Transcript
AD-330/AD-320 Parts Manual 24 VAC Phase 5 For Models Manufactured as of July 2002
American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 e-mail:
[email protected] www.amdry.com
080702WM/mcronan
ADC Part No. 450212
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
POUR VOTRE SÉCURITÉ
FOR YOUR SAFETY
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ____________________________
MODEL NO.
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s)
________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents AD-330 Coin and Debit Card Control Door Assembly ........................................................................... 3 AD-320 Coin and Debit Card Control Door Assembly ........................................................................... 4 AD-330 OPL Control Door Assembly .................................................................................................... 5 AD-320 OPL Control Door Assembly .................................................................................................... 6 AD-330 Lint Door Assembly .................................................................................................................. 7 AD-320 Lint Door Assembly .................................................................................................................. 8 AD-330 Lint Drawer (Basket) Assembly ................................................................................................ 9 AD-320 Lint Drawer (Basket) Assembly .............................................................................................. 10 AD-330 Locking Lint Drawer (Basket) Assembly ................................................................................. 11 AD-320 Locking Lint Drawer (Basket) Assembly ................................................................................. 12 Single Hanke Coin, DMC Control Panel Assembly For Domestic Single Coin (25¢) Models ......................................................................................... 13 Dual Coin, Hanke Control Panel Assembly ............................................................................................ 14 OPL Microprocessor (DMC) Control Panel Assembly .......................................................................... 15 Hanke Microprocessor Coin Acceptor Listing ....................................................................................... 16 Coin Vault Assembly ............................................................................................................................. 17 DMC Control Box Assembly .......................................................................................................... 18, 19 AD-330/AD-320 Cold Rolled Steel (CRS) Door Top Front Panel ........................................................ 20 AD-330/AD-320 Cold Rolled Steel (CRS) Door Bottom Front Panel ................................................... 21 Main Door Cold Rolled Steel (CRS) Assembly ..................................................................................... 22 Main Door Switch Assembly For Cold Rolled Steel (CRS) Type Door .................................................. 23 AD-330 Basket (Tumbler)/Support Assemblies ..................................................................................... 24 AD-320 Basket (Tumbler)/Support Assemblies ..................................................................................... 25 Basket (Tumbler) Brush Assembly ......................................................................................................... 26 Temperature Sensor Probe Assembly .................................................................................................... 27 Basket (Tumbler) Bearing Assembly ................................................................................................ 28, 29
AD-330 Lint Drawer (Basket) Switch Assembly ................................................................................... 30 AD-320 Lint Drawer (Basket) Switch Assembly ................................................................................... 31 Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies ....................................................... 32, 33 AD-330 Gas Train Assembly .......................................................................................................... 34, 35 AD-320 Gas Train Assembly .......................................................................................................... 36, 37 Electric Oven Assembly .................................................................................................................. 38, 39 Burner Box/Piping Assemblies ............................................................................................................... 40 ADS-330/ADS-320 Steam Damper Assembly ..................................................................................... 41 Sail Switch Assembly ............................................................................................................................ 42 Back Guard Assemblies ........................................................................................................................ 43 Optional Gas Piping and Exhaust Ducting Kits ....................................................................................... 44 12-Rib 95” (J) Poly Belt Arrangement ................................................................................................... 45 Bottom Exhaust Duct Assembly and Cabinet Hi-Limit ............................................................................ 46 Electric Oven Component Chart ........................................................................................................... 47 Step Down Transformer Usage Listing .................................................................................................. 48 Additional Parts Available ..................................................................................................................... 49
3
AD-330 Coin and Debit Card Control Door Assembly
Illus. No. 1
2 3 4 5
Part No.
Qty.
883394
1
883396
1
883395
1
883420
1
160040 160140 117605 117603
2 2 2
Telephone: (508) 678-9000
Description AD-330 White Coin Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-330 Ivory Coin Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-330 Coral Blue Coin Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-330 Stainless Steel Coin Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) ACE® Lock Assembly (no key) Key ONLY (key number XX4451) Neoprene Gasket Tape (sold by the foot) Neoprene Gasket Tape (sold by the foot)
Fax: (508) 678-9447
4
AD-320 Coin and Debit Card Control Door Assembly
Illus. No. 1
2 3 4 5
Part No.
Qty.
883441
1
883442
1
883443
1
883444
1
160040 160140 117605 117603
2 2 2
American Dryer Corporation
Description AD-320 White Coin and Debit Card Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-320 Ivory Coin and Debit Card Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-320 Coral Blue Coin and Debit Card Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-320 Stainless Steel Coin and Debit Card Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) ACE® Lock Assembly (no key) Key ONLY (key number XX4451) Neoprene Gasket Tape (sold by the foot) Neoprene Gasket Tape (sold by the foot)
88 Currant Road / Fall River, MA 02720-4781
AD-330 OPL Control Door Assembly
Illus. No. 1
2 3 4 5
Part No.
Qty.
883408
1
883410
1
883409
1
160040 160140 117605 117603
2 2 2
Telephone: (508) 678-9000
5
Description AD-330 White OPL Control Door Assembly (includes illus. nos. 1, 4, and 5) AD-330 Ivory OPL Control Door Assembly (includes illus. nos. 1, 4, and 5) AD-330 Coral Blue OPL Control Door Assembly (includes illus. nos. 1, 4, and 5) ACE® Lock Assembly (no key) Key ONLY (key number XX4451) Neoprene Gasket Tape (sold by the foot) Neoprene Gasket Tape (sold by the foot)
Fax: (508) 678-9447
6
AD-320 OPL Control Door Assembly
Illus. No. 1
2 3 4 5
Part No.
Qty.
883445
1
883447
1
883446
1
160040 160140 117605 117603
2 2 2
American Dryer Corporation
Description AD-320 White OPL Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-320 Ivory OPL Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) AD-320 Coral Blue OPL Control Door Assembly Less Locks (includes illus. nos. 1, 4, and 5) ACE® Lock Assembly (no key) Key ONLY (key number XX4451) Neoprene Gasket Tape (sold by the foot) Neoprene Gasket Tape (sold by the foot)
88 Currant Road / Fall River, MA 02720-4781
AD-330 Lint Door Assembly
Illus. No. 1 2
3 4
Part No.
Qty.
150314 883432
4 1
883431
1
883433
1
154011 117604
4 3
Telephone: (508) 678-9000
7
Description #10-32 x 1/2” TORX + BTN Head Machine Screw AD-330 White Lint Door Assembly (includes illus. nos. 2 and 4) AD-330 Ivory Lint Door Assembly (includes illus. nos. 2 and 4) AD-330 Coral Blue Lint Door Assembly (includes illus. nos. 2 and 4) #10-32 Multi-Thread U-Nut Neoprene Gasket Tape (sold by the foot)
Fax: (508) 678-9447
8
AD-320 Lint Door Assembly
Illus. No. 1
2 3 4
Part No.
Qty.
883463
1
883464
1
883465
1
117604 150314 154011
3 4 4
American Dryer Corporation
Description AD-320 White Lint Door Assembly (includes illus. nos. 1 and 2) AD-320 Ivory Lint Door Assembly (includes illus. nos. 1 and 2) AD-320 Coral Blue Lint Door Assembly (includes illus. nos. 1 and 2) Neoprene Gasket Tape (sold by the foot) #10-32 x 1/2” TORX + BTN Head Machine Screw #10-32 Multi-Thread U-Nut
88 Currant Road / Fall River, MA 02720-4781
9
AD-330 Lint Drawer (Basket) Assembly
Illus. No. 1
Part No.
Qty.
883401
1
883402
1
883403
1
883404
1
2 3
117604 ---------
3 1
4
---------
1
Description AD-330 White Lint Drawer (basket) Assembly Complete (includes illus. nos. 1 and 2) AD-330 Ivory Lint Drawer (basket) Assembly Complete (includes illus. nos. 1 and 2) AD-330 Coral Blue Lint Drawer (basket) Assembly Complete (includes illus. nos. 1 and 2) AD-330 Black Lint Drawer (basket) Assembly Complete For Stainless Steel Models ONLY Neoprene Sponge Tape (sold by the foot) Temperature Sensor Bracket (refer to Temperature Sensor Probe Assembly on page 27) Lint Drawer (basket) Switch (refer to AD-330 Lint Drawer [Basket] Switch Assembly on page 30)
IMPORTANT: For models with optional lock refer to AD-330 Locking Lint Drawer (Basket) Assembly on page 11. Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Illus. No. 1
AD-320 Lint Drawer (Basket) Assembly
Part No.
Qty.
883455
1
883457
1
883456
1
883458
1
2 3
117604 ---------
1 1
4
---------
1
Description AD-320 White Lint Drawer (basket) Assembly Complete (includes illus. nos. 1 and 2) AD-320 Ivory Lint Drawer (basket) Assembly Complete (includes illus. nos. 1 and 2) AD-320 Coral Blue Lint Drawer (basket) Assembly Complete (includes illus. nos. 1 and 2) AD-320 Black Lint Drawer (basket) Assembly Complete For Stainless Steel Models ONLY Neoprene Sponge Tape (sold by the foot) Temperature Sensor Bracket (refer to Temperature Sensor Probe Assembly on page 27) Lint Drawer (basket) Switch (refer to AD-320 Lint Drawer [Basket] Switch Assembly on page 31)
IMPORTANT: For models with optional lock refer to AD-320 Locking Lint Drawer (Basket) Assembly on page 12. American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-330 Locking Lint Drawer (Basket) Assembly
Illus. No. 1
Part No.
Qty.
883397
1
883398
1
883399
1
883400
1
2 3
117604 ---------
3 1
4
---------
1
5
160038 160140 160034
1 1 1
Telephone: (508) 678-9000
11
Description AD-330 White Locking Lint Drawer (basket) Assembly Less Lock and Key (includes illus. nos. 1 and 2) AD-330 Ivory Locking Lint Drawer (basket) Assembly Less Lock and Key (includes illus. nos. 1 and 2) AD-330 Coral Blue Locking Lint Drawer (basket) Assembly Less Lock and Key (includes illus. nos. 1 and 2) AD-330 Black Locking Lint Drawer (basket) Assembly Less Lock and Key for Stainless Steel Models ONLY Neoprene Sponge Tape (sold by the foot) Temperature Sensor Bracket (refer to Temperature Sensor Probe Assembly on page 27) Lint Drawer (basket) Switch (refer to AD-330 Lint Drawer [Basket] Switch Assembly on page 30) Lint Drawer Lock Assembly (keyed to number XX4451) Key ONLY (key number XX4451) Cam ONLY
Fax: (508) 678-9447
12
Illus. No. 1
AD-320 Locking Lint Drawer (Basket) Assembly
Part No.
Qty.
883459
1
883460
1
883461
1
883462
1
2 3
117604 ---------
3 1
4
---------
1
5
160038 160140 160034
1 1 1
American Dryer Corporation
Description AD-320 White Locking Lint Drawer (basket) Assembly Complete Less Lock (includes illus. nos. 1 and 2) AD-320 Ivory Locking Lint Drawer (basket) Assembly Complete Less Lock (includes illus. nos. 1 and 2) AD-320 Coral Blue Locking Lint Drawer (basket) Assembly Complete Less Lock (includes illus. nos. 1 and 2) AD-320 Black Locking Lint Drawer (basket) Assembly Complete Less Lock for Stainless Steel Models ONLY Neoprene Sponge Tape (sold by the foot) Temperature Sensor Bracket (refer to Temperature Sensor Probe Assembly on page 27) Lint Drawer (basket) Switch (refer to AD-320 Lint Drawer [Basket] Switch Assembly on page 31) Lint Drawer Lock Assembly (keyed to number XX4451) Key ONLY (key number XX4451) Cam ONLY
88 Currant Road / Fall River, MA 02720-4781
Single Hanke Coin, DMC Control Panel Assembly
13
For Domestic Single Coin (25¢) Models
Illus. No. 1 2
Part No.
Qty.
112566 881482
1 1
881485
1
881483
1
4 5 6
137234 824998 153010 150005 ---------
1 1 2 2 -
7 8 9 10
881143 150309 136048 152102
1 1 2 4
3
Telephone: (508) 678-9000
Description Hanke Single Coin Twin Keyboard (touch pad) Label Single Coin Control Panel Complete Less Acceptor - 24 VAC (includes illus. nos. 1 through 5, 9, and 10) Microprocessor Control Panel Complete with Battery Option - 24 VAC (includes illus. nos. 1 through 5, 9, and 10) Hanke Dual Microprocessor Controller (DMC) Control Panel with Keyboard (touch pad) Label ONLY (includes illus. nos. 1 and 2) Phase 5 Dual Microprocessor Controller (DMC) ONLY Phase 5 Battery Clip...Not Illustrated #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor with Optic Switch (refer to Hanke Microprocessor Coin Acceptor Listing on page 16) Hanke Optical Switch ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse M3 Metric Hex Nut
Fax: (508) 678-9447
14
Illus. No. 1 2
Dual Coin, Hanke Control Panel Assembly
Part No.
Qty.
112567 881626
1 1
881627
1
4 5 6
881628 137234 824998 153010 150005 ---------
1 1 1 2 2 -
7 8 9 10
881143 150309 136048 152102
1 1 2 4
3
American Dryer Corporation
Description Hanke Dual Coin Keyboard (touch pad) Label Hanke Phase 5 Dual Coin Control Panel Assembly Complete Less Acceptor (includes illus. nos. 1 through 5, 9, and 10) Hanke Dual Coin Control Panel with Label ONLY (includes illus. nos. 1 and 2) Hanke Dual Coin Control Panel ONLY Phase 5 Dual Microprocessor Controller (DMC) ONLY Phase 5 Battery Clip...Not Illustrated #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor with Optic Switch (refer to Hanke Microprocessor Coin Acceptor Listing on page 16) Hanke Optical Switch ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse M3 Metric Hex Nut
88 Currant Road / Fall River, MA 02720-4781
15
OPL Microprocessor (DMC) Control Panel Assembly
Illus. No. 1 2
3 4 5 6 7
Part No.
Qty.
112559 824009
1 1
824011
1
882232 137234 824998 153010 150005 150309 136048
1 1 1 2 2 1 2
Telephone: (508) 678-9000
Description OPL Keyboard (touch pad) Label ONLY OPL Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 5 and 7) OPL Control Panel Assembly Complete with Battery Option - 24 VAC (includes illus. nos. 1 through 5 and 7) OPL Control Panel ONLY Phase 5 Dual Microprocessor Controller (DMC) ONLY Phase 5 Battery Clip...Not Illustrated #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse
Fax: (508) 678-9447
16
Hanke Microprocessor Coin Acceptor Listing
NOTE: Coin acceptors listed include optical switch(es).
Single Coin* ADC Part No.
Nation
881163 881450 881451 881636 881546
United States Canada --------Japan
Description 25¢ Optic Coin Acceptor 25¢ Canadian Optic Coin Acceptor 0.880 x 0.062 Token Optic Coin Acceptor 0.800 x 0.07 Token Optic Coin Acceptor 100 Yen Optic Coin Acceptor
Dual Coin* ADC Part No.
Nation
881609 881610
France Belgium
Description 2/5 French Franc Dual Optic Coin Acceptor 5/20 Belgian Franc Dual Optic Coin Acceptor
* Consult factory for coin acceptors not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
17
Coin Vault Assembly
Illus. No. 1
*
Part No.
Qty.
2* 3* 4 5
883347 883348 883393 160036 160136 883382 --------
1 1 1 1 1 1 1
6
152014
4
Description AD-330/AD-320 Coin Box Assembly with Black Faceplate Less Lock AD-330/AD-320 Black Coin Box Faceplate ONLY AD-330/AD-320 Black Debit Card/OPL Faceplate ACE® Lock Assembly with Key ACE® Key ONLY AD-330/AD-320 Coin Vault Assembly ONLY AD-330/AD-320 Bottom Front Panel Assembly Complete with Hinge (refer to AD-330/AD-320 Cold Rolled Steel [CRS] Door Bottom Front Panel on page 21) 1/4-20 Free Spin Wash Nut
Specify key number when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
18
Illus. No. 1
DMC Control Box Assembly
Part No.
Qty.
824439
1
824437
1
824438
1
2 3
150103 141403
2 1
4 5
151001 151000
2 1
American Dryer Corporation
Description AD-330/AD-320 Electric Box Complete - 120 Volt (includes illus. nos. 1 through 17, 20, 21, and 24 through 27) AD-330/AD-320 Electric Box Complete - 208 Volt (includes illus. nos. 1 through 17, 20, 21, and 24 through 27) AD-330/AD-320 Electric Box Complete - 240 Volt (includes illus. nos. 1 through 17, 20, 21, and 24 through 27) #8-32 x 3/4” Phillips Round Head Machine Screw Transformer - 24 VAC (gas models Only) (for electrically heated models refer to page 48) #8-32 Pal Nut #6-32 Pal Nut
88 Currant Road / Fall River, MA 02720-4781
19
DMC Control Box Assembly
Illus. No. 6* 7 8* 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ---
Part No. 136008 150002 136057 150002 120715 151000 150103 132451 151001 824828 122626 122705 122704 122625 137025 122631 122705 122704 122630 137025 150309 121010 122626 122705 122704 122625 137025 121494 122801 122800
Qty. ** 1 3** 2 1 2 4 2 4 2 1 9 9 1 1 1 6 6 1 1 1 1 1 7 7 1 1 10 1 1
Description 3-Position Fuse Block #6-32 x 1” Round Head Machine Screw 1/2-Amp (Slo-Blo) Fuse ONLY #6-32 x 1” Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut #8-32 x 3/4” Phillips Round Head Machine Screw 2-Pole Contactor #8-32 Pal Nut RC Network with Connectors 15-Pin Socket Connector ONLY Socket Terminal ONLY Pin Terminal ONLY 15-Pin Connector ONLY 6/15-Position Strain Relief...Not Illustrated 6-Pin Socket Connector ONLY Socket Terminal ONLY Pin Terminal ONLY 6-Pin Connector ONLY 6/15-Position Strain Relief...Not Illustrated #10-16 x 1/2” Hex Head TEK Crimptite Screw L-70 Terminal Lug 15-Pin Socket Connector ONLY Socket Terminal ONLY Pin Terminal ONLY 15-Pin Connector ONLY 6/15-Position Strain Relief...Not Illustrated Push-Mount Wire Tie Pin/Socket Extraction Tool...Not Illustrated Microprocessor (female) Pin Extraction Tool
* Check fuse rating for verification. ** For 120 volt application the quantity is 1. For 208/240 volt application the quantity is 2.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Illus. No. 1
2 3 4 5 6 7
AD-330/AD-320 Cold Rolled Steel (CRS) Door Top Front Panel
Part No.
Qty.
883411
1
883413
1
883412
1
883415
1
154215 170330 150313 881152 881208 881151 881209 150445 150443
2 1 8 1 1 1 1 4 4
American Dryer Corporation
Description AD-330/AD-320 White Front Panel Assembly (includes illus. nos. 1 through 3) AD-330/AD-320 Ivory Front Panel Assembly (includes illus. nos. 1 through 3) AD-330/AD-320 Coral Blue Front Panel Assembly (includes illus. nos. 1 through 3) AD-330/AD-320 Stainless Steel Front Panel Assembly (includes illus. nos. 1 through 3) 1/8” Pop Rivet Friction Door Latch #10-16 x 1/2” TORX + BTN Head Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Block Assembly 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
88 Currant Road / Fall River, MA 02720-4781
AD-330/AD-320 Cold Rolled Steel (CRS) Door Bottom Front Panel
Illus. No. 1
Part No.
Qty.
883405
1
883407
1
883406
1
883414
1
883411
1
883413
1
883412
1
883415
1
2 3 4 5
154215 170330 150313 881152
2 1 8 1
6
881208 881151
1 1
881209
1
150445 150443
4 4
7
Telephone: (508) 678-9000
21
Description White Bottom Front Panel Assembly (for coin models Only) (includes illus. nos. 1 through 3) Ivory Bottom Front Panel Assembly (for coin models Only) (includes illus. nos. 1 through 3) Coral Blue Bottom Front Panel Assembly (for coin models Only) (includes illus. nos. 1 through 3) Stainless Steel Bottom Front Panel Assembly (for coin models Only) (includes illus. nos. 1 through 3) White OPL Bottom Front Panel Assembly (includes illus. nos. 1 through 3) Ivory OPL Bottom Front Panel Assembly (includes illus. nos. 1 through 3) Coral Blue OPL Bottom Front Panel Assembly (includes illus. nos. 1 through 3) Stainless Steel OPL Bottom Front Panel Assembly (includes illus. nos. 1 through 3) 1/8” Pop Rivet Friction Door Latch #10-16 x 1/2” TORX + BTN Head Screw Black Top Hinge Block Assembly (includes illus. nos. 5 and 7) Stainless Steel Top Hinge Block Assembly Black Bottom Hinge Block Assembly (includes illus. nos. 6 and 7) Stainless Steel Bottom Hinge Block Assembly (includes illus. nos. 6 and 7) 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
Fax: (508) 678-9447
22
Illus. No.
Main Door Cold Rolled Steel (CRS) Assembly
Part No.
Qty.
1
881150
1
2
3
102354 170730 170731 881152
1 1 1 1
4 5 6
150445 153031 881151
2 1 1
7
150445 150443 150683 152014 151010 150120 150683 152014 881210 102218 170731 151013
2 2 3 3 1 1 3 3 1 1 1 4
8 9 10 11 12 13 14 15 16
American Dryer Corporation
Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY 20-7/16” Door Glass Black Glass Adhesive (10.3 oz. cartridge) #10-32 Black Nylon Acorn Nut
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly For Cold Rolled Steel (CRS) Type Door
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
153566 152013 153010 137005 122636 881211
2 2 2 1 2 1
7
150301
2
Telephone: (508) 678-9000
23
Description #6-32 x 7/8” Clinch Stud #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch Flag Terminal Main Door Switch Housing (includes illus. nos. 1 through 3 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
24
Illus. No. 1
Part No.
Qty.
800763
1
800765
1
800722*
1
800740*
1
150313 301315 301316 301433 301434 115986 882050
30 2 1 2 1 1 3
12
153004 850066 152027 153005 153004 115999 401010 100173
3 1 3 3 3 1 1 1
13 14
115992 100812
1 1
2 3
4 5 6 7 8 9 10 11
*
AD-330 Basket (Tumbler)/Support Assemblies
Description Basket (tumbler) and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11, 13, and 14) Stainless Steel Basket (tumbler) and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11, 13, and 14) Basket (tumbler) ONLY without Felt (includes illus. nos. 1 through 3) Stainless Steel Basket (tumbler) ONLY without Felt Collars (includes illus. nos. 1 through 3) #10-16 x 1/2” TORX + BTN Head Screw Short Basket (tumbler) Rib ONLY Tall Basket (tumbler) Rib ONLY Stainless Steel Short Basket Rib Stainless Steel Tall Basket Rib 1/4” x 2” Basket (tumbler) Felt Pad Tie Rod (includes illus. nos. 5, 6, and 8 through 10) 3/8” Flat Washer Basket (tumbler) Support ONLY 3/8-18 Hex Lock Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5 oz. tube) 12-Rib 95” (J) Poly Belt (refer to 12-Rib 95” [J] Poly Belt Arrangement on page 45) Inner Ring Felt Collar ONLY 1-3/8” Retaining Ring
Felt collars are not included and must be ordered separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
25
AD-320 Basket (Tumbler)/Support Assemblies
Illus. No. 1
Qty.
800835
1
800760
1
800726*
1
800739*
1
150313 301318 301317 301432 301431 115986 882051
30 2 1 2 1 1 3
12
153004 850066 152027 153005 153004 115999 401010 100173
3 1 3 3 3 1 1 1
13 14
115992 100812
1 1
2 3
4 5 6 7 8 9 10 11
*
Part No.
Description Basket (tumbler) and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11, 13, and 14) Stainless Steel Basket (tumbler) and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11, 13, and 14) Basket (tumbler) ONLY without Felt (includes illus. nos. 1 through 3) Stainless Steel Basket (tumbler) ONLY without Felt Collars (includes illus. nos. 1 through 3) #10-16 x 1/2” TORX + BTN Head Screw Short Basket (tumbler) Rib ONLY Tall Basket (tumbler) Rib ONLY Stainless Steel Short Basket (tumbler) Rib Stainless Steel Tall Basket (tumbler) Rib 1/4” x 2” Basket (tumbler) Felt Pad Tie Rod (includes illus. nos. 5, 6, and 8 through 10) 3/8” x 1-1/2” Fender Washer Basket (tumbler) Support ONLY 3/8-18 Hex Lock Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5 oz. tube) 12-Rib 95” (J) Poly Belt (refer to 12-Rib 95” [J] Poly Belt Arrangement on page 45) Inner Ring Felt Collar ONLY 1-3/8” Retaining Ring
Felt collars are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
Illus. No. 1 2 3 4 5 6 7 8
Basket (Tumbler) Brush Assembly
Part No. 170198 317656 154210 120117 317651 102325 154210 100173
Qty. 2 2 6 2 1 1 2 1
American Dryer Corporation
Description AD-330/AD-320 Drive Belt Sealing Brush AD-330/AD-320 Sealing Brush Clip End 5/32” x 3/16” Pop Rivet 3/8” EMT Hanger AD-330/AD-320 Wrapper Gasket Strip 8-1/2” x 1-1/2” x 1/8” Wrapper Channel Gasket 5/32” x 3/16” Pop Rivet 12-Rib 95” (J) Poly Belt (refer to 12-Rib 95” [J] Poly Belt Arrangement on page 45)
88 Currant Road / Fall River, MA 02720-4781
27
Temperature Sensor Probe Assembly
Illus. No.
Part No.
Qty.
1
801409
1
2 3 4 5 6 7
150000 153010 130106 152013 154007 880111
2 2 1 2 2 1
8 9 10 11
122701 122605 122700 122604 122801 121405 150301
8 2 8 2 1 2 2
12 13
Telephone: (508) 678-9000
Description AD-330/AD-320 Temperature Sensor Bracket Assembly Complete (includes illus. nos. 1 through 9, 12, and 13) #6-32 x 1/4” Round Head Machine Screw #6 Star Washer 170° Large Thermostat #6-32 Hex Nut 1/4” Tinnerman Push On Fastener Dual Microprocessor Controller (DMC) 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 6 through 9) Socket Terminal ONLY 4-Pin Socket Connector ONLY Pin Terminal ONLY 4-Pin Connector ONLY Pin/Socket Extraction Tool...Not Illustrated Rubber Grommet #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
28
Basket (Tumbler) Bearing Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
29
Basket (Tumbler) Bearing Assembly
Illus. No. 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17
Part No.
Qty.
880203 153005 152005 882544
1 4 4 1
882545
1
882542 882543 880202 880779 150601 153004 153005 152005 154326 152004 150621 153002 150501 102120 824807 150610
1 1 1 1 2 8 2 2 2 4 2 4 4 1 1 2
Telephone: (508) 678-9000
Description 1-3/8” Flange Bearing ONLY 3/8” Lock Washer 3/8-16 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 14 and 17) Bearing Assembly Complete (for models mfd. with rotational sensor) (includes illus. nos. 4 through 17) Bearing Support ONLY Bearing Support ONLY (for models mfd. with rotational sensor) 1-3/8” Pillow Block Bearing ONLY 1-3/8” Pillow Block Bearing (for models mfd. with rotational sensor) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew (black) 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet Rotational Sensor Assembly (for models mfd. with rotational sensor) 5/16-18 x 1-1/2” Allen Setscrew
Fax: (508) 678-9447
30
Illus. No. 1 2
3 4 5 6 7 8 9
10 11 12
AD-330 Lint Drawer (Basket) Switch Assembly
Part No.
Qty.
150006 802816
2 1
307204 136990 152013 122604 122700 122605 122701 122801 824848
1 1 2 2 4 2 4 1 1
824849
1
150309 150309 307203
2 2 1
American Dryer Corporation
Description #6-32 x 7/8” Round Head Machine Screw AD-330 Lint Drawer (basket) Switch Assembly Complete (includes illus. nos. 1 through 4 and 7 through 9) AD-330 Lint Switch Mounting Bracket ONLY AD-330 Lint Drawer (basket) Safety Switch ONLY #6-32 Hex Nut 4-Pin Connector ONLY Pin Terminal ONLY 4-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated AD-330 Lint Switch Bottom Harness (includes illus. nos. 7 through 9) AD-330 Lint Switch Top Harness (includes illus. nos. 7 through 9) #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw AD-330 Lint Switch Cover ONLY
88 Currant Road / Fall River, MA 02720-4781
AD-320 Lint Drawer (Basket) Switch Assembly
Illus. No. 1 2 3 4 5 6 7 8 9 10 ---
Part No. 304039 122605 122701 122604 122700 136992 150006 152013 824848 824849 150309 122801
Qty. 1 2 4 2 4 1 2 2 1 1 2 1
Telephone: (508) 678-9000
31
Description AD-320 Lint Drawer (basket) Switch Bracket/Cover 4-Pin Socket Connector ONLY Socket Terminal ONLY 4-Pin Connector ONLY Pin Terminal ONLY AD-320 Lint Drawer (basket) Safety Switch ONLY #6-32 x 7/8” Round Head Machine Screw #6-32 Hex Nut AD-320 Lint Switch Bottom Harness AD-320 Lint Switch Top Harness #10-16 x 1/2” Hex Head TEK Crimptite Screw Pin/Socket Extraction Tool...Not Illustrated
Fax: (508) 678-9447
32
Illus. No.
Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies
Part No.
Qty.
1
882910 801019
1 1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121350 154266 100250 150600 157010 154276 154275 152005 153005 850135 153001 153002 150501 153001 153002 150501 100064
1 1 1 1 1 1 1 2 1 1 2 2 2 2 2 2 1
100049
1
101097 101099 154327 101096 153024
1 1 1 1 1
19 20 21 22
American Dryer Corporation
Description AD-330/AD-320 Upper and Lower Idler Arm ONLY AD-330/AD-320 Upper and Lower Idler Arm Assembly with Hardware (includes illus. nos. 1 through 10) 13/32” x 3/8” I.D. Bronze 3/8” x 3/8” Shoulder Screw AD-330/AD-320 Back Side Idler Assembly 3/8-16 x 1-1/2” Hex Head Machine Bolt 1-7/8” Extension Spring 1/4-20 x 5/8” Shoulder Bolt 3/8-16 x 3-3/8” Spade Bolt 3/8-16 Hex Nut 3/8” Lock Washer AD-330/AD-320 Idler Angle 5/16” Flat Washer 5/16” Lock Washer 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Flat Washer 5/16” Lock Washer 5/16-18 x 3/4” Hex Head Machine Bolt 1/3 HP 120/230v 1ø 60 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor with Plug 1/3 HP 100-230v 1ø 50 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor with Plug AD-330/AD-320 Rear Motor Shaft Bushing (for 60 Hz models) AD-330/AD-320 Rear Motor Shaft Bushing (for 50 Hz models) 1/4-20 x 3/8” Socket Setscrew AD-330/AD-320 Front Motor Shaft Bushing (50/60 Hz) #10 Lock Washer
88 Currant Road / Fall River, MA 02720-4781
Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies (continued)
Illus. No. 23 24 25
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
Part No.
Qty.
150216 154279 800917 803918
1 4 1 1
803926
1
153001 153002 152004 137030 122701 122801 116010 150501 153002 153001 100173 117604 153054 100705 802831 802830 153051 153054 153040 153015 152025 152030 153525 850132
4 4 4 1 8 1 1 4 4 4 1 3 1 1 1 1 1 1 1 1 1 1 2 1
852104
1
880885 116011 153007 152002 880225 152014 314423 150212
1 1 2 2 1 4 1 2
Telephone: (508) 678-9000
33
Description #10-32 x 3/4” Left Hand Phillips Round Head Screw 5/16-18 x 3/4” Carriage Bolt AD-330/AD-320 Motor Mount ONLY 1/3 HP 120/230v 1ø 60 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor Mount Assembly Complete (includes illus. nos. 11 through 28 and 31) 1/3 HP 120/230v 1ø 50 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor Mount Assembly Complete (includes illus. nos. 11 through 28 and 31) 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut 8-Pin Housing Socket Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated AD-330/AD-320 Felt Motor Seal ONLY 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 12-Rib 95” Belt Neoprene Sponge Tape (sold by the foot) AD-330/AD-320 Motor Washer (for 50 Hz models) 3/16” x 3/16” x 1-3/8” Key 12-1/2” Riveted Impellor with 3/4” Bore (for 60 Hz models) 12-1/2” Riveted Impellor with 5/8” Bore (for 50 Hz models) 3/4” Flat Washer (for 60 Hz models) AD-330/AD-320 Motor Washer (for 50 Hz models) 3/4” Lock Washer (for 60 Hz models) 5/8” Lock Washer (for 50 Hz models) 3/4-16 Jam Nut (for 60 Hz models) 5/8-18 Jam Nut (for 50 Hz models) 1/4-20 x 1” Self-Clinching Stud AD-330/AD-320 Bearing Backup Plate (includes illus. nos. 43 and 44) AD-330/AD-320 Bearing Backup Plate Assembly (includes illus. nos. 43, 44, and 46 through 48) AD-330/AD-320 Impellor Cover AD-330/AD-320 Bearing Felt Seal 1/4” Lock Washer 1/4-20 Hex Nut 1/2” Flange Bearing 1/4-20 Free Spin Wash Nut AD-330/AD-320 Belt Guard #10-32 x 5/16” Phillips Pan Head Stainless Steel Screw
Fax: (508) 678-9447
34
American Dryer Corporation
AD-330 Gas Train Assembly
88 Currant Road / Fall River, MA 02720-4781
AD-330 Gas Train Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5
141130 128917 128918 318009 140856** 140810** 141225 318600 883436*
1 1 1 1 1 1 1 1 1
883437*
1
9 10 11 12 13 14 15 16
319522 318711 128935 152013 121300 150301 121499 142934 128927
1 1 1 2 2 4 6 1 1
17 18 19 20 21 22 23 24 25 26 27 28 29
880960 142506 318712 882157 143203 143259 151001 142805 153528 815974 141317 122701 122604 122700
1 1 1 1 1 1 8 1 8 1 1 2 1 2
6 7 8
35
Description Up-Shot Gas Burner Spark Ignitor Flame Sensor Burner Tube Bracket #23 Burner Orifice (natural gas) ONLY #42 Burner Orifice (liquid propane [L.P.] gas) ONLY Single-Port Manifold Manifold Bracket Direct Spark Ignition (DSI) Natural Gas Train Assembly Complete (includes illus. nos. 1 through 4, 6 through 14, 16 through 22, and 24 through 26) Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Train Assembly Complete (includes illus. nos. 1 through 4, 6 through 14, 16 through 22, and 24 through 26) AD-330 Gas Train Slide ONLY Notched Pipe Bracket Direct Spark Ignition (DSI) Module with Three Tries #6-32 Hex Nut Open/Closed Bushing #8-18 x 7/16” Phillips Pan Head TEK Screw 3/16” Push Mount Wire Tie 1/2” Coupling with Mounting Tabs 1/2” 24 VAC Direct Spark Ignition (DSI) Redundant Gas Valve (natural gas) ONLY Direct Spark Ignition (DSI) Gas Valve (liquid propane [L.P.] gas) ONLY 1/2” x 1/2” Street Elbow Gas Valve Pipe Bracket 1/4” Aluminum Tubing (12” length) Aluminum Tubing Adapter Aluminum Tubing Compression Fitting #8-32 Pal Nut 1/2” x 34-1/2” Pipe #8-32 x 1/2” Self-Clinching Stud Direct Spark Ignition (DSI) Module Mounting Bracket (Johnson) 1/2” Bronze Union Elbow Socket Terminal ONLY 4-Pin Connector ONLY Pin Terminal ONLY
* Orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
American Dryer Corporation
AD-320 Gas Train Assembly
88 Currant Road / Fall River, MA 02720-4781
AD-320 Gas Train Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5
141130 128917 128918 318009 140823** 140809** 141225 318600 883439*
1 1 1 1 1 1 1 1 1
883438*
1
9 10 11 12 13 14 15 16
319525 318711 128935 152013 121300 150301 121499 142934 128927
1 1 1 2 2 4 6 1 1
17 18 19 20 21 22 23 24 25 26 27 28 29
880960 142506 318712 882157 143203 143259 151001 142809 153528 815974 141317 122701 122604 122700
1 1 1 1 1 1 8 1 8 1 1 2 1 2
6 7 8
37
Description Up-Shot Burner Spark Ignitor Flame Sensor Burner Tube Bracket #26 Burner Orifice (natural gas) ONLY #43 Burner Orifice (liquid propane [L.P.] gas) ONLY Single-Port Manifold Manifold Bracket Direct Spark Ignition (DSI) Natural Gas Train Assembly Complete (includes illus. nos. 1 through 4, 6 through 14, 16 through 22, and 24 through 26) Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Train Assembly Complete (includes illus. nos. 1 through 4, 6 through 14, 16 through 22, and 24 through 26) AD-320 Gas Train Slide ONLY Notched Pipe Bracket Direct Spark Ignition (DSI) Module with Three Tries #6-32 Hex Nut Open/Closed Bushing #8-18 x 7/16” Phillips Pan Head TEK Screw 3/16” Push Mount Wire Tie 1/2” Coupling with Mounting Tabs 1/2” 24 VAC Direct Spark Ignition (DSI) Redundant Gas Valve (natural gas) ONLY Direct Spark Ignition (DSI) Gas Valve (liquid propane [L.P.] gas) ONLY 1/2” x 1/2” Street Elbow Gas Valve Pipe Bracket 1/4” Aluminum Tubing (12” length) Aluminum Tubing Adapter Aluminum Tubing Compression Fitting #8-32 Pal Nut 1/2” x 29-1/8” Pipe #8-32 x 1/2” Self-Clinching Stud Direct Spark Ignition (DSI) Module Mounting Bracket (Johnson) 1/2” Bronze Union Elbow Socket Terminal ONLY 4-Pin Connector ONLY Pin Terminal ONLY
* Orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
American Dryer Corporation
Electric Oven Assembly
88 Currant Road / Fall River, MA 02720-4781
39
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5
150300 318065 320656 150302 ---------
4 1 1 5 6
6 7 8 9 10 11 12 13 14 15 16 17
319703 151001 130400 320653 318651 150300 137027 320655 152014 121010 112075 ---------
1 2 1 1 1 2 1 1 1 1 1 1
18 19 20 21 22
824828 121011 153009 150212 ---------
1 * 15 15 *
23
150309
4
*
Description #10-16 x 1/2” Hex Washer TEK Screw Burner Box Clean Out Plate Back Plate Cover #6 x 3/8” Phillips Pan Head TEK Screw Heating Elements (refer to Electric Oven Component Chart on page 47) Hi-Limit Bracket #8-32 Pal Nut 290º Thermostat ADE-330/ADE-320 Stainless Steel Electric Reflector ADE-330/ADE-320 Oven Wire Bracket #10-16 x 1/2” Hex Washer TEK Screw Strain Relief ADE-330/ADE-320 Contactor Bracket 1/4-20 Free Spin Wash Nut L-70 Terminal Lug “GROUND HERE” Label Oven Contactor (refer to Electric Oven Component Chart on page 47) RC Network with Connectors Bus Bar #10 Star Washer #10-32 x 5/16” Phillips Pan Head Stainless Steel Screw Terminal Lug (refer to Electric Oven Component Chart on page 47) #10-16 x 1/2” Hex Head TEK Crimptite Screw
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Burner Box/Piping Assemblies
Illus. No.
Part No.
Qty.
1 2
881367 142805 142809 318700 150300 130403 150300 150309 130403 150300 881367 142805 142809 318700 150300 850854 850912 ---------
1 1 1 1 2 1 2 8 1 2 1 1 1 1 2 2 2 -
3 4 5 6 7 8 9 10 11 12 13 14 15 16
American Dryer Corporation
Description 1/2” Union Shut Off with Tail Piece 1/2” x 34-1/2” Pipe (for ADG-330 Only) 1/2” x 29-1/8” Pipe (for ADG-320 Only) Pipe Bracket #10-16 x 1/2” Hex Washer TEK Screw 330º Burner Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 330º Burner Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw 1/2” Union Shut Off with Tail Piece 1/2” x 34-1/2” Pipe (for ADG-330 Only) 1/2” x 29-1/8” Pipe (for ADG-320 Only) Pipe Bracket #10-16 x 1/2” Hex Washer TEK Screw ADG-330/ADG-320 Burner Box without Flame Spreader ADG-330/ADG-320 Flame Spreader Sail Switch (refer to Sail Switch Assembly on page 42)
88 Currant Road / Fall River, MA 02720-4781
41
ADS-330/ADS-320 Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3
850875 165035 100540
1 1 1
4 5 6 7 8 9 10 11 12 13
115994 100471 100534 143110 100472 100498 100520 150002 122701 122605 122801 153560 153008 152013
1 1 1 1 1 1 1 2 2 1 1 8 10 10
14 15 16
Telephone: (508) 678-9000
Description ADS-330/ADS-320 Steam Damper Assembly ADS-330/ADS-320 Steam Coil Assembly Steam Damper Piston (cylinder) Assembly with Pivots and Clevis (includes illus. nos. 4 through 10) Needle Valve Gasket 1/4” x 10/32” Connector (male) Needle Valve 1/4” Poly-Flo Tubing 1/4” Poly x 1/8” M.P.T. Connector 3-Way Micro Valve 1/8” N.P.T. Silencer (muffler) #6-32 x 1” Round Head Machine Screw Socket Terminal ONLY 4-Pin Socket Connector (female) Pin/Socket Extraction Tool...Not Illustrated #6-32 x 1/2” Self-Clinching Stud #6 Lock Washer #6-32 Hex Nut
Fax: (508) 678-9447
42
Illus. No.
Sail Switch Assembly
Part No.
Qty.
1
319202 802805
1 1
2 3 4 5
105550 154002 150303 122200 802807
1 1 2 1 1
6 7 8 9 10
319208 154004 150001 153010 152000
1 1 2 2 2
American Dryer Corporation
Description Sail Switch Damper AD-330/AD-320 Sail Switch Rod and Damper Assembly (includes illus. nos. 1 through 3) AD-330/AD-320 Sail Switch Rod 1/8” Push On Fastener #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY AD-330/AD-320 Sail Switch Bracket Assembly (includes illus. nos. 4 through 7) AD-330/AD-320 Sail Switch Bracket Twin Speed Nut #6-32 x 1/2” Round Head Machine Screw #6 Star Washer #6-32 Hex Nut
88 Currant Road / Fall River, MA 02720-4781
Back Guard Assemblies
Illus. No. 1 2 3 4 5 6 7 8
Part No. 315014 150309 314404 314405 314404 314405 103500 150309
Qty. 1 2 1 1 1 1 4 22
Telephone: (508) 678-9000
43
Description Top Electric Box Cover Plate #10-16 x 1/2” Hex Head TEK Crimptite Screw AD-330/AD-320 Top Upper Guard AD-330/AD-320 Top Lower Guard AD-330/AD-320 Bottom Upper Guard AD-330/AD-320 Bottom Lower Guard Adjustable Leveling Leg #10-16 x 1/2” Hex Head TEK Crimptite Screw
Fax: (508) 678-9447
44
Optional Gas Piping and Exhaust Ducting Kits
ADG-330/ADG-320 Optional Gas Piping Kit Illus. No.
Part No.
Qty.
---
880128
1
1 2 3 4 5 6 7 8 9 10 11 12
142821 142505 142814 142600 142824 142500 142814 142600 142700 143001 142700 143001
1 1 1 1 1 1 1 1 1 1 1 1
Description ADG-330/ADG-320 Gas Piping Kit (includes illus. nos. 1 through 12) 3/4” x 36” Pipe 3/4” x 1/2” x 1/2” Tee 1/2” x 2-1/2” Nipple 1/2” Union 1/2” x 37-1/4” Pipe 1/2” x 90º Elbow 1/2” x 2-1/2” Nipple 1/2” Union 1/2” Close Nipple 1/2” Coupling 1/2” Close Nipple 1/2” Coupling ADG-330/ADG-320 Optional Exhaust Ducting Kit
*
---
882035
1
13 14 15 16 -----
143600 143519 143509 143536 150300* 117505*
1 1 1 2 12 12
AD-330/AD-320 Exhaust Ducting Kit (includes illus. nos. 13 through 16) 10” x 6” x 6” Wye Branch Duct 6” Round x 4’ Long Flexible Exhaust Duct 6” Round x 8’ Long Flexible Exhaust Duct 6” Round x 45º Elbow #10-16 x 1/2” Hex Washer TEK Screw Aluminum Duct Tape (sold by the foot)
Included with Exhaust Ducting Kit (ADC Part No. 882035).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
12-Rib 95” (J) Poly Belt Arrangement
Telephone: (508) 678-9000
45
Fax: (508) 678-9447
46
Bottom Exhaust Duct Assembly and Cabinet Hi-Limit
Illus. No.
Part No.
Qty.
1 2 3 4
143536 143545 117505* 130107 150301
2 1 5 2 4
*
Description 6” Round x 45º Elbow 6” Round x 6” Long Duct Aluminum Duct Tape (sold by the foot) Cabinet Hi-Limit 160° #8-18 x 7/16” Phillips Pan Head Screw
Tape ALL joints.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
PHASE
WIRE SIZE
TERMINAL LU G
ELECTRIC OVEN RELAY
ELECTRIC OVEN ASSEMBLY*
QTY.
KW SIZE
PART NO.
QTY.
SIZE
PART NO.
QTY.
PART NO.
PART NO. 112011
CAT. NO.
PART NO.
ELEMENTS
OVEN WIRE
BUS BAR
15
208
1ø
2
824957
6
2.5
120036
1
#4
830421
1
121012
6’
DPA 73
131376
15
240
1ø
2
843243
6
2.5
120040
1
#4
830421
1
121012
6’
DPA 63
131369
15
208
3ø
3 or 4
883802
6
2.5
120036
1
#8
830422
1
121012
2’
DPA 43
131357
15
240
3ø
3 or 4
883803
6
2.5
120040
1
#8
830422
1
121010
2’
DPA 43
131357
15
380
3ø
3 or 4
883804
6
2.5
120038
1
#8
830423
1
121010
2’
DPA 33
131352
15
416
3ø
3 or 4
883805
6
2.5
120036
1
#8
830423
1
121010
2’
DPA 33
131352
Electric Oven Component Chart
Telephone: (508) 678-9000 OVEN SERVICE SIZE VOLTAGE (KW)
* When ordering electric oven assembly complete, specify 3-wire or 4-wire when applicable.
47
Fax: (508) 678-9447
48
Step Down Transformer Usage Listing
STEP DOWN TRANSFORMER USAGE LISTING HEAT
VOLTAGE
PHASE
WIRE SERVICE
TRANSFORMER PART NUMBER
208
1ø
2
132063
240
1ø
2
132070
208
3ø
3 or 4
141403
240
3ø
3 or 4
141403
380
3ø
3 or 4
141403
460/480
3ø
3 or 4
141403
ELECTRIC
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Additional Parts Available
Part No.
Description
100405 112039 112119 112144 112530 114001 114006 120802 120903 121014 121499 121500 121503 112804 112280 404500 404502 404506 404507 404515 404516 410001 450403 450142 450426 880200 880884 881299
Bearing Puller (for fan [impellor] shaft bearing) “Black/White/Green Ground” Label Phase 5 Dual Microprocessor Controller (DMC) User’s Manual AD-330/AD-320 Installation Manual “Program Location Summary” Coin Label “CAUTION - Exhaust/Lint Screen” Label “WARNING - Fire Hazards” Label Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 5-1/2” Harness Tie 8” Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) for Measuring Gas Pressure “Lint Compartment” Label Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Beige Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Coral Blue Brush-In-Cap Bottle Touch-Up Paint Ivory Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench (for gas valve tail piece removal) ADG-320D and ADG-330 Service Procedures ADC Direct Spark Ignition (DSI) Technical Manual Johnson Controls Direct Spark Ignition (DSI) Technical Manual Electrical Terminal (assortment) Kit Basket (tumbler) Puller Assembly Loctite Adhesive Kit (for setscrews)
Telephone: (508) 678-9000
49
Fax: (508) 678-9447
ADC 450212
1 - 08/21/02-25
2 * 04/24/03-20
