Transcript
AD-120ES Parts Manual 24 VAC Phase 5 1995-2001
American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 e-mail:
[email protected] www.amdry.com 120195 072997WL/tf
ADC Part No. 450160
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ___________________________ RESELLER’S NAME Serial Number(s)
AD-120ES
MODEL NO. __________________________________________
______________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents Control Door Assembly...................................................................................................................... 3 Control Door Assembly (Sprinkler Option) .......................................................................................... 4 Microprocessor Control Panel Assembly ............................................................................................. 5 Microprocessor Control Box Assembly ........................................................................................... 6, 7 Dual Timer Control Panel Assembly ................................................................................................ 8, 9 Dual Timer Control Box Assembly ............................................................................................... 10, 11 Front Panel/Main Door Assemblies For Models Mfd. as of August 31, 2000 .................................................................................. 12, 13 Front Panel/Main Door Assemblies For Models Mfd. prior to August 31, 2000 .............................................................................. 14, 15 Main Door Switch Assembly For Models Mfd. as of August 31, 2000 ........................................................................................ 16 Main Door Switch Assembly For Models Mfd. prior to August 31, 2000 .................................................................................... 17 Lint Drawer/Lint Drawer Switch Box Assemblies For Models Mfd. as of August 30, 1999 ........................................................................................ 18 Lint Drawer/Lint Drawer Switch Box Assemblies For Models Mfd. Between December 1, 1994 and August 30, 1999 ............................................... 19 Lint Door Assembly ......................................................................................................................... 20 Microprocessor Controller (Computer) Temperature Sensor Bracket Assembly ................................... 21 Dual Timer Temperature Sensor Bracket Assembly ....................................................................... 22, 23 Basket (Tumbler)/Support Assemblies ......................................................................................... 24, 25 Basket (Tumbler) Bearing Mount Assembly ................................................................................. 26, 27 Idler Bearing Mount Assembly .................................................................................................... 28, 29 Basket (Tumbler) Drive Motor Mount Assembly .......................................................................... 30, 31 Blower Motor Mount Assembly For Models Mfd. as of July 17, 2000 ............................................................................................ 32 Impellor/Fan Assembly For Models Mfd. prior to November 6, 2000 ................................................................................ 33 Blower Motor Mount Assembly For Gas Models Mfd. prior to November 6, 2000 ................................................................... 34, 35 Blower Motor Mount Assembly For Electric Models Mfd. prior to November 6, 2000 .............................................................. 36, 37 Blower Motor Mount Assembly For Steam Models Mfd. prior to November 6, 2000 ................................................................ 38, 39 Direct Spark Ignition (DSI) Burner Assembly For Gas Models Only ............................................................................................................ 40, 41
Direct Spark Ignition (DSI) Module Assembly For Gas Models Mfd. as of April 1, 2000 ...................................................................................... 42 Direct Spark Ignition (DSI) Module Assembly For Gas Models Mfd. prior to April 1, 2000 .................................................................................. 43 Electric Oven Assembly For Electric Models Only ....................................................................................................... 44, 45 Electric Oven Relay Box Assembly 208-240 VAC 3ø 50/60 Hz ......................................................................................................... 46 Electric Oven Relay Box Assembly 380-416/480 VAC 3ø 50/60 Hz ................................................................................................... 47 Sail Switch Assembly ....................................................................................................................... 48 Steam Damper Assembly For Steam Models Only ............................................................................................................... 49 Microprocessor Reversing Contactor Mounting Panel Assembly .......................................................... 50 Dual Timer Reversing Contactor Mounting Panel Assembly ................................................................. 51 Extended Back Guard Assembly ....................................................................................................... 52 Step Down Transformer Application Listing ....................................................................................... 53 Electric Oven Component Application Listing For Electric Models Only ............................................................................................................. 54 Electric Oven Power Distribution 72 kW 208-240 VAC 3ø 50/60 Hz............................................................................................... 55 Electric Oven Power Distribution 72 kW 380-416/480 VAC 3ø 50/60 Hz ........................................................................................ 56 Electric Oven Power Distribution 80 kW 208-240 VAC 3ø 50/60 Hz............................................................................................... 57 Electric Oven Power Distribution 80 kW 380-416/480 VAC 3ø 50/60 Hz ........................................................................................ 58 Electric Oven Wiring 72/80 kW 208-240 VAC 3ø 50/60 Hz.......................................................................................... 59 Electric Oven Wiring 72/80 kW 380-416/480 VAC 3ø 50/60 Hz ................................................................................... 60 Sprinkler Pneumatic Assembly .......................................................................................................... 61 Sprinkler Panel Assembly ........................................................................................................... 62, 63 Sprinkler Pipe Assembly............................................................................................................. 64, 65 Relay Panel (Sprinkler Option) ................................................................................................... 66, 67 Temperature Sensor Assembly for Sprinkler ................................................................................... 68 Back Guard Assembly ..................................................................................................................... 69 Additional Parts Available ................................................................................................................. 70
Control Door Assembly
Illus. No.
Part No.
Qty.
1
820004*
1
820003
1
820006*
1
820009
1
160005 112360 870011 150309 102600 102601 102505
2 1 1 9 1 1 1
2 3 4 5 6 7 *
3
Description Control Door Assembly ONLY (for gas models and electric models Only) Stainless Steel Control Door Assembly ONLY (for gas models and electric models Only) Short Control Door ONLY (for steam models Only) Stainless Steel Control Door Assembly ONLY (for steam models Only) Spring Turn Latch (2-piece) ADC Logo ONLY Logo Double Tape Kit #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Support Rod Catch Control Door Retainer Clip Control Door Support Rod
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Control Door Assembly (Sprinkler Option)
Illus No.
Part No.
Qty.
1 2 3
881314 160005 112360 870011 150415 102600 102601 102505 123211 122420 123200 132388 132387
1 2 1 1 9 1 1 1 1 1 1 1 1
4 5 6 7 8 9 10 11 12
American Dryer Corporation
Description Control Door Assembly ONLY Spring Turn Latch (2-piece) ADC Logo ONLY Double Tape Kit #10-16 x 1/2” Phillips Round Head Crimptite Screw Control Door Support Rod Catch Control Door Rod Retainer Clip Control Door Support Rod 120V Panel Light Bulb Engraved Label “Sprinkler Stop” Amber Lighted Push-Button Operator Normally Opened (N.O.) Contact Block with Direct Supply Base Normally Closed (N.C.) Contact Block
88 Currant Road / Fall River, MA 02720-4781
5
Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535 112276 112275 112277 112278
1 1 1 1 1
2
880836 801260
1 1
801215
1
801214
1
137231 824998 153010 150005 150309 136048
1 1 2 2 1 1
3 4 5 6 7 *
Description Non-Coin English Keyboard Label Assembly Non-Coin Stick-On Label (English Only)* 3-Language Non-Coin Stick-On Label (Spanish, Italian, and Hebrew)* 3-Language Non-Coin Stick-On Label (English, Spanish, and Hebrew)* 5-Language Non-Coin Stick-On Label (Italian, Dutch, French, German, and Chinese)* Microprocessor Controller (computer) Control Panel ONLY Microprocessor Controller (computer) Control Panel ONLY with Battery Bracket Microprocessor Controller (computer) Control Panel Assembly Complete (includes illus. nos. 1 through 5 and 7) Microprocessor Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5 and 7) Phase 5 Non-Coin Reversing Microprocessor Controller (computer) ONLY Phase 5 Battery Clip ONLY #6 Star Washer #6-32 x 3/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-amp Slo-Blo Fuse ONLY
Not illustrated.
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). Telephone: (508) 678-9000
Fax: (508) 678-9447
6
American Dryer Corporation
Microprocessor Control Box Assembly
88 Currant Road / Fall River, MA 02720-4781
7
Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8
150100 141403 151001 150002 120715 151000 150102 136057 182453 136008 150413 131932 150413 121010 122631 122705 122704 122630 122625 137025 122704 122705 122626 122706 122641 122800 122801
2 1 2 2 1 2 2 or 3 2 2 or 3 2 or 3 2 1 1 1 1 * * 1 1 1 12 12 1 11 1 1 1
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 ----*
Description #8-32 x 1/2” Round Head Machine Screw 24 VAC Transformer - 50/60 Hz (for gas and steam models Only) #8-23 Pal Nut #6-32 x 1” Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut #8 x 3/8” Phillips Round Head TEK Screw 1/8-amp Slo-Blo Fuse ONLY 6-amp (fast acting) Fuse (for electric models Only) Fuse Block/Strip ONLY #10-16 x 1/2” TORX Crimptite Screw 24 VAC Relay (for electric models Only) #10-16 x 1/2” TORX Crimptite Screw L-70 Ground Lug 6-Pin Connector ONLY Socket Terminal ONLY Pin Terminal ONLY 6-Pin Connector ONLY 15-Pin Connector ONLY 15-Position Strain Relief, Not Illustrated Pin Terminal ONLY Socket Terminal ONLY 15-Pin Socket Connector ONLY Microprocessor Socket ONLY 15-Pin Microprocessor Connector ONLY Microprocessor (female) Pin Extraction Tool, Not Illustrated Pin/Socket Extraction Tool, Not Illustrated
As required (either 2 or 3).
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Dual Timer Control Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Dual Timer Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
123005 122400 880838
1 1 1
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ---
880837 131917 150207 154001 152000 153010 120730 153565 150110 153560 131931 151000 112050 150309 124103 124025 124030 122602 122700 122801
1 1 2 2 2 2 1 2 4 2 1 1 1 1 2 1 1 1 7 1
Telephone: (508) 678-9000
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 15 and 17 through 21) Dual Timer Control Panel ONLY Push To Start Relay - 24 VAC #10-24 x 1/2” Phillips Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #6-32 x 1” Clinch Stud #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Clinch Stud Dual Timer Relay - 24 VAC #10-16 x 1/2” Pal Nut Dual Timer Label ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Arrow Timer Knob 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool, Not Illustrated
Fax: (508) 678-9447
10
American Dryer Corporation
Dual Timer Control Box Assembly
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1 2
122603 122701 122801 315010 150300 150100 141403 151001 150002 120715 151000 150102 136057 182453 136008 150413 131932 150413 121010 122631 122705 122704 122630 137025 122625 122704 122705 122626 122801
1 7 1 1 2 2 1 2 2 1 2 2 or 3 2 1 2 or 3 2 1 1 1 1 * * 1 1 1 12 12 1 1
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 --*
11
Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool, Not Illustrated 9-Pin Connector Bracket #10-16 x 1/2” Hex Washer TEK Screw # 8-32 x 1/2” Phillips Round Head Machine Screw 24 VAC Transformer - 50/60 Hz (for gas models and steam models Only) #8-23 Pal Nut #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut #8 x 3/8” Phillips Round Head TEK Screw 1/2-amp Slo-Blo Fuse ONLY 6-amp (fast acting) Fuse (for electric models Only) Fuse Block/Strip ONLY #10-16 x 1/2” TORX Crimptite Screw 24 VAC Relay (for electric models Only) #10-16 x 1/2” TORX Crimptite Screw L-70 Ground Lug 6-Pin Connector ONLY Socket Terminal ONLY Pin Terminal ONLY 6-Pin Connector ONLY 6/15-Position Strain Relief, Not Illustrated 15-Pin Connector ONLY Pin Terminal ONLY Socket Terminal ONLY 15-Pin Socket Connector ONLY Pin/Socket Extraction Tool, Not Illustrated
As required (either 2 or 3).
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
Front Panel/Main Door Assemblies For Models Mfd. as of August 31, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
13
Front Panel/Main Door Assemblies For Models Mfd. as of August 31, 2000
Illus. No. 1 2 3 4 5
*
Part No.
Qty.
6 7 8 9
883081 150683 151012 883082 102214 170730 152014 150120 151010 883083
1 4 1 1 1 1 6 1 1 1
10 11* 12 13 14 15 16
883080 882411 825195 170330 154215 102360 154270 150685
1 1 1 1 2 2 2 1
Description Door Hinge (black) 1/4-20 x 5/8” Carriage Bolt #10-32 Acorn Nut (white) Main Door Handle (black) 30” Door Glass Door Glass Adhesive (10.3 oz. cartridge) 1/4-20 Free Spin Wash Nut Main Door Latch Screw (#10-32 dome hex head screw) #10-32 Acorn Nut Main Door Assembly Complete (black) (includes illus. nos. 2 through 10) Main Door Ring (black) Extruded Steel Door Gasket Front Panel Assembly (white) Friction Door Latch 5/32” Pop Rivet 0.0625 x 0.125 Gasket (black) 1” Spacer 1/4-20 x 1-3/4” Carriage Bolt
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Front Panel/Main Door Assemblies For Models Mfd. prior to August 31, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Front Panel/Main Door Assemblies For Models Mfd. prior to August 31, 2000
Illus. No.
Part No.
Qty.
1
820012*
1
820014
1
150309 150412 170340 154200 102308 102210 170730 150401 306801 102102 150430 180150 800127*
15 12 3 6 1 1 1 3 9 6 9 1 1
800128
1
800122*
1
800123
1
150430 180155
10 1
2 3 4 5 6 7 8 9 10 11 12 13
14 15 *
Description Right Hand Front Panel Assembly (includes illus. nos. 1, 4, and 5) Stainless Steel Right Hand Front Panel Assembly (includes illus. nos. 1, 4, and 5) #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 3/4” Phillips Round Head Crimptite Screw 3-1/2” Stainless Steel Striker Pad 5/32” Pop Rivet Door Gasket ONLY (94” length) 20-7/16” Door Glass ONLY Glass Adhesive (10.3 oz. cartridge) #10-24 x 1-1/4” Phillips Taptite Screw Magnet Keeper ONLY 1” x 3/4” x 0.197” Main Door Magnet ONLY #10 x 1/2” Phillips Pan Head Self-Tapping Machine Screw 35” Granite Main Door Handle ONLY Main Door Assembly Complete with Gray Cross Handle (includes illus. nos. 6 through 13) Stainless Steel Main Door Assembly Complete with Gray Cross Handle (includes illus. nos. 6 through 13) Main Door Assembly with Glass and Gasket ONLY (includes illus. nos. 6, 7, and 13) Stainless Steel Main Door Assembly with Glass and Gasket ONLY (includes illus. nos. 6, 7, and 13) #10 x 1/2” Phillips Pan Head Self-Tapping Machine Screw 35” Cross Main Door Hinge Block ONLY (gray)
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Main Door Switch Assembly For Models Mfd. as of August 31, 2000
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
150006 152013 153010 137005 150445 881687 881695 881702
2 2 2 1 4 1 1 1
881700
1
150443 881441 881735 881440 881736 153031
2 1 1 1 1 1
7 8 9 10
American Dryer Corporation
Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch 1/4-20 x 3/4” Socket Head Cap Screw Main Door Switch Housing ONLY (white) Main Door Switch Housing ONLY (blue) Main Door Switch with Housing Assembly (white) (includes illus. nos. 1 through 4 and 6) Main Door Switch with Housing Assembly (blue) (includes illus. nos. 1 through 4 and 6) 1/4-20 x 3/4” Stainless Steel Cap Screw Bottom Hinge Block (white) Bottom Hinge Block (blue) Top Hinge Block (white) Top Hinge Block (blue) Nylon Washer
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
17
For Models Mfd. prior to August 31, 2000
Illus. No.
Part No.
Qty.
1
821098
1
2 3 4 5 6 7 8
821097 102405 150415 102405 137005 121028 180155 122705 122626
1 1 2 1 1 2 1 2 1
Telephone: (508) 678-9000
Description Main Door Switch Assembly Complete (includes illus. nos. 1 through 4 and 6) Main Door Switch Bracket Assembly ONLY Main Door Switch Actuator ONLY #10-16 x 1/2” Phillips Round Head Crimptite Screw Main Door Switch Actuator Main Door Switch ONLY 1/4” x 0.032 Insulated Terminal ONLY 35” Cross Door Hinge Block ONLY (gray) Socket Mate to Split Pin 15-Pin Cap Housing ONLY (M/L)
Fax: (508) 678-9447
18
Lint Drawer/Lint Drawer Switch Box Assemblies For Models Mfd. as of August 30, 1999
Illus. No.
Part No.
Qty.
1
5
802106 802125 122116 122605 122701 122801 882507
1 1 1 1 2 1 1
6 7 8 9 10 11 12
150301 122700 122604 150301 319076 319077 150301
4 2 1 2 1 1 14
2 3 4
American Dryer Corporation
Description Lint Basket Assembly Stainless Steel Lint Basket Assembly Lint Drawer Switch ONLY 4-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool, Not Illustrated Lint Drawer Switch Box Assembly Complete (includes illus. nos. 3 through 6) For Models Mfd. as of August 30, 1999 #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector #8-18 x 7/16” Phillips Pan Head TEK Screw Right Hand Divider Panel Left Hand Divider Panel #8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
19
Lint Drawer/Lint Drawer Switch Box Assemblies For Models Mfd. Between December 1, 1994 and August 30, 1999
Illus. No.
Part No.
Qty.
1
881141* 881173 820017 153562 136992 153010 152000 122605 122701 122801 821119
1 1 1 2 1 2 2 2 4 1 1
821116
1
150415
2
2 3 4 5 6 7 8 9
10 *
Description Lint Drawer Assembly with Safety Switch Actuator Complete Stainless Steel Lint Drawer Assembly with Safety Switch Actuator Lint Screen Assembly ONLY #6-32 x 3/4” Clinch Stud Lint Drawer Switch ONLY #6 Star Washer #6-32 Hex Nut 4-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool, Not Illustrated Lint Drawer Switch Assembly Complete (includes illus. nos. 3 and 9) For Models Mfd. prior to August 30, 1999 Lint Drawer Switch Mounting Bracket Assembly ONLY (includes illus. nos. 3 and 9) #10-16 x 1/2” Phillips Round Head Crimptite Screw
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Lint Door Assembly
Illus. No.
Part No.
Qty.
1
824256*
1
820015*
1
820021 117602 150309 117604
1 5 5 8
2 3 4 *
Description Lint Door Assembly (includes illus. nos. 1, 2, and 4) For Models Mfd. as of August 30, 1999 Lint Drawer Assembly (includes illus. nos. 1, 2, and 4) For Models Mfd. Between December 1, 1994 and August 30, 1999 Stainless Steel Lint Door Assembly Gasket (sold by the foot) #10-16 x 1/2” Hex Head TEK Crimptite Screw Neoprene Sponge Tape (sold by the foot)
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Microprocessor Controller (Computer) Temperature Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
820022
1
2 3
331295 154007 880251
1 2 1
152000 153010 130302 150000 121028 122605 122701 122604 122700 122801 150301
2 2 1 2 2 1 4 1 4 1 2
4 5 6 7 8 9 10 11 12 13
Telephone: (508) 678-9000
21
Description Microprocessor Controller (computer) Temperature Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Temperature Sensor Bracket ONLY 1/4” Tinnerman Push On Fastener 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 2, 3, 8, 9, and 10) #6-32 Hex Nut #6 Star Washer 225° Large Automatic Reset Thermostat ONLY #6-32 x 1/4” Round Head Machine Screw Insulated Terminal 4-Pin Socket Connector ONLY Socket Terminal ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool, Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
22
American Dryer Corporation
Dual Timer Temperature Sensor Bracket Assembly
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Temperature Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
801404
1
2 3 4 5 6 7 8 9 10
331295 152000 153010 130302 130107 130109 130101 150001 121028 122605 840062
1 5 5 1 1 1 1 5 8 1 1
122701 122604 122700 122801 150301 840065
4 1 4 1 2 1
11 12 13 14 15
Telephone: (508) 678-9000
23
Description Dual Timer Sensor Bracket Assembly Complete (includes illus. nos. 1 through 11 and 15) Sensor Bracket ONLY #6-32 Hex Nut #6 Star Washer 225° Large Thermostat ONLY 160° Large Thermostat ONLY 140° Large Thermostat ONLY 180° Large Thermostat ONLY #6-32 x 1/2” Phillips Round Head Machine Screw Insulated Terminal 4-Pin Socket (female) Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 9 through 11) Socket Terminal ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool, Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw Sensor Jumper Harness ONLY
Fax: (508) 678-9447
24
American Dryer Corporation
Basket (Tumbler)/Support Assemblies
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
1
820110* 820111* 820020
1 1 1
820052
1
820030
1
820029
1
150413 331105 331106 150500 100910 301700 301701 820115 820116 152011 153026 153011 116006 401010 821002
40 4 4 1 8 4 ** 1 1 8 8 8 1 1 1
2 3 4 5 6 7 8 9 10 11 12 13
25
Description Basket (tumbler) ONLY without Felt Collar Stainless Steel Basket (tumbler) ONLY without Felt Collar Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 12) Basket (tumbler) and Support Assembly Complete with Rotational Sensor Option (includes illus. nos. 1 through 12) Stainless Steel Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 12) Stainless Steel Basket (tumbler) and Support Assembly Complete with Rotational Sensor Option (includes illus. nos. 1 through 12) #10-16 x 1/2” TORX Crimptite Screw Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/4” Socket Button Head Screw 1/2-13 x 44” Tie Rod Basket (tumbler) Reinforcing Plate ONLY Basket (tumbler) Shim ONLY Basket (tumbler) Support ONLY Basket (tumbler) Support ONLY with Rotational Sensor Option 1/2-13 Hex Nut 1/2” Lock Washer 9/16” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5 oz. tube) Rotational Magnet Holder Assembly (for microprocessor models with optional rotational sensor)
* Felt collar is not included and must be ordered separately. ** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
American Dryer Corporation
Basket (Tumbler) Bearing Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Mount Assembly
Illus. No.
*
Part No.
Qty.
1 2* 3 4 5 6 7 8 9 10 11 12
101137 100135 101136 150602 153016 880204 153016 153015 152010 150600 152005 801102
1 2 1 4 4 1 4 4 4 2 2 1
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
880204 150603 152011 152005 153005 153004 150600 153004 100801 301810 100811 153018 153007 150512 824807 880841
1 2 2 2 2 4 2 2 2 1 2 2 2 2 1 1
27
Description 2-1/4” SFX Bushing AP-74 V-Belt 20” Basket (tumbler) Pulley 5/8-11 x 3” Hex Head Machine Bolt 5/8” Flat Washer 2-1/4” Pillow Block Bearing ONLY 5/8” Flat Washer 5/8” Lock Washer 5/8-11 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8-16 Hex Nut Basket (tumbler) Bearing Mount Assembly (includes illus. nos. 4 through 13) 2-1/4” Pillow Block Bearing ONLY 1/2-13 x 3” Square Head Machine Bolt 1/2-13 Hex Nut 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 5/8” Retaining Ring 5/8” Hinge Pin 2-1/4” Retaining Ring 1/4” Flat Washer 1/4” Lock Washer 1/4-20 x 1/2” Hex Head Machine Bolt Rotational Sensor Assembly Rotational Sensor Mounting Bracket
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
American Dryer Corporation
Idler Bearing Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Mount Assembly
Illus. No.
*
Part No.
Qty.
1 2 3* 4 5* 6 7 8 9 10 11 12 13 14 15 16 17
101110 101113 100135 101107 100170 101112 100715 301852 880205 153004 150600 150512 150509 153001 152004 153002 801001
1 1 1 1 1 1 1 1 1 4 4 6 2 4 6 8 1
18 19 20 21 22 23 24
311401 880205 153004 153005 152005 103005 153007 152002
1 1 4 4 4 1 6 6
29
Description 1” Bushing 2A3.0 Pulley AP-74 V-Belt 1” SK Bushing 3V-710 V-Belt 19” Idler Pulley 1/4” x 1/4” x 4-5/8” Key 1” Idler Shaft ONLY 1” Pillow Block Bearing ONLY 3/8” Flat Washer 3/8-16 x 1-1/2” Hex Head Machine Bolt 1/4-20 x 1/2” Hex Head Machine Bolt 5/16-18 x 3” Hex Head Machine Bolt 5/16” Flat Washer 5/16” Hex Nut 5/16” Lock Washer Idler Bearing Mount Assembly Complete (includes illus. nos. 8 through 11 and 17 through 24) Idler Bearing Mount ONLY 1” Pillow Block Bearing ONLY 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut Idler Adjustment Hinge ONLY 1/4” Lock Washer 1/4-20 Hex Nut
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
American Dryer Corporation
Basket (Tumbler) Drive Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Drive Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2
101121 101114 101120 100170 120200 150501 153001 100029
1 1 1 1 1 4 4 1
100084
1
800952 800953**
1 1
800955**
1
800956**
1
152004 153002 153001 152004 153002 153001 150619 152005
4 4 4 4 4 4 1 2
3* 4 5 6 7
8
9 10 11 12 13 14 15 16
31
Description 5/8” SK Bushing 2.65” Pulley (for 60 Hz models Only) 3.15” Pulley (for 50 Hz models Only) 3V-710 V-Belt 3/8” x 90° Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Flat Washer 3/4 hp 208/230/460v 3ø 50/60 Hz and 380v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 3/4 hp 380v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Basket (tumbler) Motor Mount ONLY (56Z frame) 3/4 hp 208/230/460v 3ø 60 Hz Basket (tumbler) Motor Mount Assembly Complete (includes illus. nos. 1, 2, 4 through 11, 15, and 16) 3/4 hp 208/230/380/460v 3ø 50 Hz Basket (tumbler) Motor Mount Assembly Complete (includes illus. nos. 1, 2, 4 through 11, 15, and 16) 3/4 hp 380v 3ø 60 Hz Basket (tumbler) Motor Mount Assembly Complete (includes illus. nos. 1, 2, 4 through 11, 15, and 16) 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer 3/8-16 x 3” Hex Head Machine Bolt 3/8-16 Hex Nut
* Replace in matched sets (both belts). ** Specify voltage when ordering.
IMPORTANT: For voltages higher than 460 VAC, contact the ADC factory for correct part number of motor mount assembly.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
Blower Motor Mount Assembly For Models Mfd. as of July 17, 2000
Illus. No.
Part No.
Qty.
1 2 3
150501 153001 181043 100022 100088 152004 153002 153001 117604 153001 153002 152004 803561 153055 802027 802024 100705 153055 152006
4 4 1 1 1 4 4 4 4’ 4 4 4 1 1 1 1 1 1 2
4 5 6 7 8 9 10 11 12 13 14 15 16
American Dryer Corporation
Description 5/16-18 x 1” Hex Head Bolt 5/16” Flat Washer 3 hp Motor 208/230/460/416v 50 Hz 3 hp Motor 380v 3ø 60 Hz 3 hp Motor 575v 3ø 60 Hz 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut Blower Motor Mount 5/8” Motor Washer 16” Riveted High Flow Impellor 7/8” Bore (60 Hz dryers) 16” Riveted Impellor 7/8” Bore (50 Hz dryers) 3/16” x 3/16” x 1-3/8” Key 5/8” Motor Washer 1/2-20 Left Hand Jam Nut
88 Currant Road / Fall River, MA 02720-4781
33
Impellor/Fan Assembly For Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
101194 101152 101147 101148 100706 100811 317400 880879 154326 170512 153004 153005 150601 813002 813023
1 1 1 1 1 2 1 2 4 2 4 4 4 1 1
813024
1
152005 153005 153004 117604 100603 100714 153065
8 8 8 4 1 1 1
153050
1
152006
2
2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17
18
Telephone: (508) 678-9000
Description SDS x 1-3/8” Bushing (for 60 Hz models Only) SH x 1-3/8” Bushing (for 50 Hz models Only) 2B x 4.8 Pulley (for 60 Hz models Only) 2B x 4.0 Pulley (for 50 Hz models Only) 5/16” x 5/16” x 1-3/8” Key Retaining Ring Impellor Shaft 1-3/8” Pillow Block Bearing with Setscrews and Grease Fitting 5/16 x 3/8” Allen Setscrew ONLY 1/4-28 N.P.T. Grease Fitting ONLY 3/8” Flat Washer 3/8” Lock Washer 3/8-16 x 2” Hex Head Machine Bolt Impellor Shaft Mount ONLY Impellor Assembly Complete (for 60 Hz models Only) (includes illus. nos. 1 through 9 and 13 through 17) Impellor Assembly Complete (for 50 Hz models Only) (includes illus. nos. 1 through 9 and 13 through 17) 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Neoprene Sponge Tape (sold by the foot) 16” Impellor with 3/4” Bore 3/16” x 3/16” x 1-7/8” Key 1/2” x 1-1/2” Flat Washer (for models mfd. as of May 19, 1998) 1/2” x 1-1/16” Flat Washer (for models mfd. prior to May 19, 1998) 1/2-20 Left Hand Jam Nut
Fax: (508) 678-9447
34
Blower Motor Mount Assembly For Gas Models Mfd. prior to November 6, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
35
Blower Motor Mount Assembly For Gas Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
802253
1
802229
1
813025
1
813049
1
152034 152005 802232 153001 153002 150501 152004 882078
2 4 1 11 11 7 4 1
100043
1
100081
1
100169 101135 101138 100706
1 1 1 1
2 3 4 5 6 7 8 9
10* 11 12 13 *
Description Adjustable Plate Assembly (for models mfd. as of July 20, 1998) Adjustable Plate Assembly (for models mfd. prior to July 20, 1998) Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380 Volt/60 Hz Models ONLY 3/8-16 x 3-1/2” Hex Head Bolt 3/8-16 Hex Nut Adjustable Angle Assembly 5/16” Flat Washer 5/16” Lock Washer 5/16-18 x 3/4” Hex Head Machine Bolt 5/16-18 Hex Nut 3 hp Blower Motor with Adjusting Plate (for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only) 3 hp Blower Motor (for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only) For Models Mfd. as of January 7, 1999 3 hp Blower Motor (for 380 volt/60 Hz models Only) For Models Mfd. prior to January 7, 1999 5L-350 V-Belt 2B x 5.4 Motor Pulley SDS x 1-1/8” Bore Bushing 5/16” x 5/16” x 1-3/8” Key
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
Blower Motor Mount Assembly For Electric Models Mfd. prior to November 6, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
37
Blower Motor Mount Assembly For Electric Models Mfd. prior to November 6, 2000 Illus. No.
Part No.
Qty.
1
802253
1
802229
1
813028
1
813052
1
813025
1
813049
1
813070
1
813027
1
813051
1
152034 152005 802232 153001 153002 150501 152004 882078
2 4 1 11 11 7 4 1
100043
1
100081
1
100156 100169 100168 101147 101135 101185 101138 100706
1 1 1 1 1 1 1 1
2 3 4 5 6 7 8 9
10* 11 12 13
Telephone: (508) 678-9000
Description Adjustable Plate Assembly (for models mfd. as of July 20, 1998) Adjustable Plate Assembly (for models mfd. prior to July 20, 1998) 60 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY 60 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380 Volt/60 Hz ONLY 72 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY 72 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380 Volt/60 Hz Models ONLY 80 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 208-230/460 Volt - 60 Hz and 380-416 Volt - 50 Hz Models ONLY (for models mfd. as of November 2, 1998) 80 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY (for models mfd. prior to November 2, 1998) 80 kW Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380 Volt/60 Hz Models ONLY 3/8-16 x 3-1/2” Hex Head Machine Bolt 3/8-16 Hex Nut Adjustable Angle Assembly 5/16” Flat Washer 5/16” Lock Washer 5/16-18 x 3/4” Hex Head Machine Bolt 5/16-18 Hex Nut 3 hp Blower Motor with Adjusting Plate (for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only) 3 hp Blower Motor (for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only) For Models Mfd. as of January 7, 1999 3 hp Blower Motor (for 380 volt/60 Hz models Only) For Models Mfd. prior to January 7, 1999 5L-330 V-Belt (for 60 kW electric oven models Only) 5L-350 V-Belt (for 72 kW electric oven models Only) 5L-360 V-Belt (for 80 kW electric oven models Only) 2B x 4.8 Motor Bushing (for 60 kW electric oven models Only) 2B x 5.4 Motor Bushing (for 72 kW electric oven models Only) 2B x 6.2 Motor Bushing (for 80 kW electric oven models Only) SDS x 1-1/8” Bore Bushing 5/16” x 5/16” x 1-3/8” Key
Fax: (508) 678-9447
38
Blower Motor Mount Assembly For Steam Models Mfd. prior to November 6, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Blower Motor Mount Assembly For Steam Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
802253
1
802229
1
813069
1
813026
1
813069
1
813050
1
152034 152005 802232 153001 153002 150501 152004 882078
2 4 1 11 11 7 4 1
100043
1
100081
1
100168 101185 101138 100706
1 1 1 1
2 3 4 5 6 7 8 9
10* 11 12 13 *
Description Adjustable Plate Assembly (for models mfd. as of July 20, 1998) Adjustable Plate Assembly (for models mfd. prior to July 20, 1998) Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380-416 Volt/50 Hz Models ONLY (for models mfd. as of November 2, 1998) Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY (for models mfd. as of November 2, 1998) Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380-416 Volt/50 Hz Models ONLY (for models mfd. as of January 7, 1999) Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 13) For 380 Volt/60 Hz Models ONLY (for models mfd. prior to January 7, 1999) 3/8-16 x 3-1/2” Hex Head Bolt 3/8-16 Hex Nut Adjustable Angle Assembly 5/16” Flat Washer 5/16” Lock Washer 5/16-18 x 3/4” Hex Head Machine Bolt 5/16-18 Hex Nut 3 hp Blower Motor with Adjusting Plate (for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only) 3 hp Blower Motor (for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only) For Models Mfd. as of January 7, 1999 3 hp Blower Motor (for 380 volt/60 Hz models Only) For Models Mfd. prior to January 7, 1999 5L-360 V-Belt 2B x 6.2 Motor Bushing SDS x 1-1/8” Bore Bushing 5/16” x 5/16” x 1-3/8” Key
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Direct Spark Ignition (DSI) Burner Assembly For Gas Models ONLY
Illus. No.
Part No.
Qty.
1
880874*
1
880875*
1
2 3 4 5 6 7 8 9 10 11 12 13
820201 331291 150309 142813 141300 142701 142601 142710 142504 142734 150413 331291 140026
1 1 2 1 1 1 1 1 1 1 2 1 1
14 15 16
140411 150309 331291 141208
2 1 1
American Dryer Corporation
Description Direct Spark Ignition (DSI) Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 16 and 18 through 36) Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 16 and 18 through 38) Burner Box ONLY Pipe Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw 3/4” x 32-1/2” Pipe 3/4” Union Shut-off 3/4” Closed Nipple 3/4” Union 3/4” x 4” Nipple 3/4” x 90° Elbow 3/4” x 5 1/2” Nipple #10-16 x 1/2” TORX Crimptite Screw Gas Valve Pipe Bracket 3/4” Direct Spark Ignition (DSI) 24 VAC Redundant (natural gas) Gas Valve (3/4” to 1/2” reducing bushing included with gas valve) 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit #10-16 x 1/2” Hex Head TEK Crimptite Screw Gas Valve Pipe Bracket 3-Port Manifold
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly (continued)
41
For Gas Models ONLY
Illus. No. 17** 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
35 36 37*** 38*** --* ** *** ****
Part No.
Qty.
140832 140819 150309 331288 150309 141110 150309 331287 150309 150309 ---------
3 3 4 1 6 3 2 1 2 6 1
331289 150413 331290 880325 305410 880330 150413 151000 130201****
1 1 1 1 1 1 2 2 1
130401
1
150001 142924 142937 332256 150309 880886**
2 1 1 1 5 1
Description #4 Burner Orifice (natural gas) ONLY #30 Burner Orifice (liquid propane [L.P.] gas) ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Manifold Support ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Burner Tube ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Burner Tube Support ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch (refer to Sail Switch Assembly on page 48) Burner Box Cover Plate ONLY #10-16 x 1/2” Phillips Round Head Screw Ignitor/Flame-Probe Sight Hole Disc ONLY PSE Ignitor Assembly Kit Direct Spark Ignition (DSI) Ignitor Gap Feeler Gauge, Not Illustrated Direct Spark Ignition (DSI) Ignitor High Voltage (HV) Wire/Connector ONLY #10-16 x 1/2” Phillips Round Head Screw #6-32 Pal Nut 330° Hi-Limit Small Manual Reset Thermostat ONLY (for models mfd. as of May 26, 1998) 330° Hi-Limit Thermostat ONLY (for models mfd. prior to May 26, 1998) #6-32 x 1/2” Round Head Machine Screw 1” to 3/4” Reducing Coupling 1” BSPT x 3/4” N.P.T. Coupling (for CE models Only) Liquid Propane (L.P.) Burner Baffle ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit (with 3/4” White-Rodgers gas valve)
Orifices are not included and must be ordered separately. Consult factory for elevations over 2,000 feet. For liquid propane (L.P.) gas models ONLY. ADC Part No. 130201 (330° Hi-Limit Small Manual Reset Thermostat) can and should be used in place of ADC Part No. 132401 (330° Hi-Limit Thermostat).
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
Direct Spark Ignition (DSI) Module Assembly For Gas Models Mfd. as of April 1, 2000
Illus. No.
Part No.
Qty.
1
128935
1
2 3 4 5 6 7 8
820100 121400 150522 150301 153010 152000 120102
1 2 3 1 4 4 2
American Dryer Corporation
Description Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz (for models mfd. as of April 1, 2000) Direct Spark Ignition (DSI) Module Mount Assembly ONLY Universal Bushing 1/4-20 x 1/2” Hex Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw #6 Star Washer #6-32 Hex Nut 3/8” Straight x 1/2” Knock-Out Connector
88 Currant Road / Fall River, MA 02720-4781
43
Direct Spark Ignition (DSI) Module Assembly For Gas Models Mfd. prior to April 1, 2000
Illus. No. 1 2 3 4 5 6 7
Part No. 880815 820100 121400 152014 150301 153010 152000
Qty. 1 1 3 3 1 4 4
Telephone: (508) 678-9000
Description ADC Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz Direct Spark Ignition (DSI) Module Mount Assembly ONLY Universal Bushing 1/3-20 Free Spin Wash Nut #8-18 x 7/16” Phillips Pan Head TEK Screw #6 Star Washer #6-32 Hex Nut
Fax: (508) 678-9447
44
Electric Oven Assembly For Electric Models ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly
45
For Electric Models ONLY
Illus. No.
Part No.
Qty.
1
803015
1
803002
1
2 3 4 5 6 7
---------* ---------* 802802 150301 130400 150309 802800 802801
1 18 1 2 1 4 1 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
154004 150309 802799 122200 150303 105500 319202 154002 150413 803101 120081 120080 152008 121011* 121010* 153009 152008 150413 320823
1 2 1 1 2 1 1 1 8 4 36 36 36 ----36 36 14 1
321400
1
---------*
-
27 *
Description Electric Oven Box ONLY (for models mfd. as of December 8, 1997) Electric Oven Box ONLY (for models mfd. prior to December 8, 1997) Electric Oven Assembly Complete Electric Element Safety Control Bracket ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 290° Hi-Limit ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 7 through 15) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” TORX Crimptite Screw Element Cover ONLY Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut Bus Bar (sold by the foot) Terminal Lug #10 Star Washer #10-32 Hex Nut #10-16 x 1/2” TORX Crimptite Screw Electric Wire Burner Cover ONLY (for models mfd. as of December 8, 1997) Electric Wire Burner Cover ONLY (for models mfd. prior to December 8, 1997) Oven Wire (sold by the foot)
Refer to Electric Oven Component Application Listing on page 54.
Telephone: (508) 678-9000
Fax: (508) 678-9447
46
Electric Oven Relay Box Assembly 208-240 VAC 3ø 50/60 Hz
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
320902 150301 120710 151001 121400 132004
1 12 1 2 2 1
7 8 9 10 11 12 13 14 15
150108 121010 151001 150108 131385 151001 150521 120706 152014
3 1 1 1 2 3 2 1 2
American Dryer Corporation
Description Electric Oven Relay Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Power Distribution Block #8-32 Pal Nut Universal Bushing Transformer (for ALL microprocessor controller [computer] models and timer models) #8-32 x 1/2” Pan Head Machine Screw L-70 Terminal Lug #8-32 Pal Nut #8-32 x 1/2” Pan Head Machine Screw Single-Pole Single Throw 112-amp - 24 VAC Relay #8-32 Pal Nut 1/4-20 x 2” Carriage Bolt Power Distribution Block 1/4-20 Free Spin Wash Nut
88 Currant Road / Fall River, MA 02720-4781
47
Electric Oven Relay Box Assembly 380-416/480 VAC 3ø 50/60 Hz
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Part No.
Qty.
320902 150301 150300 132004 121400 150108 121010 151001 151001 152014 150108 131385 120706 150501
1 12 3 1 2 3 1 1 3 2 1 1 1 2
Telephone: (508) 678-9000
Description Electric Oven Relay Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Transformer (for ALL electric models - 380 VAC through 480 VAC) Universal Bushing #8-32 x 1/2” Pan Head Machine Screw L-70 Terminal Lug #8-32 Pal Nut #8-32 Pal Nut 1/4-20 Free Spin Wash Nut #8-32 x 1/2” Pan Head Machine Screw Single-Pole Single Throw 112-amp - 24 VAC Relay Power Distribution Block 1/4-20 x 2” Carriage Bolt
Fax: (508) 678-9447
48
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1 2 3 4
105500 319202 154002 802800 802801
1 1 1 1 1
5 6 7 8 9 10
150309 150303 122200 802799 150413 154004
2 2 1 1 2 1
American Dryer Corporation
Description Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 4 and 6 through 10) #10 x 1/2” Hex Head TEK Crimptite Screw #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Box Cover and Bracket ONLY #10-16 x 1/2” TORX Crimptite Screw Twin Speed Nut
88 Currant Road / Fall River, MA 02720-4781
Steam Damper Assembly
49
For Steam Models ONLY
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165012 165019 153002 152004 152002 153007 820321 820320
1 1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
153007 152002 115995 102350 151007 152007 100499 100500 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520
4 4 84 1 1 1 1 1 4 4 1 1 1 1 1 1 2 2 2 1 2 2 1
Telephone: (508) 678-9000
Description Steam Coil Assembly Steel Steam Coil Assembly (optional) 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 7/16-20 Stainless Steel Acorn Nut 7/16-20 Hex Nut 1-1/2” Bore x 3” Stroke Piston Piston Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Slotted Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
50
Microprocessor Reversing Contactor Mounting Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
11 12 13
332346 121010 150108 153001 153002 152004 120765 132445 132467 132468 882386 132458 137060 137013 ---------
1 1 1 2 2 2 2 1 1 1 1 1 1 4 1
14 15 16 17 18 19
150300 150008 120701 151000 150309 120768
4 2 1 2 2 9
10
American Dryer Corporation
Description Contactor/Relay Mounting Panel ONLY L-70 Ground Lug #8-32 x 1/2” Pan Head Machine Screw 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut End Stop/Bracket 3 hp Impellor Contactor 208 Volt Blower Overload (for 208/230/240 volt models Only) 380 Volt Blower Overload (for 380/460/480/575/600 volt models Only) Reversing (impellor/blower/fan) Contactor - 24 VAC Reversing Contactor with N.C. Connection Arc Suppressor (A.S.) Board (3) Nylon Standoff Step Down Transformer (refer to Step Down Transformer Application Listing on page 53) #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Slotted Round Head Machine Screw 4-Position Power Distribution Block #6-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Din Mounting Rail (sold by the inch)
88 Currant Road / Fall River, MA 02720-4781
51
Dual Timer Reversing Contactor Mounting Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
11 12 13 14
332346 121010 150108 153001 153002 152004 120765 132445 132467 132468 882386 132458 150108 132198 151001 ---------
1 1 1 2 2 2 2 1 1 1 1 1 2 1 2 1
15 16 17 18 19 20
150300 150008 120701 151000 150309 120768
4 2 1 2 2 9
10
Telephone: (508) 678-9000
Description Contactor/Relay Mounting Panel ONLY L-70 Ground Lug #8-32 x 1/2” Phillips Pan Head Machine Screw 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut End Stop/Bracket 3 hp Impellor Contactor 208 Volt Blower Overload (for 208/230/240 volt model Only) 380 Volt Blower Overload (for 380/460/480/575/600 volt model Only) Reversing (impellor/fan/blower) Contactor - 24 VAC Reversing Contactor with N.C. Connection #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Timer ONLY (50/60 Hz) - 24 VAC #8-32 Pal Nut Step Down Transformer (refer to Step Down Transformer Application Listing on page 53) #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Slotted Round Head Machine Screw 4-Position Power Distribution Block #6-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Din Mounting Rail (sold by the inch)
Fax: (508) 678-9447
52
Extended Back Guard Assembly
Illus. No.
Part No.
Qty.
1 2 3
813029 150301 354000 354003 112017 112229 112519 --------112534
1 12 1 1 1 1 1 1 1
4 5 6 7 8
American Dryer Corporation
Description Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Gas and Electric Lower Back Guard Steam Lower Back Guard ADC Name and Address Label Installation Instructions Label Routine Maintenance Label Dryer Data Label Phase 5 Non-Coin Program Location Label (for microprocessor models Only)
88 Currant Road / Fall River, MA 02720-4781
53
Step Down Transformer Application Listing
STEP DOWN TRANSFORMER APPLICATION LISTING (REVERSING RELAY BOX) HEAT
GAS STEAM
ELECTRIC
VOLTAGE
WIRE SERVICE
380
TRANSFORMER PART NUMBER MICROPROCESSOR MODELS
TIMER MODELS
3 or 4
132059
132059
416
3 or 4
132062
132062
440
3 or 4
132056
132056
460/480
3 or 4
132053
132053
575
3
132050
132050
380
3 or 4
132059
N/R
416
3 or 4
132062
N/R
460/480
3 or 4
132053
N/R
575
3
N/A
N/A
N/A = Not available. N/R = Not required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
Electric Oven Component Application Listing
72 kW OVEN
For Electric Models ONLY
VOLTS
208
230
380
416
480
PHASE
3ø
3ø
3ø
3ø
3ø
WIRE
3
3
3 or 4
3 or 4
3 or 4
815816
815817
815820
815821
815822
QTY.
18
18
18
18
18
SIZE
4 kW
4 kW
4 kW
4 kW
4 kW
120008
120009
120044
120008
120009
OVEN ASSY. PART NO.
ELEMENTS
PART NO.
OVEN WIRE
QTY.*
6’
25’
6’
25’
3’
8’
3’
25’
3’
25’
SIZE
#2
#8
#2
#8
#2
#8
#2
#8
#2
#8
PART NO. TERMINAL LUG
QTY. PART NO.
133302 133100 133302 133100 133302 133100 133302 133100 133302 133100 13
80 kW OVEN
13
6
9
1
9
1
9
1
121010 121012 121010 121012 121010 121012 121010 121012 121010 121012
BUS BAR PART NO. 121011*
2’
2’
3’
3’
3’
VOLTS
208
230
380
416
480
PHASE
3ø
3ø
3ø
3ø
3ø
WIRE
3
3
3 or 4
3 or 4
3 or 4
815823
815824
815810
815826
815827
QTY.
18
18
18
18
18
SIZE
4.5 kW
4.5 kW
4.5 kW
4.5 kW
4.5 kW
PART NO.
120047
120048
120022
120047
120048
OVEN ASSY. PART NO.
ELEMENTS
OVEN WIRE
QTY.*
6’
25’
6’
25’
3’
25’
3’
25’
3’
25’
SIZE
#2
#8
#2
#8
#1
#8
#1
#8
#2
#8
PART NO. TERMINAL LUG
QTY. PART NO.
BUS BAR PART NO. 121011*
*
6
133302 133100 133302 133100 133301 133100 133301 133100 133302 133100 18
18
121010
121010
8’
8’
10
1
18
1
18
1
121010 121012 121010 121012 121010 121012 11’
11’
11’
Sold by the foot.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Electric Oven Power Distribution 72 kW 208-240 VAC 3ø 50/60 Hz
ELECTRIC SERVICE
QTY. ELEMENTS
ELEMENT PART NUMBER
OVEN AMPS
208v 3ø 3, 4w
18
120008
240v 3ø 3, 4w
18
120009
Telephone: (508) 678-9000
WIRE SIZE
CONTACTOR
24 VAC STEP DOWN TRANSFORMER
A
B
C
200
2
2
8
131385
132004
174
2
2
8
131385
132004
Fax: (508) 678-9447
56
Electric Oven Power Distribution 72 kW 380-416/480 VAC 3ø 50/60 Hz
ELECTRIC SERVICE
QTY. ELEMENTS
ELEMENT PART NUMBER
OVEN AMPS
380v 3ø 3, 4w
18
1200044
416v 3ø 3, 4w
18
480v 3ø 3, 4w
18
American Dryer Corporation
WIRE SIZE
CONTACTOR
24 VAC STEP DOWN TRANSFORMER
A
B
110
2
8
131385
132004
120008
100
2
8
131385
132004
120009
87
2
8
131385
132004
88 Currant Road / Fall River, MA 02720-4781
57
Electric Oven Power Distribution 80 kW 208-240 VAC 3ø 50/60 Hz
ELECTRIC SERVICE
QTY. ELEMENTS
ELEMENT PART NUMBER
OVEN AMPS
208v 3ø 3, 4w
18
1200047
240v 3ø 3, 4w
18
120048
Telephone: (508) 678-9000
WIRE SIZE
CONTACTOR
24 VAC STEP DOWN TRANSFORMER
A
B
C
222
2
2
8
131385
132004
193
2
2
8
131385
132004
Fax: (508) 678-9447
58
Electric Oven Power Distribution 80 kW 380-416/480 VAC 3ø 50/60 Hz
ELECTRIC SERVICE
QTY. ELEMENTS
ELEMENT PART NUMBER
OVEN AMPS
380v 3ø 3, 4w
18
1200022
416v 3ø 3, 4w
18
480v 3ø 3, 4w
18
American Dryer Corporation
WIRE SIZE
CONTACTOR
24 VAC STEP DOWN TRANSFORMER
A
B
122
1
8
131385
132004
120047
111
1
8
131385
132004
120048
96.3
2
8
131385
132004
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Wiring
59
72/80 kW 208-240 VAC 3ø 50/60 Hz
Telephone: (508) 678-9000
Fax: (508) 678-9447
60
Electric Oven Wiring 72/80 kW 380-416/480 VAC 3ø 50/60 Hz
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sprinkler Pneumatic Assembly
Illus No. 1 2 3 4 5 6 7 8 9 10
Part No. 150524 153007 153018 100556 100462 143283 143151 143100 821532 150522
Qty. 2 2 4 1 1 1 1 5 1 4
Telephone: (508) 678-9000
61
Description 1/4-20 x 2” Long Bolt 1/4” Lock Washer 1/4” Flat Washer Sprinkler Solenoid Valve, 120 Volt 3/8” Silencer 3/8” Poly x 3/8” M.P.T. Connector, Brass 1/4” Compression x 3/8” M.P.T. Elbow, Brass 1/4” Aluminum Tubing Sprinkler Solenoid Bracket 1/4-20 x 1/2” Long TEK Screw
Fax: (508) 678-9447
62
American Dryer Corporation
Sprinkler Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
63
Sprinkler Panel Assembly
Illus No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Part No.
Qty.
Description
120768 150300 120766 120758 136033 120756 120761 120750 136050 120999 120721 136039 120754 131409 131405 131408 150106 150108 153000 132091 333002 153000 150108 821761 331499 122424 821990
5-1/2 2 1 7 1 1 9 2 2 4 2 1 1 2 2 2 3 4 4 1 1 2 2 1 1 1 1
35 x 15 mm Din Rail #10-16 x 1/2” Self Drilling Sheet Metal Screw End Section Feed Thru Terminal Block 3-amp 3AG Fuse 1/4” Fuse Terminal Block with Light Emitting Diode (L.E.D.) 4 Position Feed Thru Terminal Block Ground Terminal Block 3AG 1-amp Fuse Slo-Blo Blank Marking Tag Disconnect Fuse Block 3AG 5 x 20 mm 250 mA Med. LAG Fuse 5 x 20 mm Fuse Terminal Block with Light Emitting Diode (L.E.D.) Hold Down Spring Double Pole Double Throw Relay Relay Socket with Screw Terminals #8-32 x 1” Phillips Head Machine Screw #8-32 x 1/2” Machine Screw #8 Flat Washer 208-240 Volt to 120 Volt Transformer Temperature Controller Mounting Bracket #8 Flat Washer #8-32 x 1/2” Machine Screw Digital Controller Assembly Sprinkler Electrical Panel Power Warning Label J-Box with Hinged Cover
Telephone: (508) 678-9000
Fax: (508) 678-9447
64
American Dryer Corporation
Sprinkler Pipe Assembly
88 Currant Road / Fall River, MA 02720-4781
Sprinkler Pipe Assembly
Illus No. 1 2 3 4 5 6 7 8 9 10 11
12
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Part No.
Qty.
143556 142579 142602 142579 142548 152002 150522 332429 142584 154350 100565
1 1 1 1 1 2 2 1 1 1 1
881414
1
143227
1
143210
1
143100 152002 150522 332429 142709 154350 142924 142709 142504 142709 142504 102326 142750 321610 150522 142933 153007 152002 142751
5 2 2 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1
Telephone: (508) 678-9000
65
Description 1” Ball Valve 3/4” x 2” Nipple 1” Union 3/4” x 2” Nipple 1” x 90º Elbow 1/4-20 Hex Nut 1/4-20 x 1/2” Hex Head TEK Screw Rear Sprinkler Bracket 1” x 4-1/2” Nipple 1” Pipe U-Bolt 1” Water Valve, Air-Operated (for models mfd. as of September 1, 1996) 1” Water Valve, Air-Operated (for models mfd. prior to September 1, 1996) 1/4” Compression x 1/4” M.P.T. Elbow, Brass (for models mfd. as of July 7, 1996) 1/4” Compression x 1/4” M.P.T. Elbow, Brass (for models mfd. prior to July 7, 1996) 1/4” Aluminum Tubing 1/4-20 Hex Nut 1/4-20 x 1/2” Hex Head TEK Screw Rear Sprinkler Bracket 3/4” x 2” Nipple 1” Pipe U-Bolt 1” x 3/4” Reducing Coupling 3/4” x 2” Nipple 3/4” x 90º Elbow 3/4” x 2” Nipple 3/4” x 90º Elbow Sprinkler Pipe Gasket 3/4” x 46” Nipple with 1/8” Holes Sprinkler Sensor Support Bracket 1/4-20 x 1/2” Hex Head TEK Screw 3/4” Pipe Strap 1/4” Lock Nut 1/4-20 Hex Nut 3/4” Pipe End Cap
Fax: (508) 678-9447
66
American Dryer Corporation
Relay Panel (Sprinkler Option)
88 Currant Road / Fall River, MA 02720-4781
67
Relay Panel (Sprinkler Option)
Illus No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
332346 121010 150108 153001 153002 152004 120765 132445 132467
1 1 1 2 2 2 2 1 1
132468
1
10 11 12 13
132444 137060 137013 --------
1 1 4 1
14 15 16 17 18 19 20
150300 150008 120701 151000 150415 120768 132431 132432
4 2 2 2 2 9 1 2
Telephone: (508) 678-9000
Description Contactor/Relay Mounting Panel L-70 Ground Lug #8-32 x 1/2” Pan Head Machine Screw 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut End Stop/Bracket 3 hp Impellor Contactor 208 Volt Blower Overload (for use on models mfd. for 208/230/240V electric service) 380 Volt Blower Overload (for use on models mfd. for 380/460/480/575/600V electric service) 3 hp Control Relay with a 110V Coil Arc Suppressor (A.S.) Board Nylon Standoff Step Down Transformer (refer to Step Down Transformer Application Listing on page 53) #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1/4” Slotted Round Head Machine Screw 4-Position Power Distribution Block #6-32 Pal Nut #10-16 x 1/2” Phillips Round Head Crimptite Screw Din Mounting Rail (sold by the inch) Reversing Contactor 24 VAC Contact Replacement Coil 24 VAC
Fax: (508) 678-9447
68
Temperature Sensor Assembly For Sprinkler
Illus No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
331877 150523 881312 143296 120649 120914 120915 122736 881228
1 2 1 1 1 1 1 3 1
10 11 12 13
152000 120703 122427 150008
2 1 1 2
American Dryer Corporation
Description Temperature Sensor Mounting Plate 1/4-20 x 3/4” Hex Washer Machine Bolt Temperature Probe Assembly 1/4” Compression Fitting 1/2” N.P.T. Cord Grip (green) 1/2” Metal Clad “O” Ring 1/2” N.P.T. Lock Nut 18 AWG Ferrule (yellow) Sprinkler Temperature Probe Assembly (includes illus. nos. 9 and 12) #6-32 Hex Nut 6 Position Screw Connector Caution Label #6-32 x 1-1/4” Machine Screw
88 Currant Road / Fall River, MA 02720-4781
69
Back Guard Assembly
Illus No.
Part No.
Qty.
1 2 3 4 5 6 7 8
881306 150301 354000 112017 112229 112519 ——— 112534
1 12 1 1 1 1 1 1
Telephone: (508) 678-9000
Description Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Gas and Electric Lower Back Guard ADC Name and Address Label Installation Instructions Label Routine Maintenance Label Dryer Data Label Phase 5 Non-Coin Program Location Label (Microprocessor Models Only)
Fax: (508) 678-9447
70
Part No. 112280 114001 114006 120100 120300 120400 120500 120600 120800 120802 120902 120903 121014 121026 121499 121500 122503 122804 121507 880200
Additional Parts Available
Description “Clean Lint Screen” Label “CAUTION-Exhausted/Lint Screen” Label “WARNING - Fire Hazards” Label 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX retainer clip) 3/8” Greenfield (BX) 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 1/4” Insulated (female) Terminal Tab Receptacle Combination 5-1/2” Harness Tie 8” Harness Tie Harness Tie Mounting Clip Manometer (water column test gauge) Snap Wire Tie Screw Mount Electrical Terminal (assortment) Kit
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450160
11 - 12/04/03-1
