Transcript
PORTABLE BEVELING MACHINE FROM STEELMAX
®
THE ABM26 PORTABLE AUTO-FEED BEVELING MACHINE SELF-PROPELLED PLATE BEVELING MACHINE WITH ROTARY MILLING HEAD The Steelmax ABM26 self-propelled portable beveling machine uses a rotary milling head in conjunction with an auto feed travel motor to produce high-quality machined bevels on all types of ferrous or non-ferrous steel plate. The guide rail system used with ABM26 can be quickly and efficiently installed on the workpiece through the use of self-aligning rail clamps. For long plates, the length of the guide rail can be increased by adding additional rails or progressive indexing of individual rail sections. Once the machine is installed on the plate minimal operator involvement is required. The regulated travel speed of the auto feed carriage ensures a smooth and accurate bevel surface. As ABM26 can travel and mill in both directions, no time is wasted returning the machine to its start position on bevels that require multiple passes. The ABM26 uses a microprocessor-based control system that features variable-speed control and motor overload protection. FEATURES • Auto feed at regulated travel speed • Rapid setup rail clamping system • Variable speed control for work on a variety of material and thickness • Produces a wide range of bevel angles • Motor overload with flashing LED warning indicator • J groove beveling available on request
Maximum bevel width depending on the angle
1-87STEELMAX
β
0°
30°
45°
60°
75°
b
1-3/8" (35 mm)
1-1/8" (29 mm)
1" (26 mm)
1-1/8" (29 mm)
1-3/8" (35 mm)
www.steelmax.com
31
J Groove Beveling The SM-ABM-26 can do J-groove beveling by means of optional J-groove milling head and appropriate angle attachment.
This option is available on customer’s request. Please contact us to get more information.
32
1-87STEELMAX
STEELMAX.COM
[email protected]
Fax: 303-690-9172
OPTIONAL & SPARE EQUIPMENT SM-GLW-000013
Milling head
SM-PLY-000197
Special geometry cutting insert (1 piece), sold 10 pcs/box
SM-GLW-000014
Milling head for J-groove beveling R6
SM-PLY-000198
Cutting insert for J-groove beveling R6 (1 piece), sold 10 pcs/box
SM-GLW-000015
Milling head for J-groove beveling R8
SM-PLY-000201
Cutting insert for J-groove beveling R8 (1 piece), sold 10 pcs/box
SM-SGM-0152-04-01-00-2
Guide track (1 segment) L=1200 mm (47-1/4") (photo 8)
SM-UST-0152-04-04-00-2
Track clamp for plate thickness up to 35 mm (photo 1)
SM-UST-0152-15-01-00-0
Track clamp for plate thickness up to 70 mm (photo 2)
SM-ZCS-0152-04-02-00-1
Clamp for plate thickness up to 35 mm (photo 6)
SM-ZCS-0152-15-02-00-0
Clamp for plate thickness up to 70 mm (photo 7)
SM-UCW-0152-04-03-00-1
Auxiliary bracket (photo 5)
SM-WSP-0152-03-03-00-0
0° Angle attachment
SM-WSP-0152-03-14-00-0
12° Angle attachment
SM-WSP-0152-03-05-00-0
15° Angle attachment
SM-WSP-0152-03-07-00-0
20° Angle attachment
SM-WSP-0152-03-10-00-0
22.5° Angle attachment
SM-WSP-0152-03-09-00-0
25° Angle attachment
SM-WSP-0152-03-02-00-0
30° Angle attachment
SM-WSP-0152-03-15-00-0
35° Angle attachment
SM-WSP-0152-03-11-00-0
37.5° Angle attachment
SM-WSP-0152-03-12-00-0
40° Angle attachment
SM-WSP-0152-03-01-00-0
45° Angle attachment (photo 3)
SM-WSP-0152-03-13-00-0
50° Angle attachment
SM-WSP-0152-03-08-00-0
55° Angle attachment
SM-WSP-0152-03-04-00-0
60° Angle attachment
SM-WSP-0152-03-14-00-0
12° Angle attachment with height adjustment (photo 4)
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Any additional angle attachment up to 75°, on customer’s request Photo 6
Photo 8
Photo 7
The Steelmax ABM-26 can be used for long plate beveling by means of 3 guide tracks, hence length of plate is unlimited.
1-87STEELMAX
www.steelmax.com
33
PORTABLE BEVELING MACHINE FROM STEELMAX
®
ABM26 Technical Specifications Part number
SM-ABM26 (115V/50-60Hz) SM-ABM26-230 (230V/50-60Hz)
Motor power
1500W 2.0 HP
Feed speed (for steel)
max 19-11/16"/min (500 mm/min)
Beveling width
1-3/8" (0 - 35 mm)
Angles range
0° - 60°, 75° on special order
Feed system
AUTO
Dimensions (LxWxH) 14-9/16" x 20-1/2" x 16-1/8"* (370 x 520 x 410 mm*) Weight
118 lbs 10 oz** (55 kg**)
* without guide track ** with 2-section guide rail and guide rail clamps/3 pcs
Standard shipping set: • Carriage mounted on one guide track • 2nd guide track for total length of 95" (2413 mm) • Milling head equipped with 7 special geometry cutting inserts • 4 angle attachments (0°, 22.5°, 37.5°, and 45°) • 3 track clamps for plate thickness up to 35 mm • 2 clamps for plate thickness up to 35 mm • Set of keys • Operator’s manual
112 Inverness Circle E, Ste F, Englewood, CO 80112 For ordering and customer service, or to request detailed product information or demonstration videos, contact:
34
ABM26 06/2012
1-87STEELMAX
STEELMAX.COM
[email protected]
All information is subject to change without notice.
Fax: 303-690-9172 ©2012 STEELMAX
