Preview only show first 10 pages with watermark. For full document please download

Adss* – Non-armoured Multi-fiber Loose Tube Cables – Up To 12 Fibers

   EMBED

Share

Transcript

ADSS* – non-armoured multi-fiber loose tube cables – up to 12 fibers *ADSS = All-Dielectric, Self-Supporting Design Cable design  Strain relief Jacket material Jacket colour  multi-fiber loose tube, jelly-filled Aramide yarn HDPE black Properties Applications • Extremely light weight cable construction • Optimized diameter for easy installation • Metal free outdoor cable • Strain relief with Aramide yarn • For high mechanical requirements • Surface resistance properties • Areal use • Self-supporting Note: Installation material such as support-anchor and dead-end-anchor's are additionally available. According to IEC 60794-1-2 Ordering information 12-.../BW(ZN)V-...55 Please see page 151 94 HUBER+SUHNER FIBER OPTICS ADSS – non-armoured multi-fiber loose tube cables – up to 12 fibers Specification Jacket material Jacket Ø Multi fiber loose tube Approx. weight HDPE 5.5 mini 23 mm kg/km Mechanical properties Tensile strength Min. bend radius Crush resistance during installation in service during installation, 6 turns in service, 6 turns short-term long-term 2800 1400 82.5 55 500 300 > 12 kV Surface resistance N N mm mm N/cm N/cm IEC 60794-1-2 E1 IEC 60794-1-2 E11 IEC 60794-1-2 E3 EN 50305 § 6.6 Thermal properties Temperature range during installation in service in storage –10 to +70 –10 to +70 –10 to +70 °C °C °C 0.81 compliant MJ/m IEC 60794-1-2 F1 Specification for singlemode at 1550 nm, for multimode at 1300 nm Combustion properties Fire load 2002/95/EC (RoHS) Performance under load Span length (m) Sag (%) Sag (m) 50 100 150 200 HUBER+SUHNER FIBER OPTICS Wind load (km/h) 0.75 1.5 1.25 2.25 3.00 Tensile load with wind load (N) 694 100 1664 2081 2774 95