Transcript
Product data sheet Characteristics
ABL8REM24030
regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 3 A
Commercial Status
Commercialised
Range of product
Phaseo
Product or component type
Power supply
Power supply type
Regulated switch mode
Input voltage
110...220 V DC 100...240 V AC single phase, terminal(s): N-L1 100...240 V AC phase to phase, terminal(s): L1-L2
Output voltage
24 V DC
Rated power in W
72 W
Input protection type
Integrated fuse (not interchangeable)
Power supply output current
3A
Output protection type
Against undervoltage, protection technology: tripping if U < 0.8 x Un Against short-circuits, protection technology: automatic reset Against overvoltage, protection technology: tripping if U > 1.5 x Un Against overload, protection technology: 1.1 x In
Complementary Input voltage limits
100...250 V 85...264 V
Network frequency
47...63 Hz
Inrush current
<= 30 A
Cos phi
0.65
Efficiency
> 85 %
Output voltage limits
100...120 % adjustable
Power dissipation in W
12.7 W
Current consumption
1.46 A at 100 V 0.83 A at 240 V
Line and load regulation
+/- 3 %
Holding time
>= 10 ms at 240 V >= 10 ms at 100 V
Connections - terminals
Screw type terminals for output ground connection, connection capacity: 1 x 0.14...1 x 2.5 mm²AWG gauge26...14 Screw type terminals for output connection, connection capacity: 2 x 0.14...2 x 2.5 mm²AWG gauge26...14 Screw type terminals for input ground connection, connection capacity: 1 x 0.14...1 x 2.5 mm²AWG gauge26...14 Screw type terminals for input connection, connection capacity: 2 x 0.14...2 x 2.5 mm²AWG gauge26...14
Marking
CE
Mounting support
35 x 15 mm symmetrical DIN rail 35 x 7.5 mm symmetrical DIN rail 75 x 7.5 mm symmetrical DIN rail
Operating position
Vertical
Output coupling
Parallel Series
Oct 1, 2015
1
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Main
Name of test
Surge conforming to EN/IEC 61000-4-5 Rapid transient conforming to IEC 61000-4-4 Radiated electromagnetic field conforming to EN/IEC 61000-4-3 Primary outage conforming to IEC 61000-4-11 Induced electromagnetic field conforming to EN/IEC 61000-4-6 Emission conforming to EN 50081-1 Electrostatic discharges conforming to EN/IEC 61000-4-2 Conducted/Radiated emissions conforming to EN 55022 Class B Conducted/Radiated emissions conforming to EN 55011
Status LED
1 LED orange for input voltage 1 LED green for output voltage
Depth
120 mm
Height
120 mm
Width
27 mm
Product weight
0.52 kg
Environment Product certifications
CCSAus CSA 22-2 No 950-1 C-Tick CULus 508 TUV 60950-1
Environmental characteristic
Safety conforming to SELV Safety conforming to EN/IEC 60950 EMC conforming to EN/IEC 61000-6-2 EMC conforming to EN 50082-2 EMC conforming to EN 50081-1
IP degree of protection
IP20 conforming to EN/IEC 60529
Ambient air temperature for storage
-25...70 °C
Relative humidity
0...95 % without condensation or dripping water
Class of protection against electric shock
Class I conforming to VDE 0106-1
Dielectric strength
500 V between outputs 500 V between output and ground 3000 V between input and output 3000 V between input and ground
2
Product data sheet Dimensions Drawings
ABL8REM24030
Regulated Switch Mode Power Supply Dimensions and Mounting Mounting on a 35 mm/1.37 in. or 75 mm/2.95 in. Rail
3
Product data sheet
Connections and Schema
ABL8REM24030
Regulated Switch Mode Power Supply Internal Wiring Diagram
Regulated Switch Mode Power Supplies Series or Parallel Connection Series Connection
(1)
Two Shottky diodes Imin = power supply In and Vmin = 50 V
Parallel Connection
Family
Series
Parallel
ABL 8REM/7RP
2 products max.
2 products max.
Series or parallel connection is only recommended for products with identical references.
4
Product data sheet Performance Curves
ABL8REM24030
Regulated Switch Mode Power Supplies Derating The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced. The nominal ambient temperature for the Optimum range of Phaseo power supplies is 50 °C. Above this temperature, derating is necessary up to a maximum temperature of 60 °C. The graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the ambient temperature.
X (1)
Maximum operating temperature (°C) ABL 8REM, ABL 7RP mounted vertically
Derating should be considered in extreme operating conditions: ● Intensive operation (output current permanently close to the nominal current, combined with a high ambient temperature) ● Output voltage set above 24 Vdc (to compensate for line voltage drops, for example) ● Parallel connection to increase the total power
Regulated Switch Mode Power Supply Load Limit
Regulated Switch Mode Power Supply Temporary Overloads
5
