Transcript
accurate controlled tightening with preset fixed torque 515.1200 1/2" Mini impact wrench Easy-to-handle, compact 1/2" impact screwdriver with enormous power - A lightweight at 1.2 kg / small size L=153 mm - One-hand switching above the trigger - High-quality, impact-resistant composite housing - Cold-absorbent - Extremely quiet due to the integrated exhaust hose - With starting torque limitation - also perfect for tyre servicing - Supplied with 7.2mm connection plug - perfect preliminary set up for final tightening with an torque wrench
→ Problem Solver
≈90
Die/Cut-Off Grinder
Page 11
N·m
407 N·m
ing torque t r a t s h it w limitation
→ Sensational offer
8-pcs. Uni-Flex Belt Tool Set
Page 5
ht and 1.2 kg lig low-noise
189,
00 €
Technical data: Torque tightening: Torque releasing: Idle speed: Vibration: Noise performance level: Noise pressure level:
≈90 N•m (≈66 fb-lbs) 407 N•m (300 ft-lbs) 12.000 RPM 3,1 m/s² 89 dbA 83 dbA
Selector one-hand switching
→ Innovation Air consumption: Operating pressure: Hose cross-section: Connecting thread:
LED Super Bright Lamp
Page 4
113 L/min 6,3 bar (90 psi) 3/8" - 10 mm 1/4"PT
Twin hammer industrial hammer mechanism
→ New product
3-pcs. gap dimension gauge
Page 10
1 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
ERGOTORQUE®precision torque wrench with ratchet head
With inspection certificate
DIN EN ISO 6789
3/8” 1/2”
Certificate Precision ±3%
- Inspected and supplied with certificate according to DIN EN ISO 6789, traceable to national standards - Option of converting to 3/8" with optional mushroom head reducer 516.1423 - optionally with T handle square drive - for convenient manual pre-screwing (516.1424 for 3/8" and 516.1444 for 1/2" see bottom right) - Clearly audible and palpable release signal after the desired torque value has been achieved - Overload guarantee of 125 % of the maximum scale or torque value - Long service life
+/-
Setting fixing: A blue ring on the slide-in knob that you can see through the finger grips indicates: "Important: Fix the setting" Fix the torque setting by pressing in the slide-in knob
3%
Handle: The ergonomic, two-component handle guarantees safe and fatigue-free working
CLOCKWISE FASTENING
ANTICLOCKWISE FASTENING
Ratchet head: Ratchet head polished with robust 30-tooth mechanism Controlled clockwise and anticlockwise use Change the direction of rotation by simply turning the mushroom head Highest levels of precision due to the sliding roller bending mechanism
Main scale: Generously dimensioned window with magnifying glass Graduation in N•m and Lbf•ft a
Micrometer scale: Micrometer scale ring for fine setting Generously dimensioned window with magnifying glass Fine graduations possible per key type of 1.0 / 0.5 / 0.25 to 0.1 N•m
Corrosion: Steel tube body, powder-coated
Precision ±3 % of the set scale value Repeat accuracy and precise at a minimum 5,000 load changes
516.1412 516.1422 516.1432 516.1442 516.1472 516.1482
1/4" 3/8" 1/2" 1/2" 1/2" 1/2"
N•m
lbf•ft
1 - 25 5 - 50 10 - 100 20 - 200 60 - 320 80 - 420
0,8 - 18 4 - 37 8 - 75 15 - 150 45 - 236 60 - 310
Serial number: Individual serial number for unique product identification
Scale N•m 0,1 0,25 0,5 1,0 1,0 1,0
L mm 289 350 412 500 585 678
ØD mm 35 45 45 45 45 45
H mm 18 23 23 23 23 23
460 610 910 1300 1450 2100
Electronic Torque Adapter, Universal
109,00 € 109,00 € 115,00 € 115,00 € 149,00 € 198,00 € With inspection certificate
DIN EN ISO 6789
Certificate Precision ±1%
3/8” 1/2”
516.4705 516.4710 516.4715
2
1/4" 3/8" 1/2"
N•m
lbf•ft
Scale
6 - 30 27 - 135 40 - 200
4 - 16 20 - 99 30 - 147
1 Digit 1 Digit 1 Digit
A
Ø-D mm 45 45 45
H mm 17 21 21
3/8” 1/2”
Universal use in conjunction with commercially available torque wrenches with rotary square box wrench - just use it in place of the standard box wrench - A sensible addition/particularly helpful in confined spaces - makes possible quick, manual pre-tightning of screw connections - ergonomically shaped T handle female square drive according to DIN 3120 - ISO 1174 with ball loch
- Measuring precision: ±1 % tolerance with respect to the displayed scale value - Repeat accuracy and precise at a minimum of 5,000 load changes - for controlled testing of clockwise and anticlockwise fastening - for testing, measuring, checking and making adjustments - for use with a standard drive tool - Display mode: Track (continuous display) and Peak (peak value detection) - Digital scale in N•m, lbf•ft, lb•in, kg-m und kg-cm for precise measurement - large LCD display for optimum legibility with automatic switchoff - including storage function for 50 values - An audible 3-way signal (buzzer) indicates that the desired torque value has been achieved - Female square drive according to DIN 3120 / ISO 1174 with ball stop - Individual serial number for product identification - including certificate in accordance with DIN EN ISO 6789 - Traceable to national standards L mm 75 75 75
T-handle box wrench
180 182 183
69,00 € 69,00 € 69,00 €
516.1404 516.1414 516.1424 516.1444
3/8" 3/8" 1/2" 1/2"
1/4" 3/8" 3/8" 1/2"
D mm 83,0 83,0 100,0 100,0
L mm 72,0 72,0 83,0 83,0
51 51 97 107
9,80 € 9,80 € 9,80 € 9,80 €
be Ø 8.5 pro
Mirr or f
un on cti
Flex m irro r
Zoo m tion nc fu
/ probe Ø ent 8.5 m h
AV c
on
cto ne
Hook att a
c
0° for probe Ø /11 5 0°
e
r fo
be replace Pro ab l
.5
70 °/9
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
be Ø 8.5
Pr o
.5 / 6 LED s
M
net attachme ag n
t
/p
gn Ma
b
8 eØ
Pro be
pro
et attach
me n
r
t/
TV/AV 15" max.
Ø
8.5
/ 6 LE Ds
e rob Ø 8.5
Advantages of the "BASIC" version: - System is portable and battery-powered - Excellent image quality - Wide angle of viewing - Probes are waterproof to 1 m / oil- and petrol-resistant - Basic System probes are compatible with one another and interchangeable
- Extension up to 100 m with the same image quality - Additional function: Zoom (1.5 fold enlargement) and reflection - Accessories such as mirror / magnet and hook screwed safe on the head - Easy to handle/operate - 4 or 6 dimmable high-performance LEDs
550.5355 BASIC Videoscope set Ø 5.5 mm, 6-pcs.
550.5380 BASIC Videoscope set Ø 8.5 mm, 7-pcs.
Scope of supply: 1 x Hand-held unit 1 x Probe Ø 5.5 mm with front camera, semi-rigid, length 1 m 1 x AV cable 2 m 1 x Mirror attachment, 70° 1 x Mirror attachment, 90° 1 x Mirror attachment, 110° Supplied complete in a plastic carrying case
Scope of supply: 1 x Hand-held unit 1 x Probe Ø 8.5 mm with front camera, semi-rigid, length 1 m 1 x AV cable 2 m2 x mirror attachment, can be set flexibly 1 x Magnet attachment 1 x Hook attachment Supplied complete in a plastic carrying case
399,
00 €
Ø 5,5 mm
199,
Ø 8,5 mm
00 €
1 m - max. 100 m
Ø 16 mm
550.5385 BASIC extension cable, 3 m
64,
90 €
3 A
150.4300 LED Super Bright Lamp
550.1160 Flexible inspection lamp set, 4-pcs. The ideal miniature penlight with practical accessories. Halogen lamp with a flexible, shapeable swan-neck probe - Including flexible fibreglass attachment - impact-resistant housing with pocket clip - Supplied with 2 x 1.5 V AAA batteries - In plastic box measuring L 210 x B 150 x H 25 mm
- Up to three-fold light efficiency compared to standard type lamps due to 3 Super Bright LEDs - Constant brightness for the entire lighting period - 100 % waterproof/dustproof - Highest degree of protection IP68 - Intelligent, microprocessor-controlled charging of the lithium battery. A loading indicator light shows when the battery will be flat in about 30 min - Charger with 230 V mains connection - Can be used indoors and out of doors
Technical data: Operating time: 60 h max. Total length: (with swan-neck probe) 300 mm Ø lamp/swan-neck probe: 6.5 mm Length of fibreglass attachment: 175 mm Ø fibreglass attachment: 3mm Total weight: 230 g
280 mm
Advantages of induction charging: - No inconvenient plugging/unplugging necessary - No contact loading/wear - Contact proof and potential-free - Hermetically encapsulated - Failsafe
Technical data: Battery: Batteries: Power output/luminosity: Charging voltage: Charging time: Operating time: Service life of LEDs: Operating temperature: Weight of lamp: Housing Ø min/max:
89,
24,
3,7 V / 2400 mAh Polymer lithium 3 W/1600 Lux AC 230 V-50 Hz 5h 4h ~100,000 h 0 °C - +40 °C 340 g 44/55 mm
90 €
960.1150 Micro soldering set, 13-pcs. Practical, gas-driven micro soldering set - can be used on a portable basis and battery-powered - perfect for detailed work and Brazing, rinking confined spaces nd sh - gas feed is steplessly ldering a o s adjustable - Filled with commercially available ISO butane gas (cigarette lighter gas) - Supplied with wide range of accessories in a plastic box
00 €
550.1050 Magnetic Lifter and Claw Gripper Set, 2-pcs. Ideal for picking up or positioning screws or small components. Flexible and extra slim versions for cramped and deep working areas.
14,
600 mm
Technical data: Claw gripper max. gripping Ø: 20 mm Design: Stainless steel Length: 600 mm Weight: 150 g Magnetic carrying force of magnetic lifter: 200 g Magnetic mount: Ø 4 mm Length: 400 mm Weight: 20 g
Technical data: Max. temperature with Bunsen burner: 1300° / 2370°F with soldering attachment: 400 °C / 750 °F Dimensions L x Ø: L=170 mm / Ø =18 mm Weight: 440 g Tank contents: 12 g Max. operating time: 60 min Scope of supply: 1 x gas soldering iron 1 x soldering head for screw-in soldering tips
90 €
1 x soldering tip, pointed 1 x soldering tip, 2.5 mm, diagonal 1 x soldering tip, 3.5 mm, diagonal 1 x soldering tip, 3.5 mm, chisel 1 x soldering tip, 7.0 mm, chisel
Ø4mm
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
4
1 x soldering tip, knife 1 x Bunsen burner nozzle 1 x singeing attachment, flat, =30 mm 1 x heat-shrinkable sleeve attachment 1 x soldering sponge 1 x roll of soldering wire
A
39,
90 €
115.1104 automotive hose Clip pliers set, 4-pcs. A combination of the most common hose clip pliers for the entire vehicle sector. Ideal for use in opening clips for: fuel, tank ventilation, coolant and screen wash, underpressure hoses, etc. - handles dip-insulated - all-purpose use Scope of supply and features: 1 pair hose clip pliers with double Bowden cable - ideal for low lying spring hose clamps - including locking - Length of Bowden cable: 600 mm / Weight 540 g 1 pair hose clamp pliers with prism holder - for self-tensioning spring hose clamps with three-point holder - self-opening - Length: 195 mm / Weight: 170 g 1 pair Clic hose clip pliers - for opening and closing reusable Clic hose clips of type Clic + Clic-R (Caillau/Serflex) - self-opening/length: 180 mm / Weight: 200 g 1 pair hose clip pliers, 45° angled head - for spring hose clamps that are difficult to get at - including locking/rotating cheeks - Length: 220 mm / Weight: 210 g
a
150.2090 1/2" impact spanner, 560 + 100 mm Highly efficient impact spanner for undoing frozen locking bolts, e.g. on belt pulleys to install and dismantle compensating wave washers without needing to dismount the radiator. - to release frozen locking bolts, e.g. in the engine compartment - optimum release torque due to the impact effect despite confined space - 1/2" female square drive according to DIN 3120 / ISO 1174 with ball stop - can be combined with any 1/2" socket - with protective handle impact
b
where the impact screwdriver can't get at! d
c
99,
00 €
a
b
c
560 mm
Areas of application: VW, Audi, Mercedes Benz, Toyota etc.
d
115.1260 Pipe Connector Set, 22-pcs. Assortment of tools for releasing or unlocking spring hose caps - versatile and all-purpose for use in the entire vehicle field - fits all common vehicles - Delivered in a sturdy plastic case
high force releasing
Areas of application: Air-conditioning systems, fuel and air lines as well as hydraulic lines
m
150.3160 8-pcs. Uni-Flex Belt Tool Set Using the new Uni-Flex Belt Tool Set, you can now install new elastic V-ribbed belts quickly and professionally. Advantages: - No damage to the belt pulley and the belt - minimum force required - wide operating range due to different assembly tools Scope of supply: 1 x Installation tool Type 1, 50 mm dia. 1 x Installation tool Type 2, 32 mm dia. 1 x Fixing nut M8 1 x Knurled wheel 1 x fixing bolt M8 x 65 mm, tappet Ø 5.6 x 11.5 mm 1 x fixing bolt M8 x 65 mm, tappet Ø 5.6 x 32.5 mm 1 x fixing bolt M8 x 40mm, tappet Ø 5.7 x 20.0 mm 1 x fixing bolt M8 x 25 mm, tappet Ø 5.9 x 11.5 mm
59,
911.1395 Spline Tooth Impact Bit Socket Socket with special profile similar to RIBE for cylinder head studs - extra-long, phosphated version - Use on VAG engines (VW, Audi, Seat, Skoda) Technical data: Size: M9/10 Actuator: 1/2" Weight: 110 g
00 €
128 mm
00 €
92 mm
69,
100 m
Application: PSA and Ford engines, e.g. Fiat Doblo, Ford Fiesta, 1.4 / 1.6; Focus 1.6; Citroën e.g. C4; Peugeot e.g. 307, Dacia e.g. Logan, BMW, Smart, Mini, Chrysler, VAG, Alfa Romeo, Volvo, Mazda, Opel, etc.
59,
00 €
7,
90 € 5 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
155.5005 Oil Filter Wrench Clamping wrench for all-purpose use installing and removing filters and filter cartridges. - The dimpled steel band gives you a secure hold on the filter and ensures positive releasing - Set to the filter diameter by turning the knob at the end of the handle - ergonomic handle shape for fatigue-free and vigorous working Technical data: Length of belt: Weight: Length of handle:
Thread repair system
540 mm 250 g 170 mm
ange Working rmm 65-105
19,
90 €
150.1460 Sump Thread Repair Set M15, 21-pcs. A sturdy and rapid solution for repairing defective oil drain plug threads without the expense and time and effort needed to replace the sump. You use the tap to simply remove the damaged thread and at the same time to enlarge it to the next size. Version M15 is the most common size of drain plug thread; this makes it an all-purpose thread for use with cars and vans.
Assortment of tools for repairing stripped, damaged or worn-out glow plug or spark plug threads in cylinder heads - Simple handling and professional repairs - Fast repairs without dismounting the cylinder head - Completely solid and gas tight seat of the inserts - Extremely thin-walled inserts with rust protection coating - including tap and assembly tools - Quick repairs without the expense of keeping stocks of components - Delivered in a sturdy wooden box Delivery per thread size: 1 x tap for rethreading the original thread 1 x reamer for clearing the damaged original thread 1 x tap for repair threaded bushing 1 each 5 repair threaded bushing (some in different lengths per dimension) 1 x - driving tool (some in different lengths per dimension)
150.5020 Repair Set M8x1
90 , 49 €
Scope of supply: 1 x special tap M15 x 1.5 10 x oil drain plugs M15 x 1.5 (drive: hexagon SW 19) 10 x aluminium sealing rings for M15 Weight: 465 g Dimensions of box: 160x85x33
lugs
for glow p
9-pcs.
39,
150.5040 Repair Set M10x1
69,
90 €
150.1305 Thread Extractor Set, 25-pcs.
9,2 - 9,5 mm 5 x HSSE drill bits Ø 3,2 - 4,8 - 6,4 - 8,0 - 8,7 mm 5 x extractor pins Ø 3,2 - 4,8 - 6,4 - 8,0 - 8,7 mm 5 x extractor nuts Ø SW 10 - 11 - 13 - 14 - 17 mm
lugs
for glow p
15-pcs.
for M5-M16 screws and bolts; comprehensive and proven system for removing stripped screws and stud bolts.
150.5060 Repair Set M12x1,25
79,
A For a threaded bolt broken below the surface, use the appropriate guide sleeve B. Prebore the broken thread section. Then drill accordingly. B For a prominent threaded bolt, put guide sleeve B on the bolt. Prebore the threaded bolt then drill accordingly. C For a threaded bolt broken at surface level, punch and prebore in the centre. Then drill accordingly. D Hammer the appropriate extractor pin C into the drilled hole. E Push extractor nut D down onto the pin. Steadily extract the broken thread bolt, without tilting.
6
B
C
D
90 €
lugs for glow pplugs and spark 21-pcs.
150.5080 Repair Set M14x1,25
Consists of: 10 x guide sleeves Ø 4,0 - 4,8 - 4,8 - 4,8 - 6,0 - 7,1 - 7,1 - 7,1 -
A
90 €
79,
49,
E
A
90 €
lugs
90 €
p for spark 21-pcs.
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
122.1290 Universal Flaring Tool Master Set, 15-pcs.
Consists of: 1 x Clamping jaws set 4.75 mm 1 x Clamping jaws set 5.00 mm 1 x Clamping jaws set 6.00 mm 1 x Flange pin SAE 4.75 + 5.00 mm - OP1 1 x Flange pin SAE 6.00 mm - OP1 1 x Flange pin SAE 4.75 + 5.00 mm + 6.00 - OP2 1 x Flange pin DIN 4.75 + 5.00 mm 1 x Flange pin DIN 6.00 mm 1 x Locking screw M12 x 1.25 Complete range including shearing tool/bender and 1 x Base body: tube trimmer for professional flaring 1 x hydraulic spindle 2-pcs. with toggle - Lightweight and handy 1 x Grab handle: - Specially designed for use directly on the vehicle's 1 x 3 in 1 mini bender brake or hydraulic lines 1 x internal deburrer pindle - For thin-walled steel, aluminium and copper lines; 1 x mini pipe cutter ydraulic s H metric/inch 2t - For fabricating convex + double flange arrangements (DIN/SAE standards) - Quick and accurate results thanks to straight flanging movement (non-rotating), which means that there is no breakage of the pipes during flanging - No damage to lined pipes
159,
00 €
http://www.kstools.com/de/videos.html
518.0350 CHROMEplus® Double-Ended Ring Spanner Set, 3-pcs.,10-12 mm, open, with joint Open double-ended line wrench with a rigid and a flexible end Versatile with many uses for hydraulic and brake lines, power steering, air conditioning lines, etc. - The joint end makes it possible to work even in confined spaces - The hexagon profile guarantees a safe hold even when using a great degree of force - Rigid side angled at 15°/openings offset by 15° - Chrome vanadium
230°
39,
Scope of supply: 1 x open double-ended ring spanner with joint SW 10 1 x open double-ended ring spanner with joint SW 11 1 x open double-ended ring spanner with joint SW 12
150.2210 Universal Brake Service Assortment, 18-pcs. All-purpose, for use during maintenance and service work on drum flange and disc brakes - Dismantling and assembling brake drum and saddle - Resetting piston in the brake calliper - Removing spring seat (brake shoe) - Operating handbrake adjustment - Hinging and unhinging brake springs Applicable for, e.g.:
90 €
Brake Calliper Files For cleaning the brake calliper before installing new brake pads - Removes stubborn brake shoe residue, rust, etc. - Blade with rough side milled at an angle - cut-off edges and unidirectional stroke prevent damage to the dust boots - with flat scraper function on the front end - with two-component handle and hanging loop - narrow design is particularly suitable for Japanese vehicles
cars, transporters etc.
Drum ands disc brake
B mm
129,
00 €
L1 mm
L2 mm
calliper 12,0 270,0 150,0 19,90 € 157.0950 Brakefile Brake calliper 157.0960 file extra 10,0 270,0 150,0 24,90 € narrow
7 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
515.3100 Compressed Air Assembly Unit for Universal Boots Using this tool, you can change directly on the vehicle the drive shaft boots on the axle and transmission sides - suitable for all commercially available universal axle boots - Complete working range from 20 - 120 mm with one unit - Also suitable for four-wheel drive vehicles - extra-large spreading diameter - With installed overload security in the form of a bursting disk - Spreading of the articulated arms by means of compressed air and can be easily adjusted - no additional lubricant necessary - Cold-insulated handle - Ultra-light housing made of sturdy special plastic - Supplied including 1/4" coupler plug Technical data: Working range: Operating pressure: Hose diameter: Connection thread:
Micro Fine Gauge Gloves - black - CE / EN 388 [1131] - very pleasant fit - particularly breathable - with PU coating on the inside - highly suitable for working with small components - with printed logo
20-120 mm max. 8 bar 3/8" - 10 mm 1/4" PT
109,
00 €
Size
set of
310.0470
L
12
15,90 €
310.0475
XL
12
15,90 €
310.0480
XXL
12
15,90 €
115.1039 Earless-type Hose Clamping Pliers
115.1053 O-clip hose clamp pliers, 240 mm
115.1186 Hose strap cutter, angled
Special pliers for mounting and unmounting "earless-type" hose clips - for work on axle boots, radiator and fuel hoses - Secure grip due to the knurled handles - for all-purpose use with cars and vans, e.g. VW-Audi, etc.
Special pliers for tightening (tensioning) von two-ear clamps (Oetiker system) - No damage to boots or hoses - Ear hold-down facility prevents the ears from standing up - Extra-robust design for steel plate and V2A clamps - dip-insulated handles with 1/2" hexagonal recesses suitable for use in conjunction with torque wrenches - Can be used on axle boots, radiator and fuel hoses e.g.: VW, Opel, Seat, GM, Ford, Nissan, Mercedes, Mazda, Honda, Chrysler, BMW, Audi, etc.
Pliers for opening (cutting open) earless-type hose clips - Head angled for use in confined spaces - Pliers self-opening with dip-insulated handles - Chrome vanadium pliers head - for clips on axle boots, radiator and fuel hoses - universal usage in the sector passenger cars and transporters
1/2"
90 , 12 €
A mm
D mm
L1 mm
L2 mm
0,0-60,0
36,0
230,0
25,0
8
320
A
90 , 24 €
A mm
D mm
L1 mm
0,0-17,0
45,0
240,0
34, L mm
540
220,0
345
90 €
160.0367 Hydraulic Steel Jack 2t, 70-490mm The ideal jack for daily use in the workshop! - very low underclearance for use with low-slung vehicles too - Foot pedal for quickly bridging the idle stroke - with just a few strokes, the jack is at its maximum height - controlled lowering by turning the pump lever - pump lever wrapped in foam at the bottom - very manoeuvrable due to two oil- and acid-proof nylon steering rollers - with integrated screw tray - lifting plate with rubber pad/diameter 120 mm - overload protection with overpressure valve - solid steel structure/large base surface for stability
160.0370 Quickaction steel axle stand
kly al for quic oke d e p h it w tr the idle s bridging
Particularly robust steel structure for securing and supporting loads - high stability due to four feet with base plate - for heavy vehicle weights - solid cast steel load-bearing pile - 13-step manual quick adjustment using tension lever - Can be used in an optimum way combined with jacks - Supplied as a pair Technical data: Max. load: 3t Min. height: 295 mm Stroke: 130 mm Max. height: 425 mm Weight: 8 kg Pedestal dimensions: 200x190 mm
Technical data: Max. lifting load: 2t Min. height: 70 mm Stroke: 420 mm Max. height: 490 mm Length: 700 mm Weight: 43 kg
36, 259,
90 €
Max. load 3t
00 €
160.0375 100.4010 Tyre Manoeuvring roller fitting paste 5 kg, shell set, 2-pcs. white
100.4015 Tyre fitting paste 5 kg, black
Ideal for manoeuvring vehicles on a firm surface - Steering rollers allow you to manoeuvre in the tightest spaces - for accommodating vehicles on a space-saving basis during breaks in repair work (e.g. with the engine or transmission removed, body or axle damage, etc.) - with four solid metal steering rollers on ball bearings
For fitting and dismounting rubber tyres on steel or aluminium rims - optimum sliding capability combined with care for the rubber - Rapid deflation - optimum frictional connection between the tyre and the rim - no white residue left on the tyre's sidewall - Also suitable for wide-base tyres
900 kg y/pair ad capacit
For fitting and dismounting rubber tyres on steel, alloy and plastic rims - optimum sliding capability combined with care for the rubber - Rapid deflation - optimum frictional connection between the tyre and the rim - Also suitable for wide-base tyres Application areas: Cars, vans and motor cycles
lo
Application areas: Cars, vans and motor cycles
10,
90 €
100.4005 Tyre fitting paste 5 kg, yellow
15,
90 €
Marking chalk - smudge-proof/unbreakable - writes on any surface - Ø 14 / L=110 mm / sharpened
For fitting and dismounting rubber tyres on steel or aluminium rims - optimum sliding capability combined with care for the rubber - delayed deflation - perfect for relatively long fitting times with large-size tyres - optimum frictional connection between the tyre and the rim
Technical data: For tyre size: Max tyre width: Castor: Weight: Max load:
69, 13" - 16 360mm 4 x Ø 90mm 10kg/pcs 900kg/pair
00 €
Application areas: Trucks, agricultural and construction machinery
13,
90 €
Colour code
Ø mm
L mm
contents
100.4045
14,0
110,0
12
8,90 €
100.4050
14,0
110,0
12
8,90 €
9 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
150.1570 3-pcs. car body gap dimension gauge A practical aid when adjusting and installing new body parts or windscreens - Fix the gap dimension gauge on the solid part of the body using the sucker - Swivel the flexible gauge arm to position the blade in front of the body edge - Determine the body gap dimension by means of the number of blades (turn the rest of the blades upwards away from the body) - Place two gauges on the long side and one gauge on the short one. (e.g. with the passenger door: two gauges on the back door and one on the roof) - Now lay the new part directly on the gauges at fitting and fix it - Application areas: Wings, doors, rear windows, etc.
Advantages: - easy adaptation to the body due to swivelable design in all directions that is on ball bearings - 100 % plastic/rubber - no damage to or scratching of painted body parts - big time saving - no danger of the new part hitting already painted parts - You can take the original dimensions using the gauge on an undamaged side
59,
Technical data: Weight: 21 g x 3 = 63 g Length: 110 mm Sucker: Ø 30 mm Blades: L 45 x W 15 mm Number per gauge: 10 Blade thickness: 1 mm
New Product
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
00 €
911.8160 Plastic wedge set, 5-pcs.
115.1085 Axial grip pliers set, 5-pcs.
Versatile combination of the most common plastic wedges - allows you to work on the bodywork and inside the vehicle without damaging the paintwork - Insert for aligning body parts, for spreading orifices, mounting and dismounting trims, in conjunction with locksmith tools, etc. - Trims combined wedge with 45°-angled swallowtail opening, excellent for use as a clip lever too - particularly dimensionally stable and abrasion-resistant plastic - big saving compared to buying individually
For all-purpose use for fixing and aligning profile metal sheets in vehicle bodies - Reduces assembly time when installing body parts - Small size due to axial tensioning mechanism - Pliers fitted with catch and quick-release lever - Jaw opening can be set using the adjusting wheel at the end of the handles - Jaws made of Chromo special steel/handles nickel-plated - Can be used, for example, for straight and folded sheet metal that is to be set above or next to one another on doorways/back and side parts/ U and Z profiles/wheel arches/roofs/ sills, etc.
Scope of supply: 1 x trim wedge with felt, L=250 x W=20 mm 1 x plastic spacer and expander wedge, L=250 x W=20 mm 1 x plastic trim wedge, L=195 x W=30 mm 1 x plastic trim wedge, L=195 x W=60 mm 1 x plastic trim wedge, L=21 x W=26 mm
Scope of supply: 1 pair axial grip pliers type M 1 pair axial grip pliers type KKV 1 pair axial grip pliers type KSV 1 pair axial grip pliers type KGV 1 pair axial grip pliers type GGV
Special plastic http://www.kstools.com/de/videos.html
98,
29, 140.2090 Plastic panelbeating set, 3-pcs. Using the plastic panel-beating set, you can remove dents without damaging the surface - The tools hardly affect the paintwork at all - no further flaring of the sheet metal - also suitable for aluminium bodies - Tools made of extremely wear-resistant, high-molecular plastic
00 €
90 €
Electronic protection unit Protects the vehicle from peak voltages when welding - Safe protection of the electronics without disconnecting the battery when welding - Radio coding, seat settings, etc. are not lost - Including reverse polarity protection - solid construction with 25 mm² cable and fully insulated pole terminals - As soon as the green LED lights up, overload protection is guaranteed
Scope of supply: 1 x panel beater's hammer, pointed cone/crowned, head L=120 mm / Ø 30 mm, 200 g 1 x panel beater's hammer, pointed cone/crowned, head L=135 mm / Ø 40 mm, 285 g 1 x dolly, pointed cone, L=140mm / Ø 25.5 mm, 75 g
54, 10
90 € A
150.3080
Overvoltage protection,12V
480
54,90 €
150.3045
Overvoltage protection,12/24V
480
74,90 €
515.3075 Die/Cut-Off Grinder
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry pact super com
This tool is an absolute problem solver and should not be missing from any workshop that carries out repairs. It combines the advantages of a slender hand with the speed and power of an angle grinder. Therefore it saves a lot of valuable time, which is otherwise taken up with the often annoying task of loosening very worn or rusted connections. The adjustable spark guard guarantees good visibility on the component being worked on. A narrow, clean cut is achieved with the ultra-thin cutting disc. The very small height of the head allows you to work on extremely obstructed parts. The machine can be easily converted to right or left-hand at the handle, and this depends on spark trajectory. The r.p.m. is infinitely variable.
Right or Left-Hand
139,
00 €
Make sure you order the cutting discs too!!! 337.2010 High-Power Ultra-Thin Cutting Disc 100x1.6x16, VPE 25 pcs.
29, 00€
Versatile tool for removing coatings, paint, corrosion and for cleaning - ideal for body and car repair shops, vehicle builders and truck repair shops - Handle can be turned by 180°/good handling on the vehicle - All wearing parts can be post-purchased - Easily removes underbody sealant/sealing compound/ paint/rust/sealants/foils and lettering/accumulations of any kind, etc - Supplied with 7.2 mm connection plug In a plastic case
Technical data: Power output: 0.33 KW Idle speed: 4000 RPM Vibration: 0.5 m/s² Noise performance level: 95 dbA Noise pressure level: 82 dbA Air consumption: 99.05 L/min Operating pressure: 6.3 bar (90 psi) Hose cross-section: 3/8" - 10 mm Connecting thread: 1/4" PT Weight: 1.2 kg Scope of supply: 1 x Multi-sander, L=254 mm 1 x cleaning disk Ø 110 x width 28 mm 1 x foil eraser Ø 105 x width 30 mm 1 x rotary wire wheel adapter Ø 65 mm 1 x rotary wire wheel straight/spring steel wire 0.5 mm x width 23 mm 1 x rotary wire wheel bent/spring steel wire 0.5 mm x width 23 mm 1 x rotary wire wheel bent/spring steel wire 0.7 mm x width 23 mm 1 x hexagon socket chuck key
389, 515.3200 Pneumatic low vibration Jig Saw The light yet robust padsaw for most body shops - Vibration-damped - spares users and the machine - adjustable clip to set the depth of cut - powerful and suitable for double-wall sheets too - Operating lever with safety lock - Powder-coated aluminium housing - Precise working even with tight saw radii - Versatile range of uses in body construction/ sheet metal working/plastics and composite materials - Saw works extremely quietly/including exhaust hose - Supplied with 7.2mm connection plug and 1x 24Z blade - Complies with the requirements of Vibration Directive 2002/44/EC dated July 2002
Technical data: Stroke: Strokes/revs per minute: Strokes/min vibration: Noise pressure level: Air consumption: Operating pressure: Hose cross-section: Connecting thread: Weight: Length:
tion and Low-vibra quiet extremely
00 €
10 mm 10,000 <3 m/s² 80 dbA 48 L/min 6.3 bar (90 psi) 3/8" - 10 mm 1/4" PT 550 g 215 mm
229,
Please order appropriate blades at the same time!!! 11 mm
515.3890 Multi-grinding set, 7-pcs.
100 mm ZpZ
D mm
VPE
129.3740
32
1,0
5
6,40 €
129.3742
24
1,0
5
6,40 €
129.3744
18
1,0
5
6,40 €
129.3746
14
2,0
5
6,40 €
00 €
11 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
Cordless tool with lithium ion technology • High operating life + load capacity • Replaceable carbon brushes
✔ ✔
• Including charging station that switches off automatically • Quick charge function (1 Hour)
✔ ✔
• Housing made of impact resistant plastic
18V
10,8V
Display by pressing a button Capacity: 25% 50% 75% LED:
Cordless Impact wrench - 1/2" Square drive according to DIN 3120 / ISO 1174 - With practical left / right switching function - Continuously adjustable motor speed using an electronic switch - With industrial hammer mechanism - With lithium ion high-performance battery
Technical data: Drive Power output: Speed: Torque, max.: Idle current: Charging time: Batteries:
✔ ✔
• Light, ergonomic dual component housing
1/2"
402 N·m
Cordless nut driver - Hexagon socket adapter according to DIN 3126 - E 6,3 - With practical left / right switching function - Continuously adjustable motor speed using an electronic switch - With torque control - With lithium ion high-performance battery
Technical data: Drive Power output: Speed: Torque, max.: Torque levels: Idle current: Charging time: Batteries:
1/2" 18 V 0 - 2000 RPM 402 N·m 3.5 A 1 Hour 18 V - 3.0 Ah
100%
1/4"
24 N·m
1/4" 10,8 V 0 - 400 RPM 24 N·m 1 - 16 Stufen 2,9 A 1 Std. 10,8 V - 1,5 Ah
515.3520
Cordless Impact wrench, with 1 battery
329,00 €
515.3530
Cordless nut driver, with 1 battery
129,00 €
515.3521
Cordless Impact wrench, with 2 battery
449,00 €
515.3531
Cordless nut driver, with 2 battery
169,00 €
Cordless polishing machine
Cordless cartridge gun
- Polishing with fast and excellent results - Supplied with lambskin mop (Art. No. 515.3557) - With lithium ion high-performance battery
- ideal for for silicone- or acrylic based glue cartridges - Non-drip mechanism - steplessly adjustable feed - Amount processed per battery charge at ~ 20 °C up to 15 cartridges - With lithium ion high-performance battery
Technical data: Power output: Speed: Velcro backup pad: Idle current: Charging time: Batteries:
Technical data: Power output: Capacity of container : Advance without load: Jetting pressure: Charging time: Batteries:
18 V 1600 - 2300 RPM Ø 175 mm 3A 1 Std. 18 V - 3,0 Ah
10,8 V 400 ml 6,1 mm / sek 392 kgf 1 Std. 10,8 V - 1,5 Ah
515.3555 Cordless polishing machine , with 1 battery
289,00 €
515.3575
Cordless cartridge gun, with 1 battery
259,00 €
515.3756
409,00 €
515.3576
Cordless cartridge gun, with 2 battery
299,00 €
12
Cordless polishing machine , with 2 battery
A
331.0654 HSS-Thread-cutting tool set, 54-pcs. Large assortment including every common thread size up to M20 - Supplied in industrial case - straight-grooved hand screw taps according to DIN 352 and die-nuts according to DIN 223 - with adjustable tap wrenches and die-nut holders - including thread gauge and screwdriver - High-performance steel
M3 - M20
330.2620 HSS-G twist drill set, 19-pcs. ground, right-hand cutting, point angle 130°, Ø 3 and above crosswise grinding, Materials up to tensile strength of 1000 N/mm², high concentricity, Steel + according to DIN 338 N, eel Supplied in a stackable plastic box stainless st
Scope of supply: 19 x HSS-G twist drills 1,0 - 1,5 - 2,0 - 2,5 - 3,0 - 3,5 4,0 - 4,5 - 5,0 - 5,5 - 6,0 - 6,5 7,0 - 7,5 - 8,0 - 8,5 - 9,0 9,5 - 10mm
29,
90 €
330.2404 step drill set, 3-pcs. double-edged, right-hand cutting, helically fluted high feed, low blade loading crosswise or centre grinding according to DIN 1412 C el + Supplied: in plastic box 1 x 4,0 bis 12,0mm / 9 Stufen 1 x 4,0 bis 20,0mm / 9 Stufen 1 x 6,0 bis 30,0mm / 13 Stufen
79, Scope of supply: 2 x tap wrenches, adjustable, M 1-10 / M5-20 33 x hand screw taps (taper tap, second tap and bottoming tap): M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20 6 x die-nut holders according to DIN 225, two-armed: 20 x 5 / 20 x 7 / 25 x 9 / 30 x 11 / 38 x 14 / 45 x 18 11 x die-nuts: M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20 1 x screw pitch gauge, metric, for 12 leads: 0.5 to 1.75 mm 1 x Slotted screwdriver
336.0641 HSS-Hand screw tap set, 21-pcs., M3-M12, M3 - M12 in plastic case The ideal set for any repair shop and for mobile use - manufactured according to DIN 352/tolerance according to ISO 2 / 6H - right-hand cutting/flanks relief-ground - for through and blind hole threads - High speed steel/bright surface - For use in non-alloy and low-alloy steels of up to 800 N/mm² tensile strength as well as non-ferrous metals. - Supplied in high-quality, stackable plastic box Scope of supply: 1 each screw tap set, 3-pcs.: M3 / M4 / M5 / M6 / M8 / M10 / M12 Taper tap: Approx. 5 - 6 thread chamfer Second tap: Approx. 4 - 5 thread chamfer Shaving die: Approx. 2 - 3 thread chamfer
49,
90 €
Ste steel stainless
00 €
515.3203 HM burr set, 3-pcs. 00 , 249 €
Shaft 6mm / head Ø 10 mm staggered teeth/bright surface stable cutting edges – high cutting capacity Can be used in steels and cast metals that are highly-alloyed, rust-, acid- and heat-resistant Supplied: in metal case 1 x Form A with spur toothing 1 x Form G 1 x Form D
36, Design
90 € Head Total length height in mm
Shape A with spur 20,0 toothing
60,0
1x Shape G arch-pointed 20,0
60,0
1x
49,0
1x
Shape D ball
9,0
390.0190 Cooling and lubricating stick - Minimizes the wear on cutting tools - Removes friction and deformation heat and thus has a cooling effect - Contents 18 g
12,
90 € 13 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
517.0125 Double-head open-ended wrench set, 12-pcs., dim. 6-32 mm
517.0222 Double-ended ring spanner set,11-pcs., offset, dim. 6-32 mm
- DIN 3110 / ISO 1085 / ISO 10102 / ISO 3318 - Jaw position 15° angled - ground heads - matte satin finish - Chrome vanadium
- bihexagonal - DIN 838 / ISO 1085 / ISO 10104 / ISO 3318 - Rings 75° offset - thin-walled - polished heads - matte satin finish - Chrome vanadium
47,
Scope of supply: 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 18x19 - 20x22 - 21x23 - 24x27 - 25x28 30x32 mm
90 €
Scope of supply: 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 18x19 - 20x22 - 21x23 - 24x27 - 30x32 mm
42,
80 €
517.0043 Combination wrench, angled, 21-pcs., dim. 6-32 mm - Flank traction profile - DIN 3113 Shape A / ISO 3318 / ISO 7738 - Jaw position 15° angled - Ring 15° angled - polished heads - matte satin finish - Chrome vanadium
Scope of supply: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 30 - 32 mm
518.0960 CHROMEplus® Twist combination wrench set, 8-pcs. The special feature of this wrench is its middle that is twisted by 90°. - optimized leverage, since it is 20 % longer than conventional combination wrenches - Up to 40 % greater efficiency due to the ergonomically sensible 90° twist - Gripping point on the flat wrench side - this means that it spares your hands particularly when exerting a lot of force - Ring side angled by 15° with flank traction profile - Jaw position 15° offset - Chrome vanadium / highly-polished chrome finish Scope of supply: dim. 8 - 10 - 13 - 14 - 16 - 17 - 19 - 22mm
59, 14
A
90 €
89, g for exertin rce a lot of fo
00 €
836.7326 Basicline Roller cabinet with 7 drawers, 326-pcs.,
T-handle swivel head ratchet
1/4" 3/8" 1/2"
- Sturdy sheet steel construction with 0.8 mm sheet thickness - torsion resistant - Ball bearing mounted drawer guide - Drawers with 100% pullout - Drawers with skid-proof rubber inlay - Worktop with 10mm foam rubber inlay - With lateral metal handle - 2 wheels Ø 100 mm each - 2 steering castors Ø 100 mm with rolling and turning brake - Continuous lift rails - Electrostatically powder coated
326-pcs.
Single-stage locking system
Due to its unique construction, this ratchet can be used in almost any position you want This allows you to carry out screwing work in difficultto-access positions with more comfort and therefore with less effort. Technical specifications: Handle: - adjustable to five positions - Standard 0° + 4x locking points for 30°-50°-70°-90° Application, e.g. as T handle ratchet / screwdriver ratchet Ratchet head: - Ball locking device on the square drive with quick release function 1/2" - Head 270° pivoted steplessly - Adjustable pivoting fork for permanently tight seating of the swivel head - Fine toothing, 72 teeth - 5° backlash angle (short stroke) - Switching rocker for right / left operation
- Central locking of all drawrs via cylinder lock
Load bearing capacity per drawer: 30 kg Total load bearing capacity: 350 kg
1198,
00 €
1
Socket wrench set 1/4", 46-pcs. Socket wrench set 1/2", 24-pcs. Spark plug set 1/4"+3/8"+1/2", 27-pcs.
2
Spanner-Set, 35-pcs.
3
Punch and Hammer Set, 13-pcs. Combination Ratcheting Wrench Set, 16-pcs. Bit socket set 1/2", 32-pcs.
1
2
4
Screwdriver Set, TX, 6-pcs. Screwdriver Set, 11-pcs.
5
Bit set 1/4", 101-pcs. Hexagon socket T handle L-key set, 9-pcs.
6
Universal system insert (empty) Plier Set, 6-pcs.
3
3/8"
Modifix Length Weight ratchet
911.3890
3/8"
125mm
240g
29,90 €
911.1290
1/2"
300mm
765g
39,90 €
917.1490 Universal TX set 1/4", 8-pcs. Ideal for screw connections in confined spaces. - screwed joints - adjustable for a constantly tight fit - particularly short design - Supplied complete in plastic box
4
Scope of supply: TX8 - TX10 - TX15 - TX20 - TX25 - TX27 - TX30 - TX40 5
6
90 , 29 €
15 A
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
1st E D I T I O N 2011
For Vehicle Repair Workshops and the Automotive Industry
918.0675 CHROMEplus® Socket Wrench Set 75-pcs. 1/4"
79,
- Hexagon flank traction profile - chrome plated, mirror polished - Chrome vanadium - in sturdy sheet steel case
90 €
Scope of supply: 13 x Socket 1/4" Superlock: SW 4,0 - 4,5 - 5,0 - 5,5 - 6,0 - 7,0 - 8,0 9,0 - 10,0 - 11,0 - 12,0 - 13,0 - 14,0 mm 1 x METAL TEN Reversible ratchet 1/4", 125 mm, 1 x Mini reversible double ring end ratchet wrench: 1/4" x 1/4" 1 x Bit holder for 4 mm shaft 1 x Bit holder 1/4", 85 mm, magnetic 1 x Socket adapter 1/4" square, 1/4" hexagon drive 1 x Bit adapter socket 1/4" x 4 mm 1 x T handle with 1/4" slider 1 x Lokplus extension 1/4" with lock, knurled, 150 mm 1 x Extension with drive hexagon, 50 mm 3 x GEARplus® reversible combination ratcheting wrench: SW 8 - 10 - 13 mm 1 x GEARplus® Bit screwdriver handle 1/4", with ratchet function
29 x 1/4" bits, nickel-plated 3 x slotted 4.0 - 5.5 - 7.0 mm 3 x PHILLIPS® PH 1 - PH 2 - PH 3 3 x POZIDRIV® PZ 1 - PZ 2 - PZ 3 6 x hexagon socket 3 - 4 - 5 - 6 - 7 - 8 mm 7 x TORX® T10 - T15 - T20 - T25 T27 - T30 - T40 7 x TORX® with end hole TB10 - TB15 - TB20 TB25 - TB27 - TB30 - TB40 20 x 4 mm bits, nickel-plated: 4 x slotted 0.8 - 1.2 - 1.5 - 1.8 mm 3 x PHILLIPS® PH 0 - PH 00 - PH 000 3 x POZIDRIV® PZ 0 - PZ 00 - PZ 000 4 x hexagon socket 0.7 - 0.9 - 1.3 - 1.5 mm 6 x TORX® T3 - T4 - T5 - T6 - T7 - T8
5°
72 teeth
503.4204 GEARplus® Combination Ratcheting Wrench Set, 4-pcs. - Flank traction profile - based on DIN 3113 / ISO 3318 - Jaw position 15° angled - straight shape - exactly toothed with 72 teeth - chrome plated, mirror polished - Chrome vanadium Scope of supply: SW: 10 - 13 - 17 - 19 mm
24,
90 € With inspection certificate
DIN EN ISO 6789
Certificate
516.1905 Torque wrench set, 5-pcs. 1/2"
- Release accuracy: ±3 % tolerance with respect to the adjusted scale value - Repeat accuracy and precise at a minimum of 5,000 load changes - for controlled fastening in both directions - The direction of operation can be changed by switching the square drive. - Double scale in Nm and lbf ft graduation for precise setting - Large inspection window with magnifying glass function optimises reading precision - Torque activation can be clearly heard and felt due to the close-gap release - Two-component handle with a soft zone, which is ergonomic and comfortable for the hands - Individual serial number for product identification - including certificate in accordance with DIN EN ISO 6789 R - Traceable to national standards
with bag
Precision +/-3%
+/-
3%
Werkzeuge - Maschinen GmbH Seligenstädter Grund 10 - 12 D-63150 Heusenstamm Telefon: +49(0) 61 04 49 74- 0 Telefax: +49(0) 61 04 49 74-11 e-mail:
[email protected] http://www.kstools.com
Your Local Distributor
L
99,
00 €
20-200 N•m
01/2011 LL11-01E All prices are plus VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to 31.05.2011.
Lieferumfang: 1/2" ERGOTORQUE®basic 20 - 200 N∙m torque wrench 1/2" CHROMEplus® socket lengths 17, 19, 21 mm 1/2" CHROMEplus® Extension 125 mm
16
A
