Transcript
AD-200 Non-Tilt Parts Manual 24 VAC Phase 5 1992 thru 1997
American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 Telephone: (508) 678-9010 / Fax: (508) 678-9447 E-mail:
[email protected]
072092 Rev. 120296SL/abe
ADC Part No. 450115
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY properly licensed technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. WARNING: UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled. WARNING: The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJURY or FIRE COULD RESULT. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information:
DATE OF PURCHASE
MODEL NO.
AD-200 Non-Tilt
DISTRIBUTORS NAME Serial Number(s)
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at (508) 678-9010. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS MUST BE POSTED IN A PROMINENT LOCATION. THE INSTRUCTIONS TO BE POSTED SHALL BE OBTAINED FROM THE LOCAL GAS SUPPLIER.
Table of Contents AD-200 Front Panel Assembly - Automatic Door ................................................................................................................................ 2, 3 AD-200 Front Panel Assembly - Manual Door ................................................................................................................................... 4, 5 Left and Right Control Door Assemblies - for models mfd. as of April 4, 1996 ................................................................................. 6, 7 Left and Right Control Door Assemblies - for models mfd. prior to April 4, 1996 ............................................................................ 8, 9 Left Load Door Assembly - Automatic Door .................................................................................................................................... 10, 11 Right Load Door Assembly - Automatic Door .................................................................................................................................. 12, 13 Left Load Door Assembly - Manual Door - for models mfd. as of November 1, 1995 ................................................................ 14, 15 Right Load Door Assembly - Manual Door - for models mfd. as of November 1, 1995 .............................................................. 16, 17 Left Load Door Assembly - Manual Door - for models mfd. prior to November 1, 1995 ........................................................... 18, 19 Right Load Door Assembly - Manual Door - for models mfd. prior to November 1, 1995 ......................................................... 20, 21 Pneumatics Assembly - Automatic Door ................................................................................................................................................. 22 Magnetic Door Switch Assembly ............................................................................................................................................................ 23 ADG-200 Left Hand Control Panel Assembly - for Gas Models mfd. with Thermal-Magnetic Protection ONLY for Gas Models mfd. as of October 2, 1995 ............................................................................................................................ 24, 25 ADS-200 Left Hand Control Panel Assembly - for Steam Models mfd. with Thermal-Magnetic Protection ONLY for Steam Models mfd. as of October 19, 1995 ..................................................................................................................... 26, 27 ADG-200 Left Hand Control Panel Assembly - for Gas Models mfd. with Fuse Protection ONLY for Gas Models mfd. prior to October 2, 1995 ....................................................................................................................... 28, 29 ADS-200 Left Hand Control Panel Assembly - for Steam Models mfd. with Fuse Protection ONLY for Steam Models mfd. prior to October 19, 1995 ................................................................................................................ 30, 31 Right Hand Control Panel Assembly - Automatic Door .................................................................................................................... 32, 33 Right Hand Control Panel Assembly - Manual Door ............................................................................................................................. 34 Side Panel Assemblies .............................................................................................................................................................................. 35 Back Panel Assemblies ............................................................................................................................................................................. 36 Tumbler and Idler Shaft Assembly ........................................................................................................................................................... 37 Drive Shaft Assembly .............................................................................................................................................................................. 38 Tumbler Retaining Wheel Assembly ........................................................................................................................................................ 39 Lint Drawer/Basket Assembly ................................................................................................................................................................. 40 Temperature Sensor Bracket Assembly ................................................................................................................................................... 41 Drive Motor Assembly ...................................................................................................................................................................... 42, 43 ADG-200 Blower Assembly - for Gas Models ONLY .................................................................................................................... 44, 45 ADS-200 Blower Assembly - for Steam Models ONLY ................................................................................................................ 46, 47 ADG-200 Gas Burner Assembly ....................................................................................................................................................... 48, 49 DSI Module Assembly - for Gas Models ONLY ................................................................................................................................... 50 Sail Switch Assembly ............................................................................................................................................................................... 51 ADS-200 Steam Coil Assembly ......................................................................................................................................................... 52, 53 Sprinkler Control Panel Assembly ..................................................................................................................................................... 54, 55 Sprinkler Piping Assembly ................................................................................................................................................................. 56, 57 Sprinkler Temperature Probe Junction Box Assembly ............................................................................................................................ 58 Pneumatic Assembly - 2 Automatic Doors .............................................................................................................................................. 59 AD-200 Air Jet Assembly ....................................................................................................................................................................... 60 Filter/Regulator/Lubricator Assembly ...................................................................................................................................................... 61 End of Cycle Light Assembly .................................................................................................................................................................. 62 AD-200 Rotational Sensor Assembly ...................................................................................................................................................... 63 Back Guard Assembly .............................................................................................................................................................................. 64 AD-200 Overload/Contactor Chart .......................................................................................................................................................... 65 Transformer Usage Listing ....................................................................................................................................................................... 66
2
AD-200 Front Panel Assembly AUTOMATIC DOOR
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
3
AD-200 Front Panel Assembly AUTOMATIC DOOR
Illus. No.
Part No. Qty.
1 2 3 4* 5* 6* 7* 8* 9 10 11 12 13 14 15 16* 17 18 19
332680 150522 332681 332679 821241 821239 881117 821285 153001 150501 153002 150510 153007 153018 170364 881116 154312 170364 ---------
20 21 22 23 24* 25 26 27 28 29 30 31 32 33 34 35 36 37* 38 39
150523 150617 153005 153004 881109 150501 153002 153001 115998 152011 153050 153026 150605 170365 153007 152002 154312 821244 153018 150523
Description
1 15 2 1 1 1 1 1 8 8 8 12 12 12 1 1 14 1 --
Left Gusset (for Gas Models ONLY) 1/4-20 x 1/2” Hex Washer TEK Screw (for Gas Models ONLY) Right Gusset (for Gas Models ONLY) Top Front Panel (for Gas Models ONLY) Upper Guard Middle Guard Left Control Cabinet Bottom Guard 5/16” Flat Washer 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 1/4-20 x 3/4” Hex Head Machine Bolt 1/4” Lock Washer 1/4” Flat Washer Bottom Door Track Right Control Cabinet #10-32 x 3/4” Socket Head Cap Screw Bottom Door Track Tumbler Retaining Wheel (refer to Tumbler Retaining Wheel Assembly on page 39) 5 1/4-20 x 3/4” Hex Washer Machine Bolt 8 3/8-16 x 1” Hex Head Bolt 8 3/8” Lock Washer 8 3/8” Flat Washer 1 Front Panel Assembly 12 5/16-18 x 3/4” Hex Head Machine Bolt 12 5/16” Lock Washer 12 5/16” Flat Washer 180 AD-200 Tumbler Ring Felt (sold by the inch) 4 1/2-13 Hex Nut 8 1/2” x 1-1/16” Flat Washer 4 1/2” Lock Washer 4 1/2-13 x 1-1/2” Hex Head Bolt 1 Upper Door Track 12 1/4” Lock Washer 12 1/4-20 Hex Nut 15 #10-32 x 3/4” Socket Head Cap Screw 2 Tumbler Retaining Wheel Cover 12 1/4” Flat Washer 5 1/4-20 x 3/4” Hex Washer Machine Bolt
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
4
AD-200 Front Panel Assembly MANUAL DOOR
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-200 Front Panel Assembly
5
MANUAL DOOR
Illus. No.
Part No. Qty.
1 2 3* 4 5* 6* 7* 8* 9 10 11 12 13 14 15* 16
332680 150522 821241 332681 332679 821239 881117 821285 153001 153002 150501 150510 153007 153018 881116 ---------
17 18 19 20 21* 22 23 24 25 26 27 28 29 30 31 32 33 34* 35
150523 150617 153005 153004 881108 150501 153002 153001 115998 152011 153050 153026 150605 170365 153007 152002 154312 821244 153018
Description
1 15 1 2 1 1 1 1 8 8 8 12 12 12 1 --
Left Gusset (for Gas Models ONLY) 1/4-20 x 1/2” Hex Washer TEK Screw (for Gas Models ONLY) Upper Guard Right Gusset (for Gas Models ONLY) Top Front Panel (for Gas Models ONLY) Middle Guard Left Control Cabinet Bottom Guard 5/16” Flat Washer 5/16” Lock Washer 5/16-18 x 3/4” Hex Head Machine Bolt 1/4-20 x 3/4” Hex Head Machine Bolt 1/4” Lock Washer 1/4” Flat Washer Right Control Cabinet Tumbler Retaining Wheel (refer to Tumbler Retaining Wheel Assembly on page 39) 5 1/4-20 x 3/4” Hex Washer Machine Bolt 8 3/8-16 x 1” Hex Head Bolt 8 3/8” Lock Washer 8 3/8” Flat Washer 1 Front Panel Assembly 12 5/16-18 x 3/4” Hex Head Machine Bolt 12 5/16” Lock Washer 12 5/16” Flat Washer 180 AD-200 Tumbler Ring Felt (sold by the inch) 4 1/2-13 Hex Nut 8 1/2” x 1-1/16” Flat Washer 4 1/2” Lock Washer 4 1/2-13 x 1-1/2” Hex Head Bolt 1 Upper Door Track 12 1/4” Lock Washer 12 1/4-20 Hex Nut 15 #10-32 x 3/4” Socket Head Cap Screw 2 Tumbler Retaining Wheel Cover 12 1/4” Flat Washer
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
6
Left and Right Control Door Assemblies for models mfd. as of April 4, 1996
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Left and Right Control Door Assemblies for models mfd. as of April 4, 1996
Illus. No. 1 2 3 4 5*
Part No. Qty.
6 7*
160140 160050 160014 821334 112360 870011 112535 821739
1 1 1 1 1 1 1 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
137225 153010 150005 160140 160050 160014 112095 112534 122351 122419 123201 122410 123212 123204 122421 132395 132388 132395 132387 122424
1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Description ACE XX4451 Key ONLY ACE Control Door Lock ONLY less Key (keyed to #XX4451) Cam ONLY Left Hand Control Door Assembly ADC Logo ONLY (Tape Kit not included) Logo Double Tape Kit OPL English Keyboard Label Assembly Right Hand Control Door Assembly (includes illus. nos. 7, 9, and 10) Phase 5 OPL Reversing Controller with Air Jet #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw ACE XX4451 Key ONLY ACE Control Door Lock ONLY less Key (keyed to #XX4451) Cam ONLY “Phase 5 Computer System” Label “Phase 5 Program Location” Label Large “EMERGENCY STOP” (Mushroom Head) Button “EMERGENCY STOP” Nameplate Green “CONTROL VOLTAGE ON” Button Power “ON” Nameplate 24 VAC Incandescent Bulb Red “CONTROL VOLTAGE OFF” Button Power “OFF” Nameplate Mounting Base with 1 Normally Closed (N.C.) Contact Block Normally Open (N.O.) Contact Block with Direct Supply Mounting Base with 1 Normally Closed (N.C.) Contact Block Normally Closed (N.C.) Contact Block Power Warning Label “Small Triangle”
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
8
Left and Right Control Door Assemblies for models mfd. prior to April 4, 1996
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Left and Right Control Door Assemblies for models mfd. prior to April 4, 1996
Illus. No. 1 2
3 4 5*
6 7*
8 9 10 11 12
13 14 15
Part No. Qty. Description 160140 160050
1 1
160038
1
160014 112360 870011 821334
1 1 1 1
821228
1
112535 821440
1 1
821327
1
137225 153010 150005 160140 160050
1 2 2 1 1
160038
1
112095 112534 160014
1 1 1
ACE XX4451 Key ONLY ACE Control Door Lock ONLY less Key (keyed to #XX4451) For models mfd. as of July 20, 1992 ACE Control Door Lock ONLY less Key (keyed to #XX4451) For models mfd. prior to July 20, 1992 Cam ONLY ADC Logo ONLY (Tape Kit not included) Logo Double Tape Kit Left Hand Control Door Assembly (for models mfd. as of July 20, 1992) Left Hand Control Door Assembly (for models mfd. prior to July 20, 1992) OPL English Keyboard Label Assembly Right Hand Control Door Assembly (includes illus. nos. 7, 9, and 10) For models mfd. as of July 20, 1992 Right Hand Control Door assembly (includes illus. nos. 7, 9, and 10) For models mfd. prior to July 20, 1992 Phase 5 OPL Reversing Controller with Air Jet #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw ACE XX4451 Key ONLY ACE Control Door Lock ONLY less Key (keyed to #XX4451) For models mfd. as of July 20, 1992 ACE Control Door Lock ONLY less Key (keyed to #XX4451) For models mfd. prior to July 20, 1992 “Phase 5 Computer System” Label “Phase 5 Program Location” Label Cam ONLY
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
10
Left Load Door Assembly AUTOMATIC DOOR
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Left Load Door Assembly
11
AUTOMATIC DOOR
Illus. No.
Part No. Qty.
1*
881112
1
2 3 4 5 6 7 8 9 10 11* 12 13 14 15 16*
881106 150112 153018 153007 152002 102102 154200 170367 170366 115995 334134 152002 153007 170366 170367 881133
1 4 4 4 2 1 1 2 2 125 1 2 2 2 2 1
17 18 19
334123 150301 150112 153018
1 3 2 2
Description Left Automatic Load Door Assembly Complete (includes illus. nos. 1 through 11) Left Automatic Load Door ONLY 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Flat Washer 1/4” Lock Washer #1/4-20 Hex Nut Door Magnet 5/32” Pop Rivet Stainless Steel Stationary Bushing Stainless Steel Sealed Wheel Felt Gasket (sold by the inch) Automatic Door Bracket 1/4-20 Hex Nut 1/4” Lock Washer Stainless Steel Sealed Wheel Stainless Steel Stationary Bushing Lower Trolley Assembly Complete (includes illus. nos. 12 through 16, 18, and 19) Lower Trolley ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Flat Washer
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
12
Right Load Door Assembly AUTOMATIC DOOR
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Right Load Door Assembly
13
AUTOMATIC DOOR
Illus. No. 1*
Part No. Qty. 881113
1
13 14 15 16 17*
881107 150112 153018 153007 334134 152002 102102 154200 170367 170366 115995 102215 170730 152002 153007 170366 170367 881133
1 4 4 4 1 2 1 1 2 2 80 1 2 2 2 2 1
18 19 20
334123 150301 152112 153018
1 3 2 2
2 3 4 5* 6 7 8 9 10 11 12
Description Right Automatic Load Door Assembly Complete (includes illus. nos. 1 through 12) Right Automatic Load Door ONLY 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Flat Washer 1/4” Lock Washer Automatic Door Bracket 1/4-20 Hex Nut Door Magnet 5/32” Pop Rivet Stainless Steel Stationary Bushing Stainless Steel Sealed Wheel Felt Gasket (sold by the inch) Door Window Door Window Adhesive (10.3 oz. cartridge) 1/4-20 Hex Nut 1/4” Lock Washer Stainless Steel Sealed Wheel Stainless Steel Stationary Bushing Lower Trolley Assembly Complete (includes illus. nos. 13 through 17, 19, and 20) Lower Trolley ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Flat Washer
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
14
Left Load Door Assembly MANUAL DOOR for models mfd. as of November 1, 1995
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Left Load Door Assembly
15
MANUAL DOOR for models mfd. as of November 1, 1995
Illus. No.
Part No.
Qty.
1*
821728
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15
150112 153018 170367 170366 153007 152002 150512 152002 102102 154200 115995 102111 150301 170357
2 2 2 2 2 2 2 2 1 1 125 2 4 1
Description Left Manual Load Door Assembly Complete (includes illus. nos. 1 through 15) 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Flat Washer Stainless Steel Stationary Bushing Stainless Steel Sealed Wheel 1/4” Lock Washer 1/4-20 Hex Nut 1/4-20 x 1/2” Hex Head Machine Bolt 1/4-20 Hex Nut Door Magnet 5/32” Pop Rivet Felt Gasket (sold by the inch) AD-200 Door Magnet #8-18 x 7/16” Phillips Pan Head TEK Screw Lower Door Slide
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
16
Right Load Door Assembly MANUAL DOOR for models mfd. as of November 1, 1995
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Right Load Door Assembly
17
MANUAL DOOR for models mfd. as of November 1, 1995
Illus. No.
Part No. Qty.
1*
821727
1
2
102215 170730 150112 153018 170367 170366 153007 152002 150512 152002 102102 154200 115995 150301 170357
1 2 2 2 2 2 2 2 2 1 1 80 4 1
3 4 5 6 7 8 9 10 11 12 13 14 15
Description Right Manual Load Door Assembly Complete (includes illus. nos. 1 through 15) Door Window Door Window Adhesive (10.3 oz. cartridge) 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Flat Washer Stainless Steel Stationary Bushing Stainless Steel Sealed Wheel 1/4” Lock Washer 1/4-20 Hex Nut 1/4-20 x 1/2” Hex Head Machine Bolt 1/4-20 Hex Nut Door Magnet 5/32” Pop Rivet Felt Gasket (sold by the inch) #8-18 x 7/16” Phillips Pan Head TEK Screw Lower Door Slide
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
18
Left Load Door Assembly MANUAL DOOR for models mfd. prior to November 1, 1995
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Left Load Door Assembly
19
MANUAL DOOR for models mfd. prior to November 1, 1995
Illus. No.
Part No.
Qty.
1*
881110
1
2 3 4 5* 6 7 8 9 10 11 12 13 14
881106 150112 153007 153018 332996 170367 170366 152002 102102 154200 115995 102111 150301 170357
1 4 4 4 2 2 2 2 1 1 125 2 4 1
Description Left Manual Load Door Assembly Complete (includes illus. nos. 1 through 14) Left Manual Load Door ONLY 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Lock Washer 1/4” Flat Washer Door Trolley Adjustment Plate Stainless Steel Stationary Bushing Stainless Steel Sealed Wheel 1/4-20 Hex Nut Door Magnet 5/32” Pop Rivet Felt Gasket (sold by the inch) AD-200 Door Magnet #8-18 x 7/16” Phillips Pan Head TEK Screw Lower Door Slide
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
20
Right Load Door Assembly MANUAL DOOR for models mfd. prior to November 1, 1995
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Right Load Door Assembly
21
MANUAL DOOR for models mfd. prior to November 1, 1995
Illus. No. 1* 2 3 4 5 6* 7 8 9 10 11 12 13 14
Part No. Qty. 881111
1
881107 102215 170730 150112 153007 153018 332996 170367 170366 152002 102102 154200 115995 150301 170357
1 1 4 4 4 2 2 2 2 1 1 80 4 1
Description Right Manual Load Door Assembly Complete (includes illus. nos. 1 through 14) Right Manual Load Door ONLY Door Window Door Window Adhesive (10.3 oz. cartridge) 1/4-20 x 1-1/4” Hex Head Machine Screw 1/4” Lock Washer 1/4” Flat Washer Door Trolley Adjustment Plate Stainless Steel Stationary Bushing Stainless Steel Sealed Wheel 1/4-20 Hex Nut Door Magnet 5/32” Pop Rivet Felt Gasket (sold by the inch) #8-18 x 7/16” Phillips Pan Head TEK Screw Lower Door Slide
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
22
Pneumatics Assembly AUTOMATIC DOOR
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Part No. Qty. 150308 153000 100431 128978 143156 143154 143110 153012 150103 152001 100431 153000 153012 152001
8 8 1 4 2 2 38 4 4 4 1 8 8 8
Description #8-32 x 2-1/2” Phillips Pan Head Machine Screw #8 Flat Washer Cable Cylinder 1/8” x 1/4” Tube Flow Control 1/4” Poly Tee 1/4” Brass Poly Connector 1/4” Poly Flo Tubing (sold by the foot) #8 Star Washer #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Hex Nut Cable Cylinder #8 Steel Burr #8 Star Washer #8-32 Hex Nut
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Magnetic Door Switch Assembly
Illus. No.
Part No.
Qty.
1
826514
4
2 3 4 5 6
122598 137028 137021 122599 881240
1 2 4 2 1
7 8 9
122598 137028 881241
1 2 1
10 11 12 13
122598 137028 122599 137021
1 2 2 4
Telephone: (508) 678-9010
23
Description Magnetic Door Switch Assembly with Nuts (includes illus. nos. 1 through 3) 2-Pin Connector (male) Pin Microprocessor Socket 2-Pin Socket Connector (female) Door Switch “Closed Position” Harness (includes illus. nos. 4 through 8) 2-Pin Connector (male) Pin Door Switch “Open Position” Harness (includes illus. nos. 9 through 13) 2-Pin Connector (male) Pin 2-Pin Socket Connector (female) Microprocessor Socket
Fax: (508) 678-9447
24
ADG-200 Left Hand Control Panel Assembly for Gas Models manufactured with Thermal-Magnetic Protection ONLY for Gas Models mfd. as of October 2, 1995
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11
332594 153004 153005 152005 150108 120730 120768 150300 150108 153000 ---------
1 4 4 4 2 1 4 2 4 4 -
12 13 14
120765 120721 136057 136105 136057 136105
2 3 or 4* 1 1 1 1
15
Description ADG-200 Non-Tilt (Touch Proof) Left Hand Electrical Control Panel ONLY 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut #8-32 x 1” Phillips Pan Head Machine Screw 30-Position (A, B, C) Terminal Block Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw #8-32 x 1” Phillips Pan Head Machine Screw #8 Steel Burr Transformer (refer to Transformer Usage Chart on page 66) End Stop/Bracket Fused Disconnect Fuse Holder 1/2-Amp (Slo Blo) Fuse ONLY (for 208/240 volt models Only) 0.3-Amp Fuse ONLY (for 380 to 600 volt models Only) 1/2-Amp (Slo Blo) Fuse ONLY (for 208/240 volt models Only) 0.3-Amp (Slo Blo) Fuse ONLY (for 380 to 600 volt models Only)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
25
ADG-200 Left Hand Control Panel Assembly (continued) for Gas Models manufactured with Thermal-Magnetic Protection ONLY for Gas Models mfd. as of October 2, 1995
Illus. No. 16 17 18
19 20 22 23 24 25 26 27 28 29** 30 31 32 33 34 35** 36** 37** 38 39 40 41 42 43 44 45 46
47 48 49 50** 51
Part No.
Qty.
136052 136057 131969 131963 131970 131962 132384 132389 120768 122434 132437 132424 120768 150300 132437 131970 131968 131951 132444 132465 120768 150300 120770 120760 120750 120758 120766 150512 121010 153007 152002 112075 122424 152001 153000 132270 132273 132271 132272 150108 153007 332692 120750 120761
1 1 1 1 1 1 1 1 6.5 1 3 1 7 2 3 1 1 1 1 1 3 2 2 3 1 2 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2
Description 4-Amp (Slo Blo) Fuse ONLY 1/2-Amp (Slo Blo) Fuse ONLY (for 380 to 600 volt models Only) Blower Motor Manual Starter (for 208/240 volt models Only) Blower Motor Manual Starter (for 380 volt models Only) Blower Motor Manual Starter (for 416/460 volt models Only) Blower Motor Manual Starter (for 575 volt models Only) Auxiliary Contact Block (for 208/240/575 volt models Only) Auxiliary Contact Block (for 380/416/460 volt models Only) Din Mounting Rail (sold by the inch) “Power Warning” Caution Label 24 - 48 Volt Varistor ONLY 3 HP 24 VAC Reversing Contactor Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw 24 - 48 Volt Varistor ONLY Drive Motor Manual Starter (for 208/240 volt models Only) Drive Motor Manual Starter (for 380/416/460 volt models Only) Drive Motor Manual Starter (for 575 volt models Only) 3 HP Control Relay - 110 Volt 50/60 Hz 7-1/2 HP 24 VAC Blower Contactor Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw End Bracket Terminal Block Ground Terminal Block Single Position Feed Thru Terminal Block End Section Plate 1/4-20 x 1/2” Hex Head Machine Bolt L-70 Ground Lug 1/4” Lock Washer 1/4-20 Hex Nut “GROUND HERE “ Label “POWER WARNING” Caution Label #8-32 Hex Nut #8 Steel Burr 3 HP Soft Start (for 208/240 volt models Only) 3 HP Soft Start (for 380/416 volt models Only) 3 HP Soft Start (for 460 volt models Only) 3 HP Soft Start (for 575 volt models Only) #8-32 x 1/2” Phillips Pan Head Machine Screw 1/4” Lock Washer Soft Start Mounting Plate Ground Terminal Block 4-Position Feed Thru Terminal Block
* For 380 to 600 volt models ONLY. ** For dryers mfd. with the Sprinkler Option ONLY.
Telephone: (508) 678-9010
Fax: (508) 678-9447
26
ADS-200 Left Hand Control Panel Assembly for Steam Models manufactured with Thermal-Magnetic Protection ONLY for Steam Models mfd. as of October 19, 1995
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12
332594 153004 153005 152005 150108 120730 120768 150300 120765 150108 153000 ---------
1 4 4 4 2 1 17.5 2 2 4 4 -
13 14 15
120721 120761 136057 136105
Description
ADS-200 Non-Tilt (Touch Proof) Left Hand Electrical Control Panel ONLY 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut #8-32 x 1” Phillips Pan Head Machine Screw 30-Position A, B, C Terminal Block Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw End Stop/Bracket #8-32 x 1” Phillips Pan Head Machine Screw #8 Steel Burr Transformer (refer to Transformer Usage Chart on page 66) 3 or 4* Fused Disconnect Fuse Holder 2 4-Position Feed Thru Terminal Block 1 1/2-Amp (Slo Blo) Fuse ONLY (for 208/240 volt models Only) 1 0.3-Amp Fuse ONLY (for 380 to 600 volt models Only)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADS-200 Left Hand Control Panel Assembly (continued)
27
for Steam Models manufactured with Thermal-Magnetic Protection ONLY for Steam Models mfd. as of October 19, 1995
Illus. No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50
Part No.
Qty.
Description
136057 136105 136038 136057 131955 131969 131954 132384 132389 131970 131968 131962 120768 150300 132437 132437 132434 120768 150300 132485 132437 132480 132465 132433 120768 150300 120770 120760 150512 121010 153007 152002 112075 122424 122424 150108 153000 150108 153000 332692 132270 132273 132271 132272 153000 152001 112750
1 1 1 1 1 1 1 1 1 1 1 1 17.5 2 2 1 1 17.5 2 1 1 1 1 1 3 2 2 3 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 2 2 1
1/2-Amp (Slo Blo) Fuse ONLY (for 208/240 volt models Only) 0.3-Amp (Slo Blo) Fuse ONLY (for 380 to 600 volt models Only) 8-Amp Fuse ONLY 1/2-Amp (Slo Blo) Fuse ONLY (for 380 to 600 volt models Only) 15 HP Blower Motor Manual Starter (for 208/230 volt models Only) 15 HP Blower Motor Manual Starter (for 380/416/460 volt models Only) 15 HP Blower Motor Manual Starter (for 575 volt models Only) Auxiliary Contact Block (for 208/240/575 volt models Only) Auxiliary Contact Block (for 380/416/460 volt models Only) 3 HP Drive Motor Manual Starter (for 208/230 volt models Only) 3 HP Drive Motor Manual Starter (for 380/416/460 volt models Only) 3 HP Drive Motor Manual Starter (for 575 volt models Only) Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw 24 - 48 Volt Varistor ONLY 24 - 48 Volt Varistor ONLY 3 HP 24 VAC Reversing Contactor Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw 24 - 48 Volt Varistor ONLY (for 208/230 volt models Only) 24 - 48 Volt Varistor ONLY (for 380/416/460/575 volt models Only) 15 HP Blower Contactor (for 208/240 volt models Only) 15 HP Blower Contactor (for 380/416/460 volt models Only) 15 HP Blower Contactor (for 575 volt models Only) Din Mounting Rail (sold by the inch) #10 x 3/8” Hex Washer TEK Screw End Bracket Terminal Block 1/4-20 x 1/2” Hex Head Machine Bolt L-70 Ground Lug 1/4” Lock Washer 1/4-20 Hex Nut “GROUND HERE “ Label “POWER WARNING” Caution Label “POWER WARNING” Caution Label #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr Soft Start Mounting Plate 3 HP Soft Start (for 208/230 volt models Only) 3 HP Soft Start (for 380/416 volt models Only) 3 HP Soft Start (for 460 volt models Only) 3 HP Soft Start (for 575 volt models Only) #8 Steel Burr #8-32 Hex Nut Ground Terminal Block (for 380 to 600 volt models Only)
* For 380 - 600 volt models ONLY.
Telephone: (508) 678-9010
Fax: (508) 678-9447
28
ADG-200 Left Hand Control Panel Assembly for Gas Models manufactured with Fuse Protection ONLY for Gas Models mfd. prior to October 2, 1995
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12
332594 153001 153002 152004 150106 120713 136008 150301 136057 136052 150108 153000
1 4 4 4 2 1 3 3 2 1 4 4
Description AD-200 Electrical Panel 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1” Phillips Round Head Machine Screw 18-Position Terminal Block Fuse Block/Strip #8-18 x 7/16” Phillips Pan Head TEK Screw 1/2-Amp (Slo Blo) Fuse ONLY 4-Amp Fuse ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
29
ADG-200 Left Hand Control Panel Assembly (continued) for Gas Models manufactured with Fuse Protection ONLY for Gas Models mfd. prior to October 2, 1995
Illus. No.
Part No.
Qty.
13
---------
-
14 15
132437 132434 120768 150300 132467 132468 136004 136025 136022 136073 150106 150108 332692 132270
2 1 3 1 1 1 3 3 3 4 2 1 1
132250
1
132272 132273 132271 153000 152001 150111 121012 152002 150108 120704 150108 ---------* ---------* ---------* ---------* ---------* 150300
1 1 1 2 2 1 1 1 4 1 2 3 1 1 1 1 3
16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31 32 33 34 35 36
Description Transformer (refer to Transformer Usage Chart on page 66) Varistor ONLY Reversing Drive Motor Contactor (208/230/380/416/480 volt) Din Mounting Rail ... Not Illustrated (sold by the inch) #10 x 1/2” Hex Washer TEK Screw ... Not Illustrated Drive Motor Overload (for 208/240 volt models Only) Drive Motor Overload (for 380/416/460 volt models Only) 30-Amp/600 VAC Fuse Block 12-Amp Fuse ONLY (for 208/230 volt models Only) 6-Amp Fuse ONLY (for 380/416 volt models Only) 5-Amp Fuse ONLY (for 460 volt models Only) #8-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/2” Phillips Pan Head Machine Screw Soft Start Mounting Plate Soft Start (for 208/240 volt models Only) For models mfd. as of June 1, 1992 Soft Start (for 208/240 volt models Only) For models mfd. prior to June 1, 1992 Soft Start (for 380 volt models Only) - 60 Hz ONLY Soft Start (for 380/416 volt models Only) - 50 Hz ONLY Soft Start (for 460 volt models Only) #8 Steel Burr #8-32 Hex Nut 1/4-20 x 1/2” Phillips Round Head Machine Screw L-125 Ground Lug 1/4-20 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw 3-Position Power Distribution Block #8-32 x 1/2” Phillips Pan Head Machine Screw Fuse ONLY Fuse Block Blower Motor Overload Blower Contactor Varistor ONLY #10 x 1/2” Hex Washer TEK Screw ... Not Illustrated
* Refer to AD-200 Overload/Contactor Chart on page 65.
Telephone: (508) 678-9010
Fax: (508) 678-9447
30
ADS-200 Left Hand Control Panel Assembly for Steam Models manufactured with Fuse Protection ONLY for Steam Models mfd. prior to October 19, 1995
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12
332594 153001 153002 152004 150106 120713 136008 150301 136057 136038 150108 153000
1 4 4 4 2 1 3 3 2 1 4 4
Description AD-200 Electrical Panel 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1” Phillips Round Head Machine Screw 18-Position Terminal Block Fuse Block/Strip #8-18 x 7/16” Phillips Pan Head TEK Screw 1/2-Amp (Slo Blo) Fuse ONLY 8-Amp Fuse ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Steel Burr
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
31
ADS-200 Left Hand Control Panel Assembly (continued) for Steam Models manufactured with Fuse Protection ONLY for Steam Models mfd. prior to October 19, 1995 Illus. No.
Part No.
Qty.
13
---------
-
14 15
132437 132434 120768 150300 132467 132468 136004 136025 136022 136073 150106 150108 332692 132270
2 1 3 1 1 1 3 3 3 4 2 1 1
132250
1
132272 132273 132271 153000 152001 150111 121012 152002 150108 120704 150108 ---------* ---------* ---------* ---------* ---------* 150300
1 1 1 2 2 1 1 1 4 1 2 3 1 1 1 1 3
16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31 32 33 34 35 36
Description Transformer (refer to Transformer Usage Chart on page 66) Varistor ONLY Reversing Drive Motor Contactor (208/230/380/416/480 volt) Din Mounting Rail ... Not Illustrated (sold by the inch) #10 x 1/2” Hex Washer TEK Screw ... Not Illustrated Drive Motor Overload (for 208/240 volt models Only) Drive Motor Overload (for 380/416/460 volt models Only) 30-Amp/600 VAC Fuse Block 12-Amp Fuse ONLY (for 208/230 volt models Only) 6-Amp Fuse ONLY (for 380/416 volt models Only) 5-Amp Fuse ONLY (for 460 volt models Only) #8-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/2” Phillips Pan Head Machine Screw Soft Start Mounting Plate Soft Start (for 208/240 volt models Only) For models mfd. as of June 1, 1992 Soft Start (for 208/240 volt models Only) For models mfd. prior to June 1, 1992 Soft Start (for 380 volt models Only) - 60 Hz ONLY Soft Start (for 380/416 volt models Only) - 50 Hz ONLY Soft Start (for 460 volt models Only) #8 Steel Burr #8-32 Hex Nut 1/4-20 x 1/2” Phillips Round Head Machine Screw L-125 Ground Lug 1/4-20 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw 3-Position Power Distribution Block #8-32 x 1/2” Phillips Pan Head Machine Screw Fuse ONLY Fuse Block Blower Motor Overload Blower Contactor Varistor ONLY #10 x 1/2” Hex Washer TEK Screw ... Not Illustrated
* Refer to AD-200 Overload/Contactor Chart on page 65.
Telephone: (508) 678-9010
Fax: (508) 678-9447
32
Right Hand Control Panel Assembly AUTOMATIC DOOR
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12
Part No. Qty. Description 120765 120766 120758 120761 120999 120750 150415 120768 121422 121429 121422 121429
2 1 * * * 1 4 12 12 12 12 12
End Stop End Plate Single Input Block 2-Position Block Blank Marking Tag Ground Block #10-16 x 1/2” Phillips Round Head Crimptite Screw Din Rail (sold by the inch) Wireway Cover (sold by the inch) Wireway (sold by the inch) Wireway Cover (sold by the inch) Wireway (sold by the inch)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
33
Right Hand Control Panel Assembly (continued) AUTOMATIC DOOR
Illus. No. 13 14 15 16 17
Part No. Qty. Description 121422 121429 150108 153000 826740
13 13 1 1 1
881496
1
18 19 20 21 22 23 24 25 26 27 28 29 30
121422 121429 120768 120765 150415 137912 120713 150106 131408 131407 131409 150103 ---------
15 15 12 2 2 1 1 2 * * * * -
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
150108 153000 152005 153005 153000 136008 136038 136057 120768 120765 120766 120752 120990 120998 150415 120761 120750 332934
4 4 4 4 4 3 1 2 4 1 * * * * 2 * * 1
Wireway Cover (sold by the inch) Wireway (sold by the inch) #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Flat Washer Solid State Mini Flasher - 24 VAC (for models mfd. as of January 30, 1997) Solid State Mini Flasher - 24 VAC (replaces Part No. 123220) Used on models mfd. prior to January 30, 1997 Wireway Cover (sold by the inch) Wireway (sold by the inch) Din Rail (sold by the inch) End Stop #10-16 x 1/2” Phillips Round Head Crimptite Screw Micro-1 Computer 18-Position Terminal Block #8-32 x 1” Phillips Round Head Machine Screw DPDT (Double-Pole-Double-Throw) Socket DPDT (Double-Pole-Double-Throw) Relay Hold Down #8-32 x 3/4” Phillips Pan Head Machine Screw Transformer (refer to Transformer Usage Chart on page 66) #8-32 x 1/2” Phillips Pan Head Machine Screw #8 Flat Washer 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Fuse Block 8-Amp Fuse 1/2-Amp (Slo Blo) Fuse Din Rail (sold by the inch) End Stop End Plate Disconnect Block 2-Pole Bus Bar (for disconnect block) Bus Bar Screw #10-16 x 1/2” Phillips Round Head Crimptite Screw 2-Position Block Ground Block AD-200 Right Side Electrical Panel
* As required.
Telephone: (508) 678-9010
Fax: (508) 678-9447
34
Right Hand Control Panel Assembly MANUAL DOOR
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
341370 152005 153005 153004 131932 150108 120715 150106 826740
1 4 4 4 3 8 2 4 1
881496
1
150103 131407 131408 131409
1 1 1 1
10 11 12 13
Description Right Hand Electrical Panel 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer SPST (Single-Pole-Single-Throw) 24 VAC Panel Mount Relay #8-32 x 1/2” Phillips Round Head Machine Screw 30-Position Terminal Block #8-32 x 1” Phillips Round Head Machine Screw Solid State Mini Flasher - 24 VAC (for models mfd. as of January 30, 1997) Solid State Mini Flasher - 24 VAC (replaces Part No. 123220) Used on models mfd. prior to January 30, 1997 #8-32 x 3/4” Phillips Round Head Machine Screw DPDT (Double-Pole-Double-Throw) Relay DPDT (Double-Pole-Double-Throw) Relay Socket Hold Down Clip
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
35
Side Panel Assemblies
Illus. No. 1* 2 3* 4 5* 6 7 8 9* 10* 11 12* 13 14 15 16* 17* 18 19*
Part No.
Qty.
821283 150523 881189 150523 881190 160034 160050 160140 881191 821283 150523 881189 160050 160140 160034 881190 881191 150523 821242
1 14 1 16 1 2 2 2 1 1 14 1 2 2 2 1 1 16 1
Description Left Top Side Panel 1/4-20 x 3/4” Hex Head TEK Screw Lower Side Panel for Hinged Doors 1/4-20 x 3/4” Hex Head TEK Screw Locking Hinged Side Panel Door less Locks Lock Cam ONLY ACE® Door Lock less Key (keyed to #XX4451) ACE® XX4451 Key ONLY Hinged Side Panel Door Assembly Top Right Side Panel (for Steam Models ONLY) 1/4-20 x 3/4” Hex Head TEK Screw Lower Side Panel for Hinged Doors ACE® Door Lock less Key (keyed to #XX4451) ACE® XX4451 Key ONLY Lock Cam ONLY Locking Hinged Side Panel Door less Locks Hinged Side Panel Door Assembly 1/4-20 x 3/4” Hex Head TEK Screw Top Right Side Panel (for Gas Models ONLY)
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
36
Back Panel Assemblies
Illus. No.
Part No.
Qty.
1* 2 3* 4* 5 6 7 8
821310 332571 821312 821311 150523 150504 153001 152004
1 2 1 1 32 14 28 14
Description Top Back Panel Assembly Rear Panel Reinforcement Middle Back Panel Assembly Bottom Back Panel Assembly 1/4-20 x 3/4” Hex Head Machine Bolt 5/16-18 x 1” Hex Head Machine Bolt 5/16” Flat Washer 5/16-18 Hex Nut
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
37
Tumbler and Idler Shaft Assemblies
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13
821217 821215 180007 880942 150620 153016 153016 153026 152011 143217 150609 152011 332507
1 2 2 2 4 4 4 4 4 2 2 2 1
Telephone: (508) 678-9010
Description Tumbler Assembly Drive Wheel Assembly 1-1/2” Trantorque 1-1/2” Pillow Block Bearing with Set Screws and Grease Fitting 1/2-13 x 2-1/2” Hex Head Machine Bolt 1/2” Flat Washer 1/2” Flat Washer 1/2” Lock Washer 1/2-13 Hex Nut 1/4-28 x 90° Lubrication Fitting 1/2-13 x 4-1/2” Hex Head Machine Bolt 1/2-13 Hex Nut 1-1/2” Diameter Idler Shaft
Fax: (508) 678-9447
38
Drive Shaft Assembly
NOTE: Refer to Rotational Sensor Assembly on page 63
Illus. No.
Part No.
Qty.
1 2 3*
101193 101150 100129 100136 332508 100704 821215 880942 150620 153016 153016 153026 152011 180007
1 1 2 2 1 1 2 2 4 4 4 4 4 2
4 5 6 7 8 9 10 11 12 13
Description 2B x 13.6 Pulley SK x 1-1/2” Bushing BX-94 Cogged V-Belt (for 60 Hz Models Only) BX-95 Cogged V-Belt (for 50 Hz Models Only) Tumbler Drive Shaft 1/4” x 1/4” x 1-3/4” Key Drive Wheel Assembly 1-1/2” Pillow Block Bearing with Set Screws and Grease Fitting 1/2-13 x 2-1/2” Hex Head Machine Bolt 1/2” Flat Washer 1/2” Flat Washer 1/2” Lock Washer 1/2-13 Hex Nut 1-1/2” Trantorque
* Replace in matched sets (both belts).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Tumbler Retaining Wheel Assembly
Illus. No.
Part No.
Qty.
1* 2 3 4 5 6 7
821244 150301 820566 152004 150509 153002 153001
1 4 1 1 1 1 1
39
Description Tumbler Retaining Wheel Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Tumbler Retaining Wheel Assembly 5/16 -18 Hex Nut 5/16 -18 Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer
* Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
40
Lint Drawer/Basket Assembly
Illus. No.
Part No.
Qty.
1*
880787
1
880786
1
117600 820017
7 1
821276
1
7
122116 122605 122701 122801 800264
1 2 4 1 1
8 9 10 11
304034 150301 122700 122604 150301
1 4 4 2 2
2 3
4 5 6
Description AD-200 Lint Drawer/Basket Assembly Complete (includes illus. nos. 1 and 2) For models mfd. as of March 2, 1992 AD-200 Lint Drawer/Basket Assembly Complete (includes illus. nos. 1 and 2) For models mfd. prior to March 2, 1992 Noise Supressor Tape (sold by the foot) AD-200 Lint Screen Assembly (for models mfd. as of March 2, 1992) AD-200 Lint Screen Assembly (for models mfd. prior to March 2, 1992) Lint Drawer/Basket Switch ONLY 4-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool Lint Drawer/Basket Switch Box Assembly Complete (includes illus. nos. 4 through 7) Lint Drawer/Basket Switch Cover ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Temperature Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
820967 820968
1 1
2 3 4 5 6 7 8 9 10 11
150000 153010 130112 152000 121028 122701 122605 154007 880251 150301
2 2 1 2 2 4 1 2 1 4
Telephone: (508) 678-9010
41
Description Sensor Bracket Assembly ONLY Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) #6-32 x 1/4” Slotted Round Head Machine Screw #6 Star Washer 225° Thermostat ONLY #6-32 Hex Nut 1/4” x .032 Insulated Terminal Socket Terminal ONLY 4-Pin Socket Connector (female) 1/4” Push-On Fastener 1/4” Temperature Sensor Probe #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
42
American Dryer Corporation
Drive Motor Assembly
88 Currant Road / Fall River, MA 02720-4781
43
Drive Motor Assembly
Illus. No. 1
2 3 4 5 6 7 8 9 10 11 12* 13 14 15 16 17 18 19 20 21 22 23* 24
25
Part No. Qty. Description 100043
1
100081
1
100019 101143 101144 150617 153005 153004 100060 152005 153004 101149 101166 101148 101147 100129 100136 341033 100704 880941 150600 153004 153004 153005 152005 101145 101146 100128 152004
1 1 1 4 4 4 1 4 4 1 1 1 1 2 2 1 2 2 4 4 4 4 4 1 1 2 2
152005
2
150613
2
880799
2
3 HP Motor 208-230/460v 3ø 60 Hz Models and 190/380/416v 3ø 50 Hz Models 3 HP Motor 380v 3ø 60 Hz Models and 200-230/400v 3ø 50 Hz Models 3 HP Motor 575v 3ø 60 Hz Models 2B x 3.8” Pulley SH x 1-1/8” Bushing 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Motor Base 3/8-16 Hex Nut 3/8” Flat Washer SH x 1-1/4” Bushing (for 60 Hz models Only) SDS x 1-1/4” Bushing (for 50 Hz models Only) 2B x 4.0 Pulley (for 60 Hz models Only) 2B x 4.8 Pulley (for 50 Hz models Only) BX-94 Cogged V-Belt BX-95 Cogged V-Belt 1-1/4” Idler Shaft (Drive Motor) 1/4” x 1/4” x 1-3/4” Key 1-1/4” Idler Bearing with Set Screws and Grease Fitting 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 2B x 11.0 Pulley SK x 1-1/4 Bushing BX-50 Cogged V-Belt 5/16-18 Hex Nut (for models mfd. as of October 2, 1992) 3/8-16 Hex Nut (for models mfd. prior to October 2, 1992) 5/16-18 x 4” Hex Head Machine Bolt (for models mfd. as of October 2, 1992) 3/8-16 x 4” Hex Head Machine Bolt (for models mfd. prior to October 2, 1992)
* Replace belts in matched sets (both belts).
Telephone: (508) 678-9010
Fax: (508) 678-9447
44
ADG-200 Blower Assembly for Gas Models ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADG-200 Blower Assembly
45
for Gas Models ONLY Illus. No. 1 2 3
4 5 6 7 8 9 10 11* 12 13
14 15
16 17 18 19 20 21 22 23**
24 25 26 27 28 29 30
Part No. Qty. Description 152005 153004 100046 100092
4 4 1 1
100021 100062 150617 153005 153004 100706 101148 101147 101152 101194 100140 101152 101148
1 1 4 4 4 1 1 1 1 1 2 1 1
101195
1
100706 332703
1 1
332626
1
100706 880879 150617 153005 153004 100802 116014 880788
1 2 4 4 4 2 1 1
821229
1
150617 153005 153004 100612 117600 153050 152006
4 4 4 1 4 1 2
3/8-16 Hex Nut 3/8” Flat Washer 7.5 HP Blower Motor 208-230/460v 3ø 60 Hz Models 7.5 HP Blower Motor 380v 3ø 60 Hz Models and 190-208/380-416v 3ø 50 Hz Models 7.5 HP Blower Motor 575v 3ø 60 Hz Models Blower Motor Slide Base 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer 5/16” x 5/16” x 1-3/8” Key 2B x 4.0 Pulley (for 60 Hz models Only) 2B x 4.8 Pulley (for 50 Hz models Only) SH x 1-3/8” Bushing (for 60 Hz models Only) SDS x 1-3/8” Bushing (for 50 Hz models Only) BX-38 Cogged V-Belt SH x 1-3/8” Bushing 2B x 4.0 Pulley (for models mfd. as of March 2, 1992) 2B x 4.4 Pulley (for models mfd. prior to March 2, 1992) 5/16” x 5/16” x 1-3/8” Key AD-200 Squirrel Cage (Blower Wheel) Shaft (for models mfd. as of March 2, 1992) AD-200 Squirrel Cage (Blower Wheel) Shaft (for models mfd. prior to March 2, 1992) 5/16” x 5/16” x 1-3/8” Key 1-3/8” Idler Bearing with Set Screws and Grease Fitting 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer 1-3/8” Retaining Ring Felt Seal (3” x 3”) Motor Mount Assembly (includes illus. nos. 23 and 28) For models mfd. as of March 2, 1992 Motor Mount Assembly (includes illus. nos. 23 and 28) For models mfd. prior to March 2, 1992 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer 1-1/4” Bore x 15” Squirrel Cage (Blower Wheel) Noise Suppressor Tape (sold by the foot) 1/2” Flat Washer 1/2-20 Left Hand Jam Nut
* Replace belts in matched sets (both belts). ** Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
46
ADS-200 Blower Assembly for Steam Models ONLY
Illus. No. 1 2 3
4 5
Part No. Qty. Description 152005 153004 100087
4 4 1
100082 181001 100046
1 1 1
100092
1
100062 150617
1 4
3/8-16 Hex Nut 3/8” Flat Washer 15 HP Blower Motor 208-230/460v 3ø 60 Hz Models and 190-230/380-416v 3ø 50 Hz Models (for models mfd. as of July 20, 1992) 15 HP Blower Motor 380v 3ø 60 Hz Models 15 HP Blower Motor 575v 3ø 60 Hz Models 7.5 HP Blower Motor (for 60 Hz Models Only) For models mfd. prior to July 20, 1992 7.5 HP Blower Motor (for 50 Hz Models Only) For models mfd. prior to July 20, 1992 Blower Motor Slide Base 3/8-16 x 1” Hex Head Machine Bolt
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADS-200 Blower Assembly (continued)
47
for Steam Models ONLY
Illus. No. 6 7 8 9 10 11*
12 13
14 15
16 17 18 19 20 21 22 23**
24 25 26 27 28 29 30
Part No. Qty. Description 153005 153004 100706 101148 101195 101152 100142
4 4 1 1 1 1 2
100140
2
101194 101152 101175
1 1 1
101134
1
101148
1
100706 332703
1 1
332626
1
100706 880879 150617 153005 153004 100802 116014 880788
1 2 4 4 4 2 1 1
821229
1
150617 153005 153004 100612 117600 153050 152006
4 4 4 1 4 1 2
3/8” Lock Washer 3/8” Flat Washer 5/16” x 5/16” x 1-3/8” Key 2B x 4.0 Pulley (for 60 Hz models Only) 2B x 4.4 Pulley (for 50 Hz models Only) SH x 1-3/8” Bushing - 50/60 Hz BX-42 Cogged V-Belt (for models mfd. as of July 20, 1992) BX-38 Cogged V-Belt (for models mfd. prior to July 20, 1992) SDS x 1-3/8” Bushing - for models mfd. as of March 15, 1992 SH x 1-3/8” Bushing - for models mfd. prior to March 15, 1992 2B x 6.8 Pulley (for models mfd. as of July 20, 1992) 2B x 4.6 Pulley (for models mfd. between March 15, 1992 and July 20, 1992) 2B x 4.4 Pulley (for models mfd. prior to July 20, 1992) 5/16” x 5/16” x 1-3/8” Key AD-200 Squirrel Cage (Blower Wheel) Shaft (for models mfd. as of March 2, 1992) AD-200 Squirrel Cage (Blower Wheel) Shaft (for models mfd. prior to March 2, 1992) 5/16” x 5/16” x 1-3/8” Key 1-3/8” Idler Bearing with Set Screws and Grease Fitting 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer 1-3/8” Retaining Ring Felt Seal (3” x 3”) Motor Mount Assembly - for models mfd. as of March 2, 1992 (includes illus. nos. 23 and 28) Motor Mount Assembly - for models mfd. prior to March 2, 1992 (includes illus. nos. 23 and 28) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer 1-1/4” Bore x 15” Squirrel Cage (Blower Wheel) Noise Suppressor Tape (sold in feet) 1/2” Flat Washer 1/2-20 Left Hand Jam Nut
* Replace belts in matched sets (both belts). ** Specify color when ordering.
Telephone: (508) 678-9010
Fax: (508) 678-9447
48
American Dryer Corporation
ADG-200 Gas Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
49
ADG-200 Gas Burner Assembly Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11
141302 142711 150301 332605 142602 142584 142548 142711 150301 332604 140017 140018 142711 142548 141244 140840
1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 5
140839
5
140821
5
140820
5
150301 332606 141110 150301 150301 332607 150301 150301 331290 332597 --------150415 880943 880330 305410 150001 130401 151000 880789 880790
4 1 5 10 4 1 5 1 1 1 1 2 1 1 1 2 1 2 1 1
880791
1
880754* 332622 150309
1 1 6
12 13 14 15*
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32**
--33*** 34***
Description 1” Shut-Off Valve 1” Close Nipple #8-18 x 7/16” Phillips Pan Head TEK Screw Short Pipe Bracket 1” Union 1” x 4-1/2” Nipple 1” x 90° Elbow 1” Close Nipple #8-18 x 7/16” Phillips Pan Head TEK Screw Long Pipe Bracket 1” x 1” 24 VAC Gas Valve 1” 24 VAC Gas Valve L.P. Conversion Kit 1” Close Nipple 1” x 90° Elbow 5-Port Manifold #1 Burner Orifice (for Natural Gas models mfd. as of March 2, 1992) #2 Burner Orifice (for Natural Gas models mfd. prior to March 2, 1992) #28 Burner Orifice (for L.P. Gas models mfd. as of March 2, 1992) #29 Burner Orifice (for L.P. Gas models mfd. prior to March 2, 1992) #8-18 x 7/16” Phillips Pan Head TEK Screw Manifold Rest Burner Tube #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Burner Tube Rest #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Sight Hole Disc Burner Box Cover Plate Sail Switch (refer to Sail Switch Assembly on page 51) #10-16 x 1/2” Phillips Round Head Crimptite Screw Ignitor/Flame Probe Assembly Kit DSI Ignitor HV (High Voltage) Wire/Connector ONLY DSI (Direct Spark Ignition) Gap Feeler Gauge #6-32 x 1/2” Round Head Machine Screw 330° High Limit ONLY #6-32 Pal Nut ADG-200 Burner Box ONLY ADG-200 Natural Gas Burner Box Assembly Complete less Orifices (includes illus. nos. 1 through 14 and 16 through 32) ADG-200 L.P. Gas Burner Box Assembly Complete less Orifices (includes illus. nos. 1 through 14 and 16 through 34) ADG-200 DSI L.P. Conversion Kit ADG-200 Burner (Left Side) Baffle/Cover #10-16 x 1/2” Hex Head TEK Crimptite Screw
* Contact factory for elevations over 2,000 feet. ** Orifices are not included and must be ordered separately. *** For use on models with L.P. Gas ONLY.
Telephone: (508) 678-9010
Fax: (508) 678-9447
50
DSI Module Assembly for Gas Models ONLY
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8
880815 820100 121400 150522 150301 153010 152000 120102
1 1 3 3 1 4 4 2
Description ADC DSI (Direct Spark Ignition) Module ONLY - 50/60 Hz ADG-200 DSI Module Mount Assembly ONLY Universal Bushing 1/4-20 x 1/2” Hex Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw #6 Star Washer #6-32 Hex Nut 3/8” Straight x 1/2” Knock-Out Connector
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
51
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1 2 3 4
105500 332689 154002 802800
1 1 1 1
880793
1
150300 150303 122200 802799 150415 154004
2 2 1 1 2 1
5 6 7 8 9 10
Telephone: (508) 678-9010
Description Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push-on Fastener Sail Switch Box with Cover and Bracket ONLY (includes illus. nos. 4 and 8) Sail Switch Box Assembly Complete (includes illus. nos. 1 through 4 and 6 through 10) #10 x 1/2” Hex Washer TEK Screw #4 x 3/4" Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Box Cover and Bracket ONLY #10-16 x 1/2” Phillips Round Head Crimptite Screw Twin Speed Nut
Fax: (508) 678-9447
52
American Dryer Corporation
ADS-200 Steam Coil Assembly
88 Currant Road / Fall River, MA 02720-4781
ADS-200 Steam Coil Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
165020 150523 152002 153007 820321 880792
1 6 4 4 2 1
7 8 9 10 11
153007 152002 115995 102305 151008 151007
12
152030 152007
13
100525 100502
14 15 16
152002 153007 100526 100500
17
105609 100472
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
143115 100472 100496 143238 100498 150002 330987 153010 152000 153007 152002 100520 153238 143264 143219 143153 143115
53
Description
ADS-200 Steam Coil Assembly 1/4-20 x 3/4 Hex Head Machine Bolt 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 6, 9, and 10) 4 1/4” Lock Washer 4 1/4-20 Hex Nut 108 Steam Damper Gasket (sold by the inch) 1 Steam Damper Foam (68-1/2 length) 1 5/8-18 Stainless Steel Acorn Nut (for models mfd. as of March 15, 1992) 1 7/16-20 Stainless Steel Acorn Nut (for models mfd. prior to March 15, 1992) 1 5/8-18 Jam Nut (for models mfd. as of March 15, 1992) 1 7/16-20 Jam Nut (for models mfd. prior to March 15, 1992) 1 2” x 4” Stroke Piston (for models mfd. as of March 15, 1992) 1 1-1/2” x 4” Stroke Piston (for models mfd. prior to March 15, 1992) 4 1/4-20 Hex Nut 4 1/4” Lock Washer 1 Piston Support (for models mfd. as of March 15, 1992) 1 Piston Support (for models mfd. prior to March 15, 1992) 1 1/4” Poly x 1/4” M.P.T. Connector (for models mfd. as of March 15, 1992) 1 1/4” Poly x 1/8” M.P.T. Connector (for models mfd. prior to March 15, 1992) 1 1/4” Poly Tubing (sold by the foot) 1 1/4” Poly x 1/8” M.P.T. Connector 1 1/8” Needle Valve 1 1/8” Brass Closed Nipple 1 3-Way Micro Valve 2 #6-32 x 1” Phillips Round Head Machine Screw 1 Micro Valve Support Bracket 2 #6 Star Washer 2 #6-32 Hex Nut 2 1/4” Lock Washer 2 1/4-20 Hex Nut 1 1/8” N.P.T. Silencer (muffler) 1 1/8” Brass Closed Nipple 1 1/4” x 1/8” Reducing Bushing 1 1/4” Brass Tee 1 1/4” Poly x 1/4” M.P.T. Elbow 1 1/4” Poly Tubing (sold by the foot)
Telephone: (508) 678-9010
Fax: (508) 678-9447
54
American Dryer Corporation
Sprinkler Control Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
Sprinkler Control Panel Assembly
Illus. No. 1 2
Part No. Qty.
3 4 5 6 7 8 9 10 11 12 13
334259 132091 132092 132006 132078 153000 150108 122424 131408 150103 131405 131409 150108 153000 333002 881249
1 1 1 1 1 4 4 1 2 3 2 2 2 2 1 1
14
128964 881251
1 1
881250 120768 150415 120766 120758 120754 136039 136033 120756 120761 120750 120765 136050 136057 120999 120721
1 2 1 7 1 1 1 1 4 1 1 2 2 * 2
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
55
Description Sprinkler Electrical Panel 208/240 Volt Transformer 380 Volt Transformer 416 Volt Transformer 480 Volt Transformer #8 Flat Washer #8-32 x 3/4" Phillips Head Machine Screw “POWER WARNING” Caution Label Relay Socket #8-32 x 3/4" Phillips Head Machine Screw DPDT (Double-Pole-Double-Throw) Plug In Relay Hold Down Spring #8-32 x 1/2" Phillips Head Machine Screw #8 Steel Burr Temperature Controller Mounting Bracket Sprinkler Digital Temperature Control Assembly Complete with Harnesses (includes illus. nos. 13 through 15) Sprinkler Digital Temperature Control Sprinkler Temperature Control RTD (Resistive Temperature Device) Harness Sprinkler Temperature Control Power Harness Din Mounting Rail (sold by the inch) #10-16 x 1/2" Phillips Head Crimptite Screw End Section Feed Thru Terminal Block Fuse Terminal Block with LED 250 mA (Slo Blo) Fuse 3-Amp Fuse 1/4" Fuse Terminal Block with LED 4-Position Feed Thru Terminal Block Ground Terminal Block End Stop 1-Amp (Slo Blo) Fuse - for 208/240 Volt Models 1/2-Amp (Slo Blo) Fuse - for 380-460 Volt Models Blank Marking Tab Disconnect Fuse Block
* As required.
Telephone: (508) 678-9010
Fax: (508) 678-9447
56
American Dryer Corporation
Sprinkler Piping Assembly
88 Currant Road / Fall River, MA 02720-4781
57
Sprinkler Piping Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
32
33 34 35 36 37 38 39
Part No. Qty. 140927 142926 142548 154350 150415 332941 153007 153002 150523 331877 142581 142508 154350 150415 332941 153007 153002 142711 142548 142581 142548 142724 142602 142548 142581 150415 153002 153007 821640 154350 100565
5 5 1 1 4 1 2 2 2 1 4 4 1 4 1 2 2 1 1 4 1 2 1 1 1 4 2 2 1 1 1
881414
1
143277
1
143210
1
142581 150415 153002 153007 821640 154350 143556
1 4 2 2 1 1 1
Telephone: (508) 678-9010
Description 1/4” Sprinkler Nozzle 1” x 1/4” Reducing Bushing 1” x 90° Elbow 1” Pipe U-Bolt #10-16 x 1/2” Phillips Head Crimptite Screw Inner Pipe Bracket 1/4” Lock Washer 1/4-20 Hex Nut 1/4-20 x 3/4” Hex Washer Machine Bolt Temperature Sensor Mounting Plate 1” x 5” Nipple 1” Tee 1” Pipe U-Bolt #10-16 x 1/2” Phillips Head Crimptite Screw Inner Pipe Bracket 1/4” Lock Washer 1/4-20 Hex Nut 1” Close Nipple 1” x 90° Elbow 1” x 5” Nipple 1” x 90° Elbow 1” x 2” Nipple 1” Union 1” x 90° Elbow 1” x 5” Nipple #10-16 x 1/2” Phillips Head Crimptite Screw 1/4-20 Hex Nut 1/4” Lock Washer Top Pipe Bracket 1” Pipe U-Bolt 1” Air Operated Sprinkler Valve (for models mfd. as of July 22, 1996) 1” Air Operated Sprinkler Valve (replaces Part No. 100557) Used on models mfd. prior to July 22, 1996 (includes illus. nos. 31 and 32) 1/4” Compression Fitting x 1/8” M.P.T. Elbow (for models mfd. as of July 22, 1996) 1/4” Compression Fitting x 1/4” M.P.T. Elbow (for models mfd. prior to July 22, 1996) 1” x 5” Nipple #10-16 x 1/2” Phillips Head Crimptite Screw 1/4-20 Hex Nut 1/4” Lock Washer Top Pipe Bracket 1” Pipe U-Bolt 1” Ball Valve
Fax: (508) 678-9447
58
Illus. No.
Sprinkler Temperature Probe Junction Box Assembly
Part No. Qty.
1 2 3
331877 150523 881227
1 2 1
4 5 6 7 8 9
143296 120652 120915 120914 122736 881228
1 1 1 1 3 1
10 11 12 13 14 15 16 17 18
152000 120703 122427 150008 122736 120914 120915 120650 881229
2 1 1 2 3 1 1 1 1
Description Temperature Sensor Mounting Plate 1/4-20 x 3/4" Hex Washer Machine Bolt RTD (Resistive Temperature Device) Temperature Probe Assembly (includes illus. nos. 3, 4, and 8) 1/4" Compression Fitting 1/2" N.P.T. Cord Grip (Red) 1/2" N.P.T. Lock Nut 1/2" Metal "O" Ring Yellow Ferrule Sprinkler Temperature Probe Box Assembly (includes illus. nos. 9 and 12) #6-32 Hex Nut 6-Position Terminal Block “!” Caution Label #6-32 x 1-1/4" Phillips Round Head Machine Screw Yellow Ferrule 1/2" Metal "O" Ring 1/2" N.P.T. Lock Nut 1/2" N.P.T. Cord Grip (White) Sprinkler Temperature Probe Harness
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
59
Pneumatic Assembly 2 AUTOMATIC DOORS
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Part No. Qty. 143115 100472 100468 100520 143268 143238 100520 143268 143238 143237 143238 143250 100468 100472 143115 150002 100520 100498 143115 143149 150522 330987 153010 152000
2 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 2 1 2 2
Telephone: (508) 678-9010
Description 1/4" Poly Flow Tubing (sold by the foot) 1/4" Poly x 1/8" M.P.T. Connector 4-Way Valve - 24 VAC 1/8" Muffler 1/8" Brass Street Elbow 1/8" Close Nipple 1/8" Muffler 1/8" Brass Street Elbow 1/8" Close Nipple 1/8" Brass Cross 1/8" Close Nipple 1/8" Brass Plug 4-Way Valve - 24 VAC 1/4" Poly x 1/8" M.P.T. Connector 1/4" Poly Flow Tubing (sold by the foot) #6-32 x 1" Phillips Round Head Machine Screw 1/8" Muffler 3-Way Valve 24 Volt 1/4" Poly Flow Tubing 1/4" Poly x 1/8" M.P.T. Connector Elbow 1/4-20 x 1/2" Hex Washer TEK Screw Valve Mounting Bracket #6 Star Washer #6-32 Hex Nut
Fax: (508) 678-9447
60
AD-200 Air Jet Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
332770 143287 143259 332531 143100 143152 152014 150002 100520 100498 100472 143110 153010 152000 150415 330987
1 1 1 1 1 1 2 1 1 1 1 10 2 2 2 1
Description Air Jet Tube 1/4” x 1/8” M.P.T. Tee 1/4” Compression x 1/8” F.P.T. Bulkhead Fitting Air Jet Mounting Plate 1/4” Dia. Aluminum Tube (sold by the foot) 1/4” Compression x 1/8” M.P.T. Straight Connector 1/4-20 Free Spin Wash Nut #6-32 x 1” Phillips Round Head Machine Screw 1/8” N.P.T. Silencer/Muffler 3-Way Micro Valve 1/4” Poly x 1/8” M.P.T. Connector 1/4” Poly Flow Tubing (sold by the foot) #6 Star Washer #6-32 Hex Nut #10-16 x 1/2” Phillips Round Head Crimptite Screw Micro Valve Support Bracket
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Filter/Regulator/Lubricator Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
821639 150512 153007 100516 143241 143220 143283 143290 143120 100482 143283 100556 153018 153007 150524 143151 150522
1 2 2 1 1 1 1 1 1 1 1 1 4 2 2 1 2
Telephone: (508) 678-9010
61
Description Sprinkler Pneumatic Mount Weldment 1/4-20 x 1/2” Hex Head Machine Bolt 1/4” Lock Washer Filter/Regulator/Lubricator (F/R/L) Gauge 3/8” Close Nipple 3/8” Tee 3/8” Poly x 3/8” M.P.T. Connector 1/4” Poly x 3/8” M.P.T. Elbow 3/8” Poly Flow Tubing (sold by the foot) 3/8” Silencer 3/8” Poly x 3/8” M.P.T. Connector 3-Way/2 Position/ 3 Port Sprinkler Solenoid 1/4” Flat Washer 1/4” Lock Washer 1/4-20 x 2” Hex Head Bolt 1/4” Compression x 3/8” M.P.T. Elbow 1/4-20 x 1/2" Hex Washer TEK Screw
Fax: (508) 678-9447
62
Illus. No. 1 2 3 4* 5 6 7* 8 9 10 11 12
End of Cycle Light Assembly
Part No. Qty. 151001 150415 150108 821480 152001 153012 332850 150108 123222 123221 151001 150108
2 4 2 1 4 4 1 2 1 1 2 4
Description #8-32 Pal Nut 10-16 x 1/2” Phillips Round Head Crimptite Screw #8-32 x 1/2” Phillips Pan Head Machine Screw Cycle Light Bracket (for Steam Models ONLY) #8-32 Hex Nut #8 Star Washer Cycle Light Bracket (for Gas Models ONLY) #8-32 x 1/2” Phillips Pan Head Machine Screw “ORANGE” Cycle Light Bulb - 24 VAC #8-32 Pal Nut #8-32 x 1/2” Phillips Pan Head Machine Screw
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-200 Rotational Sensor Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5
102102 154200 332750 824807 824806
1 1 1 1 1
Telephone: (508) 678-9010
63
Description Tumbler Sensor Magnet 5/32” Pop Rivet Rotational Sensor MountingBracket AD-200 Rotational Sensor Assembly AD-200 Rotational Sensor Harness
Fax: (508) 678-9447
64
Back Guard Assembly
Illus. No.
Part No.
Qty.
1* 2 3* 4 5
880794 150522 821204 150301 150522
1 4 1 2 1
Description AD-200 Back Cover Plate 1/4-20 x 1/2” Hex Washer Machine Bolt Belt Guard #8-18 x 7/16” Phillps Pan Head TEK Screw 1/4-20 x 1/2” Hex Washer Machine Bolt
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
65
AD-200 Overload/Contactor Chart
For Gas Models mfd. prior to October 2, 1995 For Steam Models mfd. prior to July 20, 1992 VOLTAGE
FUSE
QTY.
208 230 380 416 460
136027 136027 136024 136024 136024
3 3 3 3 3
FUSE BLOCK 136004 136004 136004 136004 136004
QTY. 1 1 1 1 1
BLOWER M OTOR BLOWER M OTOR QTY. QTY. VARISTOR QTY. OVERLOAD CONTACTOR 132439 1 132465 1 132437 1 132439 1 132465 1 132437 1 132435 1 132465 1 132437 1 132435 1 132465 1 132437 1 132435 1 132465 1 132437 1
For Steam Models mfd. between July 20, 1992 and October 19, 1995 VOLTAGE
FUSE
QTY.
208 230 380 416 460
136091 136091 136092 136093 136094
3 3 3 3 3
FUSE BLOCK 136090 136090 136090 136090 136090
QTY. 1 1 1 1 1
BLOWER M OTOR BLOWER M OTOR QTY. QTY. VARISTOR QTY. OVERLOAD CONTACTOR 132483 1 132480 1 132435 1 132483 1 132480 1 132435 1 132484 1 132481 1 132435 1 132484 1 132481 1 132435 1 132439 1 132465 1 132435 1
NOTE: For current Overload/Contactor information refer to page 24 thru page 27.
Telephone: (508) 678-9010
Fax: (508) 678-9447
66
American Dryer Corporation
208 V OLT 240 V OLT 380 V OLT 416 V OLT 460 V OLT 575 V OLT G AS M ODELS
132094
132095
132093
132096
132098
132097
STEAM M ODELS
132071
132072
132073
132074
132075
132076
881562
881563
881564
881565
881566
881567
FOR M ODELS M FD. AS OF
M ARCH 11, 1997
STEAM M ODELS TO
M ARCH 11, 1997
replaces Part No. 132095
replaces Part No. 132093
replaces Part No. 132096
replaces Part No. 132098
replaces Part No. 132097
NOTE: For AD-200 models with Manual Doors the transformer is located on the Left Panel Assembly For AD-200 models with Automatic Door the trandformer is located on the Right Panel Assembly.
Transformer Usage Chart
88 Currant Road / Fall River, MA 02720-4781
FOR M ODELS M FD. PRIOR
replaces Part No. 132094
67
ADC 450115 1- 11/09/92-100 2* 09/03/93-100 3-03/30/95-100 4* 04/18/97-100
Telephone: (508) 678-9010
Fax: (508) 678-9447
