenue Mississauga, Ontario, L4Z-1X2 1-844-926-6537 www.electrotemp.com
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-452-2425 for assistance.
