Transcript
AD-50V Parts Manual 24 VAC Phase 5
American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 e-mail:
[email protected] www.amdry.com
033000JCARRITA/abe
ADC Part No. 450345
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ____________________________
MODEL NO.
AD-50V
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s)
________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents OPL Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................... 3 Coin Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................... 4 Control Door Assembly For Models Mfd. prior to July 1, 2002 ................................................................................................ 5 Phase 5 Coin Microprocessor Control Panel Assembly ....................................................................... 6, 7 Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 8 Coin and OPL Control Box Assembly ..................................................................................................... 9 Coin Vault Assembly ............................................................................................................................. 10 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 1, 2000 ....................................................................................... 11 Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000 ................................................................................... 12 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002 .......................................................................................... 13 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002 ...................................................................................... 14 Front Panel Assembly For Models Mfd. with Steel Main Door ............................................................................................ 15 Front Panel Assembly For Models Mfd. with Plastic Main Door .......................................................................................... 16 Main Door “Steel” Assembly ................................................................................................................ 17 Plastic Main Door Assembly ................................................................................................................. 18 Main Door Switch Assembly For Models Mfd. with Steel Main Door ............................................................................................ 19 Main Door Switch For Models Mfd. with Plastic Main Door .......................................................................................... 20 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. as of August 10, 2000 ........................................................................................... 21 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. prior to August 10, 2000 ....................................................................................... 22 Idler Bearing Assembly ......................................................................................................................... 23 Basket (Tumbler) Bearing Assembly For Models Mfd. as of July 17, 2000 .......................................................................................... 24, 25
Basket (Tumbler) Bearing Assembly For Models Mfd. prior to July 17, 2000 ...................................................................................... 26, 27 Basket (Tumbler)/Support Assemblies ............................................................................................. 28, 29 Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 30, 31 Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 32, 33 Sensor Bracket Assemblies ............................................................................................................. 34, 35 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 7, 2000 .......................................................................................... 36, 37 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to April 7, 2000 ...................................................................................... 38, 39 Electric Oven Assembly .................................................................................................................. 40, 41 Gas Burner Sail Switch/Hi-Limit Assemblies .......................................................................................... 42 Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 43 3-Phase (3ø) Motor, Electric Relay Panel Assembly ........................................................................ 44, 45 460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly ....................................................... 46 Reversing Electric Relay Panel Assembly ............................................................................................... 47 460-480 VAC Reversing Electric Relay Panel Assembly .................................................................. 48, 49 Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 50, 51 Steam Coil/Mechanical Steam Damper Assembly Option ................................................................ 52, 53 Outer Top/Back Guard Assemblies ....................................................................................................... 54 Microprocessor Coin Acceptors Listing ................................................................................................ 55 Coin Meter Replacement Parts ............................................................................................................. 56 Electric Oven Component Application Chart ......................................................................................... 57 Additional Parts Available ..................................................................................................................... 58
OPL Control Door Assembly
3
For Models Mfd. as of July 1, 2002
Illus. No. 1 2
3 4 5 6 7 8 9
Part No.
Qty.
881053 870011 883550
1 1 1
883551
1
883552
1
117604 150317 102603 102601 102502 150321 154011
3 2 1 1 1 2 2
Telephone: (508) 678-9000
Description ADC Logo with Tape Double Sided Tape Kit White Control Door Assembly (includes illus. nos. 2 and 3) Ivory Control Door Assembly (includes illus. nos. 2 and 3) Coral Blue Control Door Assembly (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10-16 x 3/4” TORX + BTN Type 1 Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod #10-32 x 1/2” Phillips Machine Screw #10-32 Multi-Thread U-Nut
Fax: (508) 678-9447
4
Coin Control Door Assembly For Models Mfd. as of July 1, 2002
Illus. No. 1 2 3 4
5 6 7 8 9 10 11
Part No.
Qty.
160015 160104 160016 881053 883477
1 1 1 1 1
883478
1
883549
1
883476 117604 152014 150317 102603 102601 102502
1 6 4 2 1 1 1
American Dryer Corporation
Description High Security Lock Assembly Key ONLY Lock Cam ONLY ADC Logo with Tape White Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) Ivory Control Door with Black Trim (includes illus. nos. 4 through 7) Coral Blue Control Door with Black Trim (includes illus. nos. 4 through 7) Black Trim Strip with Lock Hole Neoprene Sponge Tape (sold by the foot) 1/4-20 with 3/4” Free Spin Wash Nut #10-16 x 3/4” TORX + BTN Type 1 Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod
88 Currant Road / Fall River, MA 02720-4781
5
Control Door Assembly For Models Mfd. prior to July 1, 2002
Illus. No. 1
2 3 4
5 6 7 8 9 10
Part No.
Qty.
160015
1
160017
1
160104 160052 881053 870011 882511
1 1 1 1 1
882513
1
882512
1
882509
1
117603 150300 102603 150300 102502 102601
3 2 1 2 1 1
Telephone: (508) 678-9000
Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit White High Security Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Almond “B” High Security Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Coral Blue High Security Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Stainless Steel High Security Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Noise Suppressor Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch #10-16 x 1/2” Hex Washer TEK Screw Control Door Support Rod Control Door Rod Retainer Clip
Fax: (508) 678-9447
6
Phase 5 Coin Microprocessor Control Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. 1 2
Part No.
Qty.
112526 883537
1 1
883538
1
883582
1
883581
1
883539
1
883540
1
883580
1
883579
1
5 6 7
150309 137213 824998 153010 150005 ---------
1 1 1 2 2 1
8
--------
1
9 10
137023 137021 880772 122800 136048
1 3 1 1 1
3 4
11
Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002) Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY (for models mfd. as of June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. as of June 25, 2002) Coin Control Panel ONLY (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. prior to June 25, 2002) #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 55) Optic Switch ONLY (refer to Microprocessor Coin Acceptors Listing on page 55) Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No. 1
2
3 4 5 6 7
Part No.
Qty.
112535 112276 112275
1 1 1
112277
1
112278
1
801255 801256 801206
1 1 1
801207
1
137222 137231 824998 153010 150005 150309 136048
1 1 1 2 2 1 1
Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English ONLY)...Not Illustrated 3-Language OPL Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated 3-Language OPL Stick-On Labels (English, Spanish, and Hebrew)...Not Illustrated 5-Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Coin and OPL Control Box Assembly
Illus. No.
*
Part No.
Qty.
1
132002
1
2 3 4
150300 150301 131931
2 2 1
5
137035
1
6
323583
1
7 8 9 --
150300 122641 122706 122801
2 1 * 1
Description Transformer (for mechanical steam damper models - 208 VAC and higher Only) #10-16 x 1/2” Hex Washer TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Steam Valve Relay - 24 VAC (for mechanical steam damper models Only) Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2” Hex Washer TEK Screw 15-Pin Microprocessor Controller (computer) Connector Socket Terminal ONLY Pin/Socket Extraction Tool
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Illus. No. 1
Part No.
Qty.
802112
1
802117 802110
1 1
4
802115 160028 875061 160105* 802020
1 1 1 1 1
5 6 7 8
152014 102502 102601 102603
4 1 1 1
2 3
*
Coin Vault Assembly
Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 4) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
11
For Models Mfd. as of November 1, 2000
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8
824298 824299 824175 122301 131932 120730 151000 882903
1 1 1 1 3 1 6 1
9 10 11 12 13 14 15
850392 153010 152000 150207 150110 112563 124104 124105
2 3 2 4 1 1 1
Telephone: (508) 678-9000
Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer
Fax: (508) 678-9447
12
Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000
Illus. No. 1 2 3
4 5 6 7 8 9 10 11 12 13 14 15 16 17 ---
Part No.
Qty.
123005 122400 882596
1 1 1
882600
1
850456 131917 150207 154001 152000 153010 120730 150110 131932 151000 112050 124103 124025 124030 132198 882540 882573
1 1 2 2 2 2 1 4 1 4 1 2 1 1 1 1 1
American Dryer Corporation
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 16) Dual Timer Reversing Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 17) Dual Timer Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY Arrow Timer Knob 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC Reversing Timer - 24 VAC Panel Wiring (non-reversing panel)...Not Illustrated Panel Wiring (reversing panel)...Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
13
Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 --
Part No.
Qty.
123005 122400 824172
1 1 1
824109 131932 154001 123225 125601 153010 152016 120712 150300 122602 122700 122801
1 1 2 1 1 2 2 1 1 1 7 1
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Less Coin Meter (includes illus. nos. 2 through 5, 7, and 8) Coin Meter Control Panel ONLY 24 VAC Relay #10-24 Speed Nut (used on P/N: 131932, 24 VAC relay) Green Push-To-Start Button 25¢ Coin Meter - 24 VAC (specify timing) #6 Star Washer #4-40 Hex Nut 12-Position Terminal Block #10-16 x 1/2” Hex Washer TEK Screw 9-Pin Connector Pin Terminal ONLY Pin Extraction Tool
NOTE: For Coin Meter Replacement Parts refer to page 56. Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002
Illus. No.
*
Part No.
Qty.
1 2 3
123005 122400 824020
1 1 1
4 5 6 7* 8 9 10 11 12 ---
800054 131917 150207 154001 125601 150303 120712 150309 122602 122700 122801
1 1 2 2 1 2 1 1 1 9 1
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter - 24 VAC (specify timing) #4 x 3/4” Pan Head “A” Screw 12-Position Terminal Block #10-16 x 1/2” Hex Head TEK Crimptite Screw 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool
Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 56. American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Front Panel Assembly For Models Mfd. with Steel Main Door
Illus. No. 1
Part No.
Qty.
883137
1
883138
1
883139
1
3 4
150313 150318 ---------------
11 1 1 1
5 6
170330 154215
1 2
2
Telephone: (508) 678-9000
Description White Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Ivory Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) #10-16 x 1/2” TORX Plus BTN Type 1 25 IP TORX Plus Bit 1/4 Hex (for removal of TORX head screw) Main Door Hinge Lint Drawer Switch (refer to Lint Drawer/Lint Drawer Switch Assemblies on page 21 and page 22) Friction Door Latch 5/32” Pop Rivet
Fax: (508) 678-9447
16
Front Panel Assembly For Models Mfd. with Plastic Main Door
Illus. No. 1
Part No.
Qty.
882525
1
882527
1
882528
1
2 3 4
150309 121405 --------
11 1 1
5 6
170330 154215
1 2
American Dryer Corporation
Description White Right Hand Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Almond “B” Right Hand Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Coral Blue Right Hand Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet Lint Drawer Switch (refer to Lint Drawer/Lint Drawer Switch Assemblies on page 21 and page 22) Friction Door Latch 5/32” Pop Rivet
88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel” Assembly
Illus. No.
Part No.
Qty.
1
881150
1
2 3
102354 170731 881152
1 1 1
4 5 6
150445 153031 881151
2 1 1
7 8 9 10 11 12 13 14 15
150445 150683 152014 151010 150120 150683 152014 881210 102211 170731
2 3 3 1 1 3 3 1 1 1
Telephone: (508) 678-9000
17
Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Black Gasket Adhesive (10.7 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/2-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/2-20 Free Spin Wash Nut Black Main Door Handle ONLY 20-7/16” Door Glass Black Glass Adhesive (10.3 oz. cartridge)
Fax: (508) 678-9447
18
Illus. No.
Plastic Main Door Assembly
Part No.
Qty.
1
881422
1
2 3 4 5 6
800448 150410 152014 102349 102212 170730 150448 170319 150431
1 4 4 1 1 1 4 4 1
7 8 9
American Dryer Corporation
Description Black Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with (4) Holes Main Door Gasket/Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (Nylon) Spacer Main Door Latch Screw (#10 x 7/16” Dome Hex Head Screw)
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
19
For Models Mfd. with Steel Main Door
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
150006 152013 153010 137005 122636 881211 881153
2 2 2 1 2 1 1
7
150301
2
Telephone: (508) 678-9000
Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch Flag Terminal Black Main Door Switch Housing ONLY Black Main Door Switch Housing Complete (includes illus. nos. 1 through 4, and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
20
Main Door Switch For Models Mfd. with Plastic Main Door
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
152013 153008 137005 121028 154281 800448
2 2 1 2 2 1
7 8 9 10
153565 881246 150201 121405
2 1 2 1
American Dryer Corporation
Description #6-32 Hex Nut #6 Lock Washer Single Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacer 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head Screw Rubber Grommet
88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Lint Drawer Switch Assemblies
21
For Models Mfd. as of August 10, 2000
Illus. No. 1
Part No.
Qty.
883161
1
883162
1
883163
1
6
117605 122116 122605 122701 122801 818087
5 1 2 4 1 1
7 8 9
304136 150301 122700 122604
1 2 4 2
2 3 4 5
Telephone: (508) 678-9000
Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Ivory Lint Drawer Assembly (includes illus. nos. 1 and 2) Neoprene Sponge Tape (sold by the foot) Lint Drawer Switch 4-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 3 through 6) Lint Drawer Switch Box Cover ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY
Fax: (508) 678-9447
22
Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. prior to August 10, 2000
Illus. No.
Part No.
Qty.
1
882629
1
882634
1
882628
1
7
117605 108225 122116 122605 122701 122801 800478
5 1 1 2 4 1 1
8 9 10
304136 150301 122700 122604
1 2 4 2
2 3 4 5 6
American Dryer Corporation
Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Almond “B” Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Neoprene Sponge Tape (sold by the foot) Lint Screen Assembly Lint Drawer Switch ONLY 4-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) Lint Drawer Switch Box ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY
88 Currant Road / Fall River, MA 02720-4781
23
Idler Bearing Assembly
Illus. No. 1
Part No.
Qty.
100100
1
100108
1
101129 100105
1 1
100112
1
4 5 6
154301 100705 882576
2 1 1
7 8 9 10 11 12
150617 153005 153004 801009 152004 150509
2 2 2 1 1 1
2 3
Telephone: (508) 678-9000
Description 5L-660 V-Belt (basket [tumbler] to idler) For Non-Reversing Models ONLY 5L-680 V-Belt (basket [tumbler] to idler) For Reversing Models ONLY 9” x 2-1/2” Compound Pulley 4L-520 V-Belt For Non-Reversing Models ONLY 4L-610 V-Belt (idler to motor) For Reversing Models ONLY 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
24
Basket (Tumbler) Bearing Assembly For Models Mfd. as of July 17, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
25
For Models Mfd. as of July 17, 2000
Illus. No. 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Part No.
Qty.
880220 153025 152050 882544
1 4 4 1
882545
1
882542 882543 880202 880779 150601 153004 153004 153005 152005 154326 152004 150621 153002 153004 150501 102120 824807 100735 101100 101118 101110 100100 100108 150610 152004
1 1 1 1 2 2 2 2 2 2 2 2 4 6 4 1 1 1 1 1 1 1 1 2 2
Telephone: (508) 678-9000
Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 17) Pillow Block Bearing Assembly Complete with Rotational Sensor (includes illus. nos. 4 through 18) Pillow Block Bearing Platform ONLY Pillow Block Bearing Platform ONLY 1-3/8” Pillow Block Bearing 1-3/8” Pillow Block Bearing (for reversing models Only) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 3/8” Flat Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet (for reversing models Only) Rotational Sensor Assembly Shaft Key (for reversing models Only) 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1” Taper Lock Bushing (for reversing models Only) 5L-660 V-Belt (basket [tumbler] to idler) For Non-Reversing Models Only 5L-680 V-Belt (basket [tumbler] to idler) 5/16-18 x 1-1/2 Allen Setscrew 5/16-18 Hex Nut
Fax: (508) 678-9447
26
Basket (Tumbler) Bearing Assembly For Models Mfd. prior to July 17, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
27
For Models Mfd. prior to July 17, 2000
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Qty.
880220 153025 152050 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101
1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1
801103
1
17 18
801105 801104 880779
1 1 1
19 20 21
880202 152004 150610 101100
1 2 2 1
101118
1
101110
1
100735 154301 100713 100100
1 2 1 1
100108
1
824807
1
22 23 24
25 *
Part No.
Description 1-3/4” Flange Bearing with Nylock Setscrews 9/16” Lock Washer 9/16-12 Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) For Models Mfd. without Rotational Sensor 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4 through 6, 16 and 17) 1-3/8” Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8” Pillow Block Bearing Assembly with Magnet (for models mfd. with rotational sensor) 1-3/8” Pillow Block Bearing with Nylock Setscrews 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1” Taper Lock Hub (key is not included) For Reversing Models ONLY Shaft Key (for taper lock hub) 5/16-18 x 1” Allen Setscrew 1/4” x 1/4” x 7/8” Key 5L-660 V-Belt (basket [tumbler] to idler) For Non-Reversing Models ONLY 5L-680 V-Belt (basket [tumbler] to idler) For Reversing Models ONLY Rotational Sensor Assembly (option)
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
American Dryer Corporation
Basket (Tumbler)/Support Assemblies
88 Currant Road / Fall River, MA 02720-4781
29
Basket (Tumbler)/Support Assemblies
Illus. No. 1*
2 3 4 5 6 7 8 9 10 11 --*
Part No.
Qty.
800838 800736 800837
1 1 1
882683
1
150413 150429 301302 301311 150500 100903 153004 800616 152005 153005 153004 116001 401010
40 1 2 2 1 4 4 1 4 4 4 1 1
Description Galvanized Basket (tumbler) ONLY (without felt collar) Stainless Steel Basket (tumbler) ONLY (without felt collar) Galvanized Basket (tumbler) and Support Assembly with Tapered Ribs (includes illus. nos. 1 through 10) Stainless Steel Basket (tumbler) and Support Assembly with Tapered Ribs (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX Crimptite Screw TORX Screw Hand Driver Basket (tumbler) Rib ONLY (low rib) Tapered Basket (tumbler) Baffle Rib ONLY (high rib) 5/16-18 x 3/4” Socket Button Head Screw 3/8-16 x 38-1/2” Tie Rod 3/8” Flat Washer Basket (tumbler) Support ONLY 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube)
Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
Illus. No.
Non-Reversing T.E.F.C. Motor Mount Assembly
Part No.
Qty.
1 2
100105 100701
1 1
3
101132
1
101133
1
150501 153002
4 4
4 5
American Dryer Corporation
Description 4L-520 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key (for use on 3ø models Only) 5/8” x 2” Motor Pulley (for use on 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for use on 50 Hz models Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer
88 Currant Road / Fall River, MA 02720-4781
31
Non-Reversing T.E.F.C. Motor Mount Assembly (continued)
Illus. No.
Part No.
Qty.
6 7
153001 100069*
4 1
100068
1
122701 122801 137030 152004 153002 153001 117604 154000 850017
8 1 1 4 4 4 4 4 1
817029*
1
817074*
1
817080*
1
883271*
1
153050 100604 100702 153050 152006 120200 100007*
3 1 1 1 2 1 1
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 *
Description 5/16” Flat Washer 3/4 HP 120-230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) For 60 Hz Models ONLY 3/4 HP 240v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) For 50 Hz Models ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Neoprene Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY with Gasket (56Z frame) (includes illus. no. 13) 3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 3 through 7 and 13 through 20) 3/4 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 3 through 7 and 13 through 20) 1/2 HP 208/230/380/460v 3ø 60 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2 HP 208/230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 12-1/2” Impellor (fan/blower) with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame)
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
American Dryer Corporation
Reversing T.E.F.C. Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
33
Reversing T.E.F.C. Motor Mount Assembly
Illus. No. 1 2 3
Qty.
100112 100701 101132
1 1 1
101133
1
4 5*
120200 181003
1 1
6 7 8 9*
150501 153002 153001 100007
4 4 4 1
10 11 12 13 14 15 16 17 18
120200 150501 153002 153001 154000 152004 153002 153001 850070
1 4 4 4 8 7 4 4 1
803802*
1
803803*
1
117604 153050 100702 100604 153050 152006
4 1 1 1 2 2
19 20 21 22 23 24 *
Part No.
Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C) (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 3/8” x 90° Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman Nut 5/16” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY with Gasket (56Z frame) (includes illus. no. 19) Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For 60 Hz Models ONLY Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For 50 Hz Models ONLY Neoprene Sponge Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
American Dryer Corporation
Sensor Bracket Assemblies
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2 3 4 5 6 7 8 9 10
130301 153010 152000 121028 122701 122605 154007 150005 817046
1 2 2 2 4 1 2 2 1
11 12 13 14 15 16 17 18 19 20 21 22 23 24
322062 122604 122700 150301 150005 130111 130100 130301 130101 153010 152000 882535 121028 122701 122605 882534
1 1 4 2 5 1 1 1 1 5 5 1 4 4 1 1
25
882536
1
322062 122604 122700 122801 150301
1 1 4 1 2
26 27 28
Telephone: (508) 678-9000
35
Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Thermostat 150° Thermostat 225° Manual Reset Thermostat 180° Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper ONLY Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Noncomputer Sensor Bracket Assembly Complete (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
36
Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 7, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
37
Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 7, 2000
Illus. No. 1 2 3 4* 5 6 7 8 9 10 11 12 13 14 15 16 17 18
-------
Part No.
Qty.
141105 151001 150108 140820 140806 141232 150309 318714 128927 880960 140411 880134 882537 150300 817027 128935 152013 142707 142506 142600 142809 817062
3 3 3 3 3 1 3 1 1
817063
1
850899 882271* 883310**
1 1 1
1 1 2 1 1 2 1 1 1 1 1
Description Large Tube Burner #8-32 Pal Nut #8-32 x 1/2” Pan Head Machine Screw #29 Natural Gas Burner Orifice #46 Liquid Propane (L.P.) Burner Orifice 1/2” Direct Spark Ignition (DSI) Manifold (3-port) #10-16 x 1/2” Hex Head TEK Crimptite Screw Gas Valve Bracket (horizontal) 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Redundant (liquid propane [L.P.] gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit Ignitor Probe Assembly Flame-Probe Wire #10-16 x 1/2” Hex Washer TEK Screw Direct Spark Ignition (DSI) Module Mounting Bracket Assembly Johnson Controls Direct Spark Ignition (DSI) Module with 3 Tries #6-32 Hex Nut 1/2” x 1-1/2” Black Nipple 1/2” Street Elbow 1/2” Black Union 1/2” x 29” Pipe/Nipple Direct Spark Ignition (DSI) Burner Assembly Complete (natural gas) (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition (DSI) Burner Assembly Complete (liquid propane [L.P.] gas) (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition (DSI) Burner Box ONLY ADG-50V Liquid Propane (L.P.) Conversion Kit (includes orifices) Steam to Gas Transition Plate...Not Illustrated
* Consult factory for elevations over 2,000 feet. ** Needed when converting dryer from steam heat to gas heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to April 7, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to April 7, 2000
Illus. No.
Part No.
Qty.
1 2 3 4*
141105 151001 150108 140820 140806 141232 318700 150300 128927 880960 140411 880134 882537 128935 817027 150309 152013 141313 142809 318712 150309 850899 882271* 883310**
3 3 3 3 3 1 2 2 1
5 6 7 8 9 10 11 12 13 14 15 16 17 18 -----
1 1 1 1 3 2 1 1 1 4 1 1 1
Description Large Tube Burner #8-32 Pal Nut #8-32 x 1/2” Pan Head Machine Screw #29 Natural Gas Burner Orifice #46 Liquid Propane (L.P.) Burner Orifice 1/2” Direct Spark Ignition (DSI) Manifold (3-port) Pipe Bracket (Bent) #10-16 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Redundant (liquid propane [L.P.] gas) Gas Valve 1/2” Valve Liquid Propane (L.P.) Conversion Kit Ignitor Probe Assembly Flame-Probe Wire Johnson Controls Direct Spark Ignition (DSI) Module with 3 Tries Direct Spark Ignition (DSI) Module Mounting Bracket Assembly #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 Hex Nut 90º x 1/2” x 1” Gas Shutoff Assembly 1/2” x 29” Pipe/Nipple Gas Valve Pipe Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Burner Box ONLY ADG-50V Liquid Propane (L.P.) Conversion Kit (includes orifices) Steam to Gas Transition Plate...Not Illustrated
* Consult factory for elevations over 2,000 feet. ** Needed when converting dryer from steam heat to gas heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
American Dryer Corporation
Electric Oven Assembly
88 Currant Road / Fall River, MA 02720-4781
41
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803007* --------* --------* 150300 802800 802801
1 1 2 1 1
154004 150300 802799 122200 150303 105500 319202 154002 150300 803100 320611 150301 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011 --------* 153009 321301 150207 883310**
1 2 1 1 2 1 1 1 2 1 1 2 1 2 2 1 3 1 1 1 2 1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ---
Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 290° Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 1/2” Phillips Pan Head Machine Screw Steam to Electric Transition Plate...Not Illustrated
* Refer to Electric Oven Component Application Chart on page 57. ** Needed when converting dryer from steam heat to electric heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
Gas Burner Sail Switch/Hi-Limit Assemblies
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
154004 150300 802799 150303 122200 105500 319202 154002 802800 802801
1 2 1 2 1 1 1 1 1 1
10 11 12 13 14 15
142809 150300 319704 151000 150001 130201
1 2 1 2 2 1
American Dryer Corporation
Description Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Assembly Complete (includes illus. nos. 1 through 9) 1/2” x 29-1/8” Pipe/Nipple #10-16 x 1/2” Hex Washer TEK Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330° Manual Reset Hi-Limit Thermostat ONLY
88 Currant Road / Fall River, MA 02720-4781
43
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5
6 7 8 9 10 11 12 13 14 15
Part No.
Qty.
151000 150300 150008 120716 322817 882662
2 2 2 1 1 1
882663
1
882652 882653 136008 136049 136057 150301 150297 152004 121010 153002 132459 121300
1 1 1 or 2 1 2 1 1 1 1 1 1 3
Telephone: (508) 678-9000
Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 2-Position Terminal Block Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 120 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 208-240 Volt (includes illus. nos. 1 through 14) Transformer Assembly - 120 Volt Transformer Assembly - 208-240 Volt Fuse Holder ONLY 3/4-Amp (Slo-Blo) Fuse ONLY - 120 Volt 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing
Fax: (508) 678-9447
44
American Dryer Corporation
3-Phase (3ø) Motor, Electric Relay Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5
6 7 8 9 10 11 12 13 14 15
Part No.
Qty.
151000 150300 150008 120701 120716 322817 882664
2 2 2 1 1 1 1
818400
1
882665
1
818395
1
882667
1
882653 818396 882654 136008 136057 150301 150297 152004 121010 153002 132459 121300
1 1 1 2 2 2 1 1 1 1 1 3
Telephone: (508) 678-9000
45
Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block (for models mfd. with 3ø motors) 2-Position Terminal Block (for models mfd. with 1ø motors) Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 208-240 Volt For Gas and Steam Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly - 208-240 Volt For Electric Heated Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 380-416 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 208-240 Volt For Electric Heated Models ONLY For Models Mfd. with Single-Phase (1ø) Motor ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 380-416 Volt (includes illus. nos. 1 through 14) For Electric Heated Models ONLY For Models Mfd. with Single-Phase (1ø) Motor ONLY Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY Transformer Assembly - 380-416 Volt Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing
Fax: (508) 678-9447
46
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly
Part No.
Qty.
150009 120701 830208 824161 135501 120768 150301 150297 152004 121010 153002 132459 322817 883332
2 1 1 1 1 2 4 2 1 1 1 1 1 1
830262
1
151000 120765 121300 141403
2 4 1 1
American Dryer Corporation
Description #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block Transformer Assembly (460 VAC) for Micro Models ONLY Transformer Assembly (460 VAC) for Non-Micro Models ONLY 1-Amp Double-Pole Circuit Breaker (460 VAC Only) 35 x 15mm Din Rail #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Ground Screw 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 24 VAC 3-Pole Contactor Mounting Plate ONLY Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY (includes illus. nos. 1 through 14) Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY (includes illus. nos. 1 through 14) #6-32 Pal Nut End Stop Open/Closed Bushing Control Voltage Transformer (24V) for Micro Models ONLY
88 Currant Road / Fall River, MA 02720-4781
Reversing Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16
Part No.
Qty.
150300 150008 120701 132458 882653 825428 882654 136008 136057 150301 150297 152004 121010 153002 132459 322812 882673
2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
883335
1
882676
1
151000 120765
2 1
Telephone: (508) 678-9000
47
Description #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block 3-Pole Reversing Contactor Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY Transformer Assembly - 380-416 Volt Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 208-240 Volt For Gas and Steam Models ONLY (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete (208-240 volt Only) For Electric Heated Models ONLY (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete - 380-416 Volt (includes illus. nos. 1 through 16) #6-32 Pal Nut Standard End Bracket
Fax: (508) 678-9447
48
460-480 VAC Reversing Electric Relay Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
49
460-480 VAC Reversing Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 *
Part No.
Qty.
132458 150297 121010 152004 153002 132459 150300 830208 824161 120765 322817 883327
1 1 1 1 1 1 4 1 1 2 1 1
--------*
1
151000 150009 120701 135501 120768 112068 121300 141403
2 2 1 1 2 1 1 1
Description 24 VAC Reversing Contactor #10 x 1/2” Hex Head TEK Screw (green) L-70 Ground Lug 5/16-18 Hex Nut 5/16” Lock Washer 24 VAC 3-Pole Blower Contactor #10-16 x 1/2” Hex Washer TEK Screw Transformer Assembly (460 VAC) for Micro Models ONLY Transformer Assembly (460 VAC) for Non-Micro Models ONLY End Stop Mounting Plate ONLY 460 VAC Reversing Rear Electric Panel Assembly Complete For Micro Models ONLY (includes illus. nos. 1 through 16) 460 VAC Reversing Rear Electric Panel Assembly Complete For Non-Micro Models ONLY (includes illus. nos. 1 through 16) #6-32 Pal Nut #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block 1-Amp Double-Pole Circuit Breaker 35 x 15mm Din Rail (sold by the inch) 3-Phase (3ø) Power Input Label Open/Closed Bushing Control Voltage Transformer (24V) for Micro Models ONLY
Not available at time of printing. Contact factory for additional information.
Telephone: (508) 678-9000
Fax: (508) 678-9447
50
American Dryer Corporation
Steam Coil/Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Steam Coil/Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165011 153002 152004 152002 153007 820321 880280
1 6 6 4 4 2 1
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
152002 115995 102350 151006 152051 100495 323365 152002 153007 143163 143110 143163 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520
4 60 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1
Telephone: (508) 678-9000
51
Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 11/16” x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Slotted Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
52
Steam Coil/Mechanical Steam Damper Assembly Option
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
53
Steam Coil/Mechanical Steam Damper Assembly Option
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165011 153002 152004 152002 153007 820321 880781
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
115995 102350 309300 154300 153022 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 --------*
66 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1
Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7 through 10) Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) Rod Bracket 1/2” x 3/32” Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2” x 3/32” Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8” Pan Head Machine Screw Mechanical Steam Damper Motor Cam
* The mechanical steam damper motor cam is part of the mechanical steam damper motor.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
Outer Top/Back Guard Assemblies
Illus. No.
Part No.
Qty.
1 2 3*
322809 150301 314424
1 4 1
314422 150301 150300 312533 801577 322018 150301 103500 882099
1 7 10 1 1 1 13 4 1
4 5 6* 7 8 9 10
Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard (for gas models Only) Top Back Guard (for electric models Only) #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Outer Top (for gas models Only) Outer Top (for electric models Only) Bottom Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 8” to 10” Transition Piece
* There is no outer top or top back guard on steam models.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch. Replacement optic switch for Hanke acceptors is Part No. 881143. Replacement optic switch for Greenwald acceptors is Part No. 137056.
Single Coin* ADC Part No.
Nation
883363
United States
882689
United States
125100
U.S. and Canada
125107 881768 881604 125103 125121 125133
Australia Australia Japan ----Hong Kong
Description 25¢ Hanke Optic Coin Acceptor with Four (4) Studs (for models mfd. as of June 25, 2002) 25¢ Hanke Optic Coin Acceptor (for models mfd. between June 15, 2000 and June 25, 2002) 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to June 15, 2000) 20¢ Greenwald Australian Optic Coin Acceptor $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Token Greenwald Optic Coin Acceptor 0.800 Token Greenwald Optic Coin Acceptor $1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin* 881842 881542 881846 881541 *
Canada United Kingdom France Netherlands
25¢ / $1 Hanke Dual Optic Coin Acceptor 1£ / 20 Pence Hanke Dual Optic Coin Acceptor 2 / 5 Franc Hanke Dual Optic Coin Acceptor 25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
Telephone: (508) 678-9000
Fax: (508) 678-9447
56
Coin Meter Replacement Parts
Illus. No.
Part No.
Qty.
1
125541 125540 125500 125501 125502 125503 125504 125506 125507 125508 125510 125515 125516
1 1 1 1 1 1 1 1 1 1 1 1 2
2
3 4
American Dryer Corporation
Description 1/60 RPM 24 VAC / 60 Hz Meter Motor 1/30 RPM 24 VAC / 50 Hz Meter Motor 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch “B” with Arm Meter Switch “A” or “C”
88 Currant Road / Fall River, MA 02720-4781
Telephone: (508) 678-9000
208
240
416
460/480
380
208
240
460/480
208
240
380
30
30
30
30
25
24
24
24
20
20
20
3ø
1ø
1ø
3ø
3ø
3ø
3ø
3ø
3ø
3ø
3ø
PHASE
3 or 4
2
2
3 or 4
3
3 or 4
3 or 4
3 or 4
3 or 4
3
3 or 4
WIRE
883613
8 8 3 6 12
824904
883611
883614
824916
826391
8 2 4 16 2
826391
824972
883615
ASSEMBLY*
6
5
5
6
6
6
6
6
6
6
6
Qty
WITH
4
4
4
4
4
4
5
5
5
5
5
120010
120011
120010
120011
120011
120010
12 0 0 13
120013
12 0 0 13
12 0 0 13
120012
1
1
1
1
1
1
1
1
1
1
1
#8
#4
#2
#8
#6
#4
#8
#8
#8
#4
#4
882571
883385
883384
882572
882568
882566
882571
882572
882571
882566
882566
Part No.
OVEN WIRE CRIMP TERMINAL
Kw Part No. Qty Size
ELEMENT
1
1
1
1
1
1
1
1
1
1
1
121010
121010
121010
121010
121010
112110
121010
121010
121010
121010
121010
Qty Part No.
TERMINAL LUG
*When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable as well as if dryer has Microprocessor controls.
VOLTAGE
KW
OVEN
ADE-50V
2
2
2
2
1
1
1
1
1
1
1
BUS BAR P/N: 121011
DPA33
DPA93
DPA93
DPA33
DPA63
DPA73
DPA43
DPA43
DPA43
DPA73
DPA93
131352
131358
131358
13 13 5 2
131369
131376
131357
13 13 5 7
131357
131376
131358
Cat. No. Part No.
OVEN RELAY
Electric Oven Component Application Chart
57
Fax: (508) 678-9447
58
Part No. 112533 112534 114001 114006 120800 120802 120902 120903 121499 121500 122804 404502 404506 404507 404513 404516 112146 112147 882206
Additional Parts Available
Description “Phase 5 Coin Program Location Summary” Label “Phase 5 OPL Program Location Summary” Label “CAUTION Exhaust/Lint Screen” Label “WARNING - Fire Hazards” Label 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 5-1/2” Harness Tie 8” Harness Tie Manometer (hydro gauge) for measuring Gas Pressure White Brush-In-Cap Bottle Touch-Up (0.6 oz. bottle) Beige Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle) Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle) Wrinkle Blue Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle) Ivory Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle) Phase 5 Coin User’s Manual Phase 5 OPL User’s Manual CD Rom (ADC Publications)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450345
1 - 06/14/00-25
2 * 09/27/01-25
3 * 11/05/02-15
