Access Control - Building Products Index

Transcript

A CCESS CONTROL Prastel’s range of Access control offers a wide variety of products and technologies ranging from simple standalone systems to multidoor computer controlled access systems. Access controll allows the restriction of access to users and authorised vehicles through any type of passageway (doors, gates garage etc.) using devices such as badges, transponder tags, radio transmitters etc., instead of the traditional key. This technology is articulated on several levels • Simple autonomous systems called STAND ALONE READERS The use of an access control system allows control over the inward and outward passage of staff or vehicles through a passageway or gate. The use of an Access Control system allows staff movements can be managed without the use of dedicated personnel Effectively, the control takes place when the user activates a transmitter or presents a tag or badge to the reader; this sends the data to the access control unit that checks the enabling (consensus) before allowing access through the passageway. In the case of a developed system managed with a PC, access restrictions can be assigned to each single user: • • • • limited number of entries entries in certain time slots limited validity of the badge anti-pass back • Simple systems composed of a stand alone reader and control unit Reader • Developed systems composed of readers and control units manageable through a PC Control unit Reader A CCESS CONTROL ACCESS CONTROL STAND ALONE SYSTEMS Stand-alone system are a simple way to controling access using a single self contained product or a separate reader and controller. Stand-alone systems, are easy to use; controling access to a limited number of users through 1 or 2 passageways. The typical installation include controlling passageways in civil or industrial applications, whose number of users is proportional to the system’s simplicity of use, in which no additional special functions are requested. Prastel’s stand-alone system range includes external keypads and proximity readers. The keypads allow the management of 500 users and the control of 2 passageways through the 4 digit codes, one with a vandal-proof metal box and one with a box in ABS. The EASYMINI proximity reader has a 50 users capacity, controlling a single passageway using badges or proximity tags. ILLUMINATED KEYPAD STAND ALONE RANGE Number of users Relay outputs/number of passageways Single code management EASYMINI EASYPL EASYBKA 50 500 500 1 NO 2 YES 2 YES 5 S TAND ALONE SYSTEMS with keypad EASYPL Access control unit with backlite keypad (red), suitable for external applications (resinate electronics) controls up to 500 users using 4 digit codes. backlite 2 relay outputs 5A X 2 two-colour warning LED + buzzer X optical tamper X ABS box and 1m cable X X TECHNICAL SPECIFICATIONS Power supply: Power absorbed: Electric lock relay capacity: Auxiliary relay capacity: Input REX (opening button): Input AUX (In/monitor): Operating temperature: Protection rating: Dimensions and weight: EASYBKA 12-24 VAC/DC 75 mA in standby -- 115 mA max 5A 5A N.O. N.C. (monitor) N.O. (input) from -20 °C to +55 °C IP 65 137 x 44 x 29 mm - 178 g. Vandal-proof access control unit with blue backlite keypad, suitable for external applications (resinate electronics) controls up to 500 users using 4 figure codes. vandal-proof backlite X 2 output relays 5A X 2 two-colour warning LED + buzzer X optical tamper X selectable thermal heating X zama housing with 1 m cable X X TECHNICAL SPECIFICATIONS Power supply: Power absorbed Electric lock relay capacity: Auxiliary relay capacity: Input REX (opening button): Input AUX (In/monitor): Operating temperature: Protection rating: Dimensions and weight: 6 12-24 VAC/DC 75 mA in standby with illumination: 115mA max with heating: 12V DC: 615 mA with heating: 24V DC: 465 mA 2A 2A N.O. N.C. (monitor), N.O. (input) from -20 °C to +55 °C IP 65 120 x 76 x 21 mm - 410 g. S TAND ALONE SYSTEMS with proximity ACCESS CONTROL EASYMINI Miniaturised proximity reader with inbuilt relay. Any enrolled tag or badge presented to the reader will activates a relay (solid state) The output relay of the reader can be either impulsive or bistable The device’s IP67 reader (with resinate electronics) can be used externally and accomidates up to 50 different cards or tags. X X X X X X X miniaturised 50 users range 3-6 cm 1 relay output 2 A two-colour warning light + buzzer magnetic tamper ABS box IP67 and 1 m cable TECHNICAL SPECIFICATIONS Real size Power supply: Consumption: Reading technology: Range: PROX Memory capacity: N° output relays: Relay contact capacity: Signals: Operating temperature: Protection rating: Dimensions and weight: 12 VDC 30 mA proximity, 125 KHz 6 cm with card BDGPROX, 3 cm with tag TAG50 users 1 – impulsive (1 sec) or bistable. Selectable 2A @ 60 VDC (with inductive charge use tension suppressors) LED two-colour (red/green) and buzzer from -20 °C to +55 °C IP 67 28 x 92 x 12 mm - 165 g. EASYMINI Functions with cards and Tags BDGPROX ISOPROX TAGPROX TPROX (see page19) MTAG/MBPRO compatible unit available on request 7 A CCESS CONTROL CONTROL UNITS For more sophisticated applications Prastel offers a range of controller boards which allow more positive control over the flow of traffic through passageways. The boards include various models ranging from single door EASY200 (250 users) to 10000 multi controller networked system with facilties for software or on-board programing. The NEW MT10000/4 allowing management of up to 128 reader (32 Controllers) via a RS485 bus. Before deciding on an Access Control system the following questions should be asked to ensure selection of suitable system. • how many user need to be controlled • what type or readers or keypads and how many • do you need to individually control access per user • is monitoring or entry and exits required • is control over different user groups required • is controlling over different time slots required • is control over temporary badges, tags or transmitters required • is the system to be PC programable • how is connection to the system be accomplished, local RS232, Modem or LAN • is internet connection required • are modifying to management software required to meet the clients needs. C ONTROL UNITS ACCESS CONTROL CONTROL UNITS RANGE EASY200 M1000E M2000PE TTD3000 MT4000/2 MT10000/4 Stand alone system YES YES YES YES with keypad and display with keypad and display Control with software NO NO NO YES YES YES N° users 250 1000 2000 3000 4000 10000 N° readers/ passageways 1 1 2 2 2 4 Relay outputs 1 1 2 2 2 4 Additional outputs - - - 2 2 4 Single code control GTSYSTEM with GTSYSTEM YES YES YES YES YES Control with GTSYSTEMXP terminal YES YES YES NO NO NO Events memory - - - 1000 2000 16000 Antipassback NO NO YES YES YES YES Time slots NO NO NO YES YES YES User groups NO NO NO YES YES YES Network sharing NO NO NO Max 32 Max 32 Max 32 Keypad & display NO Integrated Integrated Integrated Optional Optional NB: All Prastel RS485 networked control units, may be adapted to suit personalised software using M5000P communication protocol available upon request. 9 C ONTROL UNITS EASY200 Simplified control unit, normally used on a door, gate, automation etc., to guarantee controlled access through the recognition of enabled cards. EASY200 accepts data coming from a reader in Wiegand format (default Wiegand 30 bit). Although it is very small, it can directly control an electric lock, thanks to its integrated relay with 5A contact capacity and manages an internal memory of 250 different user codes. X X X X X X X 250 users 1 input for reader 1 relay output 5A code self-learning function single code management both manual and with GTSYSTEMXP terminal user memory management using GTSYSTEMXP and WINGTSYSTEM ABS box TECHNICAL SPECIFICATIONS Power supply: Consumption: Input data format: Memory capacity: N° output relays: Relay contact capacity: Signals: Operating temperature: Protection rating: Dimensions and weight: 12 VAC/DC 80 mA Wiegand 26/30/37 bit (default Wiegand 30) 250 users 1 (1s Time lag or Bistable, selectable) 5A LED two colour (Red/green) from -20° to +55° C IP 44 100 x 55 x 21 mm - 62 g EASY200 1 READER PROXIMITY 10 CONTACT KEYBOARD up to 100 m MAGNETIC C ONTROL UNITS ACCESS CONTROL M1000E NEW Access Control Unit fitted with 1 input for 1 external reader Using the 4 button keypad and 3 digit display, new codes can be programmed in memory (a radio transmission for RF or via the connected reader cards or tags). Canceling single codes or all the codes, set the relay activation mode and time, setting a password is all accomplished via a simple sequence via the 4 button. 999 users 1 input for reader, activated through reader or remote control 433.920 MHz 1 relay output 5A 433.920 MHz receiver integrated for radio transmitters integrated keypad for programming users memory management with GTSYSTEMXP and WINGTSYSTEM ABS box for internal use or DIN rail mountable REX button input X X X X X X X X M2000PE Access control unit fitted with 2 inputs for external readers M2000PE has the same functions as the M1000E control unit , with the addition of separate relay control and adjustable times for each relay., memory partitioning and antipassback. The M2000PE has an inbuilt 22 channel 433MHZ receiver which may be set to receiver channels 1 to 4. The unit also offers a transfer facility to allow transfer of programmed data to another M2000PE control unit connected through a RS485 serial line. 2000 users 2 inputs for reader + RF input (parallel output) 2 relay outputs 5A, activated with readers or remote controls 433.920 MHz 433.920 MHz receiver integrated for radio transmitter integrated keypad for programming users memory management with GTSYSTEMXP WINGTSYSTEM ABS box for internal use on DIN rail REX inputs for both doors X X X X X X X X MKEYB All the operations on M1000E and M2000PE can be performed using the MKEYB remote keypad/display, connected to the unit through RS/485 and housed in a container for wall mounting or placed table. TECHNICAL SPECIFICATIONS Power supply: Consumption: Inputs: Relay outputs: Relay mode: Relay contact capacity: Programming: Operating temperature: Protection rating: Dimensions and weight: M1000E M2000PE 12 -24 VAC/DC min. 30 mA - max. 90 mA 1 Receiver 433.920 MHz, 4 CH 1 input Wiegand 26, 30, 37 bit (default Wiegand 30) 1 time lag 1 - 180s 5A with 4 keys and display Or with remote keypad MKEYB from -20° to +55° C IP 44 70x90x60 mm - 260 g 12 -24 VAC/DC min. 30 mA - max. 120 mA 1 Receiver 433.920 MHz, 4 CH 2 inputs Wiegand (default Wiegand 30) 2 independent time lag 1 - 180s 5A with 4 keys and display Or with remote keypad MKEYB from -20° to +55° C IP 44 105x90x60 mm - 320 g 11 C ONTROL UNITS TTD3000 TTD3000 is an access control terminal with keypad and display featuring dual creditial input (PIN code + proximity card). TTD3000 can control two passageways and two readers and may be as a stand alone unit or connected to a PC via SWAMIGO access control software; which may in turn be connected to existing or additional M, MT, and TTD series of control units. Reader protocols include Wiegand 26, 30 (default), 37 bit formats all of which can be customised if required.. The system communicates through the RS485 interface, using the same protocol as the M, MT, TTD, series control units, whch may be adapted by system integrators or developers if a personalised access control software is needed. Depending on programming ,inputs and outputs may be managed to trigger mulitiple alarm signals (break-in, door open, time etc.). X X X X X X X 3000 users 2 inputs for readers 1000 events off-line 2 relay outputs 5A 1 integrated proximity reader for memorising badges or tags integrated keypad and display for programming ABS box TECHNICAL SPECIFICATIONS The keypad and the illuminated display (16 characters x 2 lines) allow: • enabling of users • setting of time slots • programming of reader operating modes, input contacts and output relays. • Enabling and programming of anti-passback mode Readers and keys Power supply: Consumption: Inputs reader: Digital inputs: Relay outputs: Protocols accepted Time slots: Holidays: Anti-passback: User recognition: Operating temperature Protection rating: Dimensions and weight: 12 VAC/DC 100 mA with illumination display off 200 mA with illumination display on 2 for external readers + 1 reader MPROXMINI incorporated (in parallel with reader 1) 4 (2 configurable as break in inputs) 2 main (5A) and 2 auxiliary (1A) Wiegand 26, 30, 37 bit (Wiegand 30 default) 16 (4 time intervals for each time slot) 20 configurable at central or user level badge or badge + PIN code from keypad from -20 °C to +55 °C IP 44 215 x 198 x 55 mm - 1000 g RS232 max 10 m Readers max 100 m Relay outputs and inputs RS485 max 1000 m 12 Accessories control unit TTD3000 DC. 17 C ONTROL UNITS ACCESS CONTROL MT4000/2 NEW MT4000/2, is an evolution of M3000, is an access control unit capable of managing up to 4000 users with an off-line event memory buffer of 2000 events. It incorporates 2 inputs for readers and 2 main relay outputs as well as 2 auxiliary inputs and 2 auxiliary outputs. The system is programmed via SWAMIGO management software to control badge assignment ,user groups: • entries in time slots • limited number entries • temporary validity of the badge To manage more entries MT4000/2 can be connected to other MT and TTD series control units (network of control units). X X X X X X 4000 users 2 inputs for readers 2000 events off-line 2 relay output 5A code self learning function ABS box TECHNICAL SPECIFICATIONS Power supply: Consumption: Inputs reader: Auxiliary inputs: Relay outputs: Accepted protocols: Time slots: Holidays: Anti-passback: Operating temperature: Protection rating: Dimensions and weight: 12 VAC/DC 100 mA 2 2, configurable as breakin inputs 2 main (5A) and 2 auxiliary (1A) Wiegand 26, 30, 37 bit (Wiegand 30 bit default) 16 (4 time intervals for each time slot) 20 per year configurable at central or user level from -20 °C to +55 °C IP 44 215 x 300 x 85 mm - 1000 g The MW30 converter is available to connect the DATA CLOCK readers to the control units. Control unit accessories TTD3000 DC. 17 13 C ONTROL UNITS MT10000/4 NEW MT10000/4, is an evolution of M5000; capable of managing access for up to 10000 users with an off-line events memory buffer of 16000 events, the MT10000/4 incorporates 4 reader imputs and 4 main relay outputs and 4 auxiliary inputs and outputs relays. Using the SWAMIGO management software the system can be configured to limit access to user groups: • assign time slots • control the number of entries (or uses)• provide temporary access of badge or PIN. Where more then 4 entries are required the MT4000/2 form part of an M, MT or TTD controller network • assign time slots • control the number of entries (or uses) • provide temporary access of badge or PIN. Where more then 4 entries are required the MT4000/2 form part of an M, MT or TTD controller network. X X X X X X 10000 users 4 inputs for readers 16000 events off-line 4 relay output 5A Auto learning for badges ABS box TECHNICAL SPECIFICATIONS Power supply: Consumption: Reader inputs: Auxiliary inputs: Relay outputs: Time slots: Holidays: Anti-passback: Operating temperature Protection rating: Dimensions and weight: Series M3000, M5000 and M5000R, available while stocks last 14 12 VAC/DC 100 mA 4 4, configurable as monitored inputs/outputs 4 main (5A) and 4 auxiliary (1A) 16 (4 time intervals for each slot) 20 configurable at central or user level from -20 °C to +55 °C IP 44 215 x 300 x 85 mm - 1200 g C ONTROL UNITS M, MT, TTD series control units wiring diagram ACCESS CONTROL Each system is made up of at least 1 M, MT, or TTD series control unit and must include: - 1 power pack for each control unit (e.g. AL13V8A3) - 1 system software (SWAMIGO) - 1 connection interface (INT485C, INT485M, INTETHERNET) We recommend the use of CAT 5 cable, type FTP or STP for connecting control unit-reader and control unit control unit. NB:The power supply for electric locks, electric limit stops, external relays, must be isolated from those of the access control system to avoid generating interference in addition variators should be fitted to avoid damage to the access control panel. MT10000/4 board Max network Liaison 32 units 1÷32 centrales Use CAT. 5 type FTP or STP • UNIT - READER • UNIT - UNIT Max 10 m - RS232 (PIN to PIN 9 poles cable) Keypad clavier Radiocontrolled radio à distance Proximity proximité Magnetic magnetique 15 A CCESSORIES for control units SWAMIGO SWAMIGO is a Windows based software application developed specifically to configure and manage M, MT, and TTD series access control units. The software allows : X configuration one or more systems via serial (Com), Ethernet (TCP/IP) or modem. X management of up to 254 terminals per system X control over up to 16 time slots with 4 partitions per. The ability to enable and disable badges or card. X management of the user database X management of badges groups database. X display of ON-LINE the events of system transit and alarm. X download facility of OFF-LINE events. X creation of reports events and situations of badge assignment X restrictions on operators with access controlled by way passwords GTSYSTEMXP Handheld terminal for managing user memory for: • EASY200 - Allows memory transferance, adding or deleting single user codes • M1000E / M2000PE - Allows the memory upload and download and file management via WINGTSYSTEM and a PC. TECHNICAL SPECIFICATIONS Power supply: Consumption: Protection rating: Dimensions and weight: serie UNIK Tx EASYROLL WINGTSYSTEM for PC Radio receivers EASY200 12 VDC battery 300 mA IP44 105 x 205 x 38 mm - 1490 g M1000E WINGTSYSTEM WINGTSYSTEM is a software application that, linked with GTSYSTEMXP can manage memory modules of 433 MHz, 40. 6 MHz radio receivers and EASYROLL series radio receivers. It can also be used to connect directly to user memory of EASY200, M1000E and M2000PE control units. TECHNICAL SPECIFICATIONS Dimensions and weight: 16 M2000PE CD - 30 g A CCESSORIES for control units ACCESS CONTROL AL13V8A3 Switch mode power pack with battery charger for back-up battery,overload protection, short circuits and reverse polarity protection (for battery) for use with M, MT, and TTD series access control units. TECHNICAL SPECIFICATIONS Input power supply: Power absorbed: Output power: Max output current: Battery capacity: Operating temperature: Dimensions and weight: 230 VAC ± 10% 50/60Hz 13.8 VDC ± 1% 3A 12V - 15 Ah max from -20° to + 55° C 135 x 38 x 98 mm - 500 g INT485C The INT485C interface is designed for a connection between the PC and M, MT; TTD series control units, as well as the connection between the PC and the M1000E, M2000PE control unit. The INT485C interface converts RS232 format to RS485 format and vice versa. The characteristics of the RS485 bus allows transmission of data up to a distance of 1000 m. INT485M The INT485M interface is designed to make a connection between a modem and the M, MT, TTD access control systems. TECHNICAL SPECIFICATIONS INT485C and INT485M Power supply: Operating temperature: Consumption: INTETHERNET 9-12 VDC from -20° to + 55° C 15 mA Interface for connecting access control units (TTD3000, MT4000/2, MT10000/4) with Ethernet network. TECHNICAL SPECIFICATIONS Power supply: Power supply: Protocols supported: Speed: Certificates: Operating temperature: Dimensions and weight: External adaptor 230 VAC 30VDC @ 250mA max. ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP, HTTP from 300 baud to 115 Kbaud CE, FCC A, TUV, C/UL from -20° to + 55° C 23 x 64 x 90 mm - 350 g MDM20 Modem «US Robotics» analogical 56K for M, MT, TTD series access control units. M5000P Communication protocol for M, MT, TTD series control units (CD Rom + instructions complete with SWAMIGO software l for modifying the software 17 A CCESS CONTROL Readers and keys For access control systems, the reader is the device that read an electronic code contained within an electronic key or transmitter. • • • • • Magnetic strip readers card must be swiped through the reader head Contact readers a MCR20 tag must make contact with the reader Proximity readers reading occurs once the badge or tag is present within the reader field Radio readers a code is transmitted by a RF to a reciever Code keypads the client enters digits into the keypad Many different technologies are available as listed below. READERS/KEYS KEY/READER COMPATIBILITY Contact Radio MPROXMINI MEDIPROX MPROXUNI MEDIPROXUNI MRMAG MRMAGINOX ML2 MRRE – – – – • • – – • • • • • • • • • • • • • • • • • – – – – – – – – – – – – – – ISOPROX • • • • • – – – – MCR20 – – – – – – • – MDT2PROX • • • • – – – MPSTP2E – – – – – – – Proximity Magnetic CODE key MBADM MBADM1 MBADM4 DUALPROX TPROX TAGPROX BDGPROX 18 • • Readers and keys proximity ACCESS CONTROL MPROXMINI & MEDIPROX are proximity readers with both Wiegand or clock and data format. Compatible with all Prastel access control units that accept the Weigand 26/30 bit or dataclock protocol (transmission on specified cable should not excedd 100m). All the electronic components and the internal antenna are assembled in a completely resinated and self contained so as to offer a high degree of weather resistence (IP67). Characteristics common to both readers: X proximity reader technology 125 KHz X Prastel badge reader X two-colour LED + buzzer X ABS box IP67 X resinate electronics X 1 m cable MPROXMINI X avge reading distance, 3/6 cm TECHNICAL SPECIFICATIONS Power supply: Consumption: Operating temperature: Protection rating: Dimensions and weight: MEDIPROX 9 - 12 VDC 20 mA from -20° to + 55° C IP67 28 x 92 x 12 mm - 40 g X avge reading distance 6/8 cm TECHNICAL SPECIFICATIONS Power supply: Consumption: Operating temperature: Protection rating: Dimensions and weight: 9 - 12 VDC 20 mA from -20° to + 55° C IP67 43 x 80 x13 mm - 70 g Note for all readers: to programme the badges, follow the instructions of the control units to which they are connected. BDGPROX ISOPROX «Clamshell» shaped proximity badge, encrypted code PRASTEL IP67 Proximity Badge «ISO» format, encrypted code PRASTEL IP67 Dimensions and weight: 85x55x1 mm-20 g MDT2PROX 2-channel transmitter double technology Radio 433,920 MHz and Proximity tag incorporated Dimensions and weight: 85x55x1 mm-20 g TPROX Adhesive proximity chip miniature PRASTEL encrypted code Dim. ø 20 x 0.8 mm. TAGPROX Proximity tag with key holder encrypted PRASTEL. Dim. ø 35x55 mm IP67 DUALPROX Proximity badge + magnetic ISO format, PRASTEL encrypted code IP67 19 Readers and keys proximity MPROXUNI and MEDIPROXUNI, are multi-protocol proximity reader compatible with many other manufacture protocols as well as Prastel’s own 30 bit. Characteristics common to both readers: X multi-protocol X proximity reader technology 125 KHz X two-colour LED red and green + buzzer X ABS box IP67 X resinate electronics X 1 m cable MPROXUNI NEW MEDIPROXUNI NEW X avge reading distance 3/6 cm TECHNICAL SPECIFICATIONS Power supply: Consumption: Operating temperature: Protection rating: Dimensions and weight: X avge reading distance 6/8 cm TECHNICAL SPECIFICATIONS Power supply: Consumption: Operating temperature: Protection rating: Dimensions and weight: FORCE55 9 - 12 VDC 20 mA from -20° to + 55° C IP67 28 x 92 x 12 mm - 40 g 9 - 12 VDC 20 mA from -20° to + 55° C IP67 43 x 80 x13 mm - 70 g Metallic and Perspex vandal-proof box, flush mounting, for MPROXMINI, MPROXUNI, EASYMINI readers. TECHNICAL SPECIFICATIONS Protection rating: Dimensions and weight: NB: please follow the instruction relevant to the controller to which they are 20 IP67 50 x 120 x 25 mm - 290 g Readers and keys magnetic ACCESS CONTROL The MRMAG and MRMAGINOX readers of magnetic cards read the card information is coded onto track 2 in accordance with the ISO standards and is in CLOCK and DATA and CLS (the latter only for MRMAG) protocols. MRMAG uses the MW30 converter, supplied with the reader, the signals are converted in the Wiegand 30 bit format compatible with all the Prastel access control units and with all the systems that accept this data format. Characteristics common to both readers: X magnetic strip in ISO 7811 2 track X Reading mode: F2F (FM) X Card insertion speed 125 - 1250 mm/s X MW30 converter included X average life of reading head > 300.000 readings MRMAG TECHNICAL SPECIFICATIONS Power supply with MW30: Power supply without MW30: Max connection distance with MW30: Max connection distance without MW30: Consumption: Operating temperature: Protection rating: Dimensions and weight: MRMAGINOX 12 VDC 5 VDC 100 m 5m 10 mA from -20° to + 55° C IP44 30 x 100 x 33 mm - 100 g X vandal-proof stainless steel box X red and green two colour LED + buzzer X average life reading head > 1.000.000 readings TECHNICAL SPECIFICATIONS Power supply: Max connection distance with MW30: Consumption: Operating temperature: Protection rating: Dimensions and weight: 12 VDC 100 m 10 mA from -20° to + 55° C IP55 49 x 82 x 35 mm - 336 g Note for all readers: to programme the badges, follow the instructions of the control units to which they are connected. MAGNETIC BADGE: DUALPROX MBADM Proximity badge + magnetic ISO2 FORMAT IP67 (neutral) Magnetic badge ISO2 IP67 Dimensions et poids:85x55x1mm - 30 g Dimensions et poids:85x55x1mm - 30 g MBADM1 MBADM4 (I colour print) (4 colour print) converter for interfacing with magnetic badges outside the Prastel standard. For cards not manuMW30X Personalised factuered by Prastel are test for compatibility by sending at least 3 badges to Prastel. If the result is positive, an offer will be made for the design and development of a personalised converter. 21 Readers and keys Keypad and contact EASYBKW EASYBKW is a vandal-proof keypad reader The output in Wiegand (default Wiegand 30 bit) format allows the connection to the major part of the access control units present on the market. X X X X X blue illumination selectable data output Wiegand / Data clock intensive use box in Zama, vandal-proof resinate electronics TECHNICAL SPECIFICATIONS Power supply: Consumption: Protocol format: Operating temperature: Protection rating: Dimensions and weight: ML2 12 VDC 50 mA Wiegand 26/30 bit - data clock from -20°C to +55°C IP67 120 x 76 x 27 mm - 410 g ML2 is a key contact reader MCR20. It is compatible with all the Prastel access control units (Wiegand 30 bit) and with all the control units that accept this protocol. X X X X red/green warning light 1 Wiegand 30 bit output reading head in stainless steel ABS box TECHNICAL SPECIFICATIONS Power supply: Consumption: Operating temperature: Protection rating: Dimensions and weight: 12VDC 8mA from -20° to +55 °C IP54 73 x 80 x 33 mm - 260 g Note for all readers: to programme the codes, follow the instructions of the control units to which they are connected. ML2 operates with the contact key MCR20: MCR20 DALLAS type digital contact key Dim. 20 x 62 x 8 mm - 8 g IP67 22 Readers and keys Remote radio ACCESS CONTROL MRRE (433,920 MHz) The MRRE radio receiver is suitable to be connected to access control units. The code received from a transmitter is converted into a format compatible with the major part of the control units. This format can be selected using a dipswitch. X X X X transmitter channel address output protocol Wiegand 26/30/37, Dataclock, TTL, RS232 frequency 433,920 MHz 24 bit digital code TECHNICAL SPECIFICATIONS Power supply: Consumption: Stability frequency: Sensibility Operating temperature Dimensions and weight: 12 - 24 VAC/DC 30 mA ± 180 ppm less than 1 µV from - 20° to +55° C 140 x 110 x 40 mm - 230 g Note: the receiver is also available with 40.685 MHz (MRR) and 26.995 (MRRF) frequencies. Note for all readers: to programme transmitters follow the instructions of the control unit to which it is connected. MPSTP2E MDT2PROX The 2-channel transmitter MDT2PROX equipped with dual technology, radio 433.920 MHz + proximity, which allows the remote activation of an automation via a radio receiver or access through other passageways using the MPROXMINI type proximity reader. Common characteristics: X frequency 433.920 MHz X ROLLING safety code X remote self learning function on receiver TECHNICAL SPECIFICATIONS Power supply: Dimensions and weight: 2 lithium batteries 3 V (size 2025) 38 x 58 x 12 mm - 25 g MRRE also functions with the following transmitters/activators: MT2E-4E Rolling Code transmitter, 433.920 MHz, 280 billion of combinations Front keys 2-4 channels Lithium battery MPSTL2E-4E (433,920 MHz) 2-channel or 4-channel transmitter Unique code 2 billion combinations RADIOKEYB 4 channel keypad 433.920 MHz Multipass, Indoor IP41 MPSTF2E-4E (433,920 MHz) 2-channel or 4-channel transmitter Dip-switch, 1024 combinations Further information on transmitters see page 40 23 RADIO CONTROLS The evolution A radio controlled access control system composes at least one radio transmitter and a radio receiver, which by way of radio frequency technology activates a relay output or weigand transmission, from a distance. These system are commonly used to control automatic gates, or doors, garage doors, alarm systems, panioc buttons or simply to turn devices like garden lights on and off. PRASTEL have over 25 years experience in this industry and have proudly introduced many innovations and designs Among the most significant: 1999 MPSTP2E 2006 BFOR 1983 1984 1991 Transmitters with dip-switches technology (1024 combinations) 1993 Prastel introduces (R.P.A.).remote TX programming to recievers using an existing valid remote to enter programming mode.. 1996 Prastel introduces the possibility of remote controlling with an enabled transmitter the acceptance of new transmitters on an RX (R.P.A.). 1997 The MULTIPASS evolves to the more secure ROLLING-CODE. A variable code system that provides a unique code for each transmission, ensuring that Remote cloning is imposible. 1998 2000 Transmitters with multi-signalling LEDs (battery-saving, self-checking and optical transmission) 2004 Transmitters with dual technology (433.92 MHz radio + 125 KHz proximity) 2005 Easy-Roll system. Introduced a new dimension to RF access control by allowing an installer code to be added as a creditial to remotes ensuring an even higher level of security. This innovation also allows copy transmitters to be issued by authorized personal which are automatically entered in the memory replacing lost or stolen transmitters. 2006 “Remote Force Control“: RFC® function. This systems allows a valid Prastel remote to vary the limit settings on our range of gate control boards. In an emergencey or where weather condition prohibit normal usage RFC allows the gate force to be increase temporarily to allow the gate to operate. Transmitters with lateral buttons Prastel launches its revolution new self learning technology. With its differentiated TX codes matched to receivers,extractable memory modules and flexible control units, Prastel pioneered a new era of RF access control. The introduction of more secure RF transmission allowing RF to be used in the security conscious Access control industry. Transmitters with conductive rubber buttons and Lithium batteries BFOR Transmitter Over 12 million Prastel transmitters produced since 1983. RADIO CONTROLS The evolution ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS Some models produced by Prastel from 1980 to date 1991 2006 1980 1995 W NE BFOR 41 R ADIO CONTROLS transmitters summary table PRODUIT FREQUENCY CODE TYPE N° CODES MPSTF2E MPSTF4E DIP SWITCH 1024 frontal 2 4 100 m Alkaline battery 12V MPSTL2E MPSTL4E unique EEPROM sequential 4 billion lateral 2 4 100 m Alkaline battery 12V MT2EXP MT4EXP ROLLING CODE 280.000 billion sequential frontal 2 4 100 m 2 lithium batt. 3V MPSTP2EXP ROLLING CODE 2 x 1000 billion frontal EASYROLL (XP) can be sequential personalised 2 100 m 2 lithium batt. 3V BFOR ROLLING CODE 2 x 1000 billion frontal EASYROLL (XP) can be sequential personalised 2-4 100 m 1 lithium batt. 3V RADIOKEYB PIN CODE 4 50 m Alkaline battery 9 V 433,920 MHz 5 bit BUTTONS N° NOMINAL CHANNELS RANGE (m) frontal light WT2E radio 1024 frontal 2 50 m Alkaline battery 9 V MPSTL2 MPSTL4 unique EEPROM sequential 4 billion lateral 2 4 100 m Alkaline battery 12 V DIP-SWITCH PLL 1024 jumper radio 24 up to 10 Km selectable 40,685 MHz LINK43T4 43,3 MHz 42 POWER SUPPLY 12 Vdc RADIO CONTROLS receivers ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS summary table PRODUCT FREQUENCY N° USERS TX BOX COMPATIBILITY 50 RX1E all 433 no function N° USEABLE CHANNELS ANTENNA ABS 1 1 POWER SUPPLY EASYROLLXP MR1EXP 200 all 433 ABS MRA2EXP 200 all 433 ABS 2 external MR1E230Z 200 all 433 ABS 1 no function + EASYROLLXP UNDECAL BASE 433,920 MHz MRS2E 200 all 433 board molex MRBE200XP 200 all 433 ABS da 1 a 4 external MRBEXP 200 or 1000 all 433 internal da 1 a 4 MRA2 200 all 40,6 ABS 2 external MRB LINK43RB 40,685 MHz 43,3 MHz ANT433S ANT433SD ANT433AV 12/24 Vac/dc ANTFK4 ANT40,6 12/24 Vac/dc 2 200 or 1000 all 40,6 ABS from 1 external to 4 1024 LINK43T4 ABS from 1 internal to 4 ANT43 o ANT43S 12 Vdc 43 RADIOCONTROLS EASYROLL transmitters ROLLING CODE 433.92 MHz MPSTP2EXP EASYROLL transmitters are equipped with the E.R.P.A. function (which allows a valid copy remote to be inserted in place of a lost or stolen unit). . E.R.P.A. is the third evolution of PRASTEL’s Rolling code technology, allowing the insertion and simultaneous cancellation of a lost transmitter. In existing installations this easy to function to perform,simply pressing the transmit button on the copy remote (within 4-5 m of the receiver) enters the new remote into the system memory and removes the old transmitter. Once this simple operation has been performed, the new transmitter will be ready for use. Caratteristiche comuni: X multi-signal LED X nominal range 100 m X buttons in conductive rubber X key-holder cord BFOR W NE New Rolling Code transmitter, EASYROLL code control. Same characteristics as MPSTP2E. X 2 - 4 channels (with 3 buttons) X flat battery warning on LED X swivelling metal key-holder TECHNICAL SPECIFICATIONS Power supply: Consumption: Dimensions and weight: MPSTP2EXP 2 x 3 v lithium battery 20 mA 37 x 56,5 x 8 mm - 20 g Rolling Code Transmitter EASYROLL code control. MPSTP2EXP can be programmed via radio (proximity) without opening the package. X X X X X sequential codes 2 channels battery safe function battery saving function blister packaging TECHNICAL SPECIFICATIONS Power supply: Consumption: Dimensions and weight: MT2EXP MT4EXP 2 xX 3 V lithium,, batteries 20 mA 38 x 58 x 12 mm - 25 g 433.92 MHz Rolling Code transmitter front buttons 2 or 4 channels. Same characteristics MPSTP2E. TECHNICAL SPECIFICATIONS 44 Power supply: Consumption: Dimensions and weight: 2 x 3 V, lithium,, batteries 80 mA 37 x 75 x 10 mm - 35 g RADIOCONTROLS EASYROLL transmitters ROLLING CODE 433.92 MHz ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS MR1EXP Single channel indoor Rolling Code receiver (may be set to receive Ch1,2,3 or 4),The receiver comprises the receiver and decoder for standard code, Rolling code and EASYROLL code X receiver for up to 200 standard or EASYROLL transmitters MRA2EXP External 433.92MHz 2-channel receiver with antenna and plug-in cable. Standard code, Rolling Code and EASYROLL control. X Memory for up to 200 different codes EASYROLL or standard Prastel transmitters MRBEXP Flexible and modular the MRBEXP base Rolling Code Receiver comprises a receiver and decoder for standard code. Rolling code and EASYROLL code. Capable of memorising up to 1000 different transmitters the unit may be used as a 1,2,3 or 4 channel receiver depending on the application. Using prastel’s range of plug in module the relays outputs may be timed SKT, monostable SK3 or bistable .SK3RB. MRBE200XP Like the MRBEXP the MRBE200XP is a base station capable of receiving channel 1 to 4. This unit is however supplied with a preset memory for 200 users. X Memorising of up to 200 different codes generated by EASYROLL family or standard transmitters. Using prastel’s range of plug in module the relays outputs may be timed SKT, monostable SK3 or bistable .SK3RB. TECHNICAL SPECIFICATIONS Power supply: Consumption ave working/rest: Types of relay output: Contact capacity: Operating temperature: Protection rating: Dimensions and weight: MR1EXP MRA2EXP MRBEXP - 200XP 12-24Vac/dc 40mA/22mA monostable, bistable 0,5 A @ 24 VAC/DC -20/+55 °C IP44 100 x 55 x 22 mm 12-24Vac/dc 40mA/22mA monostable, bistable 0,5 A @ 24 VAC/DC -20/+55 °C IP55 77 x 80 x 38 mm 12-24Vac/dc 40mA/22mA monostable, bistabie or timed 0,5 A @ 24 VAC/DC -20/+55 °C IP55 108 x 142 x 40 mm NB: Whilst EASYROLL recievers are compable with existing 433.92 MHz transmitters, EASYROLL functions will not apply. 45 RADIOCONTROLS EASYROLL Channel and memory modules, decoder Extractable resinate memory modules for MRBEXP with 200 and 1000 codes that give a complete control of user codes with password M200RXP M1000RXP TECHNICAL SPECIFICATIONS Dimensions and weight: 16x17x5 mm - 17 g (M200R) - 18x25x5 mm - 22 Channel modules for relay outputs on MRB, MRBE and MRBE200XP series receivers. SK3 (monostable) SK3RB (bistable) SK3T (time lag) TECHNICAL SPECIFICATIONS Dimensions and weight: 35x25x14 mm - 70 g SKT SK3RB SK3 DECM4M 4 channel Decoding board to increase the reception channels on all receivers MULTIPASS and EASYROLL series. TECHNICAL SPECIFICATIONS Power supply: 12 - 24 Vac/dc Avge Consumption avge work/rest:40 mA / 22 mA N° memorisable codes: From 50 to 1000 (with MM – LOGIC – M/R series memory modules) N. channels: 4 (with SK3 series additional modules) Types of output: monostable, bistable and time delay Output: relay Contact capacity: 0.5 A @ 24 VAC/DC Signals: red LED Operating temperature: -20/+55 °C Protection rating: IP55 Dimensions and weight: 100 x 55 x 22 mm - 70 g The memory modules and the extractable channel boards can be used with all types of PRASTEL modular receivers in the MULTIPASS EASYROLL or ROLLING CODE series. 46 RADIOCONTROLS EASYROLL software and control terminals ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS GTSYSTEMXP Portable control unit for managing memories MR (rolling), MRXP (Easy-roll), for management of transmitter codes of the EasyRoll line on receivers. This control unit operates with rechargeable batteries that allow the programming of data inserted in the memory to be checked and if necessary a security copy to be created. It can be used with Prastel receivers fitted with both integrated memory and extractable memory; for receivers with fixed memory, a connecting GTSYSTEMXP - receiver cable allows the data management. With the GTSYSTEMXP control unit the following operations can be performed: X Insert the transmitter codes via radio in a memory module X Scroll all the memorised transmitter codes on the memory module and cancel them individually X Eliminate all the memorised codes with a single operation X Insert a password in the MR and MRXP memories. X Copy the contents of the memory modules on files and vice versa X Programme the EasyRoll line transmitters remotely (proximity) X Programme the memories of the EasyRoll line X Interface with a PC using the WINGTSYSTEM dedicated software and thus manage the archives of the installations X Dialogue with a command control unit (e.g. UNIK). TECHNICAL SPECIFICATIONS Power supply: Consumption: Protection rating: Dimensions and weight: UNIK line Tx EASYROLL WINGTSYSTEM Radio receiver EASY200 12 Vdc 300 mA IP44 105 x 205 x 38 mm - 1490 g M1000E M2000PE WINGTSYSTEM Software for management of memory modules, receivers and software M2000PE. The WINGTSYTEM, through the GTSYSTEM, and PC serial line allows: X Carrying out maintenance of memory modules M200R, M1000R, M200RXP and M1000RXP. X Carrying out transfer of data from M2000PE or GTSYSTEMXP to PC and vice versa. X Carrying out recognition via radio/optics of the MPS, MPS EasyRoll series transmitters X Carry out via radio the programming of EasyRoll transmitters. X Manage a database of installations, to each of which can be given a list of codes and technical interventions carried out. TECHNICAL SPECIFICATIONS Dimensions and weight CD - 30 g 47 R ADIOCONTROLS 433,92 MHz standard transmitters MPSTL2E MPSTL4E Multipass® 433.92 MHz transmitter lateral buttons 2 and 4 channels. X UNIQUE EE-PROM SEQUENTIAL CODE X 4 billion preset codes TECHNICAL SPECIFICATIONS Power supply: Consumption: Dimensions and weight: MPSTF2E MPSTF4E alkaline battery 12V 12V 20 mA 75 x 38 x 15 mm - 48 g Multipass® transmitter 433.92 MHz, frontal buttons 2-4 channels. X DIP-SWITCH CODE X 1024 selectable codes X metallic clip TECHNICAL SPECIFICATIONS Power supply: Consumption: Dimensions and weight: RADIOKEYB alkaline battery 12V 12V 20 mA 35 x 80 x 12 mm - 45 g 4 channel 433.920 MHz numeric keypad with batter power supply for radio transmission of codes of a fixed length of 5 digits, even selectable from the keypad. RADIOKEYB is envisaged for all those cases where a device (automation, lights etc.) must be activated by more than one individual code. No wiring is necessary for the keypad installation and it can be used externally (it is protected from the rain). The front cover, in semi-transparent conductive rubber, is fixed with screws and illuminated with LEDs. X PIN CODE 5 BIT X Anti break-in electronic container: access to the electronics does allow the activation of the command TECHNICAL SPECIFICATIONS Power supply: Transmission duration: Range: Signals: Protection rating: Consumption: Dimensions and weight: WT2E battery 9V approx. 1 second 50 m illumination LED – Buzzer IP 54 – internal use 0/30 mA 73 x 80 x 33 mm – 160 g 2-channel transmitter 433.92 MHz, with battery power supply frontal buttons wall mounting, compatible with all the Prastel line of receivers. X Wall-mounted or 503 Ticino cases TECHNICAL SPECIFICATIONS Power supply Consumption Dimensions and weight 48 alkaline battery 12V 20 mA 85 x 95 x 15 mm - 59 g RADIOCONTROLS 433, ROLLING CODE standard receivers RX1E 1-CHANNEL Rolling Code 433.92 MHz Receiver, INTERNAL. ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS X Memorising of up to 50 different codes generated by MULTIPASS family transmitters, either standard or Rolling code. MR1E230Z 1-CHANNEL Rolling Code 433.92 MHz Receiver, 230 V, UNDECAL base included MRS2E 2-CHANNEL board Rolling Code 433.92 MHz Receiver, MOLEX connection for SER and EUROTRE control units. X Memorising of up to 200 different codes generated by MULTIPASS family transmitters, either standard or Rolling code. TECHNICAL SPECIFICATIONS RX1E MRS2E Power supply: Consumption avge working/rest: Types of relay output: Contact capacity: Operating temperature: Protection rating: Dimensions and weight: 12-24VAC/DC 40mA/22mA monostable, bistable 0.5 A @ 24 VAC/DC -20/+55 °C IP44 100 x 55 x 22 mm - 70 g 12-24VAC/DC 45mA/18mA Monostable, bistable and time delay 0.5 A @ 24 VAC/DC -20/+55 °C 100 x 63 x 17 mm - 50 g RKIT3 Kit consisting of 3 x 2-channel transmitters MPSTF2E and 1 receiver RX1E (1-channel) RKIT3R Kit consisting of 3 x 2-channel transmitters MT2E and 1 receiver RX1E (1-channel) 49 R ADIOCONTROLS 433,92 MHz Accessories (antennas) ANT433AV Tuned Antenna 433.92 MHz, in vandal-proof box complete with 2.5 m cable TECHNICAL SPECIFICATIONS Protection rating: IP65 Dimensions and weight: 50x95x25 mm - 150g ANT433S Ground plane Antenna 433.92 MHz, professional, complete with 2.5m. cable TECHNICAL SPECIFICATIONS Dimensions and weight: Stilo h.41 mm - 325 g ANT433SD The ANT433SD antenna with Halo technology is specially designed and built with the aim of obtaining the best performance/price ratio for a 433.92 MHz frequency. Thanks to its innovatory form and its adjustable horizontal orientation (+/- 90°); it is suitable for installations where the antenna needs to be directed in the direction of activation of the transmitters. Made from plastic-covered vetronite, it gives a long life and high resistance to the elements The antenna is fitted with a coaxial cable with 75 Ohm impedance and a length of 2.5 m TECHNICAL SPECIFICATIONS Dimensions and weight: 60 x 61 x 120 mm - 195 g ACANT Tuner for Two antennas on a single receiver (2 inputs / 1 output). TECHNICAL SPECIFICATIONS Dimensions and weight: 52 x 65 x 19 mm - 105 g 50 R ADIOCONTROLS 40,685 MHz transmitters and receivers ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS * MPSTL2 * MPSTL4 Multipass 40.685 MHz transmitter, UNIQUE CODE EE-PROM, 4 billion preset codes, lateral buttons, 2 and 4 channels. X ABS box TECHNICAL SPECIFICATIONS Power supply: Absorption: Dimensions and weight: MRA2 alkaline battery 12V 20 mA 75 x 38 x 15 mm - 48 g Receiver 2-CHANNEL MULTIPASS 40.685 MHz, COMPLETE WITH ANTENNA AND PLUG IN CABLE. X memorising of up to 200 different codes generated by MULTIPASS® family transmitters. X pre-assembled X ABS box for external use MRB Modular base Receiver MRB integrates the functions of receiver and standard code decoder. Capable of memorising of up to 1000 different codes generated by MULTIPASS® family transmitters. X Memorising of up to 1000 different codes generated by MULTIPASS® family transmitters. X 1 to 4 channels outputs with SK3 boards X ABS box for external use TECHNICAL SPECIFICATIONS Power supply: Consumption avge working/rest: Types of relay output: Contact capacity: Operating temperature: Protection rating: Dimensions and weight: * MRA2 12-24VAC/DC 45mA/22mA monostable, bistable 0.5 A @ 24 VAC/DC -20/+55 °C IP44 77 x 80 x 38 mm - 250 g MRB 12-24VAC/DC 40mA/22mA Monostable, bistable and time delay 0.5 A @ 24 VAC/DC -20/+55 °C IP55 108 x 142 x 40 mm - 225 g Radio controls also available with frequency of 26.995 MHz, (codeMPSTL2F and MPSTL4F) 51 R ADIOCONTROLS 40,685 MHz accessories(channel modules, memory, antennas) Extractable Memory modules for MRB-MRBE, 200 and 1000 codes that allow a complete control, with password of user codes, M200R M1000R TECHNICAL SPECIFICATIONS Dimensions and weight: 16x17x5 mm - 17g (M200R) 18x25x5 mm - 22g (M1000R) SK3 (single-pulse) SK3RB (flip-flop) SK3T (timed) Channel modules for relay outputs on MRB, MRBEXP series receivers. DECM4M Decodes 4 channel connectors to increase the channels on all the MULTIPASS and EASYROLL series receivers (For further details see pag.30) ANT40,6 (40.685 MHz ) TECHNICAL SPECIFICATIONS Contact capacity: Dimensions and weight: 1 A @ 24 Vdc 35x25x14 mm - 10 g Antenna 40.685 MHz, professional, complete with 2.5m cable TECHNICAL SPECIFICATIONS Dimensions and weight: ANTFK4 (40,685 MHz ) Stilo h. 542 mm - 312 g Tuned Antenna 40,685 MHz, complete with 2.5m cable TECHNICAL SPECIFICATIONS Dimensions and weight: ACANT Stilo h.530 mm - 242 g Tuner two antenna on a single receiver, complete with 0.7m cable TECHNICAL SPECIFICATIONS Dimensions and weight: 52 52 x 65 x 19 mm - 105 g R ADIOCONTROLS 26,9-29,7-30,8-306 MHz transmitters and receivers EXTRA CEE ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS KMFT2P (26,995 MHz double-channel) Dip-switch transmitter; 2 and 4 channels, 1024 selectable codes lateral buttons KMFT2P93 (30,875 MHz double-channel) X X X metal clip ABS box led X X X metal clip ABS box led KMFT4P (26,995 MHz quad-channel) KM KMFT4P93 (30,875 MHz quad-channel) NCSMT2P NCSMT4P (306 MHz quad-channel) TECHNICAL SPECIFICATIONS KM KMRB1 (26,995MHz) KMRB193 (30,875MHz) NCSMRB1 (306 MHz ) Power supply: Absorption: Dimensions and weight: alkaline battery 12V 20 mA 35 x 80 x 12 mm - 45 g Modular base Receiver from 1 to 4 channels. X Memorising of up to 1024 different codes generated by KM and NCSM family transmitters. X ABS box for external use TECHNICAL SPECIFICATIONS KMF Power supply: Consumption avge: Types of relay output: Contact capacity: Operating temperature: Dimensions and weight: NCSM 12-24VAC/DC 12-24VAC/DC 1 VA 1 VA Monostable, bistable time delay 1 A @ 24 VAC/DC 1 A @ 24 VAC/DC -20°/+55° C -20°/+55° C 108 x 142 x 40 mm - 225 g 108 x 142 x 40 mm -225 g Radiocontrols with code frequency of 29.7 MHz are also available KMT2P and KMT4P and receiver KMRB1 53 R ADIOCONTROLS 26,9-29,7-30,8-306 MHz accessories (channel modules, antennas) SK1 (monostable) SKRB (bistable) SKT (time lag) DECM4 Channel modules for relay outputs on KM andNCSM series receivers. TECHNICAL SPECIFICATIONS Contact capacity: 1 A @ 24 VDC Dimensions and weight: 35 x 25 x 14 mm - 20 g 4 channel Decoding board to increase the reception channels on all receivers KM and NCSM series. TECHNICAL SPECIFICATIONS Power supply: Avge Consumption avge work/rest: N. channels: Types of output: Output: Contact capacity: Signals: Operating temperature: Dimensions and weight: ANTFK2 ANTFK3 ANTFS1 54 (26,995 MHz) 12 - 24 VAC/DC 22 mA / 40 mA 4 monostable, bistable and time delay relay 0.5 A @ 24 VAC/DC red LED -10°/+55° C 100 x 55 x 22 mm - 70 g Tuned Antenna complete with 2.5 m cable (30,875 MHz) (306 MHz) TECHNICAL SPECIFICATIONS Dimensions and weight: whip h.530 mm - 242 g R ADIO JUMPERS 43 MHz point autotested ELECTRONIC DEVICES FOR DOOR AND GATES AUTOMATIC SYSTEMS LINK43 allows remote transmissions of ON/OFF commands and signals from fixed locations Suitable for: • remote signalling of an alarm condition on security systems • remote activation of devices not reachable via cable • All these installation situations where a reliable and efficient radio technology with autotest is needed This product can be used in Italy without PT licence as long as the installation is reported as explained in the instructions manual. LINK43T4 4-channel transmitter, 4W, 1024 combinations X X X X X LONG RANGE: 10 KM MAX 24 work frequencies selectable with dip switches Power limiter autotest and supervision PLL technology TECHNICAL SPECIFICATIONS Power supply: Consumption: Code: Code combinations: Channels: Working frequency: Channelling Power: Range: 12 VDC 950 mA transmitting (4 W), 40 mA in stand-by digital programmable 24 bit 1024 4, also contemporary from 43.300 to 43.5875 MHz 12.5 kHz (24 channels selectable) 4W 1000 ÷ 10000 m in depending on the type of installation and types of antenna used Timer: incorporated autotest circuit that cyclically sends a radio transmission of 2 seconds every 60 seconds (excludable with P1) Protection rating: IP54 Dimensions and weight: 215 x 300 x 85 mm - 2770 g LINK43RB Autotested modular Receiver 4 connections for channel module (SK channel modules – see page 56). TECHNICAL SPECIFICATIONS Power supply: Consumption: Code: Code combinations: Channels: Outputs: Contact capacity: Working frequency: Low frequency: Protection rating: Dimensions and weight: 12 VDC 120 mA receiving + 20 mA for each activated relay 50 mA in stand-by digitally programmable 24 bit 1024 4, also contemporary relay contact N.O. + Low frequency 1 A max a 24 V from 43.300 to 43.5875 MHz a low frequency output is inserted for connection of eventual decoding boards IP54 215 x 300 x 85 mm - 2770 g 55 R ADIO JUMPER accessories SK1 (monostable) SKRB (bistable) SKT (timed) ANT43 43 MHz (channel modules, antennas) Channel modules for relay outputs on LINK43RB series receivers TECHNICAL SPECIFICATIONS Contact capacity: 1 A @ 24 Vdc Dimensions and weight: 35 x 25 x 14 mm - 10 g 43 MHz Tuned whip antenna for LINK43, complete with 2.5m cable TECHNICAL SPECIFICATIONS Dimensions and weight: whip h. 1700 mm - 1550 g ANT43S Professional Antenna ground plane 43 MHz, for LINK43, complete with 2.5m cable TECHNICAL SPECIFICATIONS Dimensions and weight: whip h. 1700 mm - 1550 g ANT43S DECM4 Decoding board 4 channels to increase the channels of the LINK43RB receiver Configuration table antenna/range 56 Transmitter with: Range Receiver with: ANT43 1000-3000 m ANT43 ANT43 1000-4000 m ANT43S ANT43S 3000-6000 m ANT43 ANT43S 4000-10000 m ANT43S