Transcript
F I LT E R T E C H N O L O G Y
w w w . f u h r - g m b h . c o m
[email protected]
acuraMeltflow PRO+
Meltblown High Performance Filter Element
acuraMeltflow PRO+ High Performance Filter Elements combine the advantages of conventional filter bags and filter cartridges in one filter element. The thermally bonded graded-density structure of this polypropylene depth cartridge is functioned with coarse fiber in inner layer and fine fiber in outer layer. This structure allows the retaining of dirt particles with different sizes. Similar to the filter bag, the filtration will be from the inside to the outside. While replacing the filter element, all dirt particles will retain inside the filter element and avoid a contamination of the clean side of the filter housing. The element can be installed in every standard bag filter housing without an additional support adaptor with the novel support collar acuraFlex PRO+. Optionally a magnet bar can be insert to increase the service life of the element.
Δp 20°C 2,4 bar
Δp 80°C 1,0 bar
Temperature
1 - 100 µm
max. 80°C
Filter area
sz.1 : ca. 0,10 m² sz.2 : ca. 0,25 m²
Filter matrix 25 mm
!
FUNCTIONAL PRINCIPLE
m
1
10
µm
µm
10
0µ
m
FLOW RATE
1µ
10
10
0µ
m
µm
Cage
PP matrix
acuraMeltflow
PRO+
NON-FILTRATE
Polypropylene
Micron rate
FILTRATE
Material
acuraMeltflow PRO+
!
TEChNICAL DATA
Functional principle:
High-Performance Filter Elements will be
flown from the inside to the outside. This deep filter matrix allows a high load capacity and long service life. The asymetric pore
structure ensures a optimal dirt load of particles with different sizes.
Subject to technical alterations. AL1097-00-E - page 1/2
acuraLine®
Fuhr Gmbh • Am Weinkastell 14 • D-55270 Klein-Winternheim • Tel. +49 (6136) 9943-0 • Fax +49 (6136) 9943-25
F I LT E R T E C H N O L O G Y
w w w . f u h r - g m b h . c o m
APPLICATIONS • • • • • •
Coating Pharmaceutical products Drinking water Cosmetics Process water Cleaning solutions
• • • • • •
[email protected]
Organic solvents Ink and paintings Petrochemistry Hydrocarbons Magnetic media dispersions Food and beverage
hANDLING AND FILTER REPLACEMENT
acuraMeltflow PRO+ High-Performance Filter Elements can be installed easily in every existing bag filter housings of size 1 and 2. The element can be installed without an additional support adaptor with the novel support collar acuraFlex PRO+ and guarantees a by-pass-free filtration. acuraMeltflow PRO+ HighPerformance Filter Elements will be flow from the inside through the outside. This will retain all the dirt particles inside of the filter element and avoid a contamination of the clean side of the filter housing. Optionally a magnet can be insert into the element. This innovative product is protected with an international design registration.
SET-UP FROM BAG TO acuraMeltflow PRO
+
remove standard filter bag
install acuraMeltflow PRO+
Optional: insert magnet bar
ORDERING INFORMATIONS FOR FILTER ELEMENTS acuraMeltflow PRO+ Bag size 1= size 1 2= size 2
Design type MF = acuraMeltflow PRO+
2-MFP-010
INSTALLATION NOTE If you are using a non-standardized bag filter housing (various manufacturers), please ask our technical staff whether you can use this High Performance Element without an additional length-adjustment adaptor. A length compensation adapter can easily be setup for the housing which differs from the standard.
Subject to technical alterations. AL1097-00-E - page 2/2
Micron rate
001 005 010 025 040 070 100
= 1 µm = 5 µm = 10 µm = 25 µm = 40 µm = 70 µm = 100 µm
Material P= Polypropylene
acuraLine®
ready!
PERFORMANCE • • • • • • • • •
High dirt load High flow rate Very large filter area Compact, space-saving design Easy and clean handling No contamination during replacing Low differential pressure By-pass free filtration Minimal set-up costs
Fuhr Gmbh • Am Weinkastell 14 • D-55270 Klein-Winternheim • Tel. +49 (6136) 9943-0 • Fax +49 (6136) 9943-25
