Transcript
About This Product
Users Manual About This Product This chapter provides product overview and operating environments.
1 Features ........................................................................................2 2 Parts on this product .....................................................................3 Parts and function .........................................................................3 3 About the push switch ...................................................................4 Factory default ..............................................................................4 Diagnostic/configuration report .....................................................4 4 Software specifications .................................................................5 Supported protocols ......................................................................5 Supported OS ...............................................................................5 5 Hardware specifications ................................................................6 6 About the CX User Software .........................................................7
1
About This Product
1 Features
Users Manual
This product is a print server that supports 10BASE-T/100BASE-TX and has a USB 2.0 Full speed connection for Canon printers.
TIP
- This product enables you to use a printer with a USB interface even from Windows NT 4.0 and Windows 95 OSR2 or lower. However, a printer driver for each OS has to be available.
This product has the following features: - Supports the Canon Bubble Jet Printer Series, printers equipped with CAPT and multifunction printer (MFP). In addition to a traditional print server function, the scanner function, memory card reader function, and fax function are available over a network if you use this product with a Canon MFP. - Supports the status monitor that came with Canon printer driver. The CX Print port enables you to use the status monitor that is bundled with your Canon printer driver. The status monitor visually shows printing job status and ink level information. - Some printers may not support the status monitor. For support information, please visit the Canon Web page.
Note - Easy configuration using the bundled utility and the embedded Web server. This product can be configured and connected to a Canon MFP easily by the bundled utility and the embedded Web server. - Security features(IP Filter) This product allows to accept/deny the communication from a pre-registered IP address scope. IP filtering can prevent unauthorized network access.
2
About This Product
Users Manual 2 Parts on this product Parts and function [TOP]
[SIDE] (1)10BASE LINK LED (Green) (2)100BASE LINK LED (Green) (3)STATUS LED (Orange)
(5) Push Switch
[BACK] (6) STATUS LED(Orange) (7) LINK LED(Green) (8) Power Connector
[BOTTOM]
(4) Ethernet Address(The last 6 digits are the product's serial number)
[Top] The LED on the board can be checked. (1)10BASE LINK LED(Green) Lights when a proper 10BASE-T network connection is established. (2)100BASE-TX LINK LED(Green) Lights when a proper 100BASE-TX network connection is established. (3)STATUS LED(Orange) Flashes during the communication. [BOTTOM] (4) Ethernet Address The Ethernet Address of this product. The last 6 digits are the product's serial number.
NOTE
-If the Ethernet Address is 00:80:92:00:17:B0, it is marked as 0080920017B0. The products number (serial number) is 0017B0.
(10) USB Port (9) Network Port (10BASE-T/100BASE-TX)
[SIDE] (5) Push Switch By pushing the push switch, this product can be reset to the factory default settings and print a diagnostic report. Refer to About the push switch in this chapter. [BACK] (6) STATUS LED (Orange) Blinks during the communication. (7) LINK LED (Green) Lights when a proper network connection is established. (8) Power Connector Connects to the AC adapter. (9) Network Port (10BASE-T/100BASE-TX) Connects to the network cable. (10BASE-T/100BASE-TX Auto-detection) (In 100BASE-TX environment, use category 5 or above) (10)USB Port Connects to a printer or a MFP.
3
About This Product
Users Manual 3 About the push switch Factory default 1. Remove the AC plug from the electric outlet. 2. Push and hold the push switch while re-inserting the AC plug into the electric outlet. Continue holding. 3. The STATUS LED(Orange) will light when the factory default configuration settings have been restored. Release the push switch.
TIP
- If this product has been used in another network, reset it to the factory default settings before you start the configuration. - Do not turn off this product while resetting to factory default. - When you turn on this product after factory default configuration, do not push switch.
Diagnostic/configuration report While this product is in use, push the push switch for more than 5 seconds. The Diagnostic/Configuration report will be printed. This is available only with printers with fonts.
TIP
- Diagnostic/Configuration report is not available with Canon Bubble Jet Printer. Do not use the push switch function.
4
About This Product
Users Manual 4 Software specifications Supported protocols Raw(9100)Port, LPD, FTP, IPP, HTTP, TELNET, DHCP, BOOTP, SNMP, NetBIOS over TCP, WINS,TCP, UDP, ARP, RARP, IP, ICMP, IPX Peer to Peer Supports silex technology, Inc. original protocol. NetBEUI SMB, NetBIOS TCP/IP
TIP
- Windows embedded printing client functions; LPR/ IPP/FTP are not supported when you connect this product to CAPT compatible printers.
Supported OS Print server:Windows 95/98/Me/ NT 4.0/2000/XP/Server 2003 Scanner server:Windows 2000/XP Storage server:Windows 95/98/Me/ NT 4.0/2000/XP/Server 2003
TIP
- The bundled application, SX Virtual Link is available only for Windows 2000, Windows XP. - The SX Virtual Link is not available if a printer driver and bundled utility for each OS are not provided. For support information, please visit the Canon Web page.
5
About This Product
Users Manual 5 Hardware specifications Operating environment
:
Storage environment
:
EMI CPU Memory Network interface Device interface Others
: : : : : :
Temperature:+10°C to +35°C, +50°F to +95°F Humidity:20% to 80% Temperature:-10°C to +50°C, +14°F to +122°F Humidity:20% to 90% VCCI Class B / FCC Class B / EN55022 Class B / EN55024 32bit RISC CPU RAM: 8MByte / FlashROM:1MByte 10BASE-T/100BASE-TX 1 port.(automatic detection) USB2.0 Full Speed(A Type): 1 port Push Swtich:1 button LED TOP : 10BASE LINK(Green), 100BASE LINK(Green), STATUS(Orange) BACK: STATUS(Orange), LINK(Green)
Emission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EN55022 Class-B EN55024 6
About This Product
Users Manual 6 About the CX User Software The CX User Software includes the configuration utility, the print utility, the USB device connection utility, and the users manual.
< Screen menu > Readme This contains important information including cautions and a contact list for this product. Please read this first. Print Server Setup Starts the configuration utility of this product.
Application Installation Starts the installer of the following. Print utility, CX Print USB device connection utility, SX Virtual Link Manual Displays the users manual for this product (operation manual).
7
