Access - Fibrolan

Transcript

F a s t E t h e r n e t Access SCON1M Managed Single Channel 10/100BaseTXFX Media Converter While Media Converters are considered part of the cable plant, in many cases they must be remotely managed as any other network device. In particular this is true in mission-critical, fully managed networks as well as in networks dispersed over large areas to allow efficient control and maintenance. The S.CON1M is the only compact SNMP managed Media Converter available in the market. While vendors offer such feature for modular systems only, the need for management is more intense in single channel devices, being deployed away from the main wiring closets. This compact size device implements the innovative BMD (Buffered Media Domain) technology to provide an unconditioned network extension of up to 150km, in any network architecture (even when such includes repeaters). Its copper port is auto-negotiating to provide easy migration from 10Mbps to 100Mbps transmission rates. A switch selectable VLAN allows choice of in-band (over the fiber) management or locally accessible (via the TP port) management. Special attention was given to allow easy installation and maintenance: MDIII/MDI-X switch to eliminate crossed cables, internal quality power-supply, extensive frontpanel diagnostics and more. A powerful selective fault propagation mechanism facilitates the initiation of a redundant path to critical sites. In case that more than one device must be installed in a wiring center, a special 19” shelf is available for easy and safe installation while occupying minimal rack-space. All these features make the S.CON1M the most powerful device of its kind. Key Features • SNMP in-band and out-of-band fully managed device • Network resilience: Selective Fault Propagation • Top Performance: maximal distances in any network architecture • Protection of Investment: 10Base-T support for easy migration • FEF: True Network Integrity Indication DSB077-REV0103 • Flexible installation: desk-top, wall or shelfmounted • Easy Network Design: no PDV calculations needed • Reliability: internal quality power-supply • Maintainability: extensive (9 LEDs/11 functions) front-panel diagnostics Access SCON1M General Specifications Standard Compliance IEEE 802.3u, 100Base-TX,10Base-T, FDSE 100Base-FX 10/100Base-TX port Shielded RJ-45 Half/Full Duplex support via auto-sensing or manual (DIP switch) 100m over UTP/STP Cat.5 cable Auto-Polarity correction, MDI-II/MDI-X selection, 10Base-T support via auto-sensing or manual (DIP switch) Diagnostics Full Duplex, Link/Activity, SD -F/O port Full Duplex, Link/Activity, 100Mbps - TP port Power Management Functions All Diagnostic functions (see above) All Control functions (see above) Device temperature Alerts of device's any operational changes System status Conversion Method BMD (Buffered Media Domain); Selective Fault Propagation 100Base-FX port 1310nm, multi-mode, SC connectors Distance - 2000m (6600ft) Half or Full Duplex (DIP switch selectable) Output Power: -18dbm or better Input Sensitivity: -32dbm or better For Single- Mode specifications see DS-SM Controls (DIP Switches) TX: 10/100, FDX/HDX Auto-Negotiation enable/disable VLAN enable/disable Fault Propagation F>T, T>F Management Physical Interface miniDIN connector (RS232) for setup and diagnostics 2 status LEDs (Activity, Readiness) Management Standards SNMP (V1 & V2) MIB II (RFC 1213) FibroLAN private MIB extensions Telnet, TFTP Environmental and Physical Power-Supply Internal, 100 240 VAC, 50 60Hz, IEC Connector -48VDC (-36 -72VDC) power supply - optional Power Consumption 10 Watts maximum Temperature Operating: 0˚ †+45˚C Storage: -20˚ †+80˚C Safety UL 1950:1995, EN 60950 Dimensions 120x170x40mm Humidity: 10% †90% non-condensing EMC FCC part 15, Subpart B, Class B ICES 003:1997, Class B; EMC Directive 89/336/EEC Weight 500 gram max. Installation Desk-Top or (optional) Shelf or (optional) Wall-Mount Ordering Information Part # B077 B035 B036 B037 B078 B038 B039 B148 B048 B026 B053 B054 B098 B097 Model S.CON1M S.CON1M/T S.CON1M/SMR7 S.CON1M/SMR S.CON1M/SM S.CON1M/SM/L S.CON1M/SM/L2 S.CON1M/SM/L3 S.CON1M/SM/LX S.CON1M/SM/F1 S.CON1M/SMRF13 S.CON1M/SMRF15 ETR PS48 Description Managed 10/100TX-FX converter, SC, multi-mode 1310nm, 2km, internal PS Managed 10/100TX-FX converter, ST, multi-mode 1310nm, 2km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1310nm, 7km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1310nm, 15km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1310nm, 25km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1310nm, 40km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1310nm, 70km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1550nm, 100km, internal PS Managed 10/100TX-FX converter, SC, single-mode 1550nm, 150km, internal PS Managed 10/100TX-FX converter, SC, single-mode/single strand 1310/1310nm, 20km, internal PS Managed 10/100TX-FX converter, SC, single-mode/single strand 1310/1550nm, 15km, internal PS Managed 10/100TX-FX converter, SC, single-mode/single strand 1550/1310nm, 15km, internal PS Extended Temperature Range (-10˚ +70˚C) option DC (-36 -72VDC) power supply instead of AC PS (option) Specifications subject to change without prior notice International: Fibrolan Ltd., Yoqneam Star Building P. O . B o x 5 4 4 , Yo q n e a m I l l i t 2 0 6 9 2 , I s r a e l Tel.: Int.+972-4-959-1717, Fax.: Int.+972-4-959-1718 www.fibrolan.com e-mail: [email protected]