Transcript
AccessLinX Voice over IP and Data Gateway TX/3 + SFP
AccessLinX delivers “triple-play” services to residential and business customers. The AccessLinX series of Voice over IP (VoIP) and Fiber-to-the-Home (FTTH) media gateways provides converged broadband services including voice, video and data over a single IP infrastructure. The AccessLinX TX/3 includes two analog voice lines and three 10/100 Mbps Ethernet ports, including a 100 Mbps Ethernet optical uplink. Thus, the AccessLinX series of VoIP and FTTH gateways cover the entire spectrum of requirements for both the enterprise VoIP environment and remote office connectivity. Furthermore, the AccessLinX TX/3 provides Enhanced Layer 2 IP switching with VLAN tagging, TOS marking (L3), security and Quality of Service (QoS) features support. AccessLinX also includes a Life Line connection which automatically switches over to a phone port in the event that the data uplink or the unit power is lost, thus guaranteeing phone usage. Fiber-to-the-Home/Multiple Dwelling Unit (FTTH/MDU). The flexible architecture of the AccessLinX TX/3 makes it a VoIP gateway platform that supports a variety of transmission technologies, such as 100 Mbps copper, single-mode or multi-mode fiber, and even bi-directional single-strand and CWDM fiber optics. Fiber support, with 100 Mbps bandwidth, enables the end-user to enjoy any bandwidth-hungry broadband application, such as Video-On-Demand, and enables the service provider to offer this service over a wide distribution area, while maintaining high quality of service.
Back side (ports)
Front side (LEDs)
• Integrated Voice (VoIP), Video and Data IP media gateway • 2 Voice (FXS) ports • 3 Data 10/100BaseTX ports • 1 Uplink/ WAN port – 10/100BaseTX or 100BaseFX • 1 PSTN Life Line port – guarantees phone is always-on
Voice (VoIP), video and data convergence. The AccessLinX series is the ideal CPE solution for service providers looking to deliver voice, video and data over copper or fiber to the end user. As these services are delivered over the same network infrastructure, it is imperative that CPE devices support higher-level Ethernet standards to ensure successful delivery of services. The AccessLinX TX/3 supports 802.1p QoS (voice over data & video priority), 802.1q VLAN tagging, Spanning Tree Protocol and IGMPv2 (for video streaming applications). The AccessLinX TX/3 supports all present VoIP protocols including SIP, MGCP and H.323. Easily enable other basic protocols, too. Adherence to such standards provides users with maximum interoperability with their existing network infrastructure.
• Enhanced Video capabilities
Small and medium enterprises usage. The AccessLinX TX/3 is the ideal solution for small and medium enterprises, providing reliability, functionality and economy. Users can easily set up IP-based phone calls while simultaneously using AccessLinX TX/3 as a high-bandwidth enterprise network connection.
• Voice activity detection & prioritization
Manageability. Easily manage the AccessLinX TX/3 by CLI, SNMP, HTTP, Telnet, local terminal and download of configuration and new software via DHCP server. In addition, the AccessLinX TX/3 supports iView². iView² allows for remote link enable/disable, software and device firmware updates as well as receiving all essential device traffic statistics via SNMP. iView² runs standalone on Windows NT/XP/2000/2003, as a standalone Java Application for other operating systems,as a snap-in module for HP OpenView, as a Web Server running under IIS or as a Java Web Servlet.
• T.38 Facsimile over IP support
• Full support for ITU SIP, MGCP and H.323 • Enhanced L2 switching capabilities Wire speed performance • Integrated Web server • Automatic tone generation: Dial, Busy, Ring-Back • DTMF detection and generation
• IGMP Snooping • Automatic configuration (BOOTP)
For assistance in selecting the right version of iView² for your operating system, please visit http://www.imcnetworks.com/products/iview2.asp.
www.imcnetworks.com
800-624-1070
www.mediaconverter.com
Application Example Using AccessLinX TX/3, service providers can supply both data and voice services, over one Ethernet connection, to small and midsize business customers.
Technical Specifications Compatibility: VoIP: ITU H.323, MGCP, SIP Voice CODECs: ITU G.711, ITU G.723.1, ITU G.726, ITU G.729A/B Voice: ITU FXS, ITU T.38 (H.323, SIP), VAD, CNG, Caller ID, 5 REN, RTP, automatic fax/modem detection Switching: IEEE 802.3, IEEE 802.3u, IEEE 802.1p, IEEE 802.1q, RFC 2068 HTTP, IGMP snooping with fast leave, TOS marking LAN Interface: 10/100BaseTX Connector: RJ-45 Transmission: full/half-duplex Uplink/WANFiber/Copper Uplink/WAN: TX or SFP (see below)
Switching Characteristics: Technology: ASIC-based parallel store and forward Address Table: 1K MAC addresses Forwarding rate: 14,880pps for 10 Mbps; 148,800pps for 100 Mbps Telephony Interface: Analog; Connector: RJ-11 (POTS) Indicators: Management Green flashing (CPU traffic) Voice Green (Gatekeeper/Controller connection) Ready Green flashing Power Green Management: Internet Web-based management SNMP Client MIBs MIB II, Private MIB Interfaces: CLI, Telnet, SNMP, Web; remote auto-configuration via TFTP and SW Download via TFTP
Security: Passwords, encrypted configuration file, NMS community password General: Dimensions: H 1.77” x L 7.36” x W 4.72” H 4.50 x L 18.69 x W 11.99 cm Power: 4.5 VDC external power supply Weight: 1.32 lb, 0.6 kg Operating Temperature: 0º - 45º C (32º - 113º F) Operating Humidity: 10% - 90% non-condensing Regulatory Approvals: · FCC Class A · UL/cUL, CSA, CE
Fiber Optics Specifications For each product listed below in the Ordering Information section, the number in the [XX] denotes an approximate fiber distance based on industry-standard fiber specifications and worst-case (connector loss, aged fiber, splices, etc.) installations. You can typically achieve substantially longer distances. Actual distances may vary for each installation. For complete power budgets and information on calculating specific distances, please visit web site our at www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000. Twisted pair distance is 100 meters.
Ordering Information The following AccessLinX products include: 2 voice ports (FXS), 3 LAN 10/100BaseTX ports and 1 Uplink/WAN that is either TX or uses an SFP module; onboard PSTN and CLI ports. 52-10420 AccessLinX, TX/3 + TX (with SIP) [100 m] 52-10421 AccessLinX, TX/3 + TX (with H323) [100 m] 52-10422 AccessLinX, TX/3 + TX (with MGCP) [100 m] 52-10430 52-10431 52-10432
SFP (Small Form Pluggable) Modules 08-39101 SFP/155, MM850-LC [2 Km] 08-39102 SFP/155-ED, SM1310-LC [20 Km] 08-39103 SFP/155-ED, SM1310/PLUS-LC [40 Km] 08-39104 SFP/155-ED, SM1550/LONG-LC [80 Km]
AccessLinX, TX/3 + SFP (with SIP) AccessLinX, TX/3 + SFP (with H323) AccessLinX, TX/3 + SFP (with MGCP
NOTE: The SFP version doesn't have a local CLI interface. NOTE: If you require single-strand fiber or CWDM, please contact IMC Networks.
IMC Networks
IMC Networks
IMC Networks
IMC Networks
19772 Pauling Foothill Ranch, CA 92610 TEL: 949-465-3000 FAX: 949-465-3020
[email protected] www.imcnetworks.com
(Europe) Herseltsesteenweg 268 B-3200 Aarschot Belgium TEL: +32-16-550880 FAX: +32-16-550888
[email protected]
(Eastern US/Latin America) 18840 US Hwy. 19 North Suite 400 Clearwater, FL 33764 TEL: 727-524-8152/524-8071 (Latin) FAX: 727-524-8432
[email protected]
Fiber Consulting Services For information call: TEL: 949-465-3000 1-800-624-1070 (US/CAN) +32-16-550880 (Europe)
[email protected]
Copyright © 2005 IMC Networks. All rights reserved. The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any errors that may appear in this document. Specific product names may be trademarks or registered trademarks and are the property of their respective companies.
Document #52-90430
June 2005
