Transcript
ADX-90
MINIATURE INSTRUMENT CONDENSER MICROPHONE
ADX-90 CONDENSER MIC
overview The ADX-90 is a pre-polarized condenser microphone designed for use with drums, percussion, and instruments in the areas of live sound and live broadcast applications. With a smooth uniform response over a frequency range of 50 Hz –18 kHz, the ADX-90 is lightweight, compact, and extremely easy to use. The microphone is designed with an integral clamping system making it simple to attach to the rims of drums, percussion instruments, and a variety of other instruments such as sax, trumpet, and trombone. The ADX-90 has a cardioid pick-up pattern and is capable of handling sound pressure levels up to 135 dB. The flexible gooseneck, along with the 90-degree angle of the microphone head, puts the microphone in the proper position for placement directly over the sound source. Any final adjustments can be made by simply twisting or bending the gooseneck into the desired position. The ADX-90 is highly sensitive and will pick up the warmth and clarity of instruments without boominess. The ADX-90 operates on phantom power of 9-52 volts and is supplied with a phantom power adapter, integral clamp, cable, windscreen, and carrying pouch.
Drums
Percussion
specifications Transducer Type
Saxophone Condenser
(pre-polarized) Frequency Response Polar Pattern Output Impedance Open Circuit Sensitivity
50 Hz - 18 kHz Cardioid 250 Ohms 5 mV (ref 1k @ 1 Pascal)
Equivalent Noise Level Signal to Noise Ratio
29 dB (A weighted) 65 dB (ref 1k @ 1 Pascal)
Power Requirements Maximum SPL Cable/Connector
9 - 52v phantom 3 pin gold XLR connector Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing
g Drums and percussion g Saxophone, Trumpet, Trombone g Cymbals
135 dB plated male
Polarity
Trumpet
applications
Machined aluminum housing
Weight
6 oz / 170 grams
Finish
Black E-coat
features
Trombone
g Lightweight, compact, low profile g Simple to set-up and use g Can be used to mic multiple drums at one time g Can be utilitzed with wireless systems g Durable steel integral clamp g Fits into tight spaces (between drums, beneath cymbals) PERFORMANCE
IS
EVERYTHING
ADX-90
Supplied Accessories
10
Live Sound: Drums: The ADX-90 is designed to clip on the rim of a drum, to a drum suspension system, and on some types of stands. The position of the ADX-90 should be 2-3” off the drum head. It is not necessary or desirable to place the microphone too close to the drumhead.
0 -10
Frequency in Hertz
30Hz
Miking more than one drum with one mic: The ADX-90 has a wide cardioid pick-up pattern, which means that it is possible to use the mic to pick up multiple drums. For example: the mic could be placed between the snare and the high hat, effectively miking both instruments. The same could be done for two rack toms.
20kHz
Polar Chart The frequency response chart (above) and the polar patterns represent a typical production run for this microphone.
Under Cymbals: Use the ADX-90 to get into extremely tight spaces where dynamic microphones (like our D series) are too big. Miking the underside of a ride cymbal from the rim of a floor tom is simple and space efficient due to the vast adjustability of the ADX-90.
—1000 Hz
Too little rim: In cases where the rim height is too short for the clamp of the ADX-90, the innermost boot can be removed which will shorten the clamp. This is especially helpful if the drumhead is worn out, causing the rim to sit lower. Goodie Table: The ADX-90 can be placed on a cymbal stand over the table, or directly to a 9.5mm multi rod on the table.
Measurements (in Millimeters)
Percussion: The ADX-90’s integral clamp fits most standard (butcher-block) timbale and conga rims, but a separate stand may be needed to accommodate curved conga/bongo rims.
Wireless: The ADX-90 can be modified to be utilized with a wireless system. Depending on the brand of wireless and the connector configuration of the instrument body pack, the ADX-90 connector would need to be modified accordingly.
g APS-2 - 2 channel phantom power supply
Typical Frequency Response
Power Supply: The 9-52 volt phantom power adapter provided with the ADX-90 is a proprietary power supply. If you should lose your power supply, please contact Audix to order a replacement. (APS-90)
Brass: The ADX-90 can be used successfully for saxophone, trumpet, and trombone. Simply attach the clamp to the bottom part of the bell so that the mic is pointing in the direction of the bell. Do not try to force the mic inside the bell as the mic is designed to sound best if it is slightly off axis from the source. In the case of trumpet, this is ideal because the player can use a mute without having to remove the microphone.
Optional Accessories
g APS-90 power supply g External foam windscreen g Cordura carrying pouch.
Relative dB SPL
Operation and Maintenance: Condenser microphones as a general rule are much more sensitive and reactive than dynamic microphones and should be handled with care. Avoid extreme temperatures wherever possible. Moisture and high humidity can adversely effect the performance of the microphone and cause permanent damage. For outdoor use consider using the supplied outer foam windscreen to help reduce wind noise or popping. When not in use, please store your mic in the pouch provided at room temperature.
MINIATURE INSTRUMENT CONDENSER MICROPHONE
WARNING: The ADX-90 requires 9-52 Volts of phantom power to fully charge the element. For this reason, DO NOT PLUG OR UNPLUG THE MICROPHONE INTO OR OUT OF THE PA SYSTEM UNLESS THE VOLUME OF THE SYSTEM IS TURNED DOWN. Failure to do so may result in a loud “popping” noise sensation which could seriously damage the speakers in the PA system. Power requirements are 9-52 Volts Phantom Power. Most current mixing boards are equipped with phantom power, however, if phantom power is not available please use the Audix APS-2 power supply to interface between the microphone and the mixing board.
OUTPUT: The ADX-90 output is balanced across Pin 2 (positive) with respect to Pin 3. The shield is connected to Pin 1. It is recommended to use a high quality microphone cable with 3 pin XLR connectors.
SERVICE AND WARRANTY: This microphone is under warrantee for a period of 1 year from any and all manufacturing defects. Should your microphone fail in any way, please contact the Audix Service department at 503-682-6933. A Return Authorization number is required before sending back any products.
CALL: 503-682-6933 FAX: 503-682-7114 www.audixusa.com Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070. In Canada, Cabletek Electronics LTD, 604-942-1001 fax 604-942-1010 ® Audix Corporation 2000. All rights reserved. Audix and the Audix logo are trademarks of Audix Corporation. Specifications are subject to change without written notice.
PERFORMANCE
IS
EVERYTHING
