Transcript
Fast Ethernet
Access
ATARA100M
Any To Any Redundancy SNMP Managed Access Device The ATARA100M is a SNMP managed Any To Any 100Base-TX to 100Base-FX Redundant Link Access Device that includes an SNMP management module. It is designed to suit the needs of connecting critical/large users to the network, ensuring failproof operation by protecting both the fiber path and the user interface. The ATARA100M automatically selects the active port on each F/O and TP sides (with priority to MAIN ports) and interconnects them. It has two TP and two F/O connectors. This way end-to-end path and device redundancy is achieved disregarding the type of the remote device, catering to various network resilience scenarios. Upon failure of the Main port, the device switches traffic within less than 10 sec. to the Backup port and alerts the network manager. When the Main link is restored, the traffic automatically or manually switches back to it, providing operational consistency and easy tracing of the active path. The switchback occurs immediately after link restoration or following a tunable delay (via the management system) to avoid network instability during the repair process. Inactive Ports (normally
Backup) are continuously monitored for link integrity, providing the network manager with valuable information of his systems readiness. Using front panel switch or via management, the device may be switched from Redundant link mode to Dual channel mode of operation. In such case, the device functions exactly like a dual channel converter, with each 2 adjacent ports forming a channel. As a layer one converter, it is independent from frame size. The device is offered in a large variety of optical interfaces, both dual and single fiber strand, allowing the extension of the network up to 150km. Selective Fault Propagation from the F/O port to the TP or vice-versa allows further network resilience (provided that the switch/router to which it is connected is properly set to activate an alternate path). The RJ-45 ports are Auto-Cross compliant, providing an easy-to-use of crossover or straightthrough cables. The ATARA100M can be managed via a serial connection (RS232), using a Telnet terminal and through a standard SNMP management station. Diagnostic LEDs provide a visual indication of the device status and operation.
Key Features Any-To-Any Redundant Links - fits any network scenario Tunable delayed switch-back - enhanced network stability Transparent 100Base-TX to 100Base-FX with FDX Advertising - interoperability Dual Channel operation - optimized logistics Selective Fault Propagation - total network resilience
Auto-Cross TP ports - for ease of installation Supports Far End Fault (FEF) for F/O Link integrity Flow Control (Pause enable/disable) Bandwidth (Upstream and Downstream) Remote software upgrade
Management Functions Device status (shows the ports status and their current logical role, redundant or dual channel mode, the firmware revision and current internal temperature) Display Device Configuration (detailed status redundant link /dual channel mode) Device Configuration Menu (Redundancy menu, channel description, set bandwidth, enable/disable TP ports, enable/disable Pause mode (Flow Control), set Fault Propagation mode (FO>TP, TP>FO), Reset device, Restore device defaults current or global mode) System Configuration Menu (View main system parameters, Network parameters, SNMP parameters, Telnet parameters, Restore system parameters defaults) Software version control Menu (view software upgrade parameters, change TFTP server address, select upgrade software version, select remote path, start software upgrade)
DS3910R0507
Access
ATARA100M
General Specifications Standard Compliance:
Conversion Method:
100Base-TX ports (x2):
100Base-FX ports (x2):
Main to Backup Switchover:
Backup to Main Switchover:
Management:
Frontal panel Management:
IEEE802.3u, 100Base-TX, 100Base-FX Shielded RJ-45, Auto-cross, auto-polarity 100m over STP cat.5 or higher cable Preset to 100Base-TX and FDX 10 sec. Max.
SNMP, Telnet , CLI (RS232)
Diagnostic LEDs:
Main: F/O - Link/activity, In-Use, MA Backup: F/O - Link/activity, In-Use, MA (MA Active LED not in use) Main: TP - Link/activity, In-Use Backup: TP - Link/activity, In-Use Power LED
Layer 1, between any F/O to Any TP port Dual Duplex SC connectors (ST optional) Far End Fault Signaling Flow Control tunable to 0/5/10/20 sec. or manually controlled Ports: 2x RJ45 10Base-T, RS232(mini-Din) LEDs: RDY, RCV, Link
Controls (DIP switches)
Redundant Links/Dual Channel mode FO>>TP fault propagation ON/OFF TP>>FO fault propagation ON/OFF
Environmental/Physical Power-Supply:
Power Consumption:
Operating Temperature: O O O O
Storage Temperature
Internal, 100÷240VAC, 50÷60Hz -36 ÷ -72VDC optional
0 ÷45 C, ETR = -10 ÷+70 C optional
Humidity:
10% ÷ 90% non-condensing
Safety
Designed to meet EN 60950
EMC - designed to meet:
FCC part 15, subpart B, Class A EMC Directive 89/336/EEC
5W Max. O
O
-20 ÷ +80 C
Weight
650gr
Dimensions
223x44x150mm (WxHxD)
Installation methods
Desk-top, wall-mount, half-rack, 19 shelf
Ordering Information Part #
Model
Description
3908
ATARA100M
100Base-TX to 100Base-FX Redundant Link Access Device, MM 2km 1310nm, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 7km 1310nm, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 15km 1310nm, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 25km 1310nm, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 40km 1310nm, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 70km 1310nm, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 100km 1550nm, DFB, 2 *duplex SC, SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device, SM 15km 1310nm Transmit/ 1550nm Receive, 2 *simplex SC, SNMP managed -36 ÷ -72VDC power supply (instead of the 100÷240VAC, 50÷60Hz PS) Extended Temperature Range option (-10 to +70 Centigrade) DC Power Supply cable for PS48, 2m 19 Rack shelf for installation of up to two ATARA100 devices Set (pair) of rack-mounting brackets
3909
ATARA100M/SMR7
3910
ATARA100M/SMR
3911
ATARA100M/SM
3912
ATARA100M/SM/L
3913
ATARA100M/SM/L2
3914
ATARA100M/SM/L3
3915 ATARA100M/SMRF13 B097 B098 B151 B160 B218
PS48 ETR CBPS-DC48V RM2 MBR
FibroLAN Ltd.
P.O.Box 544 Yoqneam-Illit, 20692 ISRAEL Tel: +972-4-9591717,Fax: +972-49591718
[email protected] www.fibrolan.com
FibroLAN Inc.
350 W Passaic St. Rochelle Park, NJ 07662 Toll free: (800) 406 6088 Tel: (201) 843 1626 Fax: (201) 843 1628
[email protected]
Studio Michal
Specifications are subject to change w/without prior notice
