Transcript
Previous Menu K3287 5/98
INSTALLATION INSTRUCTIONS PassPoint Express is a Windows 95 software program that allows you to configure and operate the PassPoint access control system. Essentially, PassPoint Express allows your PC to communicate with the main logic board of the access control system. With PassPoint Express, you can configure all of the options necessary to get your system up and running, perform system maintenance, and monitor system functions. While monitoring the system, PassPoint Express displays a scrolling list of system events. A user can then log on and enter the program’s visually oriented system, which allows full screen editing of configurable options.
System Requirements In order to install and run PassPoint Express, your PC will need to have the following minimum configuration: Minimum •
Pentium 90 Class processor
•
16MB RAM
•
20MB free hard disk space
•
Windows 95
•
SVGA video display, 800x600 resolution, 256 color
•
Mouse
•
1 serial port available for MLB
Optional •
1 serial port for TWAIN digital camera
•
TWAIN compliant scanner
•
2 Hayes-compatible 28.8 or 33.6 modems (for remote operation)
•
Integral Flashpoint Lite or better (for on-screen video)
www.PDF-Zoo.com
Installing PassPoint Express To install PassPoint Express on your PC, follow the procedure below: 1. Starting from the Windows 95 main screen, insert disk 1 from the set of disks supplied with your Access Starter Kit. 2. In the Windows 95 Start Menu, select Run. In the dialog box that appears, type “a:\setup” and press Enter. In a few moments the first screen of the PassPoint Express installation program will appear. The PassPoint Express installation program has been designed to walk you step by step through the installation process. The program will prompt you for the necessary information. Each time you complete a step, click Next to go on to the next step. Once you have completed the installation process, the PassPoint Express icon will automatically appear on your desktop and under Programs in your Start menu.
Starting PassPoint Express To start PassPoint Express on your PC: 1. Double-click the PassPoint Express icon. In a few moments, the system will prompt you for a user name and password: 2. Enter installer in both fields and click OK. Once you click OK, the system brings up a New Account dialog box, followed by a setup wizard to help you configure your installation. For information these steps, refer to the PassPoint Express Installation and Setup Guide.
165 Eileen Way, Syosset, New York 11791 Copyright 1998 PITTWAY CORPORATION
www.PDF-Zoo.com
