Transcript
45G, 55G, 65G ROTATORS
Add rotating capability to your forklift. For load inverting and dumping versatility.
APPLICATIONS
OPTIONS
G-Series Rotators give your driver the ability to quickly dump or invert a load, and then immediately return the forks to the pick-up position in one continuous motion. Cascade rotators are widely used in food processing, automotive manufacturing, chemical processing, recycling operations, smelting and casting operations, and general manufacturing—anywhere it is necessary to dump bins or tote boxes.
■
180˚ Rotation Stop Group—Used when stopping rotation at precisely 180˚ is desirable.
■
Special Fork Sizes and Configurations.
■
Quick-Change Lower Mounting Hooks—Allow the rotator to be removed or installed in a matter of minutes without tools. (Quick-change hydraulic couplers available separately)
■
Hydraulic Bin Retainer—Custom designed to clamp on top of bin to hold bin in place while rotating. Typically used when bin does not have fork pockets.
FEATURES ■
Rugged Construction—Cascade’s gear drive box and ring gear design are proven to provide superior durability.
■
Mechanical Bin Retainer—designed to retain lightweight bins.
■
Visibility—Large visibility window gives the driver an excellent view of the fork tips. Center seal locks out contamination.
■
Side Stabilizers—to help retain the load during rotation.
■
Rotational Torque—Good torque specifications ensure smooth, positive rotation of the load.
■
Fork Bar Width—Many fork bar widths are available to suit a wide variety of applications.
■
Forks—Rotators may be ordered with forks or with fork bars only.
■
Dual Class II, III Mounting Holes on 55G—for easy conversion of mounting hooks when changing truck sizes.
45G ROTATORS
Class II Fork Bar C
30.5" CL rotation 15.0"
21" 16.3"
VCG
18.5"
1.5"
HCG
0° 0° 0° 0° 0° 0° 0° 0° 0° 0°
32" 32" 32" 32" 32" 32" 32" 32" 32" 32"
lbs kg
545 557 702 714 723 735 743 755 765 777
247 253 318 324 328 333 337 342 347 352
ET
HCG
VCG
C
6.1" 6.1" 7.6" 7.6" 7.6" 7.6" 7.6" 7.6" 7.6" 7.6"
3.0" 3.2" 5.2" 5.2" 6.0" 6.0" 6.9" 6.9" 7.9" 7.9"
12.3" 12.2" 10.3" 10.2" 9.9" 9.9" 9.6" 9.5" 9.3" 9.3"
33" 38" 33" 38" 33" 38" 33" 38" 33" 38"
➀ See Capacity Chart for capacities with various fork sizes.
HYDRAULIC FLOW & PRESSURE
INSTALLATION KIT
Minimum Flow 5 GPM
Catalog Order No. 659245
HYDRAULIC FUNCTIONS Hydraulic Functions 1
Truck Aux. Valves Required 1
Recommended Flow 10 GPM
Maximum Flow 15 GPM
Overall Width
II II II II II II II II II II
Vertical Ctr. of Gravity
45G-RRB-10A 45G-RRB-20A 45G-RRB-11A 45G-RRB-21A 45G-RRB-12A 45G-RRB-22A 45G-RRB-13A 45G-RRB-23A 45G-RRB-14A 45G-RRB-24A
Horizontal Ctr. of Gravity
32" 37" 32" 37" 32" 37" 32" 37" 32" 37"
Effective Thickness
B
w/o Forks w/o Forks 30" 30" 36" 36" 42" 42" 48" 48"
Min. Truck Carriage Width
A
➀ ➀ 2,045 2,045 2,045 2,045 2,045 2,045 2,045 2,045
Mtg. Angle
kg
Mtg. Class
lbs
➀ ➀ 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500
Catalog Order No.
Fork Bar Width (Fork Spread)
Fork Length
360˚ Rotation Capacity @ 24" (600 mm) Load Center
4" B
A
ET
Weight
3.0" 0.5"
Maximum Pressure 2,300 PSI/160 bar
ROTATOR SPECIFICATIONS Model 45G
Rotator Speed 7.0 RPM @ 15 GPM
Rotator Torque 63,000 Inch-Lbs. @ 2,300 PSI/160 bar
X Optional motors providing increased torque are available. Reduced rotation speed will result.
ROTATOR CAPACITY CHART Model 45G 55G 65G
Fork Class II II III
4" x 1.25" 3,150 lbs. 3,150 lbs. -
100 x 35 mm 1,430 kg 1,430 kg -
Fork Size (W x T) 4" x 1.5" 100 x 40 mm 4,500 lbs. 2,040 kg 4,700 lbs. 2,130 kg -
5" x 1.5" 4,500 lbs. 5,000 lbs. 5,000 lbs.
122 x 40 mm 2,050 kg 2,270 kg 2,270 kg
5" x 1.75" 122 x 45 mm 5,500 lbs. 2,500 kg 6,500 lbs. 3,000 kg
55G ROTATORS
Class II Fork Bar C
30.5" CL rotation
15" Class II 18.7" Class III
21"
18.5" Class II 22.4" Class III
VCG
16.3" 1.5"
3.0"
5"
HCG ET
0.5"
A
B
A
B
➀ ➀ ➀ ➀ ➀ ➀ 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270 2,270
w/o Forks w/o Forks w/o Forks w/o Forks w/o Forks w/o Forks 36" 36" 36" 36" 36" 36" 42" 42" 42" 42" 42" 42" 48" 48" 48" 48" 48" 48" 54" 54" 54" 54" 54" 54"
37" 37" 42" 42" 45" 45" 37" 37" 42" 42" 45" 45" 37" 37" 42" 42" 45" 45" 37" 37" 42" 42" 45" 45" 37" 37" 42" 42" 45" 45"
➀ See Capacity Chart on opposite page for capacities with various fork sizes.
INSTALLATION KIT Catalog Order No. 659245
HYDRAULIC FUNCTIONS Hydraulic Functions 1
Truck Aux. Valves Required 1
32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32"
Overall Width
Vertical Ctr. of Gravity
Horizontal Ctr. of Gravity
0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0°
Effective Thickness
II III II III II III II III II III II III II III II III II III II III II III II III II III II III II III
Weight
55G-RRB-10A 55G-RRB-10B 55G-RRB-20A 55G-RRB-20B 55G-RRB-30A 55G-RRB-30B 55G-RRB-12A 55G-RRB-12B 55G-RRB-22A 55G-RRB-22B 55G-RRB-32A 55G-RRB-32B 55G-RRB-13A 55G-RRB-13B 55G-RRB-23A 55G-RRB-23B 55G-RRB-33A 55G-RRB-33B 55G-RRB-14A 55G-RRB-14B 55G-RRB-24A 55G-RRB-24B 55G-RRB-34A 55G-RRB-34B 55G-RRB-15A 55G-RRB-15B 55G-RRB-25A 55G-RRB-25B 55G-RRB-35A 55G-RRB-35B
Min. Truck Carriage Width
Mtg. Angle
kg
➀ ➀ ➀ ➀ ➀ ➀ 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000
Mtg. Class
lbs
Catalog Order No.
Fork Bar Width (Fork Spread)
Capacity @ 24" (600 mm) Load Center
Fork Length
360˚ Rotation
lbs
kg
ET
HCG
VCG
C
572 595 584 607 624 648 788 811 800 823 841 865 814 837 826 849 867 891 839 863 851 875 893 916 865 889 877 901 919 942
259 270 265 275 283 294 357 368 363 373 381 392 369 380 375 385 393 404 381 391 386 397 405 415 392 403 398 409 417 427
6.1" 7.3" 6.1" 7.3" 6.3" 7.5" 7.6" 8.8" 7.6" 8.8" 7.8" 9.0" 7.6" 8.8" 7.6" 8.8" 7.8" 9.0" 7.6" 8.8" 7.6" 8.8" 7.8" 9.0" 7.6" 8.8" 7.6" 8.8" 7.8" 9.0"
3.1" 4.2" 3.2" 4.2" 3.3" 4.4" 6.4" 7.3" 6.3" 7.3" 6.3" 7.3" 7.3" 8.3" 7.3" 8.3" 7.3" 8.3" 8.4" 9.4" 8.4" 9.3" 8.3" 9.3" 9.7" 10.6" 9.6" 10.5" 9.5" 10.4"
12.1" 12.1" 12.0" 12.0" 12.0" 11.9" 9.6" 9.6" 9.5" 9.6" 9.6" 9.6" 9.2" 9.3" 9.2" 9.2" 9.3" 9.3" 8.9" 8.9" 8.8" 8.9" 8.9" 9.0" 8.5" 8.6" 8.5" 8.6" 8.6" 8.7"
38" 38" 43" 43" 46" 46" 38" 38" 43" 43" 46" 46" 38" 38" 43" 43" 46" 46" 38" 38" 43" 43" 46" 46" 38" 38" 43" 43" 46" 46"
HYDRAULIC FLOW & PRESSURE Minimum Flow 5 GPM
Recommended Flow 10 GPM
Maximum Flow 15 GPM
Maximum Pressure 2,300 PSI/159 bar
ROTATOR SPECIFICATIONS Model 55G
Rotator Speed Rotator Torque 7.0 RPM @ 15 GPM 63,000 Inch-Lbs. @ 2,300 PSI
X Optional motors providing increased torque are available. Reduced speed will result.
65G ROTATORS
Class III Fork Bar C
30.7"
CL rotation
26.0" 18.7" VCG
16.3"
22.6"
1.75"
3.0" 0.8"
360˚ Rotation
A
B
A
B
➀ ➀ 3,000 3,000 3,000 3,000 3,000 3,000
w/o Forks w/o Forks 42" 42" 48" 48" 54" 54"
42" 48" 42" 48" 42" 48" 42" 48"
➀ See Capacity Chart on 45G page for capacities with various fork sizes.
Overall Width
Vertical Ctr. of Gravity
ET
HCG
VCG
C
7.9" 7.9" 9.7" 9.7" 9.7" 9.7" 9.7" 9.7"
4.8" 4.9" 8.7" 8.6" 9.7" 9.6" 10.8" 10.7"
12.0" 12.0" 9.7" 9.7" 9.3" 9.3" 9.0" 9.0"
43" 49" 43" 49" 43" 49" 43" 49"
Truck Aux. Valves Required 1
ROTATOR SPECIFICATIONS
HYDRAULIC FLOW & PRESSURE Maximum Flow 15 GPM
kg
328 339 462 473 476 487 488 499
Hydraulic Functions 1
Catalog Order No. 659245
Recommended Flow 10 GPM
lbs
723 747 1,019 1,043 1,049 1,073 1,077 1,101
HYDRAULIC FUNCTIONS
INSTALLATION KIT
Minimum Flow 5 GPM
32" 32" 32" 32" 32" 32" 32" 32"
Horizontal Ctr. of Gravity
0° 0° 0° 0° 0° 0° 0° 0°
Effective Thickness
III III III III III III III III
Weight
65G-RRB-10B 65G-RRB-20B 65G-RRB-13B 65G-RRB-23B 65G-RRB-14B 65G-RRB-24B 65G-RRB-15B 65G-RRB-25B
Min. Truck Carriage Width
Mtg. Angle
kg
➀ ➀ 6,500 6,500 6,500 6,500 6,500 6,500
Mtg. Class
lbs
Catalog Order No.
Fork Bar Width (Fork Spread)
ET
Fork Length
Capacity @ 24" (600 mm) Load Center
5"
HCG
Maximum Pressure 2,300 PSI/160 bar
Model Rotator Speed Rotator Torque 65G 5.2 RPM @ 15 GPM 80,000 Inch-Lbs. @ 2,300 PSI/160 bar X Optional motors providing faster rotation are available. Reduced torque will result.
ROTATOR OPTIONS Hydraulic Bin Retainer Custom designed to clamp on top of bin to hold bin in place while rotating. Typically used when bin does not have fork pockets. Mechanical Bin Retainer Class II, designed to retain lightweight bins.
Electronic Rotational Control Provides 90˚ and 180˚ stops during 360˚ rotation, which automatically stops load at each quadrant of rotation. (Factory Installed)
Fork Restraints to limit fork movement.
Cascade Corporation • PO Box 20187 • Portland, OR 97294-0187 • USA • 800 CASCADE (227.2233) • Tel 503.669.6257 • Fax 800.693.3768 • Fax 503.669.6367 Cascade Canada Ltd. • 5570 Timberlea Blvd. • Mississauga, Ontario L4W 4M6 • Canada • 800.380.2272 • Tel 905.629.7777 • Fax 905.629.7785 Cascade is a registered trademark of Cascade Corporation. © Cascade Corporation 2005. All rights reserved.
Form 6057266 US 10M CG 12/05
www.cascorp.com
