Transcript
Digital Signage Professional Video Extender
Digital Video Extender Low Power, Small Form Factor, HDMI with Audio
ADDERLink DV104T
Digital video/audio switch and extender to drive up to four remote displays
PRODUCT IN BRIEF
FEATURES
ADDERLink DV104T is a high performance digital video extender and splitter that enables you to locate your critical play out hardware in a secure and temperature controlled environment away from the display point environment whilst maintaining the same user experience.
Two video inputs, four video output splitter and extender The ALDV104 is an intelligent non blocking cross point switch and extender.
• • • • • •
Proof of Display (P.O.D.) 50 meter extension distance Plug and Play Two video inputs, four video outputs 2x4 HD Digital matrix Line powered receivers
dynamically via the web interface or controlled by a 3rd party control system. Proof of display via IP network The unit determines if the entire system is operating correctly and video is visible on the monitors. It can detect if video is present from the player and whether the cables to the monitors are attached and the monitor is turned on. This information is available by an IP socket thus allowing remote diagnostics and integration into content management systems. Source failover The unit can be set to detect that a video stream is present at the input. The unit can be set to automatically switch over to the second video input if the primary fails. Security Security on the web interface is by HTTP digest authentication (RFC 2617) with username and password as requested information. API for 3rd party integration The API documentation to control and receive data from the unit is provided with the system. Digital audio Supports 8 channels of HDMI audio.
Perfect HD Digital Video The ALDV104T uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. 50 meters over a single CATx cable Video, audio and power all pass along a single CATx cable, providing up to 50m of extension. Distance can be dependent upon CATx cable types and the number of connection breaks for patch panels and wall plates. See overleaf for details. Dual head extension With two inputs, the system is suited to extending and splitting dual head systems. power supplies are required The receivers are designed to be highly of the power required by competing systems. Power is supplied along the CATx cable meaning the support infrastructure required is minimal. EDID management The system has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. Plug and Play state so you can plug and play. There is no need for additinal drivers or software.
Experts in Connectivity Solutions
ADDERLink DV104T
Digital video/audio switch and extender to drive up to four remote displays
TECHNICAL SPECIFICATIONS
EXTENSION DISTANCE INFORMATION Recommended cables are CAT7a shieleded foiled twisted pairs:
1920 x 1200@60Hz
CAT7a
0
50 meters
1920 x 1200@60Hz
CAT6a (shielded)
0
50 meters
1920 x 1200@60Hz
CAT6a (shielded)
2
40 meters
1920 x 1200@60Hz
CAT7a
2
40 meters
Daetwyler 7702 Daetwyler 7120
Flexible patch cable Bulk cable
Category 6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
ORDERING INFORMATION
Hardware compatibility requirement dependent. Will also connect to DVI/DisplayPort with suitable cables HDMI interface The system supports resolutions such as 480p, 720p, 1080P or WUXGA (1920x1200) @60Hz and 24 bit color depth. Does not support HDCP Software compatibility All known operating systems Audio The system delivers eight channels of HDMI audio with sample sizes of 16, 20 or 24 bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz Connections 2 x HDMI type A male, 4 x CATx sockets for link outputs, 1 x 6P6C RJ12 connector (options port) 2.5mm DC power jack Operating temperature 0 to 40ºC / 32 to 104ºF
XX UK US EURO AUS
: DV104 Transmitter unit plus 4 receivers : ALDV104T only = Mains Lead Country Code: = United Kingdom = United States = Europe = Australia
ADDITIONAL ACCESSORIES VSCD12: locking HDMI 1.5 metre cable : 50m CAT7 Shielded foiled twisted pair cable 19” 3U rack mount chassis Universal fascia & mounting kit HDMI reciever
Physical design Compact case, robust metal construction: 115mm / 4.5’’ (w) x 114mm / 4.5’’(d) x 26mm / 1’’(h). Weight 440g / 0.97 lb Power 3pin Toby jack (power adapter input to power adapter. 12VDC 18W output from power adapter Approvals CE, FCC
Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 meters. Preferably patch cables should be of type CAT7a and less than 2 meters. Patch cables over 2 meters must be CAT7a.
RELATED PRODUCTS Adder offer a vast range of products to suit your needs. Other products you may be interested in include: ADDERLink DV120 ALDV120P; ALDV120R
ADDERLink DV100 ALDV100P; ALDV100R
ADDERLink LPV150 ALPV150P; ALPV150R
ADDERLink LPV154T ALPV154T
Proof Of Display (P.O.D): Adder’s unique P.O.D. system can be accessed by any computer, connected to your network. © Copyright 2014 Adder Technology Ltd. All brand names and trademarks are the property of their respective owners. LM-ALDV104t_v6.indd
ADDER TECHNOLOGY Tel: +44 (0)1954 780044 Fax: +44 (0)1954 780081 email:
[email protected] www.adder.com
ADDER CORPORATION USA and Canada Tel: +1 888 932 3337 Fax: +1 888 275 1117 email:
[email protected] www.adder.com
ADDER ASIA Tel: +65 6288 5767 Fax: +65 6284 1150 email:
[email protected] www.adder.com
