Transcript
Installation Guide
Accessories
TM
AA66 Foam Gasket Kit for Use With GWN Series Devices Product Overview The AA66 foam gasket kit is used with the GWN series gas platform housing. In some applications, the GWN is installed on a non-standard electrical box (e.g. weatherproof-style electrical box). In these applications, the GWN housing may not provide a proper seal against the box. To improve the fit, install the AA66 foam gasket between the housing and the box. The AA66 includes replacement screws to secure the GWN and gasket to the box.
Installation
NOTICE • This product is not intended for life or safety applications. • Do not install this product in hazardous or classified locations. • Read and understand the instructions before installing this product. • Turn off all power supplying equipment before working on it. • The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the use of this material.
1. Disconnect power prior to installation. 2. Prior to mounting the GWN to the electrical box, place the foam gasket as shown below. Use the screws included with the AA66 to secure the GWN in place. 3. Follow the instructions for wiring and configuring the GWN according to the GWN installation guide.
GWN Cover
AGxx Sensor
GWN Backplate
AA66 Gasket
Electrical Box
AA66 Long Screw (use silver screw with white GWN housing; use black screw with black GWN housing)
AA66 Short Screw
Z206860-0A
Page 1 of 1
©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 /
[email protected] 05141
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
