Transcript
AG A1x/m1d
AMC Module
N - Series
GPGPU AMC Processor Module, up to Four Processors
APPLICATIONS AG A1x/m1d is a Full-size or Mid-size AdvancedMC™
primarily designed for use in AdvancedTCA® or MicroTCA™
processor module supporting up to four NVIDIA® Tegra® K1
open standards based systems and hence benefits from a
processors. Each Tegra K1 processor consists of quad-core
wide eco-system of complementary products like the
ARM® Cortex®-A15 CPUs and 192 NVIDIA Kepler™ CUDA® GPU
Concurrent Technologies AM C1x/msd 4th generation
cores which are linked together in the board to create a
Intel™ Core® based processor module. Typical applications
highly power efficient computing module that easily scales
for this type of embedded supercomputer include wireless
with Concurrent Technologies Fabric Interconnect
test equipment, radar, image processing, decryption and
Networking Software known as FIN-S. AG A1x/m1d is
other security related tasks
HIGHLIGHTS n Single Module, Full-size or Mid-size, AdvancedMC™ (AMC)
GPGPU multiple processor module: compliant to AMC.0 2 x processors on Mid-size module up to 4 x processors on Full-size module Each processor is an NVIDIA® Tegra® K1 System-on-Chip: 4 x ARM® Cortex®-A15 cores, 2.2 GHz 192 x Kepler™ CUDA® GPU cores, 933 MHz Up to 4 Gbytes of DDR3L-1600 DRAM per processor Up to 64 Gbytes of eMMC Flash per processor Dual x4 Serial RapidIO® fabric ports (Gen 2): AMC.4 Type 5 and Type 10 3 x Ethernet interfaces: AMC.2 Type E2 (2 x Gigabit interfaces, SerDes type) 1 x Gigabit interface via front panel
n n n n
n -
CONCURRENT TECHNOLOGIES
n 2 x Serial ATA interfaces (AMC.3 Type S2) n 1 x DisplayPort graphics and 1 x USB via front panel n Console interface (1 x USB) via front panel to all processors n Hot swap compliant:
- compliant to AMC.0 - IPMI Version 1.5 according to AMC.0 n Support for Linux® Operating System: - boots from eMMC Flash or via Ethernet
n IPMI (Intelligent Platform Management Interface):
n Support for NVIDIA CUDA 6 and OpenCV4 n Open MPI Ready, Open DDS Ready n Support for Fabric Interconnect Networking Software (FIN-S)
Concurrent Technologies Plc Concurrent Technologies Inc
4 Gilberd Court, Colchester, Essex, CO4 9WN, UK Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 6 Tower Office Park, Woburn, MA 01801, USA Tel: (781) 933 5900 Fax: (781) 933 5911 email:
[email protected]
http://www.gocct.com
Specification GPGPU AMC Processor Module n NVIDIA® Tegra® K1 CD575M System-on-Chip (SoC) processor: è 4 x ARM® Cortex®-A15 cores, 32-bit, 2.2 GHz è 192 x Kepler™ CUDA® GPU cores, 933 MHz n up to 64 Gbytes eMMC Flash storage per processor n 2 x processors on Mid-size Single Module n up to 4 x processors on Full-size Single Module n compliant to AMC.0
1 x Ethernet USB 2.0 10/100/1000 Mbps DisplayPort
USB to UART Bridge
DDR3
SPI
x4
eMMC
n up to 4 Gbytes of DDR3L-1600 DRAM per processor: è 64-bit data bus è peak bandwidth 12.8 GB/s n accessible from processor and AMC connector
x4
SPI
Boot Flash
NVIDIA Tegra K1
x4
eMMC
x4
x4 PCIe to SRIO Bridge
x1
DDR3
PICMGÒ AdvancedMC™ Interfaces
Mezzanine Connector
Boot Flash
NVIDIA Tegra K1
DRAM
n hot swap compliant to AMC.0 n each processor connects to an on-board Serial RapidIO® (SRIO) switch (IDT® 80HCPS1432) via an on-board SRIO interface implemented using a PCI Express® to SRIO bridge n dual x4 SRIO Gen 2 fabric connections in AMC fat pipes region (AMC.4 Type 5 and Type 10): è both connect to the on-board SRIO switch n build option for four x1 Serial RapidIO Gen 2 ports in AMC extended options region, e.g. use for mesh interconnect via backplane: è all four connect to the on-board SRIO switch n all SRIO interfaces connect to the on-board switch
USB 2.0 Console
Serial RapidIO (SRIO) Gen 2 Switch CPS-1432
Board Logic
Intel i210
x4
PCIe to SRIO Bridge
x1
x4 Board Logic
IPMI Micro
Triggers (Ports 17-20)
IPMB
2 x SerDes 1000BASE-BX (AMC.2 Type E2)
SATA300
x4
x1 x1 x1 x1
Mezzanine Connector
Ethernet Switch
Intel i210
Serial RapidIO Serial RapidIO (AMC.4 Type 5 (Ports 12-15) and Type 10)
SATA300
Main Board Block Diagram (supporting 2 processors)
Ethernet Interfaces SPI
DDR3
Boot Flash
x4
eMMC
PCIe to SRIO Bridge
USB Interface n 1 x USB 2.0 port via front panel
Graphics Interface n DisplayPort interface via front panel: è up to 1980 x 1080, 32-bit, 60Hz
Software Support n n n n
support for Linux® operating system support for nVIDIA CUDA 6 and OpenCV4 Open MPI Ready and Open DDS Ready support for Fabric Interconnect Networking Software (FIN-S)
x4
PCIe to SRIO Bridge
x4
Serial RapidIO
UART
Board Logic
Gigabit Ethernet
Serial RapidIO
Intel i210
UART
Gigabit Ethernet
Boot Flash
x1
Intel i210
Mezzanine Connector
Storage Interfaces
n USB console interface via front panel giving simultaneous access to all processors' consoles: è implemented by USB to quad UART bridge
eMMC
x4
x1
n build option for 4 x triggers (AMC Ports 17-20) n compatible with PICMG MTCA.4
Console Interface
SPI NVIDIA Tegra K1
Triggers
n two SATA300 interfaces in AMC common options region (AMC.3 Type S2): è derived from the two processors on the main board è used for data storage (not a bootable device)
DDR3
NVIDIA Tegra K1
DRAFT I
n each processor connects to an on-board Ethernet switch (Marvell® 88E6182) via an on-board SGMII interface implemented using an Intel® i210 Ethernet controller n dual SerDes interfaces in AMC common options region (AMC.2 Type E2): è supporting 1000BASE-BX è both connect to the on-board Ethernet switch n 1 x Gigabit Ethernet interface via front panel: è supporting 10/100/1000BASE-T è connects to the on-board Ethernet switch è all Ethernet interfaces connect to the on-board switch
Mezzanine Board Block Diagram (optional board supporting 2 additional processors)
Firmware Support
Electrical Specification (Estimated)
n Open Source U-Boot bootloader, boots the operating system from: è eMMC Flash è Ethernet interface
n typical current figures: è +12V @ 2.0A, voltage ±2V (2 x processors) è +12V @ 4.0A, voltage ±2V (4 x processors) è +3.3V @ less than 0.15A, voltage ±5%
Boot Flash Memory
Environmental Specification
n 8 Mbytes of Boot Flash Memory
n operating temperature: è 0°C to +55°C (N-Series) n non-operating temperature: è -40°C to +85°C n 5% to 95% Relative Humidity, non condensing (operating or non-operating)
IPMI n IPMI Version 1.5 according to AMC.0 n on-board BMC (Baseboard Management Controller) n supports 16 Kbytes of EEPROM
Safety n PCB (PWB) manufactured with flammability rating of UL94V-0
Mechanical Specification n AMC.0 Single Module form-factor n 180.6mm x 73.5mm (7.1 inches x 2.9 inches) n Full-size Module: 29mm (1.1 inches): è supports 2 or 4 processors n Mid-size Module: 19mm (0.75 inches): è supports 2 processors
ORDERING INFORMATION Order Number
Product Description (Hardware)
For the order number suffix (d-yz) options please contact your local sales office: where d = DRAM size where yz = SRIO, Triggers, eMMC Flash size
AG A1x/m1d-yz
GPGPU AMC Processor Module where x = number of processors (2 or 4) where m = Mid-size or Full-size Single Module
d = 2 or 4 Gbytes DRAM/processor
All companies and product names are trademarks of their respective organizations. Specification subject to change; E and OE.
yz = options for four x1 Serial RapidIO ports and four triggers plus up to 64 Gbytes eMMC Flash/processor Datasheet Code 1737/0215 © Concurrent Technologies 2015
