Transcript
®
Acoustic Privacy Panel Instructions ACC021
Package Contents Mounting Hardware (comes in box for item ACC022, separate from the Privacy screen)
Acoustic Privacy Panel
Flat-head screws
Clamp bracket
Support bracket
(qty 4)
(qty 2)
(qty 2)
Step 1 Before attaching hardware, remove the material from the pre-cut holes with your finger or a pencil. You should be able to see these pre-cut holes near the bottom of the panel. Line up the pegs on the Support bracket with the holes on your Acoustic Privacy Panel, and push them inside so the Support bracket is flush with the panel.
Step 2 From the other side, line the Clamp bracket up with those holes. Insert the Flat-head screws and tighten.
Step 3 Loosen both clamps so that the opening is wide enough to slide onto your desk. The included hardware will fit desktops up to 1.75’’ thick.
fig. 1 clamp on back of desk
fig. 2 clamp on side of desk
Step 4 Once on the desk, tighten the clamps onto your desktop (see figure 1). Note: If you’re attaching a Side Acoustic Privacy Panel, make sure the clamps are tightened onto the desk’s bracket (see figure 2).
!
Read all instructions before assembly. Failure to assemble properly may result in damage. © UPLIFT Desk • 1-800-349-3839 •
[email protected] • www.upliftdesk.com
ACC021/R03
®
Acoustic Privacy Panel Dimensions ACC021
Side Panel
Each pair of the Side panel model’s mounting holes are located 1.5’’ from each end, and 1.75’’ from the bottom.
Side view - All models .6’’ thick
22’’
15.5’’
1.75’’ 1.5’’
1.5’’
Back Panels
On every Back panel model, each pair of mounting holes are located 6.5’’ from each end, and 3.35’’ from the bottom.
40’’ model
52’’ model 52’’
40’’
22’’ 22’’
3.35’’ 6.5’’
6.5’’
64’’ model 64’’
22’’
72’’ model 72’’
22’’
©
Copyright Notice: This guide is a component of the UPLIFT Desk Acoustic Privacy Panel. This guide is a part of the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.
© UPLIFT Desk • 1-800-349-3839 •
[email protected] • www.upliftdesk.com
