Transcript
No.: B-12M0041 Date of issue: Dec. 20, 2012
AC Adapter / Battery Charger / DC Inlet ADC-13
DATA SHEET
The ADC-13 supplies required DC power exclusively for Fujikura Fusion Splicers. Three functions are available on it, as AC adapter, battery charger and external DC power inlet. The ADC-13 is supplied with Fusion Splicers, FSM-60S, FSM-60R, FSM-18S, and FSM-18R, as a standard item. ADC-13 SPECIFICATION Kind of power inlet AC power supply Battery charging
External DC power supply
Input Power cord Battery / Capacity Charging voltage Battery charge cord Input Power cord
Power supply selection High voltage protection circuit Use for Usage Dimensions and Weight
AC, External DC and battery charging 100V to 240V AC, 50Hz to 60Hz Fujikura's AC power cords: ACC-13 ～ 17 Fujikura's battery pack: BTR-08 / 4.0Ah 13.2V Fujikura's battery charge cord: DCC-14 10V to 15V DC Fujikura's DC power cords: DCC-12 (Cigarette lighter plug), DCC-13 (Alligator clamps) Automatic Available (High input indicator equipped) FSM-60S, FSM-60R, FSM-18S, FSM-18R Power supply: Sloted into the above splicers Battery charging: Connecting to the battery as shown the photo below 120W x 117D x 38H (mm), 0.34kg
BTR-08
POWER CORDS AC/DC Model
【AC】 ACC-14
ACC-15
【DC】 DCC-12
ACC-17
DCC-13
Type of plug
DCC-14
Model
Japan USA
ACC-16
Type of plug ADC-13
Battery charging Specifications and descriptions are subject to change without prior notice.
