Transcript
1
About us The headquarters are located in Brilon, Germany. 100+ highly motivated employees work within our unique team. Our engineers and technicians combine both, comprehensive technical know-how with long-term application experience. They are acknowledged throughout the world for providing individual complete solutions for silos, mixers, tanks and other kinds of containers and machinery.
Registered Brands and Patents REMBE® GMBH SAFETY + CONTROL (hereinafter referred to as „REMBE“) is trademark owner of following, international registered patents and brands and has the corresponding protective rights for. REMBE, IKB, KUB, ELEVENT, Q-Rohr, EXKOP, Q-Flap, ElevatorEX, Q-Bic, C-LEVER, UNIBAND, LESICOM, AXIS-LOAD US Patents and Trademarks (Registration Numbers): REMBE Name and Design (77680214), REMBE (77680160 ), KUB (77680225), IKB (77680129), Q-Rohr (7,905,244), Q-Atomizer (77680196). The use of these brands / patents / protective rights without the permission of REMBE is forbidden and result in infringement toward REMBE. REMBE explicitly reserves the right to follow those infringements. REMBE will take legal action for the claims resulting from those infringements
Maintenance-Free and Long-Term Durability REMBE®-weight scales guarantee reliable and accurate online control of bulk and solids at any time. By using these weight scales the process control and inventory management offer improved traceability and a greater ROI. The weight scales are used in all fields of plant construction, e. g. building, wood, food, chemical and pharmaceutical industries
●
simple installation – No need for expensive skilled personnel
●
multiple sensor use – If your process changes, the sensors respond accordingly.
●
utmost precision – Provides constant data
●
increase in efficiency – With economic cost of ownership
●
rationalisation in production – Increased product efficiency
Flow Meter
C-LEVER® direct Measuring accuracy up to 0.2 % independent of bulk density
4
RemFlow Measuring accuracy up to 1 %
Detection Sensor
MicroFlow Dust-free In-line Control of pneumatic or gravimetric conveyed bulk and solids
Conveyor Belt Weighing System for Self-Assembly
10
UNIBAND® for Output and Production Control, Truck Loading
Measurement Control Systems
9
11
EVA for Output Control
14
4
Accurate Flow Ratings with Different Bulk Densities C-LEVER® direct C-LEVER® direct (CLD) is the result of the permanent improvement of innovative REMBE® technologies. In close cooperation with the university of applied science in Düsseldorf, the C-LEVER® measurement procedure has been optimised to be an extremely precise and absolutely reliable measuring system for bulk and solids. The consistent pursuit of the goals that were set has led to a measurement procedure based on centrifugal force that is unique in the world.
System description The C-LEVER® direct (CLD) flow meter is characterized by the highest measurement accuracy. The various series are suited to the widest variety of applications – from truck pre-loading to controlling and dosing tasks in the bulk goods processing industry. The compact design and the low overall height enable space saving applications whilst reducing time.
APPR OV ED
high precision compact robust reliable economical
Features ●
Friction Compensation Technology (FCT): The system without drives or other mechanically moving parts, less maintenance.
●
Measurement accuracy is independent of bulk density.
●
Intelligent sensor arrangement ensures great stability of the zero point in the event of adhesions.
●
Dustproof housing guarantees flow to continue even when the system is switched off during installation.
Benefits at a glance
✔
transparency of stock levels and costs
✔
reliable production control
✔
optimised quality assurance
✔
less truck traffic on the factory site
✔
particle-preserving method of measuring bulk quantities
●
low purchase – and installation costs
●
improved availability
●
process optimisation
●
increase in efficiency
●
rationalisation in production
5
Accuracy of up to 0.2% Independent of Bulk Density C-LEVER® direct ng itori n mon catio i e l c p p man cal a rfor Typi d pe n a on ucti Prod age ing Dos load prek c u Tr
✔ ✔ ✔
F=m
v² 360 mm (14.17 in)
How it works
How to install
The C-LEVER®-principle is based on the laws of centripetal force. We have used this principle for the development of a very accurate, bulk density independent, friction compensated process. An accuracy of up to 0.2%* can be achieved even with completely different properties of the bulk goods.
The flange of the C-LEVER® direct (CLD) is adapted to any connection of your choice. Various standard connections are available. Non-standard connections, e.g. clamps are also possible on request. The scales themselves are simply installed in a vertical conveying section. Thanks to the low installation height of between 360 mm (14.17 in) and 700 mm (27.60 in), installation is fast and inexpensive.
The bulk and solids that are fed via a special intake with optimum feed point are diverted over a radial shaped sensor surface. According to Newton a counteracting centripetal force, directed towards the centre, of the same magnitude as the outward centrifugal force is created by this radial movement thus keeping the bulk product on its circular path. In the case of this optimum sensor arrangement of the C-LEVER® the counteracting force corresponds to the centripetal one, which has an absolutely linear relationship with the throughput and is measured by means of a special friction compensated force sensor (FCT).
The system accuracy of ± 1%* is achievable immediately. In the case of authorised product feed provided by customer or through a REMBE® intake, a maximum accuracy of 0.2 %* is achieved. For the purposes of quality assurance, the measurement accuracy of the scale is quickly checked at a later time with a calibration weight.
C-LEVER® direct 12 - 50 m3/hr ± 1 % * (423 to 1,765 ft3/hr)
625 mm (25.60 in)
C-LEVER® direct 12 - 50 m3/hr ± 0,2 % * (423 to 1,765 ft3/hr)
700 mm (27.60 in)
* All specified accuracies are related to the full scale reading at calibrated flow rate. C-LEVER® direct 50 - 600 m3/hr ± 1 % * (1,765 to 21,200 ft3/hr) Technical alterations reserved
6
Flow Rates from 50 m3/hr to 600 m3/hr (1,765 ft³/hr to 21,200 ft³/hr)
C-LEVER® direct HeavyDuty (HD) …especially for the measurement of bulk and solids with very high flow rates, e.g. for truck pre-loading or for incoming goods inspections. Trucks are loaded and/or unloaded with high accuracy.
!
short loading times correct loading/unloading
less truck traffic on the factory reliable inventory control
Data transfer to PLC
32.45 t
Technical Data 50 m3/hr to 600 m3/hr (1,765 ft³/hr to 21,200 ft³/hr) < ± 1%* standard accuracy ± 0,2%* in case of authorised product feed measuring sensor precision DMS measuring sensor error 0,017% power supply 10 V DC protection IP 68 ATEX - FM load cell optional up to zone 20 dry, good flow capability medium properties non-sticky particle size 0 to 50 mm (0 to 2 in) density 0.01 kg/l to 3.8 kg/l -15 °C to +70 °C (optional up to 150 °C) working temperature (-5 °F to 158 °F, option up to 300 °F) effective measurement range 1:20 reproducibility 0,1% steel St 52, powder-coated housing RAL 3000 (optional: stainless steel 1.4301) installation height 700 mm (27.6 in) Parts being in contact with the product are available in stainless steel, ceramic, polyurethane or other wear-resistant materials. *All specified accuracies are related to the volumetric range. max. flow rate
CLD HeavyDuty (HD)
without authorised product feed
max. flow rate
outlet
m³/hr
[ft³/hr]
mm
600
21,200
548 x 548
intake in
mm
with authorised product feed height
in
mm
21.57 x 21.57 396 x 146 15.59 x 5.75 700 Subject to revision
approx. weight
intake mm
height
in
kg
lbs
27.6
80
176 547 x 550 21.54 x 21.65 1,205
in
mm
approx. weight
in
kg
lbs
47.44
100
220
7
Flow Rates from 50 kg/hr to 50 m3/hr (110 lbs/hr to 1,765 ft3/hr)
C-LEVER® direct Precision (PRE) …especially for the measurement of bulk and solids in the fields of flow metering, filling, dosage and/or controlling.
! constant conveying rate low installation costs ease of operation Where to use
reliable inventory control
optional: customized design
The performance of a screw conveyor is regulated to remain constant despite varying particle sizes.
Technical Data (differing from CLD HD, s. page 6) max. flow rate
12 / 24 / 50 m³/hr (423 / 847 / 1,765 ft³/hr), depending on type
accuracy
< ± 0.2%* in the case of authorised product
particle size
0 to 30 mm (0 to 1.18 in)
installation height 1
360 mm (14.17 in)
installation height 2
up to 625 mm (24.61 in) with REMBE® intake or doser
power supply
24 V DC
control input
0-10 V, 0/4 -20 mA
protection
IP 62
other drives
pneumatic, open/close, etc. on request
feeder/batcher (optional)
The bulk quantity performance at the outlet of a rotary valve is detected with high accuracy despite differing bulk densities.
Parts being in contact with the product are available in stainless steel, ceramic, polyurethane or other wear-resistant materials. *All specified accuracies are related to the volumetric range.
CLD Precision (PRE)
without authorised product feed
max. flow rate
outlet
intake
m³/hr
[ft³/hr]
mm
in
1
35
175 x 160
6.89 x 6.30
mm
12
424
276 x 246
10.87 x 9.69
76 x 116
24
847
50
1,765
with authorised product feed approx. weight
height in
intake
height
approx. weight
mm
in
kg
lbs
mm
in
mm
in
kg
lbs
320
12.60
10
22
175 x 60
6.89 x 6.30
320
12.60
10
22
2.99 x 4.57
360
14.17
19
42
278 x 250
10.95 x 9.84
625
24.60
25
55
276 x 376 10.87 x 14.80 76 x 240
2.99 x 9.45
360
14.17
23
51
278 x 375
10.95 x 17.76
625
24.60
32
71
276 x 676 10.87 x 26.61 76 x 542
2.99 x 21.34
360
14.17
35
77
278 x 670
10.95 x 26.38
625
24.60
50
110
N/A
Subject to revision
8
Flow Rates from 50 kg/hr to 50 m3/hr (110 lbs/hr to 1,765 ft3/hr)
C-LEVER® direct FoodPharma (FP) …especially for the measurement of bulk and solids in food-, chemical and pharmaceutical industries: Quick and easy cleaning in case of product change. Product contamination is prevented.
!
perfect cleaning FM/ATEX approval
housing in stainless steel 1.4301 or higher optional: electropolished surface optional: through welded seams
Technical Data (differing from CLD PRE, s. page 7) accuracy
< ± 0.2%* standard
housing
stainless steel 1.4301(optional other stainless steels) feeder/batcher (optional) Filling a big bag with powder at the outlet of rotary valve. Contamination is avoided when changing the product.
power supply
24 V DC
control input
0-10 V, 0/4 -20 mA
protection
IP 62
other drives
pneumatic, open/close, etc. on request
Parts being in contact with the product are available in stainless steel, ceramic, polyurethane or other wear-resistant materials. *All specified accuracies are related to the volumetric range.
CLD FoodPharma (FP)
without authorised product feed
max. flow rate m³/hr
outlet
intake
with authorised product feed approx. weight
height
intake
height
approx. weight
[ft³/hr]
mm
in
mm
in
mm
in
kg
lbs
mm
in
mm
in
kg
lbs
12
424
276 x 246
10.87 x 9.69
76 x 116
2.99 x 4.57
360
14.17
19
42
278 x 250
10.95 x 9.84
625
24.60
25
55
24
847
276 x 376 10.87 x 14.80 76 x 240
2.99 x 9.45
360
14.17
23
51
278 x 375 10.95 x 17.76
625
24.60
32
71
50
1,765
276 x 676 10.87 x 26.61 76 x 542
2.99 x 21.34
360
14.17
35
77
278 x 670 10.95 x 26.38
625
24.60
50
110
Subject to revision
9
Inline Flow Meter according to the Impact Weighing Principle RemFlow RemFlow continuously records flow and feed rates of bulk material. This flow meter is easy to operate and clean. It is distinguished by its topmost reliability and precise measurements results.
Powdery up to granular bulk material with individual grain sizes up to 30 mm (1.18 in) are reliably detected. Thanks to its unique sensor arrangement, the system automatically compensates any adhesions. Its design enables easy and fast cleaning.
The various series are suitable for any number of different applications in the bulk material processing industry. RemFlow covers the needs when measuring flow rate consumption becomes necessary or when accounting of bulk material is required. When faced with reproducible conditions, RemFlow is suitable for tasks such as pre-loading and/or batching. The system possesses bespoken and precise measuring results for controlling and dosing of aggregates.
RemFlow is compactly constructed and includes standardised process connections. The housing’s simple, robust design is dustproof. RemFlow’s unique sensor arrangement renders signal compensation in the case of adhesion. The system provides options such as static calibration, a stainless steel design and direct connection via CAN, MODBUS or CANopen.
Based on proven deflecting plate technology the inline-measuring system offers a measuring accuracy of 1%.
In various installation sizes, the RemFlow is deployable up to feed rates of 150 m³/hr (5,296 ft3/hr).
Benefits at a glance
✔
easy handling
✔
fast cleaning
✔
high reliability
Technical Data RemFlow max. flow rate
1 t/hr up to 250 t/hr (0.98 up to 246 long tons/hr)
product
fine powder and granulates up to a size of 30 mm (1.18 in)
operating temperature
-40 °C up to +65 °C / -40 °F up to + 149 °F (higher upon request)
reproducibility
± 0.2 %
accuracy
± 1 % of the maximum flow rate of consistent product properties
material
coated steel (stainless steel 1.4301 or 1.4401 upon request)
sealing
silicone rubber
weighing plate
stainless steel 1.4301 or 1.4401
material
encapsulated stainless steel
temperature
-40 °C up to +85 °C (-40 °F up to + 185 °F)
output
2 mV / V at the capacity of the load cell; as an alternative directly on an interface via CAN, Modbus-RUT or CANopen
other areas
when using suitable load cells and Zener barriers
RemFlow
Housing
Load Cell
Technical Data RemFlow max. flow rate
H
A
D
particle size up to
weight
[m³/hr]
[ft³/hr]
[mm]
[in]
[mm]
[in]
[mm]
[in]
[mm]
[in]
[kg]
[lbs]
10
353
660
25.98
100
3.93
160
6.30
10
0.393
15
33
20
706
920
36.22
160
6.30
210
8.27
15
0.590
30
66
50
1,765
920
36.22
210
8.27
315
12.40
30
1.18
90
199
80
2,825
920
36.22
265
10.43
340
13.39
30
1.18
115
254
150
5,296
1,575
62.00
315
12.40
390
15.35
30
1.18
150
331
Subject to revision
10
Detection of Pneumatic- or Gravimetric Conveyed Bulk and Solids MicroFlow s ary tion cond plica g se p n i a l ) l l l ca tro mil Typi Con saw and der, g w n nt i o l-p sur fere Mea e. g. coa f dif o l o s( ntr fuel e co /slav ms r e t Mas trea g l uct s allin ntro prod Sign w co o d l n F a ng -/No itori Flow mon d l sho Thre
✔
✔
✔ ✔
System description
How it works
The Micro-Flow sensor reliable detects pneumatic- or gravimetric conveyed bulk and solids in horizontal and vertical metallic pipes. The sensor does not tower inside the pipe, thus mechanical wear and tear is avoided. The sensor works as a “stand-alone”-system with a programmable 20 mA output for flow rate control. It is suitable for self-assembly and can be easily calibrated.
The sensor uses a micro wave at 24.125 GHz with less than 5mW transmitting power. It is flush mounted via a 1/2” screw thread at the pipe wall. At its front side it transmits a measurable frequency. From the reflected signal the mass flow rate is directly detected and is read out as an analogue signal proportional to the mass flow rate.
Technical Data Transducer supply
24 DC from controller
power reception
0,5 A (incl. heater)
frequency
K-belt (24.125 Ghz)
output signal
0/4-20 mA (not standardized)
housing
stainless steel/cast aluminium
enviroment protection
IP 54
working temperature
-35 °C to +65 °C ( -31 °F to 150 °F)
Optionally an external controller interface can be used. It provides the evaluation and data log, data transfer via interface, e. g. Profibus. The Micro Flow is unaffected by temperature and pressure. It provides accuracy from 2 % to 5 % independent of installation position and flow profile of particles. In order to achieve a better accuracy especially in case of larger pipe diameters - the interconnection of two sensors in combination with one controller can be utilized. The controller provides easy calibration as well as displaying mass flow (kg/h, t/h) and absolute quantity (kg, t), graphic display, logical switching sequences, data logger via customary USB stick, line graph and remote maintenance.
Controller supply
230V / 115V constant from transducer
output
transducer supply 24 V
optional display
Benefits at a glance
50/60 Hz or 24V DC
input
0/4 – 20 mA, RS 422 interface counter contact (relay 2-lines LCD (backlighted) 1st line kg/hr or t/h / 2nd line kg or t absolute
environment protection
IP 54
housing
plastics
✔
easy self-assembly and calibration
✔ ✔
dust-free in-line control
✔
reliable, durable, maintenance-free
record of no-load and downtimes
11
Conveyor Belt Weighing System for Self-Assembly: Extremly Robust, Maintenance-Free, Economic UNIBAND® ions l licat ntro p p a n co l a o i c t i uc Typ prod g and t adin u ck lo u Outp r t and trol Con
✔ ✔
System description
How it works
Features
Belt scales are often used under extremely harsh surrounding conditions. When designing UNIBAND® great emphasis was placed on achieving the highest possible measurement precision by using robust and maintenance-free components. The weighing construction is made from square-section stainless steel. It is suitable for widths from 350 mm (14 in) to 2,400 mm (95 in) and for outputs from 10 t/hr (10 long tons/hr) to 2,500 t/hr (2,460 long tons/hr).
The belt scale records the material flow by means of the weighing frame resp. the incorporated load cell on a defined belt section. The weighing station converts the vertical pressure into a hori-zontal tensile force via two maintenance-free pivot bearings.
●
continuous measurement in stationary and conveying equipment
●
stainless Steel weighing frame
●
low installation height
●
fully encapsulated, laser-welded strain gauge transducer with mechanical overload protection
●
weighing unit with touch panel
●
easy adjustment due to comparable weighing
●
optional accessories: data logger with USB stick, WLAN data transfer or remote maintenance via GPRS
The single idler belt scale UNIBAND® with its stainless-steel weighing frame has a fully encapsulated, laser-welded strain gauge transducer. The unique design has proven itself even under harsh environmental conditions. It guarantees utmost accuracy and reliability. The customer effectively controls the processes and inventory by using the belt scale UNIBAND®. He can always rely on precise traceability and utilisation forecast. Loss of material is reduced in production. At the same time production and delivery are optimised.
The tensile force is transmitted to the load cell sensor and is converted by this into an electrical voltage signal. The weighing unit connected to the sensor evaluates the weight signal in relation to the belt speed tachometer. It displays the idler transport rate in „t/h” (tons per hour) and the selected count in „t” (e.g. tons per day, tons per month or tons per year).
Benefits at a glance
✔
easy and quick assembly and installation
✔
robust (anti-corrosion) stainless steel weighing frame
✔
process-safe and accurate
✔
maintenance-free
✔
economic
12
Conveyor Belt Weighing System for Stationary Conveyors UNIBAND® EVA Standard Technical Data UNIBAND® EVA Standard 230 V / AC +/- 10 % 50-60 Hz
supply
Option 24V DC power input
max. 12 VA
display
alpha numeric LCD display 2-lines, 10 mm digit height Illustration
output
123.45 t/hr (121.55 long tons/hr) kg (lbs) / hr on request
4x counters
each 123.45 t (121.55 long tons resp. (kg/lbs on request) individually resettable
resolution and scalling
programmable via keyboard (8digit with 2 decimal places)
summation meter
1 pc resettable via keyboard 3 pcs. coded resettable
input signal
full bridge-DMS load cell (via converter)
control signal
external: tare / conveying termination
output signal
1 potential-free counter contact 5 Hz (counter value wiper impulse contact)
EVA Standard Controller
0 (4) - 20 mA galavanically isolated power output (conveying performance) interface
RS 232 or RS 422 (option) Profibus DP (option)
working temperature range
-10 °C to +50 °C (14 °F to 122 °F) Housing (incl. separate port panel)
material
stainless steel
dimensions (WxHxD)
approx. 196x206x105 mm (7.71x8.11x4.13 in)
mounting
on the wall
environment protection
IP 55
Stainless steel weighing frame with overload protected load cell
Stainless Steel Weighing Frame
load cell
full-bridge strain gauge transducertab
power supply
9…12 V DC
construction
stainless steel
output signal
ca. 20 mV at rated load
connection
4- or 6-wire
weighing frame
stainless steel, 1.4301
dimensions
in accordance with belt width and belt construction Belt speed tachometer in robust design controlling the current belt speed
material
stainless steel, 1.4301
speed control
inductive proximity switch
connection
3-wire with connector Accuracy of the belt scale system
± 1 - 2 % of the volumetric range in dependence of installation position and belt conveyor Belt Speed Tachometer
13
Conveyor Belt Weighing System for Flow-Rate Control UNIBAND® EVA High End Technical Data UNIBAND® EVA High End 230 V / AC +/- 10 % 50-60 Hz
supply
Option 24V DC power input
max. 12 VA
display
5.7” (145 mm) touch panel 4-lines, 10 mm digit height Illustration
output
per channel (max. 4) 123.45 t/hr (121.55 long tons/hr) resp. kg(lbs)/hr
4x counters /
display in %, indicating up to 4 belt scales individually resettable
resolution and scalling
programmable via keyboard (8digit with 2 decimal places)
summation meter
1 pc resettable via keyboard 3 pcs. coded resettable up to 4 input signals
input signal
full bridge-DMS load cell (via converter)
control signal
external: tare / conveying termination
output signal
4 potential-free counter contact
EVA High End Controller
up to four 0 (4) - 20 mA galavanically isolated power output (conveying performance) interface
RS 232 or RS 422 (option) Profibus DP (option) / Ethernet / CANBUS / USB
working temperature range
10 °C to +40 °C (14 °F to 104 °F)
material
stainless steel
dimensions (WxHxD)
approx. 275x180x70 mm (10.83 x 7.09 x 2.76 in)
mounting
on the wall
environment protection
IP 65
Housing (incl. separate port panel)
Stainless steel weighing frame with overload protected load cell load cell
full-bridge strain gauge transducer
power supply
9…12 V DC via the corresponding controller
construction
stainless steel
environment protection
IP 65
output signal
ca. 20 mV at rated load
connection
4- or 6-wire
weighing frame
stainless steel, 1.4301
dimensions
in accordance with belt width and belt construction
Stainless Steel Weighing Frame
Belt speed tachometer in robust design controlling the current belt speed material
stainless steel, 1.4301
speed control
inductive proximity switch
connection
3-wire with connector Accuracy of the belt scale system
± 1 - 2 % of the volumetric range in dependence of installation position and belt conveyor Belt Speed Tachometer
14
Evaluation Units for Output Control
EVA High End Measurement Control System
EVA Standard Performance monitoring in a panel mount
LAC Signal converter in a DIN rail housing
With the EVA High End controller in its robust stainless steel casing monitoring, signalling, recording and temperature measurements are also feasible as controls or acceleration readings.
This simple measuring amplifier serves the monitoring of performance in kg/h or t/h. The flow of material per unit of time is measured. It offers two limit checks with relay output. The voltage or current output can be set to 0/4 … 20 mA and 0-10 V. The measuring amplifier has an RS-232 or RS-422 interface. Simple menu-driven programming of the measuring instrument is possible.
This signal converter converts the C-LEVER® DMS signal to 0/4 … 20 mA or 0-10 V. This can be displayed in a PLC for the monitoring of performance. Simple operation takes place via DIP-switch..
A 24-bit A/D converter collects the sensor readings and offers the highest level of precision combining with rapid sampling rates. The software can be customised for individual applications. Remote maintenance of the electronics can be performed worldwide via the mobile phone network. The measured data can be made available via the integrated Ethernet port in the customer's IT system or transmitted via the Internet. The optional Profibus interface allows the solution to be connected to the customer's existing PLC. The readings can be recorded onto a standard USB stick or a Compact Flash memory card. Optionally, the electronics can be equipped with a GPRS module for mobile communication via the mobile phone network.
Optional: DeviceNet or Profibus
Benefits at a glance
Benefits at a glance
Benefits at a glance
✔
visualisation of processes
✔
✔
✔
display with real time information
safety circuit as cable break detection
efficient, freely programmable controller
✔
simple operation
✔
intuitive operation
✔
simple operation and calibration
safety switching point
✔
paralleling of up to four load cells
✔
Further techniques on request. Ask for your individual solutions. We develop a solution to your most challenging application.
15
Intelligent Solutions for Weighing your Bulk and Solids
For further information or advice please contact our specialists - At your Convenience:
Frank Bickmann Senior Project Manager Advanced Measurement Systems
[email protected] T + 49 (0) 29 61 / 74 05 - 211
Eugenia Nickel Business Development Manager Eastern Europe
[email protected] T + 49 (0) 29 61 / 74 05 - 114 …since 2001 bei at REMBE®
…since 2000 at REMBE®
Herbert Müller Product Manager EVA
[email protected] T + 49 (0) 29 61 / 74 05 - 513
Gerd Mayer President REMBE®, Inc. Charlotte, NC / U.S.A.
[email protected] T + 1 (704) 716 7022 - 222
…since 1981 bei at REMBE® …since 2006 bei at REMBE®, Inc.
Naud Luijerink Sales and Business Development Manager Sensor & Measurement Solutions
[email protected] T + 31 (0) 161 434 183
Michael MacClancy Managing Director REMBE® LTD London
[email protected] T + 44 (0) 207 630 03 64
…since 2010 bei at REMBE®
…since 2009 bei at REMBE®
Klaus Berels Sales Engineer Control Division
[email protected] T +49 (0) 29 61 / 74 05 - 212
Peter Zabel General Manager REMBE® Representative Office Singapore
[email protected] T + 65 624 602 053
…since 2011 at REMBE®
…since 2009 bei at REMBE®
R E M B E® www.
|
rembe.us
|
A L L I A N C E
rembe.co.uk
|
rembe.de
|
rembe.sg
|
You are interested in learning more? Our Booklet of Bulk Flow Control (BOB) provides guidance for accurate flow ratings with different bulk densities. It gives examples of typical applications reflecting the flexibility of the C-LEVER® direct flow meter.
REMBE® - All rights reserved · ars nova · GBP-FMD-11061/0 · valid from 2011-10-07 · 1000 · Subject to revision without notice
Please download at www.rembe.com or call for: T +49 (0) 2961 / 7405-0
Distributor:
Gallbergweg 21 59929 Brilon / Germany T + 49 (0) 29 61 - 74 05 - 0 F + 49 (0) 29 61 - 5 07 14
[email protected] www.rembe.de
The copyright of all contents in this catalogue with its design, text, photos and graphics is owned by REMBE® GmbH SAFETY + CONTROL (except where otherwise stated); all rights reserved. REMBE® does not accept responsibility for any mistakes or technical changes which may occur due to progress in research and development. All copies made of this catalogue are legally prohibited. REMBE® reserves the right to change or update any information in this catalogue without notice. REMBE® will not accept any responsibility for mistakes that occur in the production or in the use of this catalogue. It is the sole responsibility of the operator to ensure that all REMBE® products are correctly used.
