Transcript
AFI-2s2 Contractor Series Loudspeaker System Description:
The AFI-2s2, with its carefully arranged woofers, extends vertical pattern control down to 500 Hz making it ideal for smaller spaces with poor acoustics. It is well suited for use as the main speaker in mid-sized houses of worship, auditoriums, and meeting rooms. With 120dB max SPL, the AFI-2s2 is powerful enough for bars and small clubs.
Engineering Data:
Driver Complement: Low Frequency: Dual Apogee 8"(203mm) permanent magnet conetype drivers are treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
Format: Passive/Two-way
Dispersion:
High Frequency: One Apogee 1.4" (35.6mm) voice coil, 1.0" (25.4mm) exit horn-loaded compression driver thermally cooled with Ferrofluid
H: 75° x V: 60° (rotatable)
Input Connectors:
Max. SPL (@1m):
Barrier strip, screw type #8
120 dB cont./126 dB peak
Compatible Processors:
PTML (peak transient mechanical limit):
AF I Main Frame Controller Chassis (using AF I-2 Module) or DLC24
135 dB
Handles:
Sensitivity (1W @ 1m):
Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
96 dB
Frequency Response (1m on axis): 66 Hz to 15.5 kHz ± 3 dB
Nominal Impedance:
Grille:
16 ohms
Highly durable, quality finish on perforated steel (aluminum on SX version)
Max. Power Handling:
Rigging Hardware:
Dimensions:
Yoke: Two rigging points, one on top and one on bottom, to accept a yoke; points are backed with 16-gauge steel and can be type 3/8" – 16 or M10 thread OmniMount®: Bolt pattern on back panel accepts 60.0 series mount
225W cont./900W peak front: 9.7"(247mm) W x 26.4"(671mm) H rear: 5.8"(148mm) W x 26.4"(671mm) H depth: 12.7"(323mm)
Weight:
Finish: Textured high-strength black or white epoxy paint; other colors optional
Enclosure Type: 20° trapezoidal, optimally-vented bass
Cabinet Construction: Multi-ply hardwood with stainless steel fasteners
Options/Accessories: • AF I Controller Processor or DLC24 Digital Processor • SX weather treatment for harsh environments • Assorted rigging components
36 lb. (16.3 kg)
Polar Measurements AFI-2s2 (6 dB/division, normalized) 0°
330°
30° 300°
60°
270°
90°
120°
240° 150°
180°
0°
300°
270°
120°
240° 150°
330°
90°
30°
270°
120°
240°
0°
120°
240°
180°
330°
30°
270°
120°
240°
180°
330°
30°
270°
120°
240° 210°
0°
330° 300°
270°
120°
240° 150°
180°
210°
Hz (Frequency) Measured in a free-field anechoic environment using a swept one-third octave input.
2,000 Hz 330°
30° 300°
270°
90°
120°
240°
180°
0°
90°
210°
60°
150°
210°
60°
1,000 Hz
90°
180°
270°
250 Hz
300°
150°
300°
4,000 Hz
300°
150°
90°
210°
60°
150°
0°
330°
90°
210°
60°
500 Hz 30°
180°
0°
60°
125 Hz
300°
180°
30°
90°
210°
60°
150°
330°
60°
63 Hz 30°
0°
12 dB/division
30°
Frequency Response AFI-2s2
210°
8,000 Hz
0°
Processor Notes:
330° 300°
60°
90°
270°
120°
240° 150°
180°
210°
16,000 Hz
All polar measurements obtained in a freefield environment at 10° increments.
The AFI Controller consists of an analog Main Frame which accepts four voicing modules. Modules are available for each of the different AFI loudspeaker types, with two module bays required for bi-amplified speakers. The DLC24 Digital Loudspeaker Controller is a digital engine with an analog surface. It combines the most advanced technology available with intuitive interfaces to provide the key elements that ensure optimal loudspeaker system performance and management in a variety of live sound and fixed installation applications. The controllers provide factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Barrier strip inputs and outputs are standard on the AFI Controller.
Dimensional Drawings AFI-2s2 (dimensions in inches and millimeters)
50 Spring Street, Ramsey, NJ 07446, USA Tel: 800-443-3979• Fax: 800-999-9016 • www.apogee-sound.com
Specifications subject to change without notice. 55-0063-01D
©2006 Bogen Communications, Inc. 0612
