Transcript
AD-75 Parts Manual 24 VAC Phase 5 1992 Thru February 1999
American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 e-mail:
[email protected] www.amdry.com 090392 031497WM/tf
ADC Part No. 450104
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ____________________________
MODEL NO.
AD-75
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s)
________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998 .................................................................................................... 2 Control Door Assembly With Trim For ALL Coin Models and Only OPL Models Mfd. prior to July 13, 1998 ...................................................................... 3 Phase 5 Coin Microprocessor Control Panel Assembly ......................................................................................................... 4 Phase 5 OPL Microprocessor Control Panel Assembly ......................................................................................................... 5 Phase 5 Coin and OPL Microprocessor Control Box Assembly ............................................................................................. 6 Coin Vault Assembly .............................................................................................................................................................. 7 Dual Timer Control Panel Assembly .................................................................................................................................. 8, 9 Dual Timer Control Box Assembly ....................................................................................................................................... 10 Front Panel Assembly .......................................................................................................................................................... 11 Main Door Switch Housing ................................................................................................................................................. 12 Main Door Assembly ........................................................................................................................................................... 13 Basket (Tumbler)/Support Assemblies ...........................................................................................................................14, 15 Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998 .................................................................................................. 16 Drop Lint Door Assembly With Trim For ALL Coin Models and Only OPL Models Mfd. prior to July 13, 1998 .................................................................... 17 Lint Trap Assembly For Gas and Electric Models Mfd. With 8” Exhaust ..................................................................................................... 18 Lint Trap Assembly For Steam Models Mfd. With 10” Exhaust .................................................................................................................... 19 Basket (Tumbler) Bearing Assembly ...............................................................................................................................20, 21 Idler Bearing Assembly ...................................................................................................................................................22, 23 Non-Revering T.E.F.C. Motor Mount Assembly .............................................................................................................24, 25 Reversing T.E.F.C. Motor Mount Assembly For Steam Models With 10” Exhaust Mfd. as of February 20, 1992 .........................................................................26, 27 Reversing T.E.F.C. Motor Mount Assembly For Gas, Electric, and Steam Models Mfd. prior to February 20, 1992 .....................................................................28, 29 Sensor Bracket Assemblies .............................................................................................................................................30, 31 Direct Spark Ignition (DSI) Upshot Burner Assembly ....................................................................................................32, 33 Electric Oven Assembly ..................................................................................................................................................34, 35 Single-Phase (1ø) Motor, Electric Relay Panel Assembly ..................................................................................................... 36 3-Phase (3ø) Motor, Electric Relay Panel Assembly ............................................................................................................. 37 Microprocessor Reversing Rear Control Box Assembly For Gas and Electric Models ONLY .............................................................................................................................. 38 Microprocessor Reversing Rear Control Box Assembly For Steam Models ONLY .............................................................................................................................................. 39 Dual Timer Reversing Rear Control Box Assembly For Gas and Electric Models ONLY .............................................................................................................................. 40 Dual Timer Reversing Rear Control Box Assembly For Steam Models ONLY .............................................................................................................................................. 41 Air Operated Steam Damper Assembly ...........................................................................................................................42, 43 Outer Top/Back Guard Assemblies For Gas and Electric Models ONLY .............................................................................................................................. 44 Back Guard Assembly For Steam Models ONLY .............................................................................................................................................. 45 Coin Acceptors Listing ........................................................................................................................................................ 46 Electric Oven Component Application Chart ....................................................................................................................... 47 Step Down Transformer Usage Listing ................................................................................................................................ 48 Additional Parts Available ................................................................................................................................................... 49
2
Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998
Illus. No. 1 2
3 4 5 6 7 8 *
Part No.
Qty.
881053 870011 881045*
1 1 1
881046
1
117604 150300 102603 102601 102502 882541
4 4 1 1 1 2
Description ADC Logo ONLY (with double adhesive tape) Logo Double Adhesive Tape Kit ONLY Control Door (includes illus. nos. 2 and 3) Stainless Steel Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Turn Latch
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Control Door Assembly With Trim
3
For ALL Coin Models and Only OPL Models Mfd. prior to July 13, 1998
Illus. No.
Part No.
Qty.
1
160015
1
160017
1
160104 160016 112350 870011 800020*
1 1 1 1 1
800144
1
180202 117603 150201 150309 102603 102601 102502
1 3 6 4 1 1 1
2 3 4
5 6 7 8 9 10 11 *
Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo ONLY Logo Double Tape Kit High Security Control Door Assembly (includes illus. nos. 4 through 7) Stainless Steel High Security Control Door Assembly (includes illus. nos. 4 through 7) Top Trim Strip (gray) with Lock Hole (38-1/4” length) Suppressor Tape/Gasket (sold by the foot) #10-32 x 1/4” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2
112526 801213
1 1
801229
1
801259 801258 150309 137213 824998 153010 150005 ---------
1 1 1 1 1 2 2 1
137056 137023 137021* 880772 824080 122800 136048
1 1 3 1 1 1 1
3 4 5 6 7 8* 9* 10
11 *
Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor (refer to Coin Acceptors Listing on page 46) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (slo blo) Fuse
For dual coin models double the quantity shown.
IMPORTANT: Check label on computer chip to verify correct part number of controller. American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535 112276 112275
1 1 1
112277
1
112278
1
801255 801256 801206
1 1 1
801207
1
137222 137231 824998 153010 150005 150413 882541
1 1 1 2 2 1 1
136048
1
2
3
4 5 6
7
Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English only)...Not Illustrated 3-Language OPL Stick-On Labels...Not Illustrated (Spanish, Italian, and Hebrew) 3-Language OPL Stick-On Labels...Not Illustrated (English, Spanish, and Hebrew) 5-Language OPL Stick-On Labels...Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” TORX Head Crimptite Screw Spring Turn Latch (2-piece)...Not Illustrated (for models mfd. prior to March 1, 1994) 1/8-Amp (slo blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller. Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Phase 5 Coin and OPL Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
141403
1
132070
1
150300 120715 150002 151000 136057 150301 136008 122641 122706 112801
2 1 2 2 * * * 1 * 1
2 3 4 5 6 7 8 9 10
*
Description Transformer - 24 VAC (for ALL 380/416/480 volt gas and steam models) (for 380/416/480 volt electric models) Transformer - 24 VAC (for 120/208/240 volt electric models) #10 x 1/2” Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1” Phillips Round Head Screw #6-32 Pal Nut 1/2-Amp (slo blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY 15-Pin Microprocessor Connector Socket ONLY Pin/Socket Extraction Tool
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Coin Vault Assembly
Illus. No.
Part No.
Qty.
1
802112
1
4
802117 160028 875061 160105* 802020
1 1 1 1 1
5 6 7 8 9
802019 125915 802018 152014 102502 102601 102603
1 1 1 4 1 1 1
2 3
*
Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Cam For 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Face Plate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Face Plate ONLY 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Support Catch
Specify key number when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
American Dryer Corporation
Dual Timer Control Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
9
Dual Timer Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
123005 122400 824015
1 1 1
4 5 6 7 8 9
800051 131917 150207 154001 152000 153010 120730
1 1 2 2 2 2 1
120713
1
150002 150110 150001 131931 151000 112050 150309
2 4 2 1 2 1 1
150415
1
882541
1
124103 124025 124030 122602 122700 122801
2 1 1 1 8 1
10 11 12 13 14 15 16
17 18 19 20 21 ---
Telephone: (508) 678-9000
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push To Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block (for models mfd. as of May 2, 1993) 18-Position Terminal Block (for models mfd. prior to May 2, 1993) #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw (for models mfd. as of February 2, 1998) #10-16 x 1/2” Phillips Round Head Crimptite Screw (for models mfd. between March 2, 1994 and February 1, 1998) Spring Turn Latch (2-piece)...Not Illustrated (for models mfd. prior to March 1, 1994) Arrow Timer Knob 60 Minute Timer - 24 VAC 15 Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool
Fax: (508) 678-9447
10
Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1 2
122603 122701 122801 315010 150300 150300 141403
1 8 1 1 2 2 1
132070
1
136008 136057 150301 150002 120715 151000
* * * 2 1 2
3 4 5 6
7 8** 9 10 11 12
Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2” Hex Washer TEK Screw #10 x 1/2” Hex Washer TEK Screw Transformer - 24 VAC (for ALL 380/416/480 volt gas and steam models) (for 380/416/480 volt electric models) Transformer - 24 VAC (for 120/208/240 volt electric models) Fuse Block/Strip ONLY 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut
* As required. ** Check fuse rating for verification.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
11
Front Panel Assembly
Illus. No. 1
2 3 4 5 6 *
Part No.
Qty.
875302*
1
875313
1
154215 170330 150300 150309 121405
2 1 1 8 1
Description Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) Stainless Steel Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 5/32” Pop Rivet Friction Door Latch #10 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
Main Door Switch Housing
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
152013 153008 137005 121028 154281 800448
2 2 1 2 2 1
7 8 9 10
153565 313218 150201 121405
2 1 2 1
American Dryer Corporation
Description #6-32 Hex Nut #6 Lock Washer Single-Pole Door Switch (SDS) Insulated Female Terminal 3/8” Standard Nylon Spacer 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head TEK Screw Rubber Grommet
88 Currant Road / Fall River, MA 02720-4781
13
Main Door Assembly
Illus. No.
Part No.
Qty.
1
881421
1
2 3 4 5 6
800448 150410 152014 102349 102212 170730 150448 170319 150431
4 4 4 1 1 1 4 4 1
7 8 9
Telephone: (508) 678-9000
Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with Four (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head)
Fax: (508) 678-9447
14
American Dryer Corporation
Basket (Tumbler)/Support Assemblies
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
1*
800708 800857 800816
1 1 1
800873
1
800819
1
800876
1
2
150413 150429
40 1
3
301308 301408 150500 100905 153004 800613 800615 152005 153005 153004 116000 401010
4 4 1 4 4 1 1 4 4 4 1 1
4 5 6 7 8 9 10 11 --*
15
Description Basket (tumbler) ONLY without Felt Collar Stainless Steel Basket (tumbler) ONLY without Felt Collar Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX Head Crimptite Screw TORX Hand Driver (for removal of TORX head screw) Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/4” Socket Button Head Screw 3/8-16 x 37” Tie Rod 3/8” Flat Washer Non-Reversing Basket (tumbler) Support ONLY Reversing Basket (tumbler) Support ONLY 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar
Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998
Illus. No.
Part No.
Qty.
1
160001 160103 800150
1 1 1
2
160003 160104 160008 160009 150425
1 1 1 1 1
3 4
157000 802104*
1 1
882106
1
150201 117604 150419 108120 150418
6 7 2 1 1
5 6 7 8 -*
Description AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY Lock Cam For AD-100 Lock and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
17
Drop Lint Door Assembly With Trim For ALL Coin Models and Only OPL Models Mfd. Prior to July 13, 1998
Illus. No.
Part No.
Qty.
1
160001 160103 800150
1 1 1
2
160003 160104 160008 160009 150425
1 1 1 1 1
3 4
157000 800237*
1 1
880229
1
150201 117604 117603 180212 150419 108120 150418
6 7 3 1 2 1 1
5 6 7 8 9 10 --*
Description AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY Lock Cam For AD-100 Lock and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) Suppressor Tape/Gasket (sold by the foot) Mid Trim/Kick Plate - Gray (8-1/4” length) #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
18
Lint Trap Assembly For Gas and Electric Models Mfd. With 8” Exhaust
Illus. No.
Part No.
Qty.
1
800420
1
800421 800422
1 1
800423 154200 304101 150300 800506 150419 108120 150418
1 7 1 2 1 2 1 1
2 3 4 5 6 7 -
American Dryer Corporation
Description Non-Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Non-Reversing Lint Trap ONLY Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Reversing Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder ONLY #10 x 1/2” Hex Washer TEK Screw Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver
88 Currant Road / Fall River, MA 02720-4781
19
Lint Trap Assembly For Steam Models Mfd. With 10” Exhaust
Illus. No.
Part No.
Qty.
1
800440
1
800433 800441
1 1
800434 154200 304101 150300 800506 150419 108120 150418
1 7 1 3 1 2 1 1
2 3 4 5 6 7 -
Telephone: (508) 678-9000
Description Non-Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Non-Reversing Lint Trap ONLY Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Reversing Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder ONLY #10 x 1/2” Hex Washer TEK Screw Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver
Fax: (508) 678-9447
20
American Dryer Corporation
Basket (Tumbler) Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
880220 153025 152050 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101
1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1
801103
1
17 18
801105 801104 880202 880779
1 1 1 1
19 20 21
152004 150610 101100
2 2 1
101118
1
22
101119
1
23
154301
2
24
100735
1
25 26
100106 824807
1 1
*
21
Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) For Models Mfd. without Rotational Sensor 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8” Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8” Pillow Block Bearing ONLY 1-3/8” Pillow Block Bearing Assembly with Magnet (for models mfd. with optional rotational sensor) 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley (for non-reversing models only) 18-3/4” Pulley (for reversing models only) 1-3/8” Taper Lock Hub (key not included) For Reversing Models ONLY 5/16-18 x 1” Allen Setscrew (for non-reversing models only) Shaft Key (for taper lock hub) For Reversing Models ONLY 5L-690 V-Belt (basket [tumbler] to idler) Rotational Sensor Assembly (for models mfd. with optional rotational sensor)
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
American Dryer Corporation
Idler Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1 2 3
100106 101140 100117
1 1 1
100114
1
4 5 6 7 8 9 10 11
154301 100705 301850 150529 880214 153007 152002 801007
2 1 1 3 2 3 3 1
12 13 14 15 16 17
150617 153005 153004 801009 152004 150509
2 2 2 1 1 1
Telephone: (508) 678-9000
23
Description 5L-690 V-Belt (idler to basket [tumbler]) 14” x 3” Compound Pulley 4L-620 V-Belt (idler to motor) For Non-Reversing Models ONLY 4L-630 V-Belt (idler to motor) For Reversing Models ONLY 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key 5/8” x 3/4” Idler Shaft 1/4-20 x 2-1/4” Carriage Bolt 5/8” Flange Bearing 1/4” Lock Washer 1/4-20 Hex Nut Idler Bearing Assembly Complete (includes illus. nos. 5 through 17) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
24
Non-Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2 3
100117 100701 101133 101130 150501 153002 153001 100073
1 1 1 1 4 4 4 1
122701 122801 137030 152004
8 1 1 4
4 5 6 7*
8 9 10
American Dryer Corporation
Description 4L-620 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 120/208/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) For Models Mfd. as of September 14, 1992 Socket Terminal Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut
88 Currant Road / Fall River, MA 02720-4781
Non-Reversing T.E.F.C. Motor Mount Assembly (continued)
Illus. No. 11 12 13 14 15
16 17 18 19 20 21 22
*
Part No.
Qty.
153002 153001 117604 154000 800919 803992*
4 4 4 4 1 1
803944*
1
803953
1
803955*
1
803958*
1
153051 882670 100714 153050 152006 120200 100075*
1 1 1 2 2 1 1
100076
1
100036*
1
25
Description 5/16” Lock Washer 5/16” Flat Washer Neoprene Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 1 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly with Plug Complete (includes illus. nos. 2 through 7 and 13 through 20) For Models Mfd. as of September 14, 1992 1 HP 120/208v 1ø 60 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) For Models Mfd. prior to September 14, 1992 3/4 HP 230v 1ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 HP 230/380/460v 3ø 60 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 HP 230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 3/4” S.A.E. Flat Washer 16” Impellor with 3/4” Bore 3/16” x 3/16” x 1-7/8” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1 HP 208/230/240/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 3/4 HP 230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 56Z Frame (50 Hz Only) 1 HP 120/230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 56Z Frame (60 Hz Only) For Models Mfd. prior to September 14, 1992
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
Reversing T.E.F.C. Motor Mount Assembly For Steam Models With 10” Exhaust Mfd. as of February 20, 1992
Illus. No. 1 2 3
Part No. Qty.
4 5
100114 100701 101130 101139 120200 181003
1 1 1 1 1 1
6 7 8
150501 153002 153001
4 4 4
American Dryer Corporation
Description 4L-630 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz Only) 5/8” x 2-3/4” Motor Pulley (50 Hz Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer
88 Currant Road / Fall River, MA 02720-4781
27
Reversing T.E.F.C. Motor Mount Assembly (continued) For Steam Models With 10” Exhaust Mfd. as of February 20, 1992
Illus. No.
Part No.
Qty.
9*
100075
1
100023
10 11 12 13 14 15 16 17 18
120200 150501 153002 153001 154000 152004 153002 153001 800920 803952**
803959**
803987**
803964**
19 20 21 22
117604 153051 100702 882670 881428
23 24
153050 152006
Description
1 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with 3/4” Shaft (56Z frame) For Models Mfd. as of March 1, 1995 1 1 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with 3/4” Shaft (56Z frame) For Models Mfd. Between February 20, 1992 and March 1, 1995 1 3/8” x 90° Connector 4 5/16-18 x 3/4” Hex Head Machine Bolt 4 5/16” Lock Washer 4 5/16” Flat Washer 8 5/16-18 Tinnerman Nut 7 5/16-18 Hex Nut 7 5/16” Lock Washer 7 5/16” Flat Washer 1 Reversing Motor Mount ONLY (56Z frame) 1 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For Models Mfd. as of March 1, 1995 1 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For Models Mfd. Between February 20, 1992 and March 1, 1995 1 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For Models Mfd. as of March 1, 1995 1 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For Models Mfd. Between February 20, 1992 and March 1, 1995 4 Neoprene Sponge Tape (sold by the foot) 1 3/4” S.A.E. Flat Washer 1 1/8” x 1/8” x 1-1/2” Key 1 16” Impellor with 3/4” Bore (for models mfd. as of March 1, 1995) 1 13” Impellor with 3/4” Bore (for models mfd. prior to March 1, 1995) *** 1/2” S.A.E. Flat Washer 2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor. ** Specify voltage when ordering. *** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
Reversing T.E.F.C. Motor Mount Assembly For Gas, Electric, and Steam Models Mfd. prior to February 20, 1992
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
29
Reversing T.E.F.C. Motor Mount Assembly For Gas, Electric, and Steam Models Mfd. prior to February 20, 1992
Illus. No.
Part No.
Qty.
1 2 3 4 5
100114 100701 101130 101139 120200 181003
1 1 1 1 1 1
6 7 8 9*
150501 153002 153001 100075
10 11 12 13 14 15 16 17 18
120200 150501 153002 153001 154000 152004 153002 153001 800920 803952**
803987**
19 20 21 22 23 24
117604 153051 100714 882670 153050 152006
Description
4L-630 V-Belt (to idler assembly) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz Only) 5/8” x 2-3/4” Motor Pulley (50 Hz Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 4 5/16-18 x 3/4” Hex Head Machine Bolt 4 5/16” Lock Washer 4 5/16” Flat Washer 1 1 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with 3/4” Shaft (56Z frame) For Models Mfd. prior to March 1, 1995 1 3/8” x 90° Connector 4 5/16-18 x 3/4” Hex Head Machine Bolt 4 5/16” Lock Washer 4 5/16” Flat Washer 8 5/16-18 Tinnerman Nut 7 5/16-18 Hex Nut 7 5/16” Lock Washer 7 5/16” Flat Washer 1 Reversing Motor Mount ONLY (56Z frame) 1 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 1 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 4 Neoprene Sponge Tape (sold by the foot) 1 3/4” S.A.E. Flat Washer 1 3/16” x 3/16” x 1-7/8” Key 1 16” Impellor with 3/4” Bore *** 1/2” S.A.E. Flat Washer 2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor. ** Specify voltage when ordering. *** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2 3 4 5 6 7 8 9 10
130103 153010 152000 121028 122701 112801 122605 154007 150005 801425
1 2 2 2 4 1 1 2 2 1
11 12 13 14 15
305007 122604 122700 150301 150005 130111
1 1 4 2 * 1
130100
1
130109
1
130100
1
130103
1
130107
1
16
American Dryer Corporation
Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Large Thermostat (for ADC models mfd. as of August 1, 1993) 150° Large Thermostat (for ADC models mfd. prior to August 1, 1993) 140° Large Thermostat (for UniDryer® models Only) 150° Large Thermostat (for ADC models mfd. as of August 1, 1993) 225° Large Automatic Reset Thermostat (for ADC models mfd. prior to August 1, 1993) 160° Large Thermostat (for UniDryer® models Only)
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies (continued)
Illus. No.
Part No.
Qty.
17
130103
1
18 19 20 21
130101 153010 152000 840065
1 * * 1
840063
1
121028 122701 122605
* * 1
122609
1
840062
1
831702
1
801418
1
801411
1
801405
1
305007 122604
1
122608
1
122700 122801 150301
* 1 2
22 23 24
25
26
27 28 *
31
Description 225° Large Automatic Reset Thermostat (for ALL UniDryer® models and ADC models mfd. as of August 1, 1993) 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper (4) ONLY (for ALL UniDryer® models and ADC models mfd. as of August 1, 1993) Sensor Jumper (3) ONLY (for ADC models mfd. prior to August 1, 1993) Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY (for ALL UniDryer® models and ADC models mfd. as of August 1, 1993) 3-Pin Socket Connector ONLY (for ADC models mfd. prior to August 1, 1993) Sensor (4) Bracket Harness Assembly (includes illus. nos. 22, 23, and 24) (for ALL UniDryer® models and ADC models mfd. as of August 1, 1993) Sensor (3) Bracket Harness Assembly (includes illus. nos. 22, 23, and 24) For ADC Models Mfd. prior to August 1, 1993 Non-Computer Sensor (4) Bracket Assembly Complete with Thermostats (includes illus. nos. 14 through 25) For ADC Models Mfd. as of August 1, 1993 Non-Computer Sensor (4) Bracket Assembly Complete with Thermostats (includes illus. nos. 14 through 25) For UniDryer® Models Non-Computer Sensor (3) Bracket Assembly Complete with Thermostats (includes illus. nos. 14, 15, 16, and 18 through 25) For ADC Models Mfd. prior to August 1, 1993 Universal Sensor Bracket ONLY 4-Pin Connector ONLY (for ALL UniDryer® models and ADC models mfd. as of August 1, 1993) 3-Pin Connector ONLY (for ADC models mfd. prior to August 1, 1993) Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
Direct Spark Ignition (DSI) Upshot Burner Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
154004 150413 802799 122200 150303 105500 319202 154002 802802 802801
1 2 1 1 2 1 1 1 1 1
10 11
142812 143000
1 1
American Dryer Corporation
Description Twin Speed Nut #10-16 x 1/2” TORX Head Crimptite Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 9) 1/2” x 3” Nipple 1/2” x 3/4” Reducing Coupling
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Upshot Burner Assembly (continued)
Illus. No.
Part No.
Qty.
12 13
881367 128927 880960 140411 142506 142707 150413 318710 143000 141153 141152 141150 150301 318708 150413 150001 130201 151000 318707 150309 880815 150299 880330 150413 874048
1 1 1 1 1 1 2 1 1 1 1 1 2 1 2 2 1 2 1 2 1 4 1 2 1
305410 804001 804002 809619**
1 1 1 1
809620**
1
809621**
1
809622**
1
874042*
1
14 15 16 17 18 19* 20 21 22 23 24 25 26 27 28 29 30 31 32 33
34
33
Description Union Shut Off Body Complete with 1/2” Tail Piece and Collar 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly 1/2” 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit 1/2” x 1/2” Street Elbow 1/2” x 1-1/2” Nipple #10-16 x 1/2” TORX Head Crimptite Screw 1-Piece Gas Valve Train Mounting Bracket 1/2” x 3/4” Reducing Coupling #H Burner Orifice (natural gas) ONLY #21 Burner Orifice (liquid propane [L.P.] gas) ONLY Upshot Burner with Shutter and Spreader #8-18 x 7/16” Phillips Pan Head TEK Screw Upshot Burner Assembly Bracket Support #10-16 x 1/2” TORX Head Crimptite Screw #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit #6-32 Pal Nut Hi-Limit Mounting Bracket ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz) #10 x 1” Hex Head TEK Screw Direct Spark Ignition (DSI) Ignitor High Voltage (HV) Wire/Connector ONLY #10-16 x 1/2” TORX Head Crimptite Screw Ignitor/Flame-Probe Assembly Kit (includes high voltage [HV] wire connector) Direct Spark Ignition (DSI) Ignitor Gap Feeler Gauge...Not Illustrated Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY Non-Heat Reclaimer Natural Gas Burner Assembly Complete Less Orifice (includes illus. nos. 1 through 18, 20 through 28, and 31 through 34) Non-Heat Reclaimer Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifice (includes illus. nos. 1 through 18, 20 through 28, and 31 through 34) Heat Reclaimer Natural Gas Burner Assembly Complete Less Orifice (includes illus. nos. 1 through 18, 20 through 28, and 31 through 34) Heat Reclaimer Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifice (includes illus. nos. 1 through 18, 20 through 28, and 31 through 34) ADG-75 Burner Liquid Propane (L.P.) Conversion Kit with Orifice
* Consult factory for elevations over 2,000 feet. ** Burner orifice is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
Electric Oven Assembly
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly
Illus. No. 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 *
Part No.
Qty.
803005 ---------* ---------* 150300 802800 802801
1 1 2 1 1
154004 150413 802799 122200 150303 105500 319202 154002 150300 803100 320611 150402 130400 150300 154001 121012 152014 ---------* ---------* 120081 120080 152008 121011* ---------* 153009 320607 150402
1 2 1 1 2 1 1 1 2 1 1 2 1 2 1 1 3 1 1 1 2
35
Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” TORX Head Crimptite Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw 290° Hi-Limit #10 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut Terminal Lug For 110-8 Wire 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw
Refer to Electric Oven Component Application Chart on page 47.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
132475 150299 824828
1 2 1
-
322809 150301
1 4
American Dryer Corporation
Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Head TEK Screw RC Network with Connectors (for microprocessor controller [computer] models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
37
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
322812 132430 137015
1 1 1
4 5 6 7 8 9 10 11 -------
150103 151001 153002 152004 120701 150008 151000 121300 322809 150301 ---------*
2 2 1 1 1 2 2 3 1 4 1
*
Description Back Electrical Box Component Plate Impellor Contactor (208/230/240v, 50/60Hz) 24 VAC RC Network (for microprocessor controller [computer] models Only) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer
Refer to Step Down Transformer Usage Listing on page 48.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
Microprocessor Reversing Rear Control Box Assembly For Gas and Electric Models ONLY
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ------*
Part No. 322812 137060 137013 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 322809 150301 ---------*
Qty. 1 1 4 1 2 2 1 1 1 2 2 1 2 2 3 1 4 1
Description Back Electrical Box Component Plate Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer
Refer to Step Down Transformer Usage Listing on page 48.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Microprocessor Reversing Rear Control Box Assembly For Steam Models ONLY
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
322812 137060 137013 882386 150103 151001 153002 152004 132430
1 1 4 1 2 2 1 1 1
132445
1
150103 151001 120701 150008 151000 121300 322809 150301 ---------*
2 2 1 2 2 3 1 4 1
10 11 12 13 14 15 ------*
Description Back Electrical Box Component Plate Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 1 HP Contactor (for models mfd. as of March 1, 1995) 3 HP Contactor (for models mfd. prior to March 1, 1995) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer
Refer to Step Down Transformer Usage Listing on page 48.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Dual Timer Reversing Rear Control Box Assembly For Gas and Electric Models ONLY
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ------*
Part No. 322812 132198 150301 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 322809 150301 ---------*
Qty. 1 1 2 1 2 2 1 1 1 2 2 1 2 2 3 1 4 1
Description Back Electrical Box Component Plate Reversing Timer (50/60 Hz) 24 VAC #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer
Refer to Step Down Transformer Usage Listing on page 48.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
41
Dual Timer Reversing Rear Control Box Assembly For Steam Models ONLY
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
322812 132198 150301 882386 150103 151001 153002 152004 132430
1 1 2 1 2 2 1 1 1
132445
1
150103 151001 120701 150008 151000 121300 322809 150301 ---------*
2 2 1 2 2 3 1 4 1
10 11 12 13 14 15 ------*
Description Back Electrical Box Component Plate Reversing Timer (50/60 Hz) 24 VAC #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 1 HP Contactor (for models mfd. as of March 1, 1995) 3 HP Contactor (for models mfd. prior to March 1, 1995) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer
Refer to Step Down Transformer Usage Listing on page 48.
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
American Dryer Corporation
Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165009 153002 152004 152002 153007 820321 803415
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
153007 152002 115995 102350 151007 152007 100497 100492 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520
43
Description
Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 4 1/4” Lock Washer 4 1/4-20 Hex Nut 108 Steam Damper Gasket (sold by the inch) 1 Steam Damper Foam (68-1/2” length) 1 7/16-20 Stainless Steel Acorn Nut 1 7/16-20 Hex Nut 1 1-1/4” Bore x 3” Stroke Piston 1 Piston Support Bracket 4 1/4-20 Hex Nut 4 1/4” Lock Washer 1 1/4” x 1/8” Connector 1 1/4” Tubing (sold by the foot) 1 1/4” x 1/8” Connector 1 1/8” Needle Valve 1 1/8” Close Nipple 1 3-Way Micro Valve - 24 VAC 2 #6-32 x 1” Phillips Round Head Machine Screw 2 #6 Star Washer 2 #6-32 Hex Nut 1 Micro Valve Support Bracket 2 1/4-20 Hex Nut 2 1/4” Lock Washer 1 1/8” N.P.T. Silencer (muffler)
Telephone: (508) 678-9000
Fax: (508) 678-9447
44
Outer Top/Back Guard Assemblies For Gas and Electric Models ONLY
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
312527 150301 314510 150301 322809 150301 314514
1 8 1 6 1 5 1
314410
1
8 9 10
150301 103500 143542
10 4 1
11 12
143543 117505 143542
1 * 1
13
880511
1
*
Description Outer Top Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw “Plain” Bottom Back Guard (for models mfd. as of July 31, 1995) “Lettered” Bottom Back Guard (for models mfd. prior to July 31, 1995) #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 3” Hose Clamp (for heat reclaimer models Only) 3” x 8’ Flexible Exhaust (for heat reclaimer models Only) Aluminum Duct Tape (sold by the foot) 3” Hose Clamp (for heat reclaimer models Only) 8” x 8” x 3” Tee Assembly with Damper (for heat reclaimer models Only)
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
45
Back Guard Assembly For Steam Models ONLY
Illus. No.
Part No.
Qty.
1 2
314511 150300 150301 322809 150301 103500
1 2 8 1 4 4
3 4 5
Telephone: (508) 678-9000
Description Bottom Back Guard #10 x 1/2” Hex Washer TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg
Fax: (508) 678-9447
46
Coin Acceptors Listing
NOTE: Coin Acceptors listed included Optical Switch (ADC Part No. 137056).
Single Coin* ADC Part No.
Nation
125100 125107 881604 125103 125121 125133
U.S. and Canada Australia Japan ----Hong Kong
Description 25¢ Optic Coin Acceptor 20¢ Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Token Optic Coin Acceptor 0.800 Token Optic Coin Acceptor $1 Hong Kong Optic Coin Acceptor
Dual Coin* 881508 881842 881542 881846
U.S. and Canada Canada United Kingdom France
10¢ / 25¢ Hanke Dual Optic Coin Acceptor 25¢ / $1 Hanke Dual Optic Coin Acceptor 1£ / 20 Pence Hanke Dual Optic Coin Acceptor 2 / 5 Franc Hanke Dual Optic Coin Acceptor
* Consult factory for coin acceptors not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Elements
Oven Wire
kW
Volt
Phase
Wire
Oven Assembly* Part No.
Qty.
Size
Part No.
40
416
3ø
3 or 4
824822
6
6.6
120027
4
36
208
3ø
3 or 4
824921
6
6
120015
36
230
3ø
3
824920
6
6
36
416
3ø
3 or 4
824921
6
36
460/480
3ø
3 or 4
824920
33
380
3ø
3 or 4
30
208
3ø
30
230
30
Terminal Lug
Oven Relay
Qty.
Part No.
#6
133200
9
121010
1
DFAG
131361
4
#2
133302
4
121012
1
GEAJ
131385
120014
4
#2
133302
9
121012
1
FEAJ
131375
6
120015
4
#4
133300
4
121012
1
DFAG
131361
6
6
120014
4
#2
133302
9
121012
1
DPA43
131357
825078
6
6.6
120015
5
#2
--------
4
121012**
1
DFAJ
131361
3 or 4
824918
6
5
120012
6
#4
133300
3
121012
1
FEAJ
131375
3ø
3
8 2 49 3 5
6
5
120013
3
#4
133300
4
121012
1
FEAJ
131375
416
3ø
3 or 4
824947
6
5
120012
4
#8
133100
6
121010
2
DPA43
131357
30
460/480
3ø
3 or 4
824953
6
5
120013
4
#8
133100
6
121010
2
BFAJ
131357
25
380
3ø
3 or 4
824940
6
5
120012
4
#8
133100
6
121010
2
BFAJ
131357
24
208
3ø
3 or 4
824916
6
4
120010
3
#4
133300
4
121012
1
DPA63
131376
24
230
3ø
3
824933
6
4
120011
3
#6
133200
3
121010
1
DFAG
131361
24
416
3ø
3 or 4
824946
6
4
120010
4
#8
133100
6
121010
2
BFAJ
131357
24
460/480
3ø
3 or 4
824952
6
4
120011
4
# 10
133000
6
121010
2
BFAJ
131357
20
208
1ø
2
824904
5
4
120010
2
#4
133300
2
121010
2
GEAJ
131385
20
230
1ø
2
824926
5
4
120011
2
#4
133300
3
121010
2
FEAJ
131375
20
380
3ø
3 or 4
824939
6
4
120010
4
# 10
133000
6
121010
2
BFAJ
131357
Qty. Size
Cat. No.
Part No.
*
Oven assembly complete does not include oven relay. This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controller (computer) or non-microprocessor controls. ** Wire is included with the terminal lugs.
47
Fax: (508) 678-9447
Part No.
B u s B ar P / N 121011
Electric Oven Component Application Chart
Telephone: (508) 678-9000
ADE-75
48
Step Down Transformer Usage Listing
STEP DOW N TRANSFORM ER USAGE L ISTING Voltage
Wire Service
Transformer Part No.
380
3
132059
380
4
132059
G AS
416
3
132062
ELECTRIC STEAM
416
4
132062
460/480
3
132053
460/480
4
132053
575
3
132050
Heat
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Additional Parts Available
Part No. 112039 112280 112534 114006 120100 120300 120400 120500 120600 120800 120802 120902 120903 121014 121499 121500 122804 404500 404502 404506 404507 410001 882458
49
Description “Black/White/Green Ground” Label “Clean Lint Screen” Label “Phase 5 OPL Program Location Summary” Label “WARNING - Fire Hazards” Label 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX) Retainer Clip 3/8” Greenfield (BX) 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 1/4” Insulated (female) Terminal 5-1/2” Harness Tie 8” Harness Tie Manometer (hydro gauge) For Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Beige Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench (for removal of shutoff valve tail piece) Basket (tumbler) Bearing Puller
Telephone: (508) 678-9000
Fax: (508) 678-9447
ADC 450104
1- 09/03/92-250 4- 03/18/93-250 7* 03/21/94-100 10- 11/29/94-200 13- 09/28/95-200 16- 10/30/96-250 19* 12/11/97-100 22* 12/07/98-50 25- 11/15/99-50 28* 09/26/00-75
2* 09/25/92-250 5* 09/25/93-250 8* 04/08/94-250 11* 03/02/95-200 14* 12/04/95-200 17* 03/24/97-250 20- 02/24/98-100 23* 03/26/99-50 26* 03/13/00-50 29* 05/04/01-25
3* 02/08/93-100 6- 01/05/94-100 9* 08/23/94-100 12* 07/10/95-200 15* 03/25/96-250 18* 09/18/97-100 21* 09/28/98-50 24- 06/18/99-50 27- 05/25/00-75
