Transcript
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD
Features:
16 CWDM Wavelengths Available 23dB Power Budget Build-in Isolator Optional Hot-Pluggable Duplex LC Connector Single +3.3V Power Supply Operating Temperature from 0°C to +70°C Monitoring Interface, Compliant with SFF-8472 Compliant with ITU-T G694.2 Compliant with Telcordia (Bellcore) GR-468-CORE Designed to Meet Laser Class1 Compliant with IEC60825-1 With Real Time Monitors of 9 Transmitter Output Power 9 Receiver Input Power 9 Laser Bias Current 9 Temperature 9 Supply Voltage
Applications:
Metro/Access Networks Gigabit Ethernet 1×Fiber Channel Other Optical Links
Description: Topticom's CWDM Transceiver products provide optical networking equipment manufacturers with a timely and cost effective tool in supporting the unceasing demand for higher bandwidth equipment build-outs in the enterprise access and metropolitan area networks. There are 16 center wavelengths available from 1270nm to 1610nm. The 20nm channel spacing allows for un-cooled laser operation, a high yield manufacturing process, and lower cost Mux/Demux technology, thus providing a complete cost effective solution for various data and telecom applications.
Specification: z Electrical and Optical Characteristics (Condition: Tc= Top) Parameter Symbol Min. Typical Transmitter Differential Input Voltage +/-TX_DAT 200 Supply Current ICC 130 Tx_Disable Input Voltage – Low VIL 0 Tx_Disable Input Voltage – High VIH 2.0 Tx_Fault Output Voltage – Low VOL 0 Tx_Fault Output Voltage – High VOH 2.0
Max. 2400 180 0.8 Vcc 0.8 Vcc
Unit mV p-p mA V V V V
Anshan Topticom Technology Co.,ltd Page 1 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD Receiver Differential Output Volt Rx_LOS Output Voltage- Low Rx_LOS Output Voltage- High TX Parameter Data Rate Output Center Wavelength(0~70°C) Output Spectral Width Average Output Power Extinction Ratio Rise and Fall Time (20~80%) Data Input Voltage-High Data Input Voltage -Low Supply Current Output Optical Eye RX Parameter Date Rate Receive Sensitivity Maximum Input Power Operating Wavelength Signal Detect Threshold-Assertion: Signal Detect Threshold-Deassertion: Hysteresis Supply Current Rise and Fall Time (20~80%) Output High Voltage Output Low Voltage Alarm Output Interface
+/-RX_DAT VOL VOH Symbol B λC △λ PO E.R. Tr VIHS VILS ICC
600 0 2.0
1400 0.8 Vcc
Min. Typical Max. 1.25 λ-4 λ+7.5 λ 1 -2 +3 10 0.26 Vcc-1.16 Vcc-0.89 Vcc-1.82 Vcc-1.48 120 Compliant with IEEE802.3
Symbol B S Pmax λc SDHIGH SDLOW
Min. -3 1100
Typical 1.25 -
ICC Tr/Tf VOH VOL
2.0 -
Vcc-1.03 Vcc-1.82
LV-TTL
Unit Gb/s nm nm dBm dB ns V V mA
Max. -25 1620
Unit Gb/s dBm dBm nm
-26
dBm dBm
-36
-
mV p-p V V
100 0.29 Vcc-0.89 Vcc-1.63
dBm mA ns V V
z Absolute Maximum Ratings (TC=25℃) Parameter Storage Temperature Operating Temperature Supply Voltage Output Current
Symbol Tst Top Vcc Io
Min. -40 0 0 0
Max. +85 +70 Vcc 30
Unit °C °C V mA
Min. +3.1
Max. +3.5
Unit V
z Recommended Operating Environment: Parameter Supply Voltage
Symbol VCC
Anshan Topticom Technology Co.,ltd Page 2 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD Ambient Operating Temperature
TA
0
°C
70
z Timing Characteristics: Parameter TX_DISABLE Assert Time TX_DISABLE Negate Time Time to Initialize Include Reset of TX_FAULT TX_FAULT from Fault to Assertion TX_DISBEL Time to Start Reset Receiver Loss of Signal Assert Time (Off to On) Receiver Loss of Signal Assert Time (On to Off)
Symbol t_off t_on t_int t_fault t_reset TA,RX_LOS Td,RX_LOS
Min.
Typical 3 0.5 30 20
Max. 10 1 300 100
10 100 100
Unit Usec msec msec Usec Usec Usec Usec
z Digital Diagnostic Monitor Characteristics: Parameter Tx Output Power Accuracy Rx Input Power Accuracy Laser Bias Current Accuracy Transceiver Internal Temperature Accuracy Transceiver Internal Supply Voltage Accuracy
Min. ±3.0 ±3.0 ±1 0 ±3.0 ±0.1
Unit DBm DBm % °C V
Block Diagram of Transceiver: +Tx_ DAT -Tx_ DAT
LD Driver
LD
Tx_ Disable Tx_ Fault MOD_DEF(0) MOD_DEF(1) MOD_DEF(2)
Optical Sub-assembl
Duplex LC Receptacle
MOD DEF
+Rx_ DAT -Rx_ DAT
Post-Amp
PreAmp
Rx LOS
Anshan Topticom Technology Co.,ltd Page 3 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD
Pin Assignment:
Pin out of Connector Block on Host Board Pin Description:
Notes:
Anshan Topticom Technology Co.,ltd Page 4 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD 1. 2. 3. 4.
Circuit ground is internally isolated from chassis ground. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
Serial ID Memory Contents: Data Address
Length (Byte)
Name of Length
0 1 2 3-10 11 12 13-14 15 16 17 18 19 20-35 36 37-39 40-55 56-59 60-62 63
1 1 1 8 1 1 2 1 1 1 1 1 16 1 3 16 4 3 1
Identifier Reserved Connector Transceiver Encoding BR,Nominal Reserved Length(9um) Length(50um) Length(62.5um) Length(Copper) Reserved Vendor Name Reserved Vendor OUI Vendor PN Vendor rev Reserved CCID
64-65
2
Option
66 67 68-83 84-91 92-94 95
1 1 16 8 3 1
BR, max BR, min Vendor SN Date code Reserved CCEX
96-127
32
Description and Contents Base ID Fields Type of Serial transceiver (03h=SFP) Extended identifier of type serial transceiver (04h) Code of optical connector type (07=LC) Gigabit Ethernet 1000Base-SX & Fiber Channel 8B10B (01h) Nominal baud rate, unit of 100Mbps (0000h) Link length supported for 9/125um fiber, units of 100m Link length supported for 50/125um fiber, units of 10m Link length supported for 62.5/125um fiber, units of 10m Link length supported for copper, units of meters SFP vendor name: Hi-Optel SFP transceiver vendor OUI ID Part Number: “HCSFP-xxxxxx” (ASCII) Revision level for part number Least significant byte of sum of data in address 0-62 Extended ID Fields Indicates which optical SFP signals are implemented (001Ah = LOS, TX_FAULT, TX_DISABLE all supported) Upper bit rate margin, units of % Lower bit rate margin, units of % Serial number (ASCII) Hi-Optel’s Manufacturing date code
Check code for the extended ID Fields (addresses 64 to 94) Vendor Specific ID Fields Readable Hi-Optel specific date, read only
Anshan Topticom Technology Co.,ltd Page 5 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD
Serial ID Memory Contents: (A2H) Address 00-01 02-03 04-05 06-07 08-09 10-11 12-13 14-15 16-17 18-19 20-21 22-23 24-25 26-27 28-29 30-31 32-33 34-35 36-37 38-39 40-55
# Bytes 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 16
Name Temp High Alarm Temp Low Alarm Temp High Warning Temp Low Warning Voltage High Alarm Voltage Low Alarm Voltage High Warning Voltage Low Warning Bias High Alarm Bias Low Alarm Bias High Warning Bias Low Warning TX Power High Alarm TX Power Low Alarm TX Power High Warning TX Power Low Warning RX Power High Alarm RX Power Low Alarm RX Power High Warning RX Power Low Warning Reserved
Description MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address Reserved for future monitored quantities
Address
# Bytes
Name
Description
56-59
4
Rx_PWR(4)
Single precision floating point calibration data - Rx optical power. Bit 7 of byte 56 is MSB. Bit 0 of byte 59 is LSB.
60-63
4
Rx_PWR(3)
Single precision floating point calibration data - Rx optical power. Bit 7 of byte 60 is MSB. Bit 0 of byte 63 is LSB.
64-67
4
Rx_PWR(2)
Single precision floating point calibration data, Rx optical power. Bit 7 of byte 64 is MSB, bit 0 of byte 67 is LSB.
68-71
4
Rx_PWR(1)
Single precision floating point calibration data, Rx optical power. Bit 7 of byte 68 is MSB, bit 0 of byte 71 is LSB.
72-75
4
Rx_PWR(0)
Single precision floating point calibration data, Rx optical power. Bit 7 of byte 72 is MSB, bit 0 of byte 75 is LSB.
76-77
2
Tx_I(Slope)
Fixed decimal (unsigned) calibration data, laser bias current. Bit 7 of byte 76 is MSB, bit 0 of byte 77 is LSB.
78-79
2
Tx_I(Offset)
Fixed decimal (signed two’s complement) calibration data, laser bias current. Bit 7 of byte 78 is MSB, bit 0 of byte 79 is LSB
Anshan Topticom Technology Co.,ltd Page 6 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD Fixed decimal (unsigned) calibration data, transmittercoupled output power. Bit 7 of byte 80 is MSB, bit 0 of byte81 is LSB. Fixed decimal (signed two’s complement) calibration data, transmitter coupled Tx_PWR(Offset) output power. Bit 7 of byte 82 is MSB, bit 0 of byte 83 is LSB. Fixed decimal (unsigned) calibration data, internal module T(Slope) temperature. Bit 7 of byte 84 is MSB, bit 0 of byte 85 is LSB. Fixed decimal (signed two’s complement) calibration data, internal module T(Offset) temperature. Bit 7 of byte 86 is MSB, bit 0 of byte 87 is LSB. Fixed decimal (unsigned) calibration data, internal module supply voltage. Bit 7 V(Slope) of byte 88 is MSB, bit 0 of byte 89 is LSB.
80-81
2
82-83
2
84-85
2
86-87
2
88-89
2
90-91
2
V(Offset)
92-95
4
Reserved
Byte Bit 96 97 98 99 100 101 102 103 104 105 106 107 108 109
All All All All All All All All All All All All All All
110
7
110
6
110
5
110
4
110
3
110 110 110
2 1 0
Tx_PWR(Slope)
Fixed decimal (signed two’s complement) calibration data, internal module supply voltage. Bit 7 of byte 90 is MSB. Bit 0 of byte 91 is LSB. Reserved
Name
Description Converted analog values. Calibrated 16 bit data Temperature MSB Internally measured module temperature. Temperature LSB Vcc MSB Internally measured supply voltage in transceiver. Vcc LSB TX Bias MSB Internally measured TX Bias Current. TX Bias LSB TX Power MSB Measured TX output power. TX Power LSB RX Power MSB Measured RX input power. RX Power LSB Reserved MSB Reserved for 1st future definition of digitized analog input Reserved LSB Reserved for 1st future definition of digitized analog input Reserved MSB Reserved for 2nd future definition of digitized analog input Reserved LSB Reserved for 2nd future definition of digitized analog input Optional Status/Control Bits TX Disable State Digital state of the TX Disable Input Pin. Not supported. Read/write bit that allows software disable of laser. Soft TX Disable Not supported. Reserved Digital state of the SFP RX Rate Select Input Pin. RX Rate Select State Not supported. Soft RX Rate Select Read/write bit that allows software RX rate select. Not supported. TX Fault Digital state of the TX Fault Output Pin. LOS Digital state of the LOS Output Pin. Data Ready Indicates transceiver has achieved power up and data is ready
Anshan Topticom Technology Co.,ltd Page 7 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD 111 7-0 Byte Bit 112 112 112 112 112 112 112 112 113 113 113 113 113 113 113 113 114 115 116 116 116 116 116 116 116 116 117 117 117 117 117 117 117 117 118 119
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 All All 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 All All
Byte 120-127
Reserved
Reserved.
Name
Description Reserved Optional Alarm and Warning Flag Bits Temp High Alarm Set when internal temperature exceeds high alarm level. Temp Low Alarm Set when internal temperature is below low alarm level. Vcc High Alarm Set when internal supply voltage exceeds high alarm level. Vcc Low Alarm Set when internal supply voltage is below low alarm level. TX Bias High Alarm Set when TX Bias current exceeds high alarm level. TX Bias Low Alarm Set when TX Bias current is below low alarm level. TX Power High Alarm Set when TX output power exceeds high alarm level. TX Power Low Alarm Set when TX output power is below low alarm level. RX Power High Alarm Set when Received Power exceeds high alarm level. RX Power Low Alarm Set when Received Power is below low alarm level. Reserved Alarm Reserved Alarm Reserved Alarm Reserved Alarm Reserved Alarm Reserved Alarm Reserved Reserved Temp High Warning Set when internal temperature exceeds high warning level. Temp Low Warning Set when internal temperature is below low warning level. Vcc High Warning Set when internal supply voltage exceeds high warning level. Vcc Low Warning Set when internal supply voltage is below low warning level. TX Bias High Warning Set when TX Bias current exceeds high warning level. TX Bias Low Warning Set when TX Bias current is below low warning level. TX Power High Warning Set when TX output power exceeds high warning level. TX Power Low Warning Set when TX output power is below low warning level. RX Power High Warning Set when Received Power exceeds high warning level. RX Power Low Warning Set when Received Power is below low warning level. Reserved Warning Reserved Warning Reserved Warning Reserved Warning Reserved Warning Reserved Warning Reserved Reserved # Byte 8
Name Vendor Specific
Description 00h.
Anshan Topticom Technology Co.,ltd Page 8 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD 128-255
128
Writable Memory
Mechanical Dimensions:
Anshan Topticom Technology Co.,ltd Page 9 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
CWDM SFP Transceiver with DDMI (TTP8 6XX4D-3) 1.25Gb/S, SFP Pluggable, Duplex LC, +3.3V 1270~1610nm, DFB-LD
Recommended Circuit:
Note: In the Part No. of
TTP8 6XX4D-3
, XX stands for wavelength, such as:
27: for 1270nm, 29: for 1290nm, 31: for 1310nm, 33: for 1330nm, 35: for 1350nm, 37: for 1370nm, 39: for 1390nm, 41: for 1410nm, 43: for 1430nm, 45: for 1450nm, 47: for 1470nm, 49: for 1490nm, 51: for 1510nm, 53: for 1530nm, 55: for 1550nm, 57: for 1570nm, 59: for 1590nm, 61: for 1610nm.
Anshan Topticom Technology Co.,ltd Page 10 of 10 Floor 3, Building 6, Laser Industrial Park, Yueding Road, New and High-tech Zone, Anshan City, Liaoning Province, China. Tel: +86 755 3682 1780 Fax: +86 755 2161 2318 Issued Date: 2011-06-15 Web: www.topticom.com E-mail:
[email protected] Http://topticom.en.alibaba.com
