Preview only show first 10 pages with watermark. For full document please download

Ad-30/ad-50 1987 Thru 1991 (p/n: 450096)

Rating
Date

September 2018
Size

1.3MB
Views

4,113
Categories

Home Domestic appliances Sewing & ironing Electric laundry dryers

Transcript

AD-30 / AD-50 Parts Manual 1987 thru 1991 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] 050492 ADC Part No. 450096 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents AD-30 High Security Control Door Assembly ......................................................................................... 4 AD-50 High Security Control Door Assembly ......................................................................................... 5 Phase 3 OPL Microprocessor Control Panel Assembly ....................................................................... 6, 7 Phase 3 OPL Microprocessor Control Box Assembly ......................................................................... 8, 9 Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly ................................................. 10 Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly ....................................................11 Phase 4 OPL Reversing Microprocessor Control Panel Assembly.......................................................... 12 Phase 4 OPL Reversing Microprocessor Control Box Assembly............................................................ 13 Phase 4 Single Coin Microprocessor Control Panel Assembly ............................................................... 14 Phase 4 Single Coin Microprocessor Control Box Assembly ................................................................. 15 Phase 4 Dual Coin Microprocessor Control Panel Assembly ................................................................. 16 Phase 4 Dual Coin Microprocessor Control Box Assembly ................................................................... 17 Phase 4.1 Single Coin Microprocessor Control Panel Assembly ............................................................ 18 Phase 4.1 Single Coin Microprocessor Control Box Assembly .............................................................. 19 Phase 4.1 Dual Coin Microprocessor Control Panel Assembly .............................................................. 20 Phase 4.1 Dual Coin Microprocessor Control Box Assembly ................................................................ 21 Dual Timer Control Panel Assembly ................................................................................................ 22, 23 Dual Timer Control Box Assembly .................................................................................................. 24, 25 Non-Microprocessor Coin Meter Control Panel Assembly .............................................................. 26, 27 Non-Microprocessor Coin Meter Control Box Assembly ................................................................ 28, 29 AD-30/AD-50 Coin Vault Assembly ..................................................................................................... 30 AD-30 Slide Meter Case Assembly ...................................................................................................... 31 AD-30 Slide Meter Control Box Assembly For Models Mfd. with Globar® Ignition ONLY .......................................................................... 32 AD-30 Slide Meter Control Box Assembly For Models Mfd. with Direct Spark Ignition (DSI) ONLY ........................................................ 33 AD-30/AD-50 Main Door Assembly For Door Magnet Type Models ONLY ...................................................................................... 34 AD-30 Front Panel Assembly For Door Magnet Type Models ONLY ...................................................................................... 35 AD-30/AD-50 Main Door Assembly For Door Latch Type Models ONLY .......................................................................................... 36 AD-50 Front Panel Assembly For Door Magnet Type Models ONLY ...................................................................................... 37 AD-30 Front Panel Assembly For Door Latch Type Models ONLY .......................................................................................... 38 AD-50 Front Panel Assembly For Door Latch Type Models ONLY .......................................................................................... 39 Plunger Type Main Door Switch Assembly ............................................................................................ 40 New Style (N.S.) Series Main Door Switch Assembly........................................................................... 41 AD-30 Basket (Tumbler)/Support Assemblies For Models Mfd. with Non-Tapered Ribs ONLY ...................................................................... 42 AD-50 Basket (Tumbler)/Support Assemblies For Models Mfd. with Non-Tapered Ribs ONLY ...................................................................... 43 AD-50 Basket (Tumbler)/Support Assemblies For Models Mfd. with Tapered Ribs ONLY ............................................................................... 44 AD-30 Drop Lint Door Assembly ......................................................................................................... 45 AD-50 Drop Lint Door Assembly ................................................................................................... 46, 47 AD-30 Lint Trap Assembly ................................................................................................................... 48 AD-50 Lint Trap Assembly ................................................................................................................... 49 AD-30 Basket (Tumbler) Bearing Assembly .................................................................................... 50, 51 AD-50 Basket (Tumbler) Bearing Assembly .................................................................................... 52, 53 AD-30/AD-50 Idler Bearing Assembly ........................................................................................... 54, 55 AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Non-Tapered Ribs ONLY ................................................................ 56, 57 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Non-Tapered Ribs ONLY ................................................................ 58, 59 AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Non-Tapered Ribs ONLY ................................................................ 60, 61 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Tapered Ribs ONLY......................................................................... 62, 63 AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Tapered Ribs ONLY ......................................................................... 64, 65 Sensor Bracket Assemblies ............................................................................................................. 66, 67 ADG-30 Standard Non-Hi/Lo Burner Assembly For Models Mfd. with Globar® Ignition ONLY .................................................................... 68, 69 ADG-50 Standard Non-Hi/Lo Burner Assembly For Models Mfd. with Globar® Ignition ONLY .................................................................... 70, 71 ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly For Models Mfd. with Globar® Ignition ONLY .................................................................... 72, 73 ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. with Direct Spark Ignition (DSI) ONLY .................................................. 74, 75 ADE-30/ADE-50 Electric Oven Assembly For Models Mfd. as of November 12, 1990 ......................................................................... 76, 77 ADE-30/ADE-50 Electric Oven Assembly For Models Mfd. prior to November 12, 1990 ..................................................................... 78, 79 ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies For Globar® Models and Direct Spark Ignition (DSI) Models ONLY ...................................... 80 ADG-30/ADG-50 Replacement Coils For 3/8” Non-Hi/Lo Gas Valve For Globar® Ignition Models ONLY .......................................................................................... 81 ADG-30/ADG-50 Replacement Coils For 3/8” Hi/Lo Gas Valve For Globar® Ignition Models ONLY ........................................................................................... 82 Microprocessor Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays .................. 83 Dual Timer Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays .................. 84 Microprocessor Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays ... 85 Dual Timer Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays ... 86 3-Phase (3Ø) Motor, Electric Relay Panel Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays ............................... 87 3-Phase (3Ø) Motor, Electric Relay Panel Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays .................. 88 Control/Heat Step Down Transformer For Globar® Models and High Pressure Motorized Steam Valve Models ONLY ................... 89 ADS-30 Steam Coil Damper Assembly .......................................................................................... 90, 91 ADS-50 Steam Coil Damper Assembly .......................................................................................... 92, 93 ADS-30/ADS-50 Steam Coil/Valve Assembly For Motorized Type and Solenoid Type Models ONLY ............................................................ 94 AD-30/AD-50 Outer Top/Back Guard Assemblies ............................................................................... 95 ADG-30/ADG-50 Heat Reclaimer Assembly ........................................................................................ 96 Relay Board Listing .............................................................................................................................. 97 Microprocessor Coin Acceptors Listing ................................................................................................ 98 Coin Meter Replacement Parts ............................................................................................................. 99 ADG-30/ADG-50 Globar® Burner Assembly Specifications ................................................................ 100 ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly Specifications ................................... 101 ADE-30/ADE-50 Electric Oven Component Application Charts For Models Mfd. as of November 12, 1990 ............................................................................. 102 ADE-30/ADE-50 Electric Oven Component Application Charts For Models Mfd. prior to November 12, 1990 ......................................................................... 103 Additional Parts Available ................................................................................................................... 104 4 AD-30 High Security Control Door Assembly Illus. No. Part No. Qty. 1 160015 1 160017 1 160104 160016 881053 870011 800023* 1 1 1 1 1 800140 1 180200 102307 150201 150309 102600 102601 102502 1 3 5 4 1 1 1 2 3 4 5 6 7 8 9 10 11 * Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit AD-30 High Security Control Door Assembly without Lock (includes illus. nos. 4 through 7) AD-30 Stainless Steel High Security Control Door Assembly without Lock (includes illus. nos. 4 through 7) AD-30 Top Gray Trim Strip with Lock Hole Trim Bumper Gasket (sold by the foot) #10-32 x 1/4” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 AD-50 High Security Control Door Assembly Illus. No. Part No. Qty. 1 160015 1 160017 1 4 160104 160032 881053 870011 800022* 1 1 1 1 1 5 6 7 8 9 10 11 180201 102307 150201 150309 102600 102601 102502 1 3 5 4 1 1 1 2 3 * Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit AD-50 High Security Control Door Assembly without Lock (includes illus. nos. 4 through 7) AD-50 Top Gray Trim Strip with Lock Hole Trim Bumper Gasket (sold by the foot) #10-32 x 1/4” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 6 American Dryer Corporation Phase 3 OPL Microprocessor Control Panel Assembly 88 Currant Road / Fall River, MA 02720-4781 7 Phase 3 OPL Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 1 1 112275 1 112277 1 112278 1 800057 800164 1 1 800161 1 800163 1 865088* 1 865089* 1 137092 137093 1 1 137094 137095 1 1 152001 882541 4 1 2 3 4 5 * Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only) ... Not Illustrated OPL Stick-On Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3 Language OPL Stick-On Labels (English, Spanish, and Hebrew) ... Not Illustrated 5 Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Microprocessor Controller (computer) Control Panel ONLY Microprocessor Controller (computer) Control Panel ONLY with Battery Bracket Phase 3 OPL Non-Reversing Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 3 OPL Non-Reversing Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5) Phase 3 OPL Reversing Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 3 OPL Reversing Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5) Phase 3 OPL Non-Reversing Microprocessor Controller (computer) ONLY Phase 3 OPL Non-Reversing Microprocessor Controller (computer) ONLY with Battery Clip Phase 3 OPL Reversing Microprocessor Controller (computer) ONLY Phase 3 OPL Reversing Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut Spring Turn Latch Assembly Used on dryer models with reversing option ONLY. IMPORTANT: Check label on computer chip to verify correct part number of microprocessor controller (computer). NOTE: OPL microprocessor controllers (computers) listed are suitable for ALL voltage applications. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 American Dryer Corporation Phase 3 OPL Microprocessor Control Box Assembly 88 Currant Road / Fall River, MA 02720-4781 9 Phase 3 OPL Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 137021 122800 137020 150315 137022 137013 --------- * 1 1 1 1 ** 1 7 137061 131916 1 *** 131930 *** 140150 136052 150309 131030 1 *** 2 1 131031 1 150002 120709 151000 2 1 2 8 9 10 11 12 13 14 Description Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool 15-Pin Microprocessor Connector ONLY #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only) P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only) Diode Logic Board (for gas models Only) 4-Amp Fuse ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 8-Position Terminal Strip #6-32 Pal Nut * Quantity required is 13 or 15 required. ** Quantity required is 4 or 8 required. *** Quantity required is 1 or 2 required. Telephone: (508) 678-9000 Fax: (508) 678-9447 10 Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 1 1 112275 1 112277 1 112278 1 800057 800164 1 1 800171 1 865095 1 137125 1 137126 1 152001 882541 4 1 2 3 4 5 Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only) ... Not Illustrated OPL Stick-On Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3 Language OPL Stick-On Labels (English, Spanish, and Hebrew) ... Not Illustrated 5 Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Microprocessor Controller (computer) Control Panel ONLY Microprocessor Controller (computer) Control Panel ONLY with Battery Bracket Phase 4 OPL Non-Reversing Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 4 OPL Non-Reversing Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5) Phase 4 OPL Non-Reversing Microprocessor Controller (computer) ONLY Phase 4 OPL Non-Reversing Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut Spring Turn Latch Assembly IMPORTANT: Check label on computer chip to verify correct part number of microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 137021 122800 137020 150315 137022 137013 --------- 12 1 1 1 1 4 1 8 9 137061 131916 131930 136057 136052 150300 141403 1 1 1 * * 2 1 10 11 150309 131030 2 1 131031 1 150002 120715 151000 136057 150301 136008 2 1 2 * * * 2 3 4 5 6 7 12 13 14 15 16 17 * 11 Description Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool 15-Pin Microprocessor Connector ONLY #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Solid State Relay (SSR) Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only) P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only) 1/2-Amp (slo blo) Fuse ONLY 4-Amp Fuse ONLY #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 12 Phase 4 OPL Reversing Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 1 1 112275 1 112277 1 112278 1 800057 800164 1 1 865092 1 865096 1 3 137127 137128 1 1 4 5 152001 882541 4 1 2 Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only) ... Not Illustrated OPL Stick-On Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3 Language OPL Stick-On Labels (English, Spanish, and Hebrew) ... Not Illustrated 5 Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Microprocessor Controller (computer) Control Panel ONLY Microprocessor Controller (computer) Control Panel ONLY with Battery Bracket Phase 4 OPL Reversing Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 4 OPL Reversing Control Panel Assembly Complete with Battery Option (includes illus. nos. 1 through 5) Phase 4 OPL Reversing Microprocessor Controller (computer) ONLY Phase 4 OPL Reversing Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut Spring Turn Latch Assembly IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4 OPL Reversing Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 137021 122800 137020 150315 137022 137013 --------- 12 1 1 1 1 4 1 8 9 137061 131930 136057 136052 150300 141403 1 1 * * 2 1 10 11 150309 131030 2 1 12 13 14 15 16 17 150002 120715 151000 136057 150301 136008 2 1 2 * * * 2 3 4 5 6 7 * 13 Description Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool 15-Pin Microprocessor Connector ONLY #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Solid State Relay (SSR) Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 220 volt models Only) 1/2-Amp (slo blo) Fuse ONLY 4-Amp Fuse ONLY #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 14 Phase 4 Single Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 800088 1 1 800168 1 800040 800039 150415 137110 137115 1 1 1 1 1 5 6 7 152001 153012 --------- 4 4 1 8 9 10 137056 137023 137021 865050 122800 1 1 3 1 1 3 4 -- Description Coin Keyboard Label Assembly Phase 4 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 4 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Phillips Round Head Crimptite Screw Phase 4 Coin Microprocessor Controller (computer) ONLY Phase 4 Coin Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut #8 Star Washer Microprocessor Single Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptors Listing on page 98) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4 Single Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 2 137020 137021 122800 150315 137022 137013 --------- 1 14 1 1 1 4 1 137061 131916 131930 136052 150309 131030 1 * * * 2 1 131031 1 150002 120709 151000 2 1 2 3 4 5 6 7 8 9 10 11 12 13 * 15 Description 15-Pin Microprocessor Connector ONLY Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only) P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only) 4-Amp Fuse ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 8-Position Terminal Strip #6-32 Pal Nut Quantity required is 1 or 2. Telephone: (508) 678-9000 Fax: (508) 678-9447 16 Phase 4 Dual Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 800088 1 1 800168 1 800040 800039 150309 137110 137115 1 1 1 1 1 5 6 7 152001 153012 --------- 2 2 1 8 9 10 137056 137023 137021 865050 122800 1 1 3 1 1 3 4 Description Coin Keyboard Label Assembly Phase 4 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 4 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 4 Coin Microprocessor Controller (computer) ONLY Phase 4 Coin Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut #8 Star Washer Microprocessor Dual Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptors Listing on page 98) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4 Dual Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 2 137020 137021 122800 150315 137022 137013 --------- 1 15 1 1 1 4 1 137061 131916 131930 136052 150309 131030 1 * * * 2 1 131031 1 150002 120709 151000 2 1 2 3 4 5 6 7 8 9 10 11 12 13 * 17 Description 15-Pin Microprocessor Connector ONLY Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only) P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only) 4-Amp Fuse ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 8-Position Terminal Strip #6-32 Pal Nut Quantity required is 1 or 2. Telephone: (508) 678-9000 Fax: (508) 678-9447 18 Phase 4.1 Single Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 865098 1 1 865099 1 800040 800039 150415 137130 137131 1 1 1 1 1 5 6 7 152001 153012 --------- 4 4 1 8 9 10 ----- 137056 137023 137021 865050 122800 1 1 3 1 1 3 4 Description Coin Keyboard Label Assembly Phase 4.1 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 4.1 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Phillips Round Head Crimptite Screw Phase 4.1 Coin Microprocessor Controller (computer) ONLY Phase 4.1 Coin Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut #8 Star Washer Microprocessor Single Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptors Listing on page 98) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4.1 Single Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 137021 122800 137020 150315 137022 137013 --------- 12 1 1 1 1 4 1 8 9 137061 131916 131930 136057 136052 150300 141403 1 1 1 * * 2 1 10 11 150309 131030 2 1 131031 1 150002 120715 151000 136057 150301 136008 2 1 2 * * * 2 3 4 5 6 7 12 13 14 15 16 17 * 19 Description Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool 15-Pin Microprocessor Connector ONLY #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only) P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only) 1/2-Amp (slo blo) Fuse ONLY 4-Amp Fuse ONLY #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 20 Phase 4.1 Dual Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 865098 1 1 865099 1 800040 800039 150309 137130 137131 1 1 1 1 1 5 6 7 152001 153012 --------- 2 2 1 8 9 10 137056 137023 137021 865051 122800 1 1 3 1 1 3 4 Description Coin Keyboard Label Assembly Phase 4.1 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 4.1 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 4.1 Coin Microprocessor Controller (computer) ONLY Phase 4.1 Coin Microprocessor Controller (computer) ONLY with Battery Clip #8-32 Hex Nut #8 Star Washer Microprocessor Dual Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptors Listing on page 98) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 4.1 Dual Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 137021 122800 137020 150315 137022 137013 --------- 12 1 1 1 1 4 1 8 9 137061 131916 131930 136057 136052 150300 141403 1 1 1 * * 2 1 10 11 150309 131030 2 1 131031 1 150002 120715 151000 136057 150301 136008 2 1 2 * * * 2 3 4 5 6 7 12 13 14 15 16 17 * 21 Description Microprocessor Socket ONLY Microprocessor (female) Pin Extraction Tool 15-Pin Microprocessor Connector ONLY #6 x 3/8” Phillips Pan Head Screw 15-Pin Strain Relief ONLY Nylon Standoff Arc Suppressor (A.S.) Relay Board (refer to Relay Board Listing on page 97) Arc Suppressor (A.S.) Board ONLY without Relays P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only) P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only) 1/2-Amp (slo blo) Fuse ONLY 4-Amp Fuse ONLY #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 22 American Dryer Corporation Dual Timer Control Panel Assembly 88 Currant Road / Fall River, MA 02720-4781 Dual Timer Control Panel Assembly Illus. No. Part No. Qty. 1 123000 123001 122400 865550 1 1 1 1 865551 1 800051 131812 131813 150207 154001 152013 153010 120713 1 1 1 2 2 2 2 1 120708 1 150002 150110 150001 131030 131031 151000 112050 882541 124103 124020 124021 124022 124023 122602 122700 122801 2 4 2 1 1 2 1 1 2 1 1 1 1 1 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 --- Telephone: (508) 678-9000 23 Description Red Indicator Light (for 120 volt models Only) Red Indicator Light (for 230 volt models Only) Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete (includes illus. nos. 1 through 21) For 120 Volt Models ONLY Dual Timer Control Panel Assembly Complete (includes illus. nos. 1 through 21) For 230 Volt Models ONLY Dual Timer Control Panel ONLY Push To Start Relay (for 120 volt models Only) Push To Start Relay (for 230 volt models Only) #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 18-Position Terminal Block (for models mfd. as of May 3, 1989) 3-Position Terminal Strip (for models mfd. prior to May 3, 1989) #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay (for 120 volt models Only) Dual Timer Relay (for 230 volt models Only) #6-32 Pal Nut Dual Timer Label ONLY Spring Turn Latch Assembly Arrow Timer Knob 60 Minute Timer (for 120 volt models Only) 60 Minute Timer (for 230 volt models Only) 15 Minute Timer (for 120 volt models Only) 15 Minute Timer (for 230 volt models Only) 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Fax: (508) 678-9447 24 American Dryer Corporation Dual Timer Control Box Assembly 88 Currant Road / Fall River, MA 02720-4781 25 Dual Timer Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 122603 122701 122801 315010 150300 150300 141403 1 9 1 1 2 2 1 7 8 150309 131030 2 1 131031 1 131814 150309 136008 875250 136057 136052 136054 136056 150301 136002 136052 136054 136056 150002 120715 120709 151000 1 2 * * ** ** ** ** * 2 ** ** ** 2 1 1 2 9 10 11 12* 13 14 15* 16 17 18 Description 9-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 230 Volt Models ONLY Motor Control Relay (for 120 volt controls Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Fuse Block/Strip ONLY In-Line Fuse Holder Assembly ONLY 1/2-Amp (slo blo) Fuse ONLY 4-Amp Fuse ONLY 15-Amp (slo blo) Fuse 20-Amp (slo blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Panel Mount Fuse Holder Assembly 4-Amp Fuse ONLY 15-Amp (slo blo) Fuse 20-Amp (slo blo) Fuse #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block 8-Position Terminal Strip #6-32 Pal Nut * As required. ** Check fuse rating for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 26 Non-Microprocessor Coin Meter Control Panel Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 27 Non-Microprocessor Coin Meter Control Panel Assembly Illus. No. Part No. Qty. 1 123000 123001 122400 800070 1 1 1 1 800071 1 800054 800052 131812 131813 150207 154001 125000 125003 150303 120712 1 1 1 1 2 2 1 1 2 1 120707 1 882541 122602 122700 122801 1 1 9 1 2 3 4 5 6 7* 8 9 10 11 12 --* Description Red Indicator Light (for 120 volt models Only) Red Indicator Light (for 230 volt models Only) Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete (includes illus. nos. 1 through 6 and 8 through 12) For 120 Volt Models ONLY Coin Meter Control Panel Assembly Complete (includes illus. nos. 1 through 6 and 8 through 12) For 230 Volt Models ONLY Coin Meter Control Panel (for 12-position terminal block Only) Coin Meter Control Panel (for 2-position terminal strip Only) Push To Start Relay (for 120 volt models Only) Push To Start Relay (for 230 volt models Only) #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter (specify timing) For 120 Volt Models ONLY 25¢ Coin Meter (specify timing) For 230 Volt Models ONLY #4 x 3/4” Phillips Pan Head “A” Machine Screw 12-Position Terminal Block (for models mfd. as of May 15, 1989) 2-Position Terminal Strip (for models mfd. prior to May 15, 1989) Spring Turn Latch Assembly 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Consult factory for coin meters not listed. NOTE: For Coin Meter Replacement Parts refer to page 99. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Non-Microprocessor Coin Meter Control Box Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 29 Non-Microprocessor Coin Meter Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 122603 122701 122801 315010 150300 150300 141403 1 9 1 1 2 2 1 7 8 150309 131030 2 1 131031 1 131814 150309 136008 875250 136057 136052 136054 136056 150301 136002 136052 136054 136056 150002 120715 120709 151000 1 2 * * ** ** ** ** * 2 ** ** ** 2 1 1 2 9 10 11 12* 13 14 15* 16 17 18 Description 9-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for high pressure steam models Only) For 120 Volt Models ONLY Steam Valve Relay (for high pressure steam models Only) For 208/230 Volt Models ONLY Motor Control Relay (for 120 volt controls Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Fuse Block/Strip ONLY In-Line Fuse Holder Assembly ONLY 1/2-Amp (slo blo) Fuse ONLY 4-Amp Fuse ONLY 15-Amp (slo blo) Fuse 20-Amp (slo blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Panel Mount Fuse Holder Assembly 4-Amp Fuse ONLY 15-Amp (slo blo) Fuse 20-Amp (slo blo) Fuse #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block 8-Position Terminal Strip #6-32 Pal Nut * As required. ** Check fuse rating for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 AD-30/AD-50 Coin Vault Assembly Illus. No. Part No. Qty. 1 802112 1 802117 802110 1 1 4 802115 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 9 802019 125915 802018 152014 102502 102601 102600 1 1 1 4 1 1 1 2 3 * Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Face Plate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Face Plate ONLY 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Support Catch Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 31 AD-30 Slide Meter Case Assembly Illus. No. * Part No. Qty. 1* 2 3 4 5 6 7 160199 160099 125908 152014 125900 154203 801700 1 1 1 4 1 6 1 8 9 10 11 12 13 14 15 16 17 315404 ----------------801701 102502 102601 102600 122400 123005 131812 1 1 1 1 1 1 1 1 1 1 Description Key ONLY for Slide Meter Lock Lock, Key, Cam, and Hardware Slide Meter Accumulator - 120 Volt 1/4-20 Free Spin Wash Nut Slide Meter Case ONLY with Door Less Lock 1/4” Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 7 and 8) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Support Catch Rocker Heat Selector Switch Red Indicator Light (for 120 volt models Only) Push To Start Relay (for 120 volt models Only) Specify key number when ordering. IMPORTANT: Parts listed are for 120 volt controls ONLY...for other voltages contact factory. Telephone: (508) 678-9000 Fax: (508) 678-9447 32 AD-30 Slide Meter Control Box Assembly For Models Mfd. with Globar® Ignition ONLY Illus. No. Part No. Qty. 1 2 150300 311913 311921 150309 132002 151000 120709 150002 136052 875250 150309 131814 2 1 1 2 1 2 1 2 1 1 2 1 3 4 5 6 7 8 9 10 11 American Dryer Corporation Description #10-16 x 1/2” Hex Washer TEK Screw Service Box Cover Plate ONLY (9-7/8” x 4-3/8”) Service Box Cover Plate ONLY (9-7/8” x 5-3/4”) #10-16 x 1/2” Hex Head TEK Crimptite Screw 200 Watt Transformer (terminals are not included) #6-32 Pal Nut 8-Position Terminal Strip #6-32 x 1” Phillips Round Head Machine Screw 4-Amp Fuse ONLY In-Line Fuse Holder Assembly ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Motor Control Relay (for 120 volt controls Only) 88 Currant Road / Fall River, MA 02720-4781 33 AD-30 Slide Meter Control Box Assembly For Models Mfd. with Direct Spark Ignition (DSI) ONLY Illus. No. Part No. Qty. 1 2 150300 311913 311921 150300 141403 2 1 1 2 1 151000 120715 150002 150309 131814 136008 875250 136057 136054 136056 150301 2 1 2 2 1 * * ** ** ** * 3 4 5 6 7 8 9 10 11* 12* Description #10-16 x 1/2” Hex Washer TEK Screw Service Box Cover Plate ONLY (9-7/8” x 4-3/8”) Service Box Cover Plate ONLY (9-7/8” x 5-3/4”) #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models with Direct Spark Ignition [DSI] Only) #6-32 Pal Nut 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Motor Control Relay (for 120 volt contols Only) Fuse Block/Strip ONLY In-Line Fuse Holder Assembly ONLY 1/2-Amp (slo blo) Fuse ONLY 15-Amp Fuse (for 120 volt models Only) 20-Amp (slo blo) Fuse (for 208/230 volt models Only) #8-18 x 7/16” Phillips Pan Head TEK Screw * As required. ** Check fuse rating for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 34 AD-30/AD-50 Main Door Assembly For Door Magnet Type Models ONLY Illus. No. Part No. Qty. 1 800136 1 800133 1 800134 1 2 3 4 5 6 7 8 9 10 11 12 13 103050 150410 152014 102350 102210 150002 102105 152013 306802 102102 150410 800131 1 4 4 1 1 2 2 2 6 4 4 2 --- 170730 1 American Dryer Corporation Description AD-30/AD-50 Main Door Assembly Complete (includes illus. nos. 1 through 12) AD-30/AD-50 Main Door Assembly Less Accessories (includes illus. nos. 1 through 3) AD-30/AD-50 Main Door with Glass and Gasket ONLY (includes illus. nos. 1, 2, 3, 5, and 6) 12-1/2” Stainless Steel Main Door Hinge #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass #6-32 x 1” Phillips Round Head Machine Screw Magnet Holder ONLY #6-32 Hex Nut Magnet Keeper 0.215 Door Magnet #10-24 x 3/8” Phillips Pan Head Taptite Screw Cast Aluminum Magnet Holder Assembly Complete (includes illus. nos. 7 through 11) Main Door Glass Adhesive (10.3 oz. cartridge) 88 Currant Road / Fall River, MA 02720-4781 AD-30 Front Panel Assembly 35 For Door Magnet Type Models ONLY Illus. No. Part No. Qty. 1 800369* 1 800366* 1 800383 1 170340 154200 121405 150309 150300 150201 --------- 2 4 1 8 1 2 1 2 3 4 5 6 7 8 * Description AD-30 Right Hand Front Panel (magnet type) Assembly Complete (includes illus. nos. 1 through 4) AD-30 Right Hand Insulated Front Panel (magnet type) Assembly Complete (includes illus. nos. 1 through 4) AD-30 Stainless Steel Right Hand Front Panel (magnet type) Assembly Complete (includes illus. nos. 1 through 4) 3-1/2” Stainless Steel Striker Pad 5/32” Pop Rivet Rubber Grommet #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Washer TEK Screw #10-32 x 1/4” Phillips Pan Head TEK Screw Main Door Switch (refer to Plunger Type Main Door Switch Assembly on page 40) Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 36 AD-30/AD-50 Main Door Assembly For Door Latch Type Models ONLY Illus. No. Part No. Qty. 1 881421 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 1 4 4 1 1 1 4 4 1 7 8 9 American Dryer Corporation Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with Four (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) Door Glass (nylon) Spacer 1/2” Stainless Steel Flat Head Allen Screw Main Door Latch Screw (#10 x 7/16” dome hex head screw) 88 Currant Road / Fall River, MA 02720-4781 AD-50 Front Panel Assembly 37 For Door Magnet Type Models ONLY Illus. No. Part No. Qty. 1 800368* 1 800371* 1 800388 1 170340 154200 121405 150309 150300 150201 --------- 2 4 1 8 1 2 1 2 3 4 5 6 7 8 * Description AD-50 Right Hand Front Panel (magnet type) Assembly Complete (includes illus. nos. 1 through 4) AD-50 Right Hand Insulated Front Panel (magnet type) Assembly Complete (includes illus. nos. 1 through 4) AD-50 Stainless Steel Right Hand Front Panel (magnet type) Assembly Complete (includes illus. nos. 1 through 4) 3-1/2” Stainless Steel Striker Pad 5/32” Pop Rivet Rubber Grommet #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Washer TEK Screw #10-32 x 1/4” Phillips Pan Head TEK Screw Main Door Switch (refer to Plunger Type Main Door Switch Assembly on page 40) Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 38 AD-30 Front Panel Assembly For Door Latch Type Models ONLY Illus. No. Part No. Qty. 1 875300* 1 875311 1 154215 170330 150300 150309 121405 150201 --------- 2 1 1 8 1 2 1 2 3 4 5 6 7 8 * Description AD-30 Right Hand Insulated Front Panel (latch type) Assembly Complete (includes illus. nos. 1, 2, 3, and 6) AD-30 Stainless Steel Right Hand Insulated Front Panel (latch type) Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 5/32” Pop Rivet Friction Door Catch #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet #10-32 x 1/4” Phillips Pan Head TEK Screw New Style (N.S.) Series Main Door Switch (for microprocessor models mfd. as of November 21, 1990 and non-microprocessor models mfd. as of November 15, 1990) Refer to New Style (N.S.) Series Main Door Switch Assembly on page 41 Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 39 AD-50 Front Panel Assembly For Door Latch Type Models ONLY Illus. No. Part No. Qty. 1 875301* 1 875312 1 154215 170330 150300 150309 121405 150201 --------- 2 1 1 8 1 2 1 2 3 4 5 6 7 8 * Description AD-50 Right Hand Insulated Front Panel (latch type) Assembly Complete (includes illus. nos. 1, 2, 3, and 6) AD-50 Stainless Steel Right Hand Insulated Front Panel (latch type) Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 5/32” Pop Rivet Friction Door Catch #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet #10-32 x 1/4” Phillips Pan Head TEK Screw New Style (N.S.) Series Main Door Switch (for microprocessor models mfd. as of November 21, 1990 and non-microprocessor models mfd. as of November 15, 1990) Refer to New Style (N.S.) Series Main Door Switch Assembly on page 41 Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 40 Plunger Type Main Door Switch Assembly Illus. No. Part No. Qty. 1 137003 1 2 3 401551 870010 * 1 4 313209 152003 1 1 * Description Plunger Type Main Door Switch ONLY (includes illus. nos. 1, 2, and 4) Door Switch Spacer Washer Plunger Type Main Door Switch Assembly Complete (includes illus. nos. 1 through 4) For Microprocessor Models Mfd. prior to November 21, 1990 and Non-Microprocessor Models Mfd. prior to November 15, 1990 Main Door Switch Housing ONLY 3/8-32 x 1/2” Door Switch Nut As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 41 New Style (N.S.) Series Main Door Switch Assembly Illus. No. Part No. Qty. 1 2 312215 800445* 1 1 880446* 1 313217 150025 153045 137004 153045 152016 1 2 2 ** 2 2 3 4 5* 6 7 Description Door Switch Actuator Arm New Style (N.S.) Series Microprocessor Main Door Switch Housing Assembly Complete (includes illus. nos. 1 through 7) For Models Mfd. as of November 21, 1990 New Style (N.S.) Series Non-Microprocessor Main Door Switch Housing Assembly Complete (includes illus. nos. 1 through 7) For Models Mfd. as of November 15, 1990 Main Door Switch Housing ONLY #4-40 x 1” Phillips Pan Head Machine Screw #4 Lock Washer New Style (N.S.) Series Main Door Switch ONLY #4 Lock Washer #4-40 Hex Nut * Microprocessor controller (computer) models require two (2) New Style (N.S.) series door switches. Non-microprocessor controller (non-computer) models require one (1) New Style (N.S.) series door switch. ** Quantity is 1 or 2. Telephone: (508) 678-9000 Fax: (508) 678-9447 42 AD-30 Basket (Tumbler)/Support Assemblies For Models Mfd. with Non-Tapered Ribs ONLY Illus. No. Part No. Qty. 1* 800703** 800803** 1 1 2 3 4 5 6 7 8 9 10 11 --- 150309 301304 150518 100902 153001 800603 152004 153002 153001 116002 401010 40 4 1 4 4 1 4 4 4 1 1 Description AD-30 Basket (tumbler) ONLY without Felt Collar AD-30 Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” Hex Head TEK Crimptite Screw AD-30 Basket (tumbler) Rib ONLY 5/16-18 x 3/8” Socket Button Head Screw 5/16-18 x 31” Tie Rod 5/16” Flat Washer AD-30 Basket (tumbler) Support ONLY 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar (5.0 oz. tube) * For stainless steel basket (tumbler), contact factory. ** Felt collar is not included and must be ordered separately. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 43 AD-50 Basket (Tumbler)/Support Assemblies For Models Mfd. with Non-Tapered Ribs ONLY Illus. No. 1* 2 3 4 5 6 7 8 9 10 11 --- Part No. Qty. 800705** 800820** 1 1 800817** 1 150309 301302 301310 150518 100902 153001 800616 800614 152004 153002 153001 116002 401010 40 2 2 1 4 4 1 1 4 4 4 1 1 Description AD-50 Basket (tumbler) ONLY without Felt Collar AD-50 Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) AD-50 Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” Hex Head TEK Crimptite Screw AD-50 Basket (tumbler) Rib ONLY (low rib) AD-50 Basket (tumbler) Baffle Rib ONLY (high rib) 5/16-18 x 3/8” Socket Button Head Screw 5/16-18 x 31” Tie Rod 5/16” Flat Washer AD-50 Non-Reversing Basket (tumbler) Support ONLY AD-50 Reversing Basket (tumbler) Support ONLY 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar (5.0 oz. tube) * For stainless steel basket (tumbler), contact factory. ** Felt collar is not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 44 AD-50 Basket (Tumbler)/Support Assemblies For Models Mfd. with Tapered Ribs ONLY Illus. No. 1* 2 3 4 5 6 7 8 9 10 11 --- Part No. Qty. 800838** 800837** 1 1 800839** 1 150309 301302 301311 150518 100902 153001 800616 800614 152004 153002 153001 116002 401010 40 2 2 1 4 4 1 1 4 4 4 1 1 Description AD-50 Basket (tumbler) ONLY with Tapered Ribs without Felt Collar AD-50 Non-Reversing Basket (tumbler) and Support Assembly Complete with Tapered Ribs (includes illus. nos. 1 through 10) AD-50 Reversing Basket (tumbler) and Support Assembly Complete with Tapered Ribs (includes illus. nos. 1 through 10) #10-16 x 1/2” Hex Head TEK Crimptite Screw AD-50 Basket (tumbler) Rib ONLY (low rib) AD-50 Basket (tumbler) Baffle Rib ONLY (high rib) 5/16-18 x 3/8” Socket Button Head Screw 5/16-18 x 31” Tie Rod 5/16” Flat Washer AD-50 Non-Reversing Basket (tumbler) Support ONLY AD-50 Reversing Basket (tumbler) Support ONLY 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar (5.0 oz. tube) * For stainless steel basket (tumbler), contact factory. ** Felt collar is not included and must be ordered separately. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 45 AD-30 Drop Lint Door Assembly Illus. No. Part No. Qty. 1 160001 160103 800150 160200 160003 160104 160008 160009 150425 1 1 1 1 1 1 1 1 1 157000 800216* 1 1 800233* 1 800240 150201 117600 117603 180210 150419 150418 108120 1 10 7 3 2 2 1 1 2 3 4 5 6 7 8 9 10 * Description AD-100 Lock Assembly with Key AD-100 Key ONLY Knob Latch Kit Assembly (for non-coin models Only) Knob Latch ONLY with Two (2) Screws (for non-coin models Only) Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam For AD-100 Lock Knob Latch Adjustable Cam (for non-coin models Only) #12-24 x 3/8” Phillips Round Head Machine Screw (for knob latch adjustable cam) Drop Lint Door Spring AD-30 Drop Lint Door Assembly (includes illus. nos. 4 through 8) AD-30 Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) AD-30 Stainless Steel Drop Lint Door Assembly #10-32 x 1/4” Phillips Pan Head TEK Screw Noise Suppressor Tape (sold by the foot) Suppressor Tape/Gasket (sold by the foot) AD-30 Trim/Kick Plate (31-1/8” length) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain For Drop Lint Door Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 46 American Dryer Corporation AD-50 Drop Lint Door Assembly 88 Currant Road / Fall River, MA 02720-4781 47 AD-50 Drop Lint Door Assembly Illus. No. Part No. Qty. 1 160001 160103 800150 160200 160003 160104 160008 160009 150425 1 1 1 1 1 1 1 1 1 157000 800219* 1 1 800232* 1 800243 150201 117600 117603 180210 150419 150418 108120 1 10 7 3 2 2 1 1 2 3 4 5 6 7 8 9 10 * Description AD-100 Lock Assembly with Key AD-100 Key ONLY Knob Latch Kit Assembly (for non-coin models Only) Knob Latch ONLY with Two (2) Screws (for non-coin models Only) Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam For AD-100 Lock Knob Latch Adjustable Cam (for non-coin models Only) #12-24 x 3/8” Phillips Round Head Machine Screw (for knob latch adjustable cam) Drop Lint Door Spring AD-50 Drop Lint Door Assembly (includes illus. nos. 4 through 8) AD-50 Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) AD-50 Stainless Steel Drop Lint Door Assembly #10-32 x 1/4” Phillips Pan Head TEK Screw Noise Suppressor Tape (sold by the foot) Suppressor Tape/Gasket (sold by the foot) AD-30 Trim/Kick Plate (31-1/8” length) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain For Drop Lint Door Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 48 AD-30 Lint Trap Assembly Illus. No. Part No. Qty. 1 800408 1 2 3 4 5 6 7 - 800409 154200 304102 150300 800503 150419 108120 150418 1 7 1 3 1 2 1 1 American Dryer Corporation Description AD-30 Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) AD-30 Lint Trap ONLY 5/32” Pop Rivet AD-30 Lint Screen Holder ONLY #10-16 x 1/2” Hex Washer TEK Screw AD-30 Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver 88 Currant Road / Fall River, MA 02720-4781 AD-50 Lint Trap Assembly Illus. No. Part No. Qty. 1 800402 1 800404 800407 1 1 800406 154200 304101 150300 800501 150419 108120 150418 1 7 1 3 1 2 1 1 2 3 4 5 6 7 - Telephone: (508) 678-9000 49 Description AD-50 Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) AD-50 Non-Reversing Lint Trap ONLY AD-50 Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) AD-50 Reversing Lint Trap ONLY 5/32” Pop Rivet AD-50 Lint Screen Holder ONLY #10-16 x 1/2” Hex Washer TEK Screw AD-50 Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door Tamperproof Screw Hand Driver Fax: (508) 678-9447 50 American Dryer Corporation AD-30 Basket (Tumbler) Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 51 AD-30 Basket (Tumbler) Bearing Assembly Illus. No. Part No. Qty. 880203 153005 152005 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1 801103 1 801105 801104 880779 1 1 1 880202 19 152004 20 150610 21 101100 22 154301 23 100713 24 100108 25 824807 As required. 1 2 2 1 2 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 * Telephone: (508) 678-9000 Description 1-3/8” Flange Bearing with Nylock Setscrew 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8” Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8” Pillow Block Bearing Assembly with Magnet (for models mfd. with rotational sensor) 1-3/8” Pillow Block Bearing ONLY 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley 5/16-18 x 1” Allen Setscrew 1/4” x 1/4” x 7/8” Key 5L-680 V-Belt (basket [tumbler] to idler) Rotational Sensor Assembly Fax: (508) 678-9447 52 American Dryer Corporation AD-50 Basket (Tumbler) Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 53 AD-50 Basket (Tumbler) Bearing Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 * Part No. Qty. 880220 153025 152050 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1 801103 1 801105 801104 880779 1 1 1 880202 152004 150610 101100 101118 101119 154301 100713 100108 824807 1 2 2 1 1 1 2 1 1 1 Description 1-3/4” Flange Bearing with Nylock Setscrew 9/16” Lock Washer 9/16-12 Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8” Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8” Pillow Block Bearing Assembly with Magnet (for models mfd. with rotational sensor) 1-3/8” Pillow Block Bearing ONLY 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1-3/8” Taper Lock Hub (for reversing models Only) 5/16-18 x 1” Allen Setscrew 1/4” x 1/4” x 7/8” Key 5L-680 V-Belt (basket [tumbler] to idler) Rotational Sensor Assembly As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 54 American Dryer Corporation AD-30/AD-50 Idler Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 55 AD-30/AD-50 Idler Bearing Assembly Illus. No. Part No. Qty. 1 100108 1 2 4 5 6 7 8 9 10 11 101129 101140 100110 100112 154301 100705 301850 152002 153007 100214 150521 801007 1 1 1 1 2 1 1 3 3 2 3 1 12 13 14 15 16 17 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 3 Telephone: (508) 678-9000 Description 5L-680 V-Belt (idler to basket [tumbler]) For Use On AD-30 and AD-50 Models 9” x 2-1/2” Compound Pulley (for use on AD-30 models Only) 14” x 3” Compound Pulley (for use on AD-50 models Only) 4L-500 V-Belt (idler to motor) For Use On AD-30 Models ONLY 4L-610 V-Belt (idler to motor) For Use On AD-50 Models ONLY 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key 5/8” x 3/4” Idler Shaft 1/4-20 Hex Nut 1/4” Lock Washer 5/8” Flange Bearing 1/4-20 x 2” Carriage Bolt Idler Bearing Assembly Complete (includes illus. nos. 5 through 17) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 56 AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Non-Tapered Ribs ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 57 For Models Mfd. with Non-Tapered Ribs ONLY Illus. No. Part No. Qty. 1 2 3 100110 100701 101104 101132 150501 153002 153001 100065 1 1 1 1 4 4 4 1 122701 122801 137030 152004 153002 153001 117600 154000 800908 803938* 8 1 1 4 4 4 4 4 1 1 803883* 1 803809* 1 153050 100604 100702 153050 152006 120200 100004 2 1 1 2 2 1 1 100007 1 4 5 6 7* 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22* * Description 4L-500 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only) 1/2” x 2” Motor Pulley (for use on 1-phase [1ø] models Only) 5/8” x 2” Motor Pulley (for use on 3-phase [3ø] models Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut AD-30 Non-Reversing Motor Mount ONLY (56Z frame) 1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 7 and 13 through 20) Plug Type Motor 1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 7 and 13 through 22) Non-Plug Type Motor 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 7 and 13 through 22) Non-Plug Type Motor 1/2” S.A.E. Flat Washer 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 58 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Non-Tapered Ribs ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 59 For Models Mfd. with Non-Tapered Ribs ONLY Illus. No. Part No. Qty. 1 2 3 100112 100701 101133 101130 150501 153002 153001 120200 100033* 1 1 1 1 4 4 4 1 1 100034 1 100007* 1 152004 153002 153001 117600 154000 800905 803852* 4 4 4 4 4 1 1 803793* 1 803849* 1 803856* 1 153050 100604 100702 153050 152006 2 1 1 2 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 * Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only) 5/8” x 2-1/4” Motor Pulley (for use on 60 Hz models Only) 5/8” x 2-1/2” Motor Pulley (for use on 50 Hz models Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 3/8” x 90° Connector 3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut AD-50 Non-Reversing Motor Mount ONLY (56Z frame) 3/4 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 12 through 19) 3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 1 through 19) 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 12 through 19) 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 12 through 19) 1/2” S.A.E. Flat Washer 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 60 AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Non-Tapered Ribs ONLY Illus. No. Part No. Qty. 1 2 3 4 5 100112 100701 101133 101130 120200 181003* 1 1 1 1 1 1 6 7 8 150501 153002 153001 4 4 4 American Dryer Corporation Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (for use on 60 Hz models Only) 5/8” x 2-1/2” Motor Pulley (for use on 50 Hz models Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 88 Currant Road / Fall River, MA 02720-4781 AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly (continued) 61 For Models Mfd. with Non-Tapered Ribs ONLY Illus. No. Part No. Qty. 9 100065 1 10 122701 122801 137030 150501 153002 153001 154000 152004 153002 153001 800912 803873* 8 1 1 4 4 4 8 4 4 4 1 1 803869* 1 803940 1 117600 153050 100702 100604 153050 152006 100004* 4 2 1 1 2 2 1 100035 1 120200 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 * Description 1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor - Plug Type Motor Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Tinnerman Nut 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer AD-50 Reversing Motor Mount ONLY AD-50 1ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete - Plug Type Motor (includes illus. nos. 2 through 15 and 19 through 25) AD-50 1ø 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete - Non-Plug Type Motor (includes illus. nos. 2 through 8, 12 through 15, and 19 through 27) AD-50 3ø 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete - Non-Plug Type Motor (includes illus. nos. 2 through 8, 12 through 15, and 19 through 27) Noise Suppressor Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor 1/2 HP 230v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor 3/8” x 90° Connector Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 62 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Tapered Ribs ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 63 For Models Mfd. with Tapered Ribs ONLY Illus. No. Part No. Qty. 1 2 3 100112 100701 101130 101139 150501 153002 153001 120200 100033* 1 1 1 1 4 4 4 1 1 100034 1 100007* 1 152004 153002 153001 117600 154000 800905 803972* 4 4 4 4 4 1 1 803973* 1 803970* 1 803971* 1 153050 100604 100702 153050 152006 2 1 1 2 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 * Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only) 5/8” x 2-1/2” Motor Pulley (for use on 60 Hz models Only) 5/8” x 2-3/4” Motor Pulley (for use on 50 Hz models Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 3/8” x 90° Connector 3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut AD-50 Non-Reversing Motor Mount ONLY 3/4 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 12 through 19) 3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 1 through 19) 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 12 through 19) 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 3 through 8 and 12 through 19) 1/2” S.A.E. Flat Washer 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 64 AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly For Models Mfd. with Tapered Ribs ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 65 For Models Mfd. with Tapered Ribs ONLY Illus. No. Part No. Qty. 1 2 3 4 5 100112 100701 101130 101139 120200 181003* 1 1 1 1 1 1 6 7 8 9 150501 153002 153001 100065 4 4 4 1 10 122701 122801 137030 150501 153002 153001 154000 152004 153002 153001 800912 803974* 8 1 1 4 4 4 8 4 4 4 1 1 803977 1 20 21 22 23 24 25 26 117600 153050 100702 100604 153050 152006 100035 4 2 1 1 2 2 1 27 120200 1 11 12 13 14 15 16 17 18 19 * Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (for use on 30 Hz models Only) 5/8” x 2-3/4” Motor Pulley (for use on 50 Hz models Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor - Plug Type Motor Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Tinnerman Nut 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer AD-50 Reversing Motor Mount ONLY AD-50 1ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete - Plug Type Motor (includes illus. nos. 2 through 9, 12 through 15, and 19 through 25) AD-50 3ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete - Non-Plug Type Motor (includes illus. nos. 2 through 8, 12 through 15, and 19 through 27) Noise Suppressor Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 1/2 HP 230v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor 3/8” x 90° Connector Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 66 Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly Non-Computer Sensor Bracket Assembly Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 7 8 9 10 130301 153010 152000 121028 122701 122605 154007 150000 801425 1 2 2 2 4 1 2 2 1 11 12 13 305007 122604 122700 150301 1 1 4 2 American Dryer Corporation Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Slotted Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 88 Currant Road / Fall River, MA 02720-4781 67 Sensor Bracket Assemblies (continued) Illus. No. 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Part No. Qty. Description 150005 130100 130109 130301 130107 130301 130101 153010 152000 840063 840065 121028 122701 122609 122605 831702 * 1 1 1 1 1 1 * * 1 1 ** *** 1 1 1 840062 1 801405 1 801411 1 305007 122608 122604 1 1 122700 122801 150301 *** 1 2 #6-32 x 1/4” Phillips Round Head Machine Screw 150° Large Thermostat 140° Large Thermostat (for UniDryer® models Only) 225° Large Manual Reset Thermostat 160° Large Thermostat (for UniDryer® models Only) 225° Large Manual Reset Thermostat (for UniDryer® models Only) 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Three (3) ONLY Sensor Jumper Four (4) ONLY (for UniDryer® models Only) Insulated Terminal ONLY Socket Terminal ONLY 3-Pin Socket Connector ONLY 4-Pin Socket Connector ONLY (for UniDryer® models Only) Sensor Three (3) Bracket Harness Assembly (includes illus. nos. 22 through 24) Sensor Four (4) Bracket Harness Assembly (includes illus. nos. 22 through 24) For UniDryer® Models ONLY Non-Computer Sensor Three (3) Bracket Assembly Complete with Thermostats (includes illus. nos. 14 through 25) For Models Mfd. as of August 1, 1993 Non-Computer Sensor Four (4) Bracket Assembly Complete with Thermostats (includes illus. nos. 14 through 25) For UniDryer® Models ONLY Universal Sensor Bracket ONLY 3-Pin Connector ONLY 4-Pin Connector ONLY (for UniDryer® models Only) Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw * Quantity is 4 or 5. ** Quantity is 6 or 8. *** Quantity is 3 or 4. Telephone: (508) 678-9000 Fax: (508) 678-9447 68 ADG-30 Standard Non-Hi/Lo Burner Assembly For Models Mfd. with Globar® Ignition ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-30 Standard Non-Hi/Lo Burner Assembly 69 For Models Mfd. with Globar® Ignition ONLY Illus. No. Part No. Qty. 1* ---------** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21* 804004 150309 150001 130401 319704 151000 152001 153012 130500 150108 150309 802705 150108 153000 151001 141105 150002 153017 128910 151000 --------- 1 2 2 1 1 2 2 1 1 2 2 1 2 2 2 2 1 1 1 2 2 27 28 29 30 --- 141206 319501 150301 150309 140004 140402 318700 150309 142809 881367 ---------* 1 1 3 2 1 1 2 4 1 1 1 --- 410000 1 22 23 24 25 26 Description ADG-30 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 20 and 22 through 30) Refer to Globar® Burner Assembly Listing on page 100 Non-Heat Reclaimer Burner Box ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #8-32 Hex Nut #8 Star Washer Infrared (IR) Sensor ONLY #8-32 x 1/2” Phillips Pan Head Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Infrared (IR)/Globar® Mounting Bracket ONLY #8-32 x 1/2” Phillips Pan Head Screw #8 Steel Burr #8-32 Pal Nut Large Burner Tube #6-32 x 1” Phillips Round Head Machine Screw #6 Steel Burr Globar® ONLY #6-32 Pal Nut Burner Orifice (refer to Globar® Burner Orifice Listing on page 100) 3/8” Swage Manifold ONLY 3/8” Gas Valve Mounting Bracket ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 3/8” Globar® (natural gas) Gas Valve 3/8” Valve Liquid Propane (L.P.) Conversion Kit Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” x 29-1/8” Pipe 1/2” Union Shutoff with Tail Piece Conversion Kit (refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing on page 100) 3/8” Allen Wrench * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 70 ADG-50 Standard Non-Hi/Lo Burner Assembly For Models Mfd. with Globar® Ignition ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-50 Standard Non-Hi/Lo Burner Assembly 71 For Models Mfd. with Globar® Ignition ONLY Illus. No. Part No. Qty. 1* ---------** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21* 804004 150309 150001 130401 319704 151000 152001 153012 130500 150108 150309 802705 150108 153000 151001 141105 150002 153017 128910 151000 --------- 1 2 2 1 1 2 2 1 1 2 2 1 2 2 2 2 1 1 1 2 2 26 27 28 29 --- 141205 318700 150309 140005 140411 318700 150309 142809 881367 ---------* 1 1 2 1 1 2 4 1 1 1 --- 410001 1 22 23 24 25 Description ADG-50 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 20 and 22 through 29) Refer to Globar® Burner Assembly Listing on page 100 Non-Heat Reclaimer Burner Box ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #8-32 Hex Nut #8 Star Washer Infrared (IR) Sensor ONLY #8-32 x 1/2” Phillips Pan Head Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Infrared (IR)/Globar® Mounting Bracket ONLY #8-32 x 1/2” Phillips Pan Head Screw #8 Steel Burr #8-32 Pal Nut Large Burner Tube #6-32 x 1” Phillips Round Head Machine Screw #6 Steel Burr Globar® ONLY #6-32 Pal Nut Burner Orifice (refer to Globar® Burner Orifice Listing on page 100) 1/2” Manifold ONLY (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” Globar® (natural gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” x 29-1/8” Pipe 1/2” Union Shutoff with Tail Piece Conversion Kit (refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing on page 100) 1/2” Allen Wrench * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 72 ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly For Models Mfd. with Globar® Ignition ONLY American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly 73 For Models Mfd. with Globar® Ignition ONLY Illus. No. Part No. Qty. 1* ---------** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21* 804004 150309 150001 130401 319704 151000 152001 153012 130500 150108 150309 802705 150108 153000 151001 141105 150002 153017 128910 151000 --------- 1 2 2 1 1 2 2 1 1 2 2 1 2 2 2 2 1 1 1 2 2 26 27 28 29 --- 141205 318700 150309 140010 140011 318700 150309 142809 881367 ---------* 1 1 2 1 1 2 4 1 1 1 --- 410001 1 22 23 24 25 Description ADG-50 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 20 and 22 through 29) Refer to Globar® Burner Orifice Listing on page 100 Non-Heat Reclaimer Burner Box ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #8-32 Hex Nut #8 Star Washer Infrared (IR) Sensor ONLY #8-32 x 1/2” Phillips Pan Head Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Infrared (IR)/Globar® Mounting Bracket ONLY #8-32 x 1/2” Phillips Pan Head Screw #8 Steel Burr #8-32 Pal Nut Large Burner Tube #6-32 x 1” Phillips Round Head Machine Screw #6 Steel Burr Globar® ONLY #6-32 Pal Nut Burner Orifice (refer to Globar® Burner Assembly Listing on page 100) 1/2” Manifold ONLY (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” Hi/Lo Globar® (natural gas) Gas Valve 1/2” Hi/Lo Globar® Liquid Propane (L.P.) Gas Valve Pipe Bracket (bent) #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” x 29-1/8” Pipe 1/2” Union Shutoff with Tail Piece Liquid Propane (L.P.) Conversion Kit (refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing on page 100) 1/2” Allen Wrench * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 74 ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. with Direct Spark Ignition (DSI) ONLY Direct Spark Ignition (DSI) module may be mounted on the left outside wall (as shown) or it may be mounted on the inside of the left side panel. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly 75 For Models Mfd. with Direct Spark Ignition (DSI) ONLY Illus. No. Part No. Qty. 1 2 3 4 318030 150300 150309 128915 880134 1 2 2 1 1 5 6 7 8 9 10* 880330 150103 153000 151001 141105 --------- 1 2 2 2 2 2 11 12 13 14 141230 318700 150300 128927 1 1 2 1 140411 880960 1 1 15 16 17 18 19* 881367 142809 150309 318700 ---------** 1 1 4 2 1 20 21 22 23 --- 850851 850861 880815 150299 319505 150301 --------- 1 1 1 4 1 *** 1 Description Direct Spark Ignition (DSI) Burner Shield (2-tube) #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly Ignitor/Flame-Probe Kit Assembly (includes high voltage [HV] wire and connector assembly) High Voltage (HV) Wire and Connector Assembly #8-32 x 1/2” Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner ONLY Burner Orifice (refer to Direct Spark Ignition [DSI] Burner Orifice Listing on page 101) 1/2” Direct Spark Ignition (DSI) Manifold (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw 1/2” Direct Spark Ignition (DSI) 24 VAC Redundant (natural gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit 1/2” Direct Spark Ignition (DSI) Gas Valve/Liquid Propane (L.P.) Conversion Kit Combination 1/2” Union Shutoff with Tail Piece 1/2” x 29-1/8” Pipe #10-16 x 1/2” Hex Head TEK Crimptite Screw Pipe Bracket (bent) Direct Spark Ignition (DSI) Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 23) Refer to Direct Spark Ignition (DSI) Burner Assembly Listing on page 101 Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz) #10 x 1” Hex Washer TEK Screw Direct Spark Ignition (DSI) Module Mounting Bracket ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Conversion Kit (refer to Direct Spark Ignition [DSI] Liquid Propane [L.P.] Conversion Kit Listing on page 101) * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. *** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 76 ADE-30/ADE-50 Electric Oven Assembly For Models Mfd. as of November 12, 1990 ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 77 ADE-30/ADE-50 Electric Oven Assembly For Models Mfd. as of November 12, 1990 Illus. No. Part No. Qty. 1 803005 ---------* ---------* 150300 802800 802801 1 1 2 1 1 154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150207 130400 150300 154001 121012 152014 ---------* ---------* 120081 120080 152008 121011* ---------* 153009 320301 150207 1 2 1 1 2 1 1 1 2 1 1 2 1 2 2 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Phillips Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 1/2” Phillips Pan Head Machine Screw 290° Hi-Limit #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 1/2” Phillips Pan Head Machine Screw Refer to ADE-30/ADE-50 Electric Oven Component Application Charts on page 102. Telephone: (508) 678-9000 Fax: (508) 678-9447 78 ADE-30/ADE-50 Electric Oven Assembly For Models Mfd. prior to November 12, 1990 ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 79 ADE-30/ADE-50 Electric Oven Assembly For Models Mfd. prior to November 12, 1990 Illus. No. Part No. Qty. 1 803001 ---------* ---------* 150300 802800 802801 1 1 2 1 1 154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150207 130400 150300 154001 150103 120704 154001 152001 121012 152014 ---------* ---------* 120081 120080 152008 121011* ---------* 153009 320301 150207 1 2 1 1 2 1 1 1 2 1 1 2 1 2 2 2 -* 2 2 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 * Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Phillips Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 1/2” Phillips Pan Head Machine Screw 290° Hi-Limit #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut #8-32 x 3/4” Phillips Round Head Machine Screw Terminal Block #10-24 Speed Nut #8-32 Hex Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 1/2” Phillips Pan Head Machine Screw Refer to ADE-30/ADE-50 Electric Oven Component Application Charts on page 103. Telephone: (508) 678-9000 Fax: (508) 678-9447 80 ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies For Globar® Models and Direct Spark Ignition (DSI) Models ONLY Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 154004 150309 802799 150303 122200 105500 319202 154002 802800 802801 1 2 1 2 1 1 1 1 1 1 10 11 12 13 14 15 142809 150309 319704 151000 150001 130401 1 2 1 2 2 1 American Dryer Corporation Description Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4” Phillips Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Assembly Complete (includes illus. nos. 1 through 8) 1/2” x 29-1/8” Pipe #10-16 x 1/2” Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit ONLY 88 Currant Road / Fall River, MA 02720-4781 ADG-30/ADG-50 Replacement Coils For 3/8” Non-Hi/Lo Gas Valve 81 For Globar® Ignition Models ONLY Illus. No. Part No. Qty. 1 2 3 140111 140112 140110 1 1 1 Telephone: (508) 678-9000 Description Holding Coil Booster Coil Secondary Coil Fax: (508) 678-9447 82 ADG-30/ADG-50 Replacement Coils For 3/8” Hi/Lo Gas Valve For Globar® Ignition Models ONLY Illus. No. Part No. Qty. 1 2 3 4 140116 140115 140117 140118 1 1 1 1 American Dryer Corporation Description Holding Coil Booster Coil Secondary Coil Hi/Lo Coil 88 Currant Road / Fall River, MA 02720-4781 83 Microprocessor Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 150301 322808 137060 137013 153002 152004 150108 132425 6 1 1 4 2 2 2 1 132427 1 151001 322807 150108 132426 2 1 2 1 132427 2 151001 2 9 10 11 12 13 Telephone: (508) 678-9000 Description #8-18 x 7/16” Phillips Pan Head TEK Screw Control Box Cover Plate ONLY (12” x 8-1/2”) Arc Suppressor (A.S.) Board Three (3) Nylon Standoff 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw Impellor (blower/fan) Contactor (for 208/230/240 volt - 50/60 Hz models Only) Impellor (blower/fan) Contactor Replacement Coil (for 208/230/240 volt - 50/60 Hz models Only) #8-32 Pal Nut Contactor Mounting Panel ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Contactor (for 208/230/240 volt - 50/60 Hz models Only) Reversing Contactor Replacement Coil (for 208/230/240 volt - 50/60 Hz models Only) #8-32 Pal Nut Fax: (508) 678-9447 84 Dual Timer Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays Illus. No. Part No. Qty. 1 2 3 4 150301 322808 150108 132200 132202 151001 153002 152004 150108 132425 6 1 2 1 1 2 2 2 2 1 132427 1 151001 322807 150108 132426 2 1 2 1 132427 2 151001 2 5 6 7 8 9 10 11 12 13 14 American Dryer Corporation Description #8-18 x 7/16” Phillips Pan Head TEK Screw Control Box Cover Plate ONLY (12” x 8-1/2”) #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Timer (60 Hz) Reversing Timer (50 Hz) #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw Impellor (blower/fan) Contactor (for 208/230/240 volt - 50/60 Hz models Only) Impellor (blower/fan) Contactor Replacement Coil (for 208/230/240 volt - 50/60 Hz models Only) #8-32 Pal Nut Contactor Mounting Panel ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Contactor (for 208/230/240 volt - 50/60 Hz models Only) Reversing Contactor Replacement Coil (for 208/230/240 volt - 50/60 Hz models Only) #8-32 Pal Nut 88 Currant Road / Fall River, MA 02720-4781 85 Microprocessor Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 150301 322808 137060 137013 153002 152004 150108 132400 6 1 1 4 2 2 2 1 9 10 11 12 151001 322807 150108 132404 2 1 2 1 132401 2 132416 1 132415 2 132407 2 151001 2 13 14 Telephone: (508) 678-9000 Description #8-18 x 7/16” Phillips Pan Head TEK Screw Control Box Cover Plate ONLY (12” x 8-1/2”) Arc Suppressor (A.S.) Board Three (3) Nylon Standoff 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw Impellor (blower/fan) Contactor (for 208 volt models Only) #8-32 Pal Nut Contactor Mounting Panel ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Contactor (for 208 volt - 60 Hz models Only) Reversing Contactor (for 220/230 volt - 60 Hz models Only) Reversing Contactor Replacement Coil (for 208 volt - 60 Hz models Only) Reversing Contactor Replacement Coil (for 220/230 volt - 60 Hz models Only) Reversing Contactor Replacement Coil (for 240 volt - 50 Hz models Only) #8-32 Pal Nut Fax: (508) 678-9447 86 Dual Timer Reversing Rear Control Box Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 150301 322808 150108 132200 132202 151001 153002 152004 150108 132400 6 1 2 1 1 2 2 2 2 1 10 11 12 13 151001 322807 150108 132404 2 1 2 1 132401 2 132416 1 132415 2 132407 2 151001 2 14 15 American Dryer Corporation Description #8-18 x 7/16” Phillips Pan Head TEK Screw Control Box Cover Plate ONLY (12” x 8-1/2”) #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Timer (60 Hz) Reversing Timer (50 Hz) #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw Impellor (blower/fan) Contactor (for 208/230/240 volt - 50/60 Hz models Only) #8-32 Pal Nut Contactor Mounting Panel ONLY #8-32 x 1/2” Phillips Pan Head Machine Screw Reversing Contactor (for 208 volt - 60 Hz models Only) Reversing Contactor (for 220/230 volt - 60 Hz models Only) Reversing Contactor Replacement Coil (for 208 volt - 60 Hz models Only) Reversing Contactor Replacement Coil (for 220/230 volt - 60 Hz models Only) Reversing Contactor Replacement Coil (for 240 volt - 50 Hz models Only) #8-32 Pal Nut 88 Currant Road / Fall River, MA 02720-4781 3-Phase (3Ø) Motor, Electric Relay Panel Assembly 87 For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays Illus. No. Part No. Qty. 1 2 3* 4 150309 311913 311921 880662 132400 6 1 1 1 1 5 151001 2 * Description #10-16 x 1/2” Hex Head TEK Crimptite Screw Service Box Cover Plate ONLY (9-7/8” x 4-3/8”) Service Box Cover Plate ONLY (9-7/8” x 5-3/4”) Dual RC Suppressor with Tab Receptacle ONLY Impellor (blower/fan) Contactor (for 208/230/240 volt - 50/60 Hz models Only) #8-32 Pal Nut Used on microprocessor controller (computer) models ONLY. Telephone: (508) 678-9000 Fax: (508) 678-9447 88 3-Phase (3Ø) Motor, Electric Relay Panel Assembly For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays Illus. No. Part No. Qty. 1 2 150309 311913 311921 137015 132425 6 1 1 1 1 132427 1 150108 150300 151001 311920 4 2 4 1 3* 4 5 6 7 8 * Description #10-16 x 1/2” Hex Head TEK Crimptite Screw Service Box Cover Plate ONLY (9-7/8” x 4-3/8”) Service Box Cover Plate ONLY (9-7/8” x 5-3/4”) Arc Suppressor (A.S.) Capacitor ONLY Impellor (blower/fan) Contactor (for 208/230/240 volt - 50/60 Hz models Only) Impellor (blower/fan) Contactor Replacement Coil (for 208/230/240 volt - 50/60 Hz models Only) #8-32 x 1/2” Phillips Pan Head Machine Screw #10-16 x 1/2” Hex Washer TEK Screw #8-32 Pal Nut 3-Phase (3ø) Non-Reversing Contactor Mounting Bracket Used on microprocessor controller (computer) models ONLY. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 89 Control/Heat Step Down Transformer For Globar® Models and High Pressure Motorized Steam Valve Models ONLY Illus. No. * Part No. Qty. 1* 132002 1 2 3 880210 150309 121400 1 2 2 Description 200 Watt Transformer (terminals are not included) For 120 Volt Models ONLY Terminal Package for Globar® Transformer #10-16 x 1/2” Hex Head TEK Crimptite Screw Universal Bushing Used on models with 208 volt and 230 volt controls ONLY. Telephone: (508) 678-9000 Fax: (508) 678-9447 90 American Dryer Corporation ADS-30 Steam Coil Damper Assembly 88 Currant Road / Fall River, MA 02720-4781 ADS-30 Steam Coil Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 803416 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151007 152007 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 36 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1 Telephone: (508) 678-9000 91 Description ADS-30 Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Damper Hinge Assembly ADS-30 Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Gasket (68-1/2” length) 7/16-20 Stainless Steel Acorn Nut 7/16-20 Hex Nut 1-1/16” x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Phillips Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) Fax: (508) 678-9447 92 American Dryer Corporation ADS-50 Steam Coil Damper Assembly 88 Currant Road / Fall River, MA 02720-4781 ADS-50 Steam Coil Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165011 153002 152004 152002 153007 820321 803417 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151007 152007 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 36 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1 Telephone: (508) 678-9000 93 Description ADS-50 Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Damper Hinge Assembly ADS-50 Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Gasket (68-1/2” length) 7/16-20 Stainless Steel Acorn Nut 7/16-20 Hex Nut 1-1/16” x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Phillips Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) Fax: (508) 678-9447 94 ADS-30/ADS-50 Steam Coil/Valve Assembly For Motorized Type and Solenoid Type Models ONLY Illus. No. Part No. Qty. 1 803500 803501 150300 165002 165003 142711 142713 165107 165102 165103 1 1 6 1 1 1 1 1 1 1 2 3 4 5 American Dryer Corporation Description Large Steam Rack (for high pressure Only) Large Steam Rack (for low pressure Only) #10-16 x 1/2” Hex Washer TEK Screw Large Steam Coil (for high pressure Only) Large Steam Coil (for low pressure Only) 1” Closed Nipple (for high pressure Only) 1-1/4” Closed Nipple (for low pressure Only) 1” Motorized Steam Valve (for high pressure Only) 1-1/4” Solenoid Valve - 120 VAC (for low pressure Only) 1-1/4” Solenoid Valve - 230 VAC (for low pressure Only) 88 Currant Road / Fall River, MA 02720-4781 AD-30/AD-50 Outer Top/Back Guard Assemblies Illus. No. Part No. Qty. 1 312511 312518 312519 150300 121101 121100 801521 152014 880501 103500 1 1 1 7 1 1 1 3 1 4 2 3 4 5 6 7 8 Telephone: (508) 678-9000 95 Description Outer Top Assembly (for AD-30 gas models and electric models Only) Outer Top Assembly (for ADG-50 gas models Only) Outer Top Assembly (for ADE-50 electric models Only) #10-16 x 1/2” Hex Washer TEK Screw Junction Box Cover ONLY (for gas models and steam models Only) Junction Box ONLY (for gas models and steam models Only) Back Guard Assembly 1/4-20 Free Spin Wash Nut 8” Damper Replacement (for non-heat reclaimer models Only) Leveling Leg Fax: (508) 678-9447 96 ADG-30/ADG-50 Heat Reclaimer Assembly Illus. No. 1 2 3 4 5 6* 7 8 9* 10 11 * Part No. Qty. 121101 121100 801521 152014 103500 143513 880502 143509 117505 143501 880502 143509 1 1 1 3 4 1 1 1 2 1 1 1 Description Junction Box Cover ONLY Junction Box ONLY Back Guard Assembly 1/4-20 Free Spin Wash Nut Leveling Leg 6” x 6” x 5” Tee 6” Replacement Damper Assembly 6” Flexible Duct Aluminum Duct Tape (sold by the foot) 8” x 6” x 6” Tee 6” Replacement Damper Assembly 6” Flexible Duct Damper assembly must be purchased separately. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 97 Relay Board Listing TYP E OF HEAT E LECTRIC S ERVICE V OLTAGE PHASE WIRE S ERVICE RELAY B OARD P ART NUM BER C ONTROL V OLTAGE 120 V OLT 208/230 V OLT GAS ® Globar Non-Hi/Lo Globar® Non-Hi/Lo Globar® Non-Hi/Lo Globar® Hi/Lo Globar® Hi/Lo Globar® Hi/Lo Direct Spark Ignition (DSI) Direct Spark Ignition (DSI) Direct Spark Ignition (DSI) 120 208/230 208/480 120 208/230 208/480 120 208/230 208/480 1ø 1ø 3ø 1ø 1ø 3ø 1ø 1ø 3ø 2 2 3 2 2 3 2 2 3 137077 or 137150 ----------------137077 or 137150 137077 137077 137076* ----------------- --------137079 137079 --------------------------------137151 137078 208/230 208/480 208 380/480 1ø 3ø 3ø 3ø 2 3 4 4 ----------------137151 --------- 137151 137078* --------137078* 120 208/230 208/480 120 208/230 208/480 1ø 1ø 3ø 1ø 1ø 3ø 2 2 3 2 2 3 137151 ----------------137151 ----------------- --------137151 137078 --------137151 137078 ELECTRIC 15 Kw through 30 Kw STEAM Low Pressure Low Pressure Low Pressure High Pressure High Pressure High Pressure * May also use Part No. 137151 (Solid State Relay [SSR] Board). IMPORTANT: Check label on relay board to verify correct part number. NOTE: ADC Part No. 137151 (Solid State Relay [SSR] Board) cannot be used with 3-phase (3ø) motors. Telephone: (508) 678-9000 Fax: (508) 678-9447 98 Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch (ADC Part No. 137056). Single Coin* ADC Part No. Nation 125100 125127 125101 125114 125115 125106 125120 125124 125109 125125 125108 125107 125130 125123 125104 125103 125121 125129 125132 125133 U.S. and Canada Canada United Kingdom United Kingdom United Kingdom France France France Denmark Netherlands Australia Australia Australia New Zealand Japan ------Singapore Hong Kong Description 25¢ Optic Coin Acceptor $1 Canadian Optic Coin Acceptor 10 New Pence Optic Coin Acceptor 20 New Pence Optic Coin Acceptor 1 Pound Optic Coin Acceptor 1 French Franc Optic Coin Acceptor 2 French Franc Optic Coin Acceptor 5 French Franc Optic Coin Acceptor 1 Danish Krone Optic Coin Acceptor 25¢ Guilder Optic Coin Acceptor 10¢ Australian Optic Coin Acceptor 20¢ Australian Optic Coin Acceptor $1 Australian Optic Coin Acceptor 50¢ New Zealand Optic Coin Acceptor 100 Yen Optic Coin Acceptor 0.882 Token Optic Coin Acceptor 0.800 Token Optic Coin Acceptor Muller Token Optic Coin Acceptor 50¢ Singapore Optic Coin Acceptor $1 Hong Kong Optic Coin Acceptor Dual Coin* 125116 125128 125112 125110 125111 125113 125122 125117 125131 125126 125118 125105 * U.S. and Canada Canada United Kingdom United Kingdom United Kingdom United Kingdom France Denmark Denmark Netherlands Singapore Japan 10¢/25¢ Dual Optic Coin Acceptor 25¢/$1 Dual Optic Coin Acceptor 10/20 Pence Dual Optic Coin Acceptor 10/50 Pence Dual Optic Coin Acceptor 20/50 Pence Dual Optic Coin Acceptor 1£/20 Pence Dual Optic Coin Acceptor 2/5 Franc Dual Optic Coin Acceptor 1/5 Danish Krone Dual Optic Coin Acceptor 5/10 Danish Krone Dual Optic Coin Acceptor 25¢/1 Guilder Dual Optic Coin Acceptor 20¢/50¢ Singapore Dual Optic Coin Acceptor 50/100 Yen Dual Optic Coin Acceptor Consult factory for coin acceptors not listed. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Coin Meter Replacement Parts Illus. No. Part No. Qty. 1 125511 125532 125530 125513 125500 125501 125502 125503 125504 125506 125507 125508 125510 115515 115516 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 4 Telephone: (508) 678-9000 99 Description 1/60 RPM 120 Volt/60 Hz Meter Motor 1/60 RPM 230 Volt/60 Hz Meter Motor 1/60 RPM 120 Volt/50 Hz Meter Motor 1/30 RPM 230 Volt/50 Hz Meter Motor 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch “B” with Arm Meter Switch “A” or “C” Fax: (508) 678-9447 100 ADG-30/ADG-50 Globar® Burner Assembly Specifications G LOBAR ® BURNER ORIFICE LISTING* ADC M ODEL NUM BER ADG-30B ADG-30B ADG-30BH ADG-30BH ADG-50B ADG-50B ADG-50BH ADG-50BH DRYER HEAT CONTROLS R ECLAIM ER Computer Non-Computer Computer Non-Computer Computer Non-Computer Computer Non-Computer QTY. No No Yes Yes No No Yes Yes 2 2 2 2 2 2 2 2 NATURAL G AS L IQUID P ROPANE (L.P.) G AS D.M.S. PART N O. D.M.S. PART N O. 1/8” 1/8” #31 #31 #27 #27 #30 #30 140843 140843 140818 140818 140822 140822 140819 140819 #49 #49 #49 #49 #44 #44 #48 #48 140803 140803 140803 140803 140808 140808 140804 140804 * Consult factory for elevations over 2,000 feet. GLOBAR® B URNER A SSEM BLY L ISTING ADC M ODEL NUM BER ADG-30B ADG-30B ADG-30BH ADG-30BH ADG-50B ADG-50B ADG-50BH ADG-50BH DRYER CONTROLS Computer Non-Computer Computer Non-Computer Computer Non-Computer Computer Non-Computer RECLAIM ER NATURAL G AS P ART NUM BER L IQUID P ROP ANE (L.P.) GAS P ART NUM BER No No Yes Yes No No Yes Yes 808702 808702 809591 809541 808703 808703 809593 809542 808802 808802 809601 809546 808803 808803 809603 809547 HEAT NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately. 2. Models with computer controls and optional heat reclaimer systems have Hi/Lo computerized gas valve system. 3. When ordering burner assemblies, specify model number and if computer or non-computer. G LOBAR® L IQUID P ROPANE (L.P.) C ONVERSION KIT LISTING* ADC M ODEL N UM BER ADG-30B ADG-30B ADG-30BH ADG-30BH ADG-50B ADG-50B ADG-50BH ADG-50BH DRYER C ONTROL S HEAT R ECLAIMER L IQUID P R OP ANE (L.P.) KIT P ART N UMBER Computer Non-Computer Computer Non-Computer Computer Non-Computer Computer Non-Computer No No Yes Yes No No Yes Yes 874012 874012 874013 874012 874014 874014 874016 874015 * Consult factory for elevations over 2,000 feet. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly Specifications 101 DIRECT SPARK IGNITION (DSI) B URNER ORIFICE L ISTING* ADC M ODEL N UMBER ADG-30D ADG-30DH ADG-50D ADG-50DH HEAT R ECLAIM ER QTY. No Yes No Yes L IQUID P ROP ANE (L.P.) G AS N ATURAL G AS D.M.S. P ART NO. D.M.S. PART NO. #30 1/8” #21 #26 140819 140843 140827 140823 #46 #49 #40 #43 140806 140803 140854 140809 2 2 2 2 * Consult factory for elevations over 2,000 feet. DIRECT SP ARK IGNITION (DSI) BURNER ASSEM BLY L ISTING ADC M ODEL NUM BER ADG-30D ADG-30DH ADG-50D ADG-50DH BTU/HR H EAT NATURAL GAS RATING RECLAIM ER P ART N UM BER 100,000 90,000 150,000 130,000 No Yes No Yes 809631 809633 809625 809624 LIQUID P ROP ANE (L.P.) G AS P ART NUM BER 809632 809634 809626 809624 NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately. 2. When ordering burner assemblies, specify model number and if computer or non-computer. DIRECT S PARK IGNITION (DSI) L IQUID P ROPANE (L.P.) CONVERSION KIT LISTING ADC M ODEL NUM BER KIT P ART NUM BER ADG-30D ADG-30DH ADG-50D ADG-50DH 874050 874049 874044 874045 * Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 102 ADE-30/ADE-50 Electric Oven Component Application Charts For Models Mfd. as of November 12, 1990 ADE-30 KW VOLTAGE PHASE WIRE O VEN ASSEMBLY PART NO .* E LEMEN T Qty. Kw RELAY T ER MINAL L UG B US B AR O VEN RELAY PART NO. C OIL Part No. Qty. Part No. 121011 Cat. No. Part No. PART NO. O VEN WIR E Part No. Qty. Size 30 208 3ø 3 815105 6 5 120012 6 #6 133200 7 121012 1 FEAG 131309 131811 30 208 3ø 4 815105 6 5 120012 6 #6 133200 7 121012 1 FEAF 131308 131810 30 230 3ø 3 815305 6 5 120013 5 #8 133100 7 121012 1 EEAG 131307 131809 30 416 3ø 3 or 4 815605 6 5 120012 3 #8 133100 4 121010 2 CEAG 131303 131809 30 460/480 3ø 3 or 4 815705 6 5 120013 3 #8 133100 4 121010 2 BEAG 131311 131809 25 380 3ø 3 or 4 815405 6 5 120012 3 #8 133100 4 121010 2 BEAG 131311 131809 24 208 3ø 3 815107 6 4 120010 5 #8 133100 7 121012 1 EEAG 131307 131809 24 208 3ø 4 815107 6 4 120010 5 #8 133100 7 121012 1 EEAF 131306 131808 24 230 3ø 3 815307 6 4 120011 5 #10 133000 7 121010 1 DEAG 131305 131809 24 416 3ø 3 or 4 815604 6 4 120010 3 #8 133100 4 121010 2 BEAG 131311 131809 24 460/480 3ø 3 or 4 815704 6 4 120011 3 #10 133000 4 121010 2 BEAG 131311 131809 20 208 1ø 2 815005 5 4 120010 2 #4 133330 2 121010 2 GEAG 131312 131811 20 230 1ø 2 815205 5 4 120011 2 #4 133330 2 121010 2 FEAG 131309 131811 20 380 3ø 3 or 4 815404 6 4 120010 3 #10 133000 4 121010 2 BEAG 131311 131809 15 208 3ø 3 or 4 815101 3 5 120012 3 #8 133100 4 121010 2 CEAG 131303 131809 15 208 3ø 3 815101 3 5 120012 3 #8 133100 4 121010 2 CEAF 131302 131808 15 230 3ø 3 815301 3 5 120013 3 #8 133100 4 121010 2 BEAG 131311 131809 ADE-50 KW * VOLTAGE PHASE WIRE OVEN A SSEMBLY PAR T N O.* E LEMENT Qty. Kw T ERMINAL L UG B US B AR P ART NO. Part No. Qty. Part No. 121011 OVEN WIRE Part No. Qty. Size RELAY COIL Part No. PART NO . O VEN RELAY Cat. No. 30 208 3ø 3 815106 6 5 120012 6 #6 133200 7 121010 1 FEAG 131309 131811 30 208 3ø 4 815106 6 5 120012 6 #6 133200 7 121010 1 FEAF 131308 131810 30 230 3ø 3 815306 6 5 120013 5 #8 133100 7 121010 1 EEAG 131307 131809 30 416 3ø 3 or 4 815603 6 5 120012 3 #8 133100 4 121010 2 CEAG 131303 131809 30 460/480 3ø 3 or 4 815703 6 5 120013 3 #8 133100 4 121010 2 BEAG 131311 131809 25 380 3ø 3 or 4 815403 6 5 120012 3 #8 133100 4 121010 2 BEAG 131311 131809 24 208 3ø 3 815104 6 4 120010 5 #8 133100 7 121010 1 EEAG 131307 131809 24 208 3ø 4 815104 6 4 120010 5 #8 133100 7 121010 1 EEAF 131306 131808 24 230 3ø 3 815304 6 4 120011 5 #10 133000 7 121010 1 DEAG 131305 131809 24 416 3ø 3 or 4 815602 6 4 120010 3 #8 133100 4 121010 2 BEAG 131311 131809 24 460/480 3ø 3 or 4 815702 6 4 120011 3 #10 133000 4 121010 2 BEAG 131311 131809 20 208 1ø 2 815003 5 4 120010 2 #4 133300 2 121012 2 GEAG 131312 131811 20 230 1ø 2 815203 5 4 120011 2 #4 133300 2 121012 2 FEAG 131309 131811 20 380 3ø 3 or 4 815402 6 4 120010 3 #10 133000 4 121010 2 BEAG 131311 131809 Oven Assembly Complete does not include Oven Relay (contactor). This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable as well as if dryer has microprocessor controller (computer) or non-microprocessor controls. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 103 ADE-30/ADE-50 Electric Oven Component Application Charts For Models Mfd. prior to November 12, 1990 ADE-30 KW VOLTAGE PHASE WIRE O VEN A SSEMBLY PART NO .* ELEMENT Qty. Kw RELAY T ERMIN AL LU G B US B AR O VEN RELAY P ART NO. C OIL Qty. Size Part No. Qty. Part No. 121011 Cat. No. Part No. P ART NO. O VEN WIRE Part No. 30 208 3ø 3 815105 6 5 120012 6 #6 133200 7 121012 1 DEAG 131305 131809 30 208 3ø 4 815105 6 5 120012 6 #6 133200 7 121012 1 DEAF 131304 131808 30 230 3ø 3 815305 6 5 120013 5 #8 133100 7 121012 1 CEAG 131303 131809 30 416 3ø 3 or 4 815605 6 5 120012 3 #8 133100 4 121010 2 CEAG 131303 131809 30 460/480 3ø 3 or 4 815705 6 5 120013 3 #8 133100 4 121010 2 BEAG 131311 131809 25 380 3ø 3 or 4 815405 6 5 120012 3 #8 133100 4 121010 2 BEAG 131311 131809 24 208 3ø 3 815107 6 4 120010 5 #8 133100 7 121012 1 CEAG 131303 131809 24 208 3ø 4 815107 6 4 120010 5 #8 133100 7 121012 1 CEAF 131302 131808 24 230 3ø 3 815307 6 4 120011 5 #10 133000 7 121010 1 BEAG 131311 131809 24 416 3ø 3 or 4 815604 6 4 120010 3 #8 133100 4 121010 2 BEAG 131311 131809 24 460/480 3ø 3 or 4 815704 6 4 120011 3 #10 133000 4 121010 2 BEAG 131311 131809 20 208 1ø 2 815005 5 4 120010 2 #4 133330 2 121010 2 GEAG 131312 131811 20 230 1ø 2 815205 5 4 120011 2 #4 133330 2 121010 2 FEAG 131309 131811 20 380 3ø 3 or 4 815404 6 4 120010 3 #10 133000 4 121010 2 BEAG 131311 131809 15 208 3ø 3 815101 3 5 120012 3 #8 133100 4 121010 2 CEAG 131303 131809 15 208 3ø 4 815101 3 5 120012 3 #8 133100 4 121010 2 CEAF 131302 131808 15 230 3ø 3 815301 3 5 120013 3 #8 133100 4 121010 2 BEAG 131311 131809 ADE-50 KW VOLTAGE PHASE WIRE OV EN ASSEMBLY P ART NO.* 30 208 3ø 3 815106 6 5 120012 6 #6 133200 7 121010 1 30 208 3ø 4 815106 6 5 120012 6 #6 133200 7 121010 30 230 3ø 3 815306 6 5 120013 5 #8 133100 7 121010 30 416 3ø 3 or 4 815603 6 5 120012 3 #8 133100 4 121010 * E LEMEN T Qty. Kw Part No. RELAY T ERMIN AL L U G B US BA R OVEN R ELA Y PAR T N O. C OIL Part No. Qty. Part No. 121011 Cat. No. Part No. P ART NO. OVEN WIRE Qty. Size FEAG 131305 131809 1 FEAF 131304 131808 1 EEAG 131303 131809 - CEAG 131303 131809 30 460/480 3ø 3 or 4 815703 6 5 120013 3 #8 133100 4 121010 - BEAG 131311 131809 25 380 3ø 3 or 4 815403 6 5 120012 3 #8 133100 4 121010 - BEAG 131311 131809 24 208 3ø 3 815104 6 4 120010 5 #8 133100 7 121010 1 EEAG 131303 131809 24 208 3ø 4 815104 6 4 120010 5 #8 133100 7 121010 1 EEAF 131302 131809 24 230 3ø 3 815304 6 4 120011 5 #10 133000 7 121010 1 BEAG 131311 131809 24 416 3ø 3 or 4 815602 6 4 120010 3 #8 133100 4 121010 - BEAG 131311 131809 131809 24 460/480 3ø 3 or 4 815702 6 4 120011 3 #10 133000 4 121010 - BEAG 131311 20 208 1ø 2 815003 5 4 120010 2 #4 133300 2 121012 - GEAG 131312 131811 20 230 1ø 2 815203 5 4 120011 2 #4 133300 2 121012 - FEAG 131309 131811 20 380 3ø 3 or 4 815402 6 4 120010 3 #10 133000 4 121010 - BEAG 131311 131809 Oven Assembly Complete does not include Oven Relay (contactor). This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable as well as if dryer has microprocessor controller (computer) or non-microprocessor controls. Telephone: (508) 678-9000 Fax: (508) 678-9447 104 Additional Parts Available Part No. Description 112039 112090 112280 112530 112531 114001 114006 120100 120200 120300 120400 120500 120600 120707 120708 120800 120802 120902 120903 121014 121026 121499 121500 121503 122804 404500 404502 404506 404507 880200 “Black/White/Green Ground” Label “Phase 4 OPL Program Location Summary” Label “Clean Lint Screen” Label “Coin Program Location Summary” Label “Phase 3 OPL Program Location Summary” Label “CAUTION - Exhaust/Lint Screen” Label “WARNING - Fire Hazards” Label 3/8” Straight (BX) Connector 3/8” x 90° (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX retainer clip) 3/8” Greenfield (BX) 2-Position Terminal Strip 3-Position Terminal Strip 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Closed End Connector 1/4” Insulated (female) Terminal Tab Receptacle Combination 5-1/2” Harness Tie 7” Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) For Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Almond “B” Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Electrical Terminal (assortment) Kit American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADC 450096 1- 01/28/92-100 4* 03/21/94-100 7* 12/27/00-25 2- 05/07/92-200 5- 01/24/95-200 3- 10/19/92-200 6* 05/28/97-200

Ad-30/ad-50 1987 Thru 1991 (p/n: 450096)

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.