Preview only show first 10 pages with watermark. For full document please download

Ad-78 Ii 2001-2002 (p/n: 450576)

   EMBED


Share

Transcript

AD-78 II Parts Manual 2001-2002 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com 122601RSTOOLIN/rmoles ADC Part No. 450576 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. AD-78 II __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents OPL Control Door Assembly .................................................................................................................. 2 Control Door (Coin Models) .................................................................................................................. 3 Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 4 Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5 Coin Vault Assembly ............................................................................................................................... 6 Front Panel Assembly ............................................................................................................................. 7 Main Door Assembly (Round Door) ....................................................................................................... 8 Main Door Switch Assembly For Round Main Door ............................................................................... 9 Sensor Bracket Assembly ..................................................................................................................... 10 Lint Trap Assembly ............................................................................................................................... 11 Drop Lint Door Assembly ..................................................................................................................... 12 Basket (Tumbler) Support Assembly ..................................................................................................... 13 Idler Bearing Assembly ......................................................................................................................... 14 Basket (Tumbler) Bearing Assembly ...................................................................................................... 15 Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 16 3-Phase (3ø) Motor, Non-Reversing Electric Relay Panel Assembly ...................................................... 17 3-Phase (3ø) Motor, Reversing Electric Relay Panel Assembly ........................................................ 18, 19 Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 20, 21 Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 22, 23 Hot Surface Ignition (HSI) Burner Assembly CE Export ................................................................................................................................... 24, 25 Direct Spark Ignition (DSI) Burner Assembley For Models Mfd. as of April 11, 2000 ......................................................................................... 26, 27 Sail Switch Assembly ............................................................................................................................ 28 Back Guard Assemblies ........................................................................................................................ 29 Microprocessor Coin Acceptors Listing ................................................................................................ 30 Additional Parts Available ..................................................................................................................... 31 2 OPL Control Door Assembly Illus. No. Part No. Qty. 1 883244* 1 2 3 4 5 6 150134 150317 117605 117604 881053 2 2 2 2 1 * Description Control Door Assembly (includes illus. nos. 1, 4, and 5) #10-32 x 1/2” TORX Screw #10-16 x 3/4” TORX Screw 1/4” x 3/8” Neoprene Sponge Tape 1/8” x 3/8” Neoprene Sponge Tape ADC Logo with Adhesive Tape Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Control Door (Coin Models) Illus. No. Part No. Qty. 1 2 3 4 5 6 7 883243** 117605 150317 160015 160052 160104 881053 1 2 2 2 1 * 1 3 Description Control Door without Locks 1/4” x 3/8” Neoprene Sponge Tape #10-16 x 3/4” TORX Screw MK-100 Lock ONLY 1” Cam MK-100 Key ONLY ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 Part No. Qty. 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150413 136048 1 1 1 2 2 1 1 Description OPL English Keyboard (touch pad) Label Assembly OPL Stick-On Labels (English Only)...Not Illustrated 3-Language OPL Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated 3-Language OPL Stick-On Labels (English, Spanish, and Hebrew)...Not Illustrated 5-Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” TORX Head Crimptite Screw 1/8-Amp (slo blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. 1 2 Part No. Qty. 112526 883254 1 1 5 6 7 883253 150309 137213 824998 153010 150005 -------- 1 1 1 1 2 2 1 8 9 152102 136048 4 1 3 4 Description Coin Keyboard (touch pad) Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 30) Hex Nut 1/8-Amp (slo blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number of controller. Telephone: (508) 678-9000 Fax: (508) 678-9447 6 Coin Vault Assembly Illus. No. Part No. Qty. 1* 2** 3** 4 880118 160036 160136 880117* 1 1 1 1 5 152014 4 Description Coin Box Assembly ONLY Less Lock ACE® Lock Assembly with Key ACE® Key ONLY Coin Vault Assembly ONLY Less Lock (includes illus. nos. 1, 4, and 5) 1/4-20 Free Spin Wash Nut * Specify color when ordering. ** Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 7 Front Panel Assembly Illus. No. Part No. Qty. 1 883246* 1 883245 1 4 5 150313 150318 116147 116320 116321 122002 881987 11 ** 2 1 1 1 1 6 154215 2 2 3 Description Right Hand Front Panel Assembly (for OPL models) (includes illus. nos. 1, 3, 5, and 6) Right Hand Front Panel Assembly (for coin models) (includes illus. nos. 1, 3, 5, and 6) #10-16 x 1/2” TORX Plus BTN Type 1 25IP Stick-Fit TORX Plus Bit 13 x 18-1/2” Rear Lower Wall Insulation Top Front Panel Insulation Bottom Front Panel Insulation Lint Drawer Switch Friction Door Latch Kit (includes illus. nos. 5 and 6) 5/32” Pop Rivet * Specify color when ordering. ** As needed. Telephone: (508) 678-9000 Fax: (508) 678-9447 Main Door Assembly (Round Door) 8 Illus. No. -1 2 3 4 5 6 7 8 9 10 11 Part No. 883249 883252 151010 150120 152014 102214 102357 151013 150683 102361 883251 883250 Qty. 1 1 1 1 6 1 1 4 6 1 1 1 American Dryer Corporation Description Black Main Door Assembly Complete Large Cold Rolled Steel (CRS) Black Main Door Handle #10-32 Black Hex Acorn Lock Nut #10-32 Door Latch Screw 1/4-20 Free Spin Wash Nut 30” Door Glass Large Steel Door Gasket #10-32 Black Acorn Nut 1/4-20 x 5/8” Carriage Bolt Black Gasket Tape Large Black Main Door Hinge Large 37-1/4” Black Door Ring ONLY 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Assembly For Round Main Door Illus. No. Part No. Qty. 1 2 3 4 5 6 150006 152013 153010 137005 150443 882866 881153 2 2 2 1 4 1 1 7 8 150301 881151 2 1 9 881152 1 10 153031 1 Telephone: (508) 678-9000 9 Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch (SDS) 1/4-20 x 3/4” Stainless Steel Cap Screw Black Main Door Switch Housing ONLY Black Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw Black Bottom Hinge Block (includes illus. nos. 5 and 8) Black Top Hinge Block (includes illus. nos. 5 and 9) Nylon Washer Fax: (508) 678-9447 10 Sensor Bracket Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 130103 153010 152000 154007 150005 881912 1 2 2 2 2 1 7 880251 1 8 9 10 11 12 122605 122701 121028 150301 122604 122700 122801 1 4 2 2 1 4 1 American Dryer Corporation Description 225º F Large Automatic Thermostat ONLY #6 Star Washer #6-32 Hex Nut 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Temperature Sensor Bracket Complete (includes illus. nos. 1 through 7) 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 7 through 9) 4 Pin Socket Connector Socket Terminal ONLY Insulated Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 4 Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool (for removal of illus. nos. 8 and 12) 88 Currant Road / Fall River, MA 02720-4781 11 Lint Trap Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 Part No. Qty. 881904 1 801767 154200 304100 150300 800500 150419 108120 150418 150425 122116 323724 1 7 1 3 2 2 1 1 2 1 1 Telephone: (508) 678-9000 Description Lint Coupe Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Coupe ONLY 5/32” Pop Rivet Lint Screen Hold Down #10-16 x 1/2” Hex Washer TEK Screw Lint Screen #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door Tamperproof Screw Hand Driver #12-24 x 3/8” Phillips Round Head Screw Lint Drawer Switch ONLY Lint Drawer Switch Bracket Fax: (508) 678-9447 12 Drop Lint Door Assembly Illus. No. 1 2 3 Part No. 883248 883247 117604 170226 160001 160103 Qty. 1 1 5 1 1 1 American Dryer Corporation Description Drop Lint Door (for OPL models) Drop Lint Door (for coin models) 1/8” x 3/8” Neoprene Sponge Tape Slide Latch (for OPL models) Lint Door AD-100 Lock (for coin models) Key ONLY for AD-100 Lock 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler) Support Assembly Illus. No. Qty. 1 801751 801773 1 1 2 3 4 5 801774 150500 100912 116006 170730 153011 153026 152011 301701 314701 150413 1 1 8 1 1 8 8 8 * 4 32 6 7 8 9 10 11 * Part No. 13 Description Basket (tumbler) ONLY without Felt Collar Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 11) Basket (tumbler) Support ONLY 5/16-18 x 3/4” Socket Button Head Screw 1/2-13 x 25-3/8” Tie Rod Felt Collar Felt Collar Adhesive (10.3 oz.) 1/2” Flat Washer 1/2” Lock Washer 1/2-13 Hex Nut Basket (tumbler) Shims Basket (tumbler) Ribs #10-16 x 1/2” TORX Crimptite Screws As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 14 Idler Bearing Assembly Illus. No. 1 2 3 Part No. Qty. 100185 101140 100178 1 1 1 100112 1 4 5 6 154301 100705 882576 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 American Dryer Corporation Description 5L-780 V-Belt 14” x 3” Compound Pulley 4L-570 V-Belt (idler to motor) (for non-reversing models Only) 4L-610 V-Belt (idler to motor) (for reversing models Only) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler) Bearing Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. Qty. 100244 153025 152050 801775 1 4 4 1 801761 100245 150633 153011 153011 153026 152011 154322 152004 150621 153002 153001 150621 314746 824807 150413 101219 882111 101220 100719 100185 152004 150610 102102 401010 1 1 2 2 2 2 2 2 2 2 4 6 4 1 1 2 1 1 1 1 1 2 2 1 1 Telephone: (508) 678-9000 15 Description 1-15/16” Flange Bearing Lock Washer Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 13) Pillow Block Bearing Housing ONLY 1-15/16” Pillow Block Bearing 1/2-13 x 2-1/4” Hex Head Bolt 9/16” Flat Washer 9/16” Flat Washer 1/2” Lock Washer 1/2-13 Hex Nut 3/8-24 x 7/16 Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 3/4” Hex Bolt Rotational Sensor Bracket (option) Rotational Sensor Assembly (option) #10-16 x 1/2” Phillips Hex Head TEK Crimptite 18” Pulley 18” Pulley with Rotational Sensor Magnet (option) 1-15/16” Taper Lock Bushing 1/2” x 1/2” x 1-3/8” Key 5L-780 V-Belt 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew Rotational Sensor Magnet (option) Adhesive for Magnet Fax: (508) 678-9447 16 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 * Part No. 137015 151000 150300 150008 120716 306304 132083 881763 136008 136049 136057 150301 150297 152004 121010 153002 132445 121300 Qty. 1 2 2 2 1 1 1 1 * 1 2 * 1 1 1 1 1 3 Description RC Network #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Round Head Machine Screw 2-Position Terminal Block Electric Relay Panel Mounting Plate ONLY Step Down Transformer (for 120/240 volt 1Ø Only) Termination Kit Fuse Holder ONLY 3/4-Amp (slo blo) Fuse (for 120 volt models Only) 1/2-Amp (slo blo) Fuse (for 208/240 volt Only) #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Green Hex Washer TEK Screw 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor - 24 VAC Open/Closed Bushing As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 3-Phase (3ø) Motor, Non-Reversing Electric Relay Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part No. 150300 132083 881763 150301 136008 136057 150297 121010 153002 152004 137015 132447 322812 150008 120701 151000 121300 Qty. 2 1 2 2 2 1 1 1 1 1 1 1 2 1 2 3 Telephone: (508) 678-9000 17 Description #10-16 x 1/2” Hex Washer TEK Screw Step Down Transformer (for 208/240 volts Only) Termination Kit #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Holder ONLY 1/2-Amp (slo blo) Fuse #10 x 1/2” Green Hex Washer TEK Screw L-70 Ground Lug 5/16” Lock Washer 5/16-18 Hex Nut RC Network 3-Pole Contactor - 24 VAC Electric Relay Panel Mounting Plate ONLY #6-32 x 1-1/4” Phillips Round Head Machine Screw 4-Position Terminal Block #6-32 Pal Nut Open/Closed Bushing Fax: (508) 678-9447 18 3-Phase (3ø) Motor, Reversing Electric Relay Panel Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 3-Phase (3ø) Motor, Reversing Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 150300 132083 2 1 3 4 5 881763 137060 137013 132448 1 1 4 1 6 7 150301 136008 2 2 8 136057 2 9 10 11 12 13 14 15 16 17 18 19 150297 121010 153002 152004 132447 150008 120701 322812 15100 121300 135501 1 1 1 1 1 2 1 1 2 3 1 20 120768 2 21 150300 2 Telephone: (508) 678-9000 19 Description #10-16 x 1/2” Hex Washer TEK Screw Step Down Transformer (for 208/230 volts Only) Termination Kit Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor (208/230/240/380/460 volt) 24 VAC #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Holder ONLY (for 208-230/240 volt models Only) 1/2-Amp (slo blo) Fuse (for 208-230/240 volt models Only) #10 x 1/2” Green Hex Washer TEK Screw L-70 Ground Lug 5/16” Lock Washer 5/16-18 Hex Nut 3-Pole Contactor - 24 VAC #6-32 x 1/4” Phillips Round Head Machine Screw 4-Position Terminal Block Electric Relay Panel Mounting Plate ONLY #6-32 Pal Nut Open/Closed Bushing 1-Amp Double-Pole Circuit Breaker (for 460/480 volt models Only) Din Mounting Rail (sold by the inch) (for 460/480 volt models Only) #10-16 x 1/2” Hex Washer TEK Screw (for 460/480 volt models Only) Fax: (508) 678-9447 20 American Dryer Corporation Non-Reversing T.E.F.C. Motor Mount Assembly 88 Currant Road / Fall River, MA 02720-4781 Non-Reversing T.E.F.C. Motor Mount Assembly Illus. No. Part No. Qty. 1 2 3 100178 100701 101133 101130 150501 153002 153001 100073* 1 1 1 1 4 4 4 1 181050 122701 122801 137030 814764 152004 153002 153001 117600 154000 800919 803992* 1 8 1 1 1 4 4 4 4 4 1 1 801824 803955* 1 1 153051 882670 100714 153050 152006 120200 814772 100075 1 1 1 2 2 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22* * 21 Description 4L-570 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 120/208/230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) 1 HP 200/240v 1Ø 50 Hz Motor Socket Terminal Pin/Socket Extraction Tool 8-Pin Housing Connector 120 Volt - 1Ø Motor Harness 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 1 HP 120/230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly with Plug Complete (includes illus. nos. 2 through 7 and 13 through 20) 1 HP 200/240v 1Ø 50 Hz Motor Mount Assembly with Plug Complete 1 HP 230/380/460v 3Ø 60 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 3/4” S.A.E. Flat Washer 16” Fan with 3/4” Bore 3/16” x 3/16” x 1-7/8” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90º Connector 3-Phase Motor Harness 1 HP 208/230/240/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 22 American Dryer Corporation Reversing T.E.F.C. Motor Mount Assembly 88 Currant Road / Fall River, MA 02720-4781 23 Reversing T.E.F.C. Motor Mount Assembly Illus. No. 1 2 3 Part No. Qty. 5* 100112 100701 101133 101130 120200 814780 181003 1 1 1 1 1 1 1 6 7 8 9* 150501 153002 153001 100075 4 4 4 1 10 120200 814779 150501 153002 153001 154000 152004 153002 153001 800912 804029* 1 1 4 4 4 8 7 4 4 1 1 804030* 1 117600 153050 100702 882670 153050 152006 4 1 1 1 ** 2 4 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Description 4L-630 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 3/8” x 90º Connector 3-Phase Drive Motor Harness 1/2 HP 208/230/380/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 220/230/380/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with 3/4” Shaft (56Z frame) 3/8” x 90º Connector 3-Phase Blower (fan/impellor) Motor Harness 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman Nut 5/16” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (for 60 Hz models Only) (includes illus. nos. 2 through 14 and 18 through 24) Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (for 50 Hz models Only) (includes illus. nos. 2 through 14 and 18 through 24) Noise Suppressor Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 16” Fan with 3/4” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut * Specify voltage when ordering. ** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 24 Hot Surface Ignition (HSI) Burner Assembly CE Export American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 25 Hot Surface Ignition (HSI) Burner Assembly CE Export Illus. No. Part No. Qty. 1 882022* 1 882023* 1 15 16 17 18 19 20 21 22 802237 881655** 353260 150413 810029 881797 141105 150103 153000 151001 140828 140810 141232 318700 150300 128933 883255 881367 142809 323737 319704 151000 150001 130401 --------- 1 1 1 5 1 1 3 3 3 3 3 3 1 2 2 1 1 1 1 1 1 2 2 1 1 23 24 25 26 27 28 29 30 31 143000 150413 150413 151001 150413 128921 150301 881597 150413 1 2 2 2 3 1 1 1 1 2 3 4 5 6 7 8 9 10** 11 12 13 14 Description Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For Models Mfd. with Natural Gas ONLY Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For Models Mfd. with Liquid Propane (L.P.) Gas ONLY Burner Box ONLY Burner Liquid Propane (L.P.) Conversion Kit Burner Box Front ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Module Mounting Bracket Hot Surface Ignition (HSI) Module II Large Burner Tube #8-32 x 1/2” Phillips Round Head Machine Screw #8 Steel Burr #8-32 Pal Nut #20 Burner Orifice (natural gas) ONLY #42 Burner Orifice (liquid propane [L.P.] gas) ONLY 3-Port Manifold Pipe Bracket #10-16 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC CE Redundant (natural gas) Gas Valve 1/2” 24 VAC CE (liquid propane [L.P.] gas) Gas Valve Assembly 1/2” Union Shut Off with Tail Piece 1/2” x 29-1/8” Nipple Pipe Bracket Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º F Hi-Limit ONLY Sail Switch (refer to Sail Switch Assembly on page 28) 3/4” to 1/2” Reducing Coupling #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw #8-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Flame Sensor #8-18 x 7/16” Phillips Pan Head TEK Screw Hot Surface Ignitor (2-1/2” length) - 24 VAC #10-16 x 1/2” Hex Head TEK Crimptite Screw * Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 26 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 11, 2000 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 27 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 11, 2000 Illus. No. 1 2* Qty. 8 9 10 11 12 13 14 15 16 17 18 19 20 141105 140856 140810 141232 318700 150108 151001 128927 880960 809309 150300 142707 142506 142600 142804 128935 152013 150301 801708 143000 154004 802799 3 3 3 1 3 3 3 1 1 1 8 1 1 1 1 1 2 2 1 1 1 1 21 22 23 24 25 26 27 28 29 30 31 32 122200 150303 105500 319202 154002 319704 150001 151000 130201 150309 314762 801704 1 2 1 1 1 1 2 2 1 11 1 1 801705 1 801703 881655 1 1* 3 4 5 6 7 33 * Part No. Description Large Gas “T” Burner #23 Burner Orifice (natural gas) ONLY #42 Burner Orifice (liquid propane [L.P.] gas) ONLY 1/2” Manifold (3-port) Pipe Bracket (bent) #8-32 x 1/2” Pan Head Machine Screw #8-32 Pal Nut 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC (liquid propane [L.P.] gas) Gas Valve Assembly Ignitor Probe Assembly #10 x 1/2” Hex Washer TEK Screw 1” x 1-1/2” Nipple 1/2” x 1/2” Street Elbow 1/2” Black Union 1/2” x 24” Pipe Direct Spark Ignition (DSI) Module with Three (3) Tries #6-32 Hex Nut #8-18 x 7/16 Phillips Pan Head TEK Screw Direct Spark Ignition (DSI) Module Mounting Plate Assembly 1/2” x 3/4” Reducing Coupling Twin Speed Nut Sail Switch Top and Switch Bracket (Refer to Sail Switch Assembly on page 28) Sail Switch #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Hi-Limit Mounting Bracket #6-32 x 1/2” Phillips Round Head Machine Screw #6-32 Pal Nut 330º Hi-Limit Manual Reset #10-16 x 1/2” Hex Head TEK Crimptite Screw Liquid Propane (L.P.) Cover Plate (for liquid propane [L.P.] dryer Only) Natural Gas Burner Assembly Complete (includes illus. nos. 1 through 13 and 18 through 30) Liquid Propane (L.P.) Gas Burner Assembly Complete (includes illus. nos. 1 through 13 and 18 through 31) Burner Box ONLY Liquid Propane (L.P.) Conversion Kit...Not Illustrated Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Sail Switch Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 319203 319202 319201 319200 154004 154002 150300 150303 122200 881706 1 1 1 1 1 1 4 2 1 1 10 105500 1 American Dryer Corporation Description Sail Switch Mounting Bracket Sail Switch Damper (flat) Sail Switch Box Cover Sail Switch Box Twin Speed Nut 1/8” Push On Fastener #10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 10) Sail Switch Actuator Rod 88 Currant Road / Fall River, MA 02720-4781 Back Guard Assemblies Illus. No. 1 2 3 4 5 6 7 8 9 10 Part No. 314501 150301 322809 150301 103500 150301 150301 314738 314737 882099 Qty. 1 12 1 4 4 7 12 1 1 1 Telephone: (508) 678-9000 29 Description Bottom Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Rear Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard Outer Top 8” to 10” Increaser Fax: (508) 678-9447 30 Microprocessor Coin Acceptors Listing Single Coin* ADC Part No. Nation Description 883240 883239 United States, Canada, and Japan Euro and UK Hanke Programmable Coin Acceptor Hanke Programmable Coin Acceptor *Consult factory for coin acceptors not listed. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Additional Parts Available Part No. Description 112039 112280 112041 112534 114006 120800 120802 120902 120903 121499 121500 122804 404502 880884 “Black/White/Green Ground” Label “Lint Compartment” Label “CAUTION - Exhausted” Label “Phase 5 OPL Program Location Summary” Label “WARNING - Fire Hazards” Label 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 5-1/2” Harness Tie 8” Harness Tie Manometer (hydro gauge) for Measuring Gas Pressure White Brush-In-Cap Bottle Touch-Up Paint Basket (tumbler) Bearing Puller Telephone: (508) 678-9000 31 Fax: (508) 678-9447 ADC 450576 1 - 01/28/02-25