Preview only show first 10 pages with watermark. For full document please download

Active Wall Plate - Composite, S-video, Component Video

   EMBED

Share

Transcript

WP-28 Active Wall Plate - Composite, s-Video, Component Video & Audio Receiver The WP-28 is a twisted pair receiver for composite video, s-video, or component video and unbalanced stereo or S/PDIF audio signals. It converts a single audio and video input back into the original audio and video formats. Available in Gray, White & Off-White FEATURES Video Switching - Between either CV and component video or between s-Video and component. Audio Switching - Between unbalanced stereo and S/PDIF audio. Level (Gain) & EQ (Peaking) Power Connect™ System - Only one unit in a system, either thetransmitter or the receiver needs to be connected to a power source. System Range - Up to 100 meters (330’). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Wall Plate - 2 gang. Optional - RK−121WP 19" adapter (for EU size wall plates only). WP-28 TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: MAX. OUTPUT LEVEL: RESOLUTION: BANDWIDTH (-3DB): S/N RATIO: TOTAL GAIN: COUPLING: TND+N: POWER SOURCE: ACCESSORIES: OPTIONS: 1 RJ-45 CAT 5 shielded connector (CAT 5 in) 1 s-Video (Y/C) 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4p connector  1 composite video (CV) 1Vpp/75Ω on an RCA connector  1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors  1 S/PDIF (digital audio) on an RCA connector 1 audio ANALOG on a 3.5mm mini jack Video: 1V Audio: 2.5V Up to UXGA, up to 1080p Audio: 20Hz – [email protected] Audio: <–80dB Audio: Analog/analog: 0dB Analog/SPDIF: –12dBFS AC Audio: <0.01% 12V DC, 300mA Power Supply RK−2WP 19" rack adapter.