Transcript
TERMINATION TOOLS & EQUIPMENT
CLEANERS & WIPES Connector Cleaner, Wipes, Fiber Optic Swabs Introduction Fibers work best in clean conditions, thus proper cleaning agents need to be used to maintain the cleanliness of it. As dust particles are not visible to the naked eyes, it is always a good practice to clean the fibers whenever they are exposed to the environment for a period of time.
Connector Cleaner The Connector Cleaner offers lint-free, clean room grade cleaning media which effectively removes dirt, dust, oil, grease and debris from connector end faces. A new resilient rubber pad beneath the cleaning surface prevents scratching, and a sliding cover protects the cleaning media from contamination when not in use. Reel refills available. Model
Description
F1-7020C
Connector Cleaner (estimated 20 ft)
F1-7021C
Cleaning Media Replacement Reel (estimated 20 ft.)
Kim Wipes Kimwipes are standard to be used on its own or with alcohol or solvents. Kimwipes are soft, non-abrasive and designed for use on most delicate surfaces, and thus it enables cleaning without risk of scratching the connector ferrules. Model Kimwipes EX-L
Description Kim Wipes – 280 ply per box
FIBERTEK PRIVATE LIMITED Website: www.fibertek-ap.com
Email:
[email protected]
Content subjects to change without notice Rev1.0(Jul16) Page 1 of 2
TERMINATION TOOLS & EQUIPMENT Fiber Optic Swabs The Fiber Optic Swabs come in 2 sizes which specifically clean fiber optic sleeves of 1.25mm and 2.5mm. It may be used wet or dry to remove dirt and oil contamination, or remove of slurry from the ferrule polishing fixtures.
Model
Description
F1-25123B
1.25mm Wrapped Swabs (100 swabs/bag)
F1-25183
2.5mm Wrapped Swabs (100 swabs/bag)
FIBERTEK PRIVATE LIMITED Website: www.fibertek-ap.com
Email:
[email protected]
Content subjects to change without notice Rev1.0(Jul16) Page 2 of 2
