Transcript
ACE PLUS CORP. DVI Extender via 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m Description DVI (Digital Video Interface) recently has become increasingly popular in the application of video transmission system. In view of the extreme of electrical performances, however, the traditional copper wire cable imposes limits on signal transmission distance and signal quality. In reality, optical fiber is of low dispersion, which in turn has the strength of longer signal transmission distance and better signal transmission quality in comparison to the traditional copper wire cable. ACE Plus DVIE008 provides not only the Digital Video but also the RS232 and Audio transmitting capability through the optical fiber. This all optical transmitting solution can fulfill customer’s need in far-end Video/Audio broadcasting and data control, which shows the advantage of high performance and good signal quality as well as low cost.
Features Long distance video, audio and RS232 transmission High resolution and image quality Pseudo-EDID No RF Interference by optical fiber Class 1 laser product complies with EN 60825-1
Application Remote monitor for traffic, industrial, military control LCD, Projector, Plasma display connection Large video wall system Theater
RS232
DVI
Audio
Audio
DVI
RS232
Application Setup
4x LC SM fibers
Page 1 of 7
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
ACE PLUS CORP. DVI Extender via 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m
Ordering information Part Number
Description
DVIE008-SS-T-XX
Transmitter side
DVIE008-SS-R-XX
Receiver side XX
Note DVI × 1, one-way RS232 × 1, Audio × 1
01 : US Plug for AC adaptor 02 : EU Plug for AC adaptor 03 : UK Plug for AC adaptor This product does not include optical fibers
Package include z TX module
×
1
z RX module
×
1
z 5V adapter
×
2
Optional：DVI cable、EU/UK/AU Plug converter of 5V adapter
Specification PARAMETER
SPECIFICATION
Max length
1500 m
Optical Power Budget
15 dB
Max resolution
1920 × 1080
Max DVI bandwidth
1.65 Gbps per channel
EDID support
Pseudo DDC
HDCP compliant
No
Operating voltage
DC 5V
Electrical Power consumption
NOTE 4 × 9/125μm SM glass fiber (The length difference between these 4 fibers should be less than 0.5m)
TX: 3W
5V/600mA
RX: 3W
5V/600mA
Operating Temperature
-10℃ to 50℃
Storage Temperatute
-20℃ to 75℃
Dimension
180 × 87 × 30
L × W × H (mm)
Weight
~ 600g
TX or RX
Page 2 of 8
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
ACE PLUS CORP. DVI Extender 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m Requirements
DVI Source (DVD player or PC)
DVI Sink (LCD TV or Projector)
100~240VAC 50~60Hz 0.2A electricity
Adapter Specification PARAMETER
SPECIFICATION
NOTE
Input
100~240VAC
US plug
Output
DC 5V
1.0 A
DC Jack
Inside 5V / Outside ground
US Plug
EU Plug
UK Plug
Pseudo EDID support There is virtual EDID data structure in TX module. This provides pseudo monitor information to the host. Then host can work at different modes by reading this data. It supports all standard modes such as VGA, SVGA, XGA, SXGA and UXGA…etc.
Page 3 of 7
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
ACE PLUS CORP. DVI Extender via 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m Dimensions
Fiber Power
Fiber
Source
RS232
DVI
Sink
Audio DC 5V
Unit：mm
Installation Important: Please follow the installation procedure below. Improper, or no operation may result if the start-up sequence is not correctly followed.
RS232
DVI
Audio
Audio
DVI
RS232
Application 1: Point to Point
4x LC SM fibers
Page 4 of 7
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
ACE PLUS CORP. DVI Extender via 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m Step 1 Carefully unpack the contents of the shipping group. Check the following items: z TX module or RX module z AC/DC Adaptor Step 2 Connect each 4xLC fiber cable one by one as indicated number. The channel “1” of TX corresponds to channel “1” of RX. The other channels are the same connection. Step 3 Connect the AC/DC adapter to the TX and RX module. Step 4 Use the DVI, RS232, and Audio cable to connect the each port of TX side to the corresponding ports of PC or DVD players. Step 5 Use the DVI, RS232, and Audio cable to connect the each port of RX side to the corresponding ports of display. Step 6 Power on the PC and display. Note1：The set-up of screen might be fitted to the display resolution. It is certain to happen such unfitness if it is first time to boot up in using this extender module. Then, go to Display Properties in Windows systems and click the tap of Settings. Then you can set the right display resolution to meet your display. Once you set the right resolution, you could see displaying the initial screen at the same resolution as just before you powered on.
Page 5 of 7
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
ACE PLUS CORP. DVI Extender via 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m
4x LC SM fibers
Audio
DVI
RS232
Application 2: Point to Multi-point
4 channel x 4 splitter
Note1: The Maximum quantity of the RX points should follow the optical power budget calculation and the limitation of the maximum transmitting length. Calculation of optical power budget Component Loss COMPONENT
Page 6 of 7
LOSS
LC connector
0.3 dB
Single mode fiber
0.5 dB/km
Coupler loss (1×2)
3.5 dB
Coupler loss (1×4)
7.0 dB
Coupler loss (1×8)
10.5 dB
Coupler loss (1×16)
14.0 dB
Coupler loss (1×32)
17.5 dB
SYMBOL
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
ACE PLUS CORP. DVI Extender via 4 x LC-LC Single-mode fibers Extends DVI + one-way RS232 + one-way Audio up to 1500m
Example for multiple monitor installation
2km TX
5m
1m
RX1
1x4
1x2
coupler
coupler RX2 RX3
… RX8
Figure 3 – Installation Setup
For example, we calculate the power loss from TX to RX1. In this optical path, we have 6 connectors, 2.006 km fiber, one 1×4 coupler and one 1×2 coupler. If we add all losses in this, we can get 14.5 dB in total loss. From the ordering information on page 1, we can choose the model whose power budget is greater than 14.5 dB for this installation. For example, Ace Plus DVIE008 has 15 dB power budget which is greater than 14.5 dB, so it can be chosen to use in this setup.
connector fiber loss 1×4 coupler 1×2 coupler
0.5 dB × 6 pcs 0.5 dB × 2 km 7.0 dB 3.5 dB Total loss
Page 7 of 7
= 3 dB = 1 dB = 7 dB = 3.5 dB 14.5 dB
Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com
