Transcript
FIBER CONVERTERS
FIBER MEDIA CONVERTERS FC1-80010-xxST-1 & FC1-80010-xxRT-1 10-bit Digital 8 Video 1 Bi-directional Contact Closure Standalone & Rack Mount General Description The FC1-80010-xxST-1(standalone) & FC1-80010-xxRT-1(rack mount) support optical transmission of 8 channel high-quality 10-bit PCM coded video with 1 bi-directional contact closure through one multimode or singlemode optical fiber. The card module feature enables it to be fitted in the FCC-18-12 rack mount chassis and thus maximizes the channel capacity by accommodating up to 72 video channels & 9 contact closure channel within one rack mount chassis.
Features
Eight-channel non-compressed 10-bit digital video transmission No video degradation over max. operating distance Signal to noise ratio better than 65 dB Supports NTSC, PAL & SECAM video systems Gold plated BNC connector Supports one bi-directional contact closure Support dry contact or TTL input Contact closure output selectable (NO or NC) Laser diode for optical transmission Excellent suppression of EMI & RFI and elimination of ground loop Optimum sensitivity for power budget concerns Adjustment and maintenance free No setup just plug-and-play Hot-swappable card modules Duplicated LED indicators on the front and rear of the unit for convenience of observation Transient voltage protection on power supply and all signal inputs & outputs Robust design for harsh environment applications
Application Diagram FC1-80010-STST-1 SA 8 Video
FC1-80010-SRST-1
1 Fiber
Contact Closure
8 Video Contact Closure
FIBERTEK PRIVATE LIMITED Website: www.fibertek-ap.com
Email:
[email protected]
Content subjects to change without notice Rev0.2(Jul14) Page 1 of 4
FIBER CONVERTERS Specifications No. of Fibers (Wavelengths)
Model
Optical Power Budget
Max. Distance
1 (1310/1550 nm)
23dB
1 km
1 (1310/1550 nm)
17dB
40 km
Multimode (62.5/125 um) FC1-80010-MTST-1 FC1-80010-MTRT-1 FC1-80010-MRST-1 FC1-80010-MRRT-1 Singlemode (9/125 um) FC1-80010-STST-1 FC1-80010-STRT-1 FC1-80010-SRST-1 FC1-80010-SRRT-1 Notes 1. Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the network. 2. Operating distance of multimode is limited by the characteristics of the fiber bandwidth.
Video No. of Channel:
8
Bandwidth:
≥ 6MHz per channel
Format:
PAL/NTSC/SECAM
Input / Output:
1.0 Vp-p, 75 ohms
Differential Gain:
< 1% typical
Differential Phase:
< 1° typical
Signal-to-Noise Ratio:
> 65dB
Contact Closure No. of Channels:
1
Direction:
Bi-directional
Input:
Dry contact or TTL input FIBERTEK PRIVATE LIMITED Website: www.fibertek-ap.com
Email:
[email protected]
Content subjects to change without notice Rev0.2(Jul14) Page 2 of 4
FIBER CONVERTERS Output:
Dry contact, NO or NC; Max. 32VDC/VAC @ 100mA
Connectors Optical:
ST (standard), FC (optional)
Video:
BNC
Contact Closure:
7-pin screw terminal
Power:
SA: 2-pin screw terminal Card: Future bus connector (In the chassis)
Electrical and Mechanical Power:
SA:
[email protected] Card: From FCC-18-12 chassis
Dimensions (WxHxD):
SA: 156 x 50.5x 223mm (Max) Card: 148 x 41.4 x 213mm (Max)
Weight:
SA: 0.82kg Card: 0.35kg
No. of Rack Slots (For Card):
2
LED Indicators:
Power, Video per channel, Optical carrier detected, CC Tx & Rx
Environmental Operating Temp.:
-40°C to +75°C
Storage Temp.:
-40°C to +85°C
Relative Humidity:
0 to 95% non-condensing
MTBF:
> 100,000 hours
FIBERTEK PRIVATE LIMITED Website: www.fibertek-ap.com
Email:
[email protected]
Content subjects to change without notice Rev0.2(Jul14) Page 3 of 4
FIBER CONVERTERS Ordering Information Model
Description
Multimode (62.5/125 um) 8 Video Transmitter, 1 Contact Transceiver, Digital-10, Multimode, Standalone, ST, 1 Fiber, 23dB, 12Vdc 8 Video Receiver, 1 Contact Transceiver, Digital-10, Multimode, Standalone, ST, 1 Fiber, 23dB,12Vdc 8 Video Transmitter, 1 Contact Transceiver, Digital-10, Multimode, Rackmount, ST, 1 Fiber, 23dB 8 Video Receiver, 1 Contact Transceiver, Digital-10, Multimode, Rackmount, ST, 1 Fiber, 23dB
FC1-80010-MTST-1 FC1-80010-MRST-1 FC1-80010-MTRT-1 FC1-80010-MRRT-1 Singlemode (9/125 um) FC1-80010-STST-1 FC1-80010-SRST-1 FC1-80010-STRT-1 FC1-80010-SRRT-1
8 Video Transmitter, 1 Contact Transceiver, Digital-10, Singlemode, Standalone, ST, 1 Fiber, 17dB, 12Vdc 8 Video Receiver, 1 Contact Transceiver, Digital-10, Singlemode, Standalone, ST, 1 Fiber, 17dB, 12Vdc 8 Video Transmitter, 1 Contact Transceiver, Digital-10, Singlemode, Rackmount, ST, 1 Fiber, 17dB 8 Video Receiver, 1 Contact Transceiver, Digital-10, Singlemode, Rackmount, ST, 1 Fiber, 17dB
Remarks : 1. FC-PA-12V - 12VDC power adapter will be included with all standalone converters, it is supplied with fitted screw-terminal output cables. US, European, UK or Australian power plug available. 2. Card modules will be fitted in the FCC-18-12 19” 4U rack mount chassis which is sold separately. 3. Other fiber connector like FC is available upon request. 4. Please feel free to consult factory for any special requirement and customization.
FIBERTEK PRIVATE LIMITED Website: www.fibertek-ap.com
Email:
[email protected]
Content subjects to change without notice Rev0.2(Jul14) Page 4 of 4
