Ah04 Quick Installation Guide

Transcript

Quick Installation Guide AH02 / AH04 2-Port/4-Port Slim Palmtop USB KVM Switch For users who might need to use a hotkey preceding sequence other than two scroll locks, we also offer five key alternatives for free configuration. Quick Installation Guide INSTALLATION Take the KVM Switch out of the box and begin installation. Step 1. If your package comes with a power adapter, then first power up you KVM Switch by connecting the external power adapter to it. Note: This KVM Switch can feed on interface power coming from the computer USB interface , hence an external power adapter is not required if the power feed coming from the USB interface is sufficient. AH02 AH04 2-Port/4-Port Slim Palmtop USB KVM Switch AH02 /AH04 Thank you for purchasing the USB KVM Switch w/ True Transparent USB Emulation! With our highly reliable and quality product, users can enjoy countless benefits from using this KVM Switch. INTRODUCTION This AH02/AH04 is a 2-port/4-port USB KVM Switch that allows you to access, control, boot and reboot multiple USB-enabled computers using only one USB keyboard, mouse and monitor/Flat Panel Display. The AH02 / AH04 features the True Transparent USB (TTU) Emulation technology that can provide full compatibility to all USB HID devices, so that any advanced keyboards and mice can be fully supported. It is especially useful for those who are using very advanced keyboard and mouse for either gaming or critical application scenarios. The AH02 / AH04 supports all time DDC emulation so that it can guarantee a maximum compatibility with video requirements. It supports analog video up to 2048 x 1536. http://www.uniclass.com.tw Step 2. Connect the shared USB keyboard, mouse and monitor to the KVM switch. Step 3. Connect each of your computers to the KVM switch, using the VGA video cable and the USB (Type A-to-Type B) cable Step 4. (Now your KVM Switch should have been powered-up….) Power up the connected computers. After your computers are powered up, the keyboard and mouse will be recognized and now you can begin operating the KVM switch. Note that, if you are using any keyboard or mouse device that requires proprietary driver to support its full functionality, you should install its driver first on the connected computers. This KVM Switch with the True Transparent USB Emulation (TTU) Technology can only guarantee that it can fully emulate the connected keyboard and mouse, and cannot replace the role of the driver that should be installed on the connected computers. Therefore, please install your driver for keyboard or mouse as it is required before this KVM switch can work wonder for you. OPERATION There are two methods to control your KVM Switch: using (1) the front-panel buttons or (2) keyboard hotkeys (1) Front- panel buttons The front-panel buttons let you have direct control over KVM switch operation and port switching. Simply press the button for port switching. (2) Keyboard hotkey A keyboard hotkey sequence consists of at least three specific keystrokes: See Quick Reference Sheet Hotkey preceding sequence configuration: For users who want to use a preceding sequence other than two consecutive Caps Locks, there is also one convenient way to configure it. (1)Hit Caps Lock +Caps Lock + H, then two beeps will signal readiness for new preceding sequence selection [or Press and hold down the last front-panel button (Button 2 or Button 4) until you hear two beeps, then release the button.] (2) Select and press the key you would like to use as your preceding sequence (SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, Left Ctrl ,and Right Ctrl keys are available for selection) and you’ll hear a beep for selection confirmation. Now you can use the new preceding sequence to execute your hotkey commands. Each keystroke within a hotkey sequence should be pressed within 2 seconds. Otherwise, the hotkey sequence will not be validated. For detailed Hotkey sequences and their corresponding functional commands, please refer to the Quick reference sheet. A virtual copy of exact keyboard mouse identity is emulated. Real keyboard and mouse are here. Reminder: Keyboard and mouse drivers should be installed if necessary for full functionality. A virtual copy of exact keyboard mouse identity is emulated. True Transparent USB (TTU) Emulation Technology: A virtual copy of exact keyboard and mouse identity is resident on the KVM switch for True Emulation to guarantee full compatibility with any advanced keyboard and mouse that require proprietary driver support for full functionality!!! Configuration Diagram (showing only AH02) Quick Installation Guide AH02 / AH04 2-Port/4-Port Slim Palmtop USB KVM Switch Quick Command Hotkeys Reference 1 Sheet Front-panel Buttons Description Press the corresponding button to select the active PC port Select PC Port ScrLK + ScrLK + (1~2 / 1~4) Next lower PC port ScrLK + ScrLK + [Up Arrow] -- Next lower PC port Next higher PC port ScrLK + ScrLK + [Down Arrow] -- Next higher PC port Previous PC port ScrLK + ScrLK + [Backspace] -- Previous PC port Beeper Sound On/Off ScrLK + ScrLK + B -- Toggle Beeper On/Off Press and hold down last button (Button 2 / Butotn4) till two beeps, release the button, then press [SCROLL LOCK, CAPS, ESC, F12,NUM LOCK, Left Ctrl ,or Right Ctrl] key Select PC port (1~2/1~4) Define Hotkey Preceding Sequence ScrLK + ScrLK + H + [SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, Left Ctrl,or Right Ctrl] Autoscan ScrLK + ScrLK + S -- Start Autoscan Autoscan with Programmable Delay Time ScrLK + ScrLK + S + 0~9 1  10” ; 2  20” ; 3  30” ; 4  40” ; 5  50” 6  60” ; 7  70” ; 8  80” ; 9  90” ; 0  100” -- Autoscan duration adjust to (10 ~ 100 seconds) Stop Autoscan [Anykey] Monitor Reset ScrLK + ScrLK + M Press any button Select hotkey header Stop Autoscan during scan mode -- Reset monitor Notes: 1. The keyboard hotkeys allows you a faster and broader control for your KVM switching operation in addition to the front-panel buttons. If you have configured a hotkey preceding sequence other than two consecutive scroll locks, you should change your hotkey sequence accordingly. RoHS Compliant http://www.uniclass.com.tw Rev.1.4 Copyright© All rights reserved.