Transcript
MODEL:
ACS-Point5 ACS-Point5 Pro DESCRIPTION:
CONTRACTOR SERIES LOUDSPEAKERS TYPE:
MONO AMP/TWO-WAY ENCLOSURE: ®
Injection Molded FREQUENCY RESPONSE:
POWER HANDLING (into 8 ohms):
Point5: 60w cont. / 240w peak Point5 Pro: 100w cont. / 400w peak SPL @ 1m:
Point 5: 104 dB cont. /110 dB peak Point 5 Pro: 108 dB cont. /114 dB peak DISPERSION:
Horizontal — 100 degrees Vertical — 100 degrees
The ACS-Point5 and ACS-Point5 Pro are ultra-compact, high fidelity, full-range speaker systems designed for applications where small size is required. Both are perfect for monitoring, delay fill in theatres and distributed systems. The Point5 Pro also features a Ferrofluid™ cooled, Kevlar™ composite cone woofer designed for outdoor applications.
ACS-Point5 and Point5 Pro LOUDSPEAKERS ENCLOSURE TYPE
Injection Molded
FORMAT
Mono-amp, two-way. Controller optional
DRIVER COMPLEMENT
Low Frequency
POWER
ACS-Point5: Apogee 5.25" (133 mm) permanent magnet cone type driver
LF OUT
Nominal Impedance 8 ohms, both models SENSITIVITY 1
87.5 dB SPL / 100 Hz - 20 kHz
FREQUENCY RESPONSE
100 Hz - 20kHz ± 3 dB, 1m on axis; -10 dB @ 60 Hz
SOUND PRESSURE LEVEL 2
Point5: 104 dB continuous,110 dB peak @ 1m Point5 Pro: 108 dB cont, 114 dB peak @ 1m
MAX POWER HANDLING 3
Point5: 60 watts continuous, 240 watts peak Point5 Pro: 150 watts continuous, 600 watts peak
DISPERSION 4
Horizontal —100 degrees
INPUT CONNECTORS
Spring Terminals
GRILL
Coated perforated metal
RIGGING HARDWARE
Four 1/4-20 threaded inserts
COLOR
Black
DIMENSIONS
9.25" (235 mm) high by 6.25" (159 mm) wide (front) by 5.625 " (143 mm) wide (rear) by 7" (178 mm) deep
WEIGHT
Point5: 5.8 lbs. (2.6 kg) Point5 Pro: 4.5 lbs. (2.0 kg)
OPTIONS/ACCESSORIES
Point5 Controller (Model specific EQ and Limiting)
SUB LINK
PIN 2+ PIN 3–
ACS-4B
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN ACS-4B LIMIT
LEVEL
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN PIN 2+
ACS-115 LIMIT
OUT –
TYPICAL BI-AMP LF XLR MODULE
TYPICAL BI-AMP HF XLR MODULE
TYPICAL SUBWOOFER XLR MODULE
LEVEL
+
IN
ACS-1
TYPICAL FULL-RANGE TERMINAL-STRIP MODULE
The ACS Controller consists of a MAIN FRAME which accepts four voicing modules. Modules are available for each ACS loudspeaker model, with two module bays required for bi-amplified speakers. The controller provides factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Inputs and outputs are available with either XLR connectors or barrier strips. Mic input & EQ modules are also available.
Cables, Yoke
ACS-Point5 shown with optional yoke
PRELIMINARY DATA: SPECIFICATIONS SUBJECT TO CHANGE
–
LIMIT
Vertical — 100 degrees
Specifications subject to change without notice © Apogee Sound Inc. 4/97 42-0304
+
PIN 3–
LEVEL
BI-AMP
ACS-Point5 Pro: Apogee 5.25" (133 mm) Ferrofluid™ cooled, Kevlar™ composite permanent magnet cone type driver High Frequency BOTH MODELS Apogee .5 " (13 mm) Mylar tweeter
®
ACS MAIN FRAME LOUDSPEAKER CONTROLLER
1
1 watt @ 1 meter, unless otherwise specified 2 Measured at rated MAX POWER HANDLING 3 Max power with music program 4 6 dB down Points
ENGINEERING DATA
ACS-Point 5 and ACS-Point 5 Pro ENGINEERING DATA
Point5: 100 Hz - 20kHz ±3 dB Point5 Pro: 100 Hz - 20kHz ±3 dB (Both models:) -10 @ 60 Hz
