Preview only show first 10 pages with watermark. For full document please download

Ademco - 650-651 Series Passive Infrared Motion Detectors Installation Instructions Addendum

   EMBED

Share

Transcript

ADDENDUM TO: RE: INSTALLATION INSTRUCTIONS for Nos. 650 and 651 SFRIFL PASSIVE INFRARED MOTION DETECTORS USE OF ZONE LOCATOR LED In the ADJUSTMENT and TESTING, Alignment section of the accompanying issue of the installation instructions (P4925) please make the following changes. At the top of Page 16, in the first paraqraph (which begins: the Zone Locator LED.. .‘I 1 change the first sentence to read: “To use To use the Zone Locator LED, remove the small blue dot sticker from the-front of the detector’s optical head and insert the screw provided with the Zone Locator LED in the threaded hole found behind the sticker. Change the next paragraph to read: . When the desired aiming is obtained, tighten the panning screw firmly, taking care not to disturb the alignment. Remove the Zone Locator LED, but leaue its mounting screw in place. P4925XX 3/02 Co-t www.PDF-Zoo.com 92 86 0 1982 PWWAYCOWORATIUU