Transcript
MODEL:
ACS-8P DESCRIPTION:
CONTRACTOR SERIES LOUDSPEAKER SYSTEM TYPE:
SINGLE AMP/TWO-WAY (bi-amp model ACS-8B also available) ®
ENCLOSURE:
30 Degree Trapezoidal FREQUENCY RESPONSE:
54 Hz - 16 kHz ±3 dB POWER HANDLING:
500w cont. / 2000w peak into 8 ohms SPL @ 1m:
124 dB cont. / 130 dB peak DISPERSION:
Horizontal: 60 degrees Vertical: 40 degrees
The ACS-8P (Passive crossover) employs a large format HF horn driven by a 2" (51mm) fluid treated compression driver, mated with a rugged 15" (380mm) LF cone driver. This fully arrayable loudspeaker can fill the largest churches, theaters, sports venues, convention centers and theme parks with clean, articulate sound. Large systems may be easily built up from multiple ACS-8 units, resulting in well behaved arrays that can provide high level coverage in vast spaces.
ENCLOSURE TYPE
ACS-8P Frequency Response w/controller: 54Hz to 16kHz (±3dB)
30 degree trapezoidal, optimally vented bass
FORMAT
Mono-amp, two-way. Controller optional
DRIVER COMPLEMENT
Low Frequency One Apogee 15" (380mm) permanent magnet cone type driver
10dB / div
High Frequency One Apogee 2" (51mm) horn loaded compression driver Nominal Impedance - 8 ohms
20Hz
SENSITIVITY 1
97 dB SPL
w/o controller: 95Hz to 16kHz (±3dB)
FREQUENCY RESPONSE
54 Hz - 16 kHz ± 3 dB, 1m on axis
SOUND PRESSURE LEVEL 2
124 dB continuous, 130 dB peak @ 1m
MAX POWER HANDLING 3
500 watts continuous, 2000 watts peak
100Hz
1kHz
10kHz 20kHz
10dB / div
DISPERSION 4
60 degrees Horizontal x 40 degrees Vertical
INPUT CONNECTORS
5-way Binding Posts
CABINET CONSTRUCTION
Multi-ply Baltic birch
GRILL
Coated perforated metal
RIGGING HARDWARE
4 internal 16 gauge steel backing plates. Accepts 1/4" - 20 thread. 12 pick points total
COLOR
Black - other colors optional
FINISH
Textured high strength epoxy paint
WEIGHT
86 lbs. (39 kg)
OPTIONS/ACCESSORIES
ACS-8P Controller (Model specific EQ and Limiting)
20Hz
100Hz
1kHz
10kHz 20kHz
®
ACS MAIN FRAME LOUDSPEAKER CONTROLLER POWER
LF OUT
SUB LINK
PIN 2+ PIN 3–
ACS-4B
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN ACS-4B LIMIT
TYPICAL BI-AMP LF XLR MODULE
Cables
LEVEL
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN PIN 2+
ACS-115 LIMIT
OUT
–
+
–
LIMIT
TYPICAL BI-AMP HF XLR MODULE
+
IN
PIN 3–
LEVEL
BI-AMP
TYPICAL SUBWOOFER XLR MODULE
LEVEL
ACS-1
TYPICAL FULL-RANGE TERMINAL-STRIP MODULE
"RS" Rear Serviceable model with rear access panel "SX" Weather Treatment for Harsh Environments Assorted Rigging Components Specifications subject to change without notice 1 watt @ 1 meter, unless otherwise specified Measured at rated MAX POWER HANDLING 3 EIA Standard RS-426A, eight hours. Note: Music program will yield higher figures. 4 6 dB down points 1 2
The ACS Controller consists of a MAIN FRAME which accepts four voicing modules. Modules are available for each of the different ACS loudspeaker types, with two module bays required for bi-amplified speakers. The controller provides factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Inputs and outputs are available with either XLR connectors or barrier strips. Mic input & EQ modules are also available.
ENGINEERING DATA
ACS-8P ENGINEERING DATA
ACS-8P Passive LOUDSPEAKER
ACS-8P 11.400" 289.56mm
7.125" 180.98mm
19.338" 491.19mm
9.966" 253.14mm
1.781" 45.24mm
4.206" 106.83mm
14.813" 376.24mm
6.761" 171.74mm 30.500" 774.70mm 13.590" 345.18mm
1/4-20 RIGGING POINTS 4 EA, TOP & BOTTOM 2 EA PER SIDE
26.939" 684.25mm
15 DEGREES
TOP VIEW
FRONT VIEW W/O GRILL
®
SIDE VIEW
BACK VIEW
2180 South McDowell Blvd. Petaluma, California 94954 USA Phone (707) 778-8887 Main Fax (707) 778-6923 ©Apogee Sound, Inc. 2/96 42-0708
