Preview only show first 10 pages with watermark. For full document please download

Accuraid Ar212f8/f8r 2u 12-bay 8g Fibre Raid Subsystem

   EMBED


Share

Transcript

AccuRAID AR212F8/F8R 2U 12-Bay 8G Fibre RAID Subsystem Four 8G FC Ports per controller The AR212F8/F8R are Sans Digital’s innovative 8G Fibre RAID subsystem utilizing 4/8 x 8G Fibre channels for host connectivity on single/dual controller in a 2U 12-bay enterprise storage supporting 6Gb/s SAS or SATA III drives. With its expandable capability it is able to support up to 122 SAS/SATA devices via Sans Digital AccuSTOR 6G SAS JBOD (7 units of 3U 16-bay or 5 units of 4U 24-bay), AccuRAID series are scalable to provide over 384TB of storage capacity without sacrificing performance. New AccuRAID RAID subsystem Series are Sans Digital’s revolutionary product with breakthrough performance over previous AccuRAID RAID products. Driven by new generation storage processor, New AccuRAID Fibre Series are capable of delivering more than 1,900 MB/s data throughput by a single RAID controller that is two to three times better than any other RAID manufacturers can achieve. Highlights         800Mhz RAID-On-Chip Storage Processor. 80+ green Redundant 500W power supplies with PFC, AC Voltage 110-230 VAC /AC Frequency 50-60Hz Up to 4GB DDR2 ECC registered on one DIMM socket. Hardware RAID 6 engine to support extreme performance RAID 6 function. Support Global Hot Spare and local Hot Spare disk. Optional Battery Backup module preserves cache contents during power failure. NVRAM and Real Time Clock support, for configuration and transaction log. 2 x down-stream min-SAS supported, It can connect more SAS JBODs for capacity expansion. Technical Specifications RAID operation RAID Levels: 0, 1, 1E, 3, 5, 6, 50, 60 & JBOD ; Multiple RAID selection Online RAID level/stripe size migration Online Array roaming, online capacity expansion and RAID level migration simultaneously Support Global Hot Spare and dedicated Hot Spare disk Instant availability and background initialization Uniquely features "Drive Spin Down"- Saving more power consumption Automatically starts bad Blocks-Scrubbing by "Scheduled Volume Checking" Max 122 Physical drivers Online Volume set growth Max 128 LUNs ( Volume set ) per controller Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives Automatic drive insertion / removal detection and rebuilding Host Interface 4 x 8Gb Fibre Channels per controller (8 x 8G FC for dual controller) Drive Interface 12 of 6Gb SAS/SATAIII Drives Environmental / physical Cooling Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow design Controlled by RAID controller automatically maintaining optimal ambient temperature Size Dimensions: 28"x27"x15" Weight Weight (w/o HDDs): 55 lbs | phone 866 2 2581 1182 | fax 866 2 2581 0152 www.sansdigital.com | [email protected] | phone 866 4 2319 9311 | fax 866 4 2310 5901 AccuRAID AR316F8/F8R 3U 16-Bay 8G Fibre RAID Subsystem Four 8G FC Ports Single/Redundant controller The AR316F8/F8R are Sans Digital’s innovative 8G Fibre RAID subsystem utilizing 4/8 x 8G Fibre channels for host connectivity on Single/Dual controller in a 3U 16-bay enterprise storage supporting 6Gb/s SAS or SATA III drives. With its expandable capability it is able to support up to 122 SAS/SATA devices via Sans Digital AccuSTOR 6G SAS JBOD (7 units of 3U 16-bay or 5 units of 4U 24-bay), AccuRAID series are scalable to provide over 384TB of storage capacity without sacrificing performance. New AccuRAID RAID subsystem Series are Sans Digital’s revolutionary product with breakthrough performance over previous AccuRAID RAID products. Driven by new generation storage processor, New AccuRAID Fibre Series are capable of delivering more than 1,900 MB/s data throughput by a single RAID controller that is two to three times better than any other RAID manufacturers can achieve. Highlights         800Mhz RAID-On-Chip Storage Processor. 80+ green Redundant 500W power supplies with PFC, AC Voltage 110-230 VAC /AC Frequency 50-60Hz Up to 4GB DDR2 ECC registered on one DIMM socket. Hardware RAID 6 engine to support extreme performance RAID 6 function. Support Global Hot Spare and local Hot Spare disk. Optional Battery Backup module preserves cache contents during power failure. NVRAM and Real Time Clock support, for configuration and transaction log. 2 x down-stream min-SAS supported, It can connect more SAS JBODs for capacity expansion. Technical Specifications RAID operation RAID Levels: 0, 1, 1E, 3, 5, 6, 50, 60 & JBOD ; Multiple RAID selection Online RAID level/stripe size migration Online Array roaming, online capacity expansion and RAID level migration simultaneously Support Global Hot Spare and dedicated Hot Spare disk Instant availability and background initialization Uniquely features "Drive Spin Down"- Saving more power consumption Automatically starts bad Blocks-Scrubbing by "Scheduled Volume Checking" Max 122 Physical drivers Online Volume set growth Max 128 LUNs ( Volume set ) per controller Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives Automatic drive insertion / removal detection and rebuilding Host Interface 4 x 8Gb Fibre Channels per controller (8 x 8G FC for dual controller) Drive Interface 16 of 6Gb SAS/SATAIII Drives Environmental / physical Cooling 2 Hot-Swappable Modules & Blowers Size Dimensions(in): 19"W x 21"D x 5.5"H Weight Weight (w/o HDDs): 47 lbs | phone 866 2 2581 1182 | fax 866 2 2581 0152 www.sansdigital.com | [email protected] | phone 866 4 2319 9311 | fax 866 4 2310 5901 AccuRAID 4U Dual Controller Four 8G Fibre channels per controller The AR424F8R-P are Sans Digital’s innovative RAID subsystem utilizing four Fibre channels for host connectivity on each controller in a 4U 24-bay chassis supporting 6Gb/s SAS or SATA III drives. With 6G SAS JBOD AccuStor ( SAS 2.0 Expander ) supporting up to 122 SAS/SATA devices connected (7 units of 3U 16-bay or 5 units of 4U 24-bay), AccuRAID series are scalable to provide over 384TB of storage capacity without sacrificing performance. New AccuRAID RAID subsystem Series are Sans Digital’s revolutionary product with breakthrough performance over previous AccuRAID RAID products. Driven by new generation storage processor, New AccuRAID Fibre Series are capable of delivering more than 1,900 MB/s data throughput by a single RAID controller that is two to three times better than any other RAID manufacturers can achieve. Highlights          800Mhz RAID-On-Chip Storage Processor. 80+ green Redundant 500W power supplies with PFC, AC Voltage 110-230 VAC /AC Frequency 50-60Hz Up to 4GB DDR2 ECC registered on one DIMM socket. Hardware RAID 6 engine to support extreme performance RAID 6 function. Support Global Hot Spare and local Hot Spare disk. Optional Battery Backup module preserves cache contents during power failure. NVRAM and Real Time Clock support, for configuration and transaction log. 2 x down-stream min-SAS supported, It can connect more SAS JBODs for capacity expansion. Performance comparison  New Generation 8Gb Fibre channels  6Gb/S, Full duplex data transfer rate  Support Dual-Redundant controller mode  Wide port, aggregated bandwidth by 4x Links Technical Specifications RAID operation RAID Levels: 0, 1, 1E, 3, 5, 6, 50, 60 & JBOD ; Multiple RAID selection Online RAID level/stripe size migration Online Array roaming, online capacity expansion and RAID level migration simultaneously Support Global Hot Spare and dedicated Hot Spare disk Instant availability and background initialization Uniquely features "Drive Spin Down"- Saving more power consumption Automatically starts bad Blocks-Scrubbing by "Scheduled Volume Checking" Max 122 Physical drivers Online Volume set growth Max 128 LUNs ( Volume set ) per controller Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives Automatic drive insertion / removal detection and rebuilding Host Interface Four 8Gb Fibre Channels per controller ; Eight 8G Fibre channels for dual controller Drive Interface 24 of 6Gb SAS/SATA Disks - Support latest 3TB HDD ; 2 x miniSAS ( 4 x 6Gb Links) for expansion Environmental / physical Cooling Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow design Controlled by RAID controller automatically maintaining optimal ambient temperature Size and weight Dimensions: 446.5mm(W) x 517mm(D) x 4U ; Weight (w/o HDDs): 82 lbs www.sansdigital.com | [email protected] | phone 866 4 2319 9311 | fax 866 4 2310 5901 | phone 866 2 2581 1182 | fax 866 2 2581 0152