Preview only show first 10 pages with watermark. For full document please download

Ae-2s2 Wide-angle Loudspeaker System Spec Sheet

   EMBED


Share

Transcript

AE-3s2 Loudspeaker System Description: The AE-3s2 two-way, single-amped system produces high acoustic output from a small enclosure. A pair can cover large hotel ballrooms or auditoriums for speech reproduction; adding an optional subwoofer provides widerange music reproduction. Engineering Data: Driver Complement: Format: Low Frequency: One Apogee 10"(254mm) permanent magnet conetype driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters Single-amped/Two-way/Electronically-coupled High Frequency: One Apogee 1"(25mm) horn-loaded compression driver Frequency Response (1m on axis): Dispersion: H: 70° x V: 45° 70 Hz to 18 kHz ± 3 dB Max. SPL (@1m): Input Connectors: Neutrik™ NL4 MP Speakon™ connectors standard; Cannon EP series 121 dB cont./127 dB peak and gas-tight barrier strips optional PTML (peak transient mechanical limit): 138 dB Compatible Processors: DLC24 Digital Controller Sensitivity (1W @ 1m): Handles: Nominal Impedance: Two handles designed as an integral part of enclosure (no moving parts) 99.5 dB/200 Hz to 4 kHz 8 ohms Max. Power Handling: Grille: Powder-coated, diamond-punched steel with acoustic foam covering Rigging Hardware: Two 12-gauge steel nutplates, mounted one on either side, recessed, nominally flush; accepts 3/8"-16 thread, (10mm nutplate optional); nutplates are backed with 12-gauge steel internal brackets Finish: Textured high-strength black epoxy paint; other colors optional Enclosure Type: 20° trapezoidal, optimally-vented bass Cabinet Construction: Multi-ply birch with stainless steel fasteners 300W cont./1200W peak Dimensions: front: 12.5"(318mm) W x 16.25"(413mm) H rear: 10"(254mm) W x 16.25"(413mm) H depth: 10"(254mm) Weight: 36 lb. (16.4 kg) Polar Measurements AE-3s2 (6 dB/division, normalized) 0° 330° 60° 90° 270° 120° 240° 150° 0° 330° 30° 300° 60° 90° 270° 120° 240° 150° 210° 330° 30° 300° 300° 60° 90° 270° 120° 240° 150° 210° 210° 180° 180° 180° 62.5 Hz 125 Hz 250 Hz 330° 300° 60° 90° 330° 30° 270° 0dB/ DIV 0° 0° 0° 30° 10 dB/division 0° 30° Frequency Response AE-3s2 (with controller) 300° 60° 330° 30° 90° 270° 300° 60° 90° 270° 20 120° 240° 120° 240° 120° 50 100 200 500 1K 2K 5K 10K 20K 240° Hz (Frequency) 150° 150° 210° 150° 210° 210° 180° 180° 180° 500 Hz 1,000 Hz 2,000 Hz 0° 0° 0° 330° 30° 330° 30° Measured in a free-field anechoic environment using a swept one-third octave input. 330° 30° Processor Notes: 300° 60° 90° 270° 120° 240° 150° 210° 300° 60° 90° 270° 120° 240° 150° 210° 300° 60° 90° 270° 120° 240° 150° 210° 180° 180° 180° 4,000 Hz 8,000 Hz 16,000 Hz All polar measurements obtained in a freefield environment at 10° increments. The DLC24 Digital Loudspeaker Controller is a digital engine with an analog surface. It combines the most advanced technology available with intuitive interfaces to provide the key elements that ensure optimal loudspeaker system performance and management in a variety of live sound and fixed installation applications. The controller provides factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Dimensional Drawings AE-3s2 (dimensions in inches and millimeters) 50 Spring Street, Ramsey, NJ 07446, USA Tel: 800-443-3979• Fax: 800-999-9016 • www.apogee-sound.com Specifications subject to change without notice. 55-0017-01B ©2006 Bogen Communications, Inc. 06/12