Transcript
2 way HDMI splitter distributes 1 HDMI source to 2 HDMI displays simultaneously. It offers HD video distribution solutions for many applications such as hotels, bars, pubs, shops, conference rooms and many more.
Input Video Signal
0.5 -1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Max Single Link Range
1920x1200, 1080P
HDMI Resolutions:
480i/576i/480p/576p/720p/1080i/1080P/ 3D(1080P/24Hz)
DVI Resolutions
480p/576i/576p/720i/720p/1080i/1080p
HDMI Version
HDMI 1.3
Bandwidth
Up to 225MHz
EIDI Duration
4 seconds
Power supply
DC 5V/1A
Max. Cable length
10m with 28AWG cable; 15m with 26AWG cable
Front: 1. Power LED 2. Power Supply Socket 3. HDMI Input 4. LED of HDMI Input
1
2
5
www.sacelectronics.co.uk
2). Connect the DC 5V power supply provided into the splitter. Please note that a power supply with higher voltage may damage the splitter. 3). When the input and outputs are connected turn on, the corresponding LED will light.
4 5. HDMI 1 Output 6. LED of HDMI 1 Output 7. LED of HDMI 2 Output 8. HDMI 2 Output
6
1). Connect the HDMI input source and output devices into the HDMI Splitter. *please refer to the Connection Image.
AE0582
3
Back:
1X2 HDMI splitter: 1pcs Power supply: 1pcs User Manual: 1pcs
7
8
1). The splitter doesn’t appear to be functioning. Firstly, check if the LED’s are lit, ensure the power supply is in good condition and firmly connected. Secondly, make sure all cables are well connected, and are not damaged. Thirdly, make sure the length of the cables are within the MAX supported length of this splitter. Lastly, try to connect the input device directly to the display to see if it will display normally. 2). If the MAX. resolutions of the two displays are not the same, what resolution will be output? E.g. if the MAX resolutions of the two displays are 720P and 1080P, the splitters output resolution will be the lower, 720P to both displays.
DVD, STB, DVR, console, PC ETC
