Transcript
Technical Data Sheet
Power Source Afrox Industrial Multiprocess 175 Technical Specifications Item number Power voltage Frequency Rated input current
W035175 Single-phase 240 V ±15% 50/60 Hz 28 A
Output current MMA TIG MIG
20 to 175 A 10 to 175 A 50 to 175 A
Rated working voltage 16,5 to 22,8 V OCV 56 V Duty cycle 35% Wire feeder Internal Wire feeder speed 2 to 12 m/min Post flow time 3s Welding wire diameter 0,6/0,8/1,0 mm Remote control No Efficiency 80% Power factor 0,73 Insulation grade F Housing protection grade IP23S Welding thickness >0,8 mm Dimensions (L × W × H) 420 × 220 × 439 mm Weight 12,8 kg Standards IEC 60974.1 Features • Multifunctional display • MMA/Lift TIG/MIG • Wire speed • 2T/4T switch • Data selection • Arc welding adjustment mode • Inductance • Preset voltage and wire speed • Polarity selection
Applications • Light fabrication • Auto body repair • Rental shops • Maintenance repair • Farm repair work • Home/hobby • Motorsports
Product description Rated at 175 A, 35% duty cycle. The only all-in-one, portable, multiprocess power source from Afrox is our most versatile machine to date. Welds MMA, MIG and TIG. Supplied with MIG gun and TIG torch with regulator.
The information contained or otherwise referenced herein is presented only as typical without guarantee or warranty, and Afrox expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as recommended for any welding condition or technique not controlled by Afrox. For more information contact the Afrox Customer Service Centre, tel: 0860 020202 or e-mail:
[email protected], website: www.afrox.com
