Transcript
88 5660 91
Bali Hai Potting Bench IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Part List A. Top 1 pc
G. Side Frame 1 pc
B. Shelf 1 pc C. Base Frame 1 pc
I. Handle 4 pcs
D. Stretcher 2 pcs E. Stretcher 2 pcs
H. Side Frame 1 pc
J. Bar 2 pcs
L. Drawer 2 pcs
K. Rack 1 pc
F. Middle Frame 1 pc
(Knock-Down Construction, please rever to the last pages of these instruction for steps to assemble Rack (K) and Drawer (L).
Hardware List Small Hex Wrench 1 pc
Hey Wrench 1 pc
Assembly Screw 12 pcs.(+1 extra)
Head Cap Bolt 14 pcs.(+1 extra)
Caster 2 Locking 2 Non Lock 4 pcs
Wood Screw Wood Screw (8 X 1 1/2”) (6 X 1”) 24 pcs.(+1 extra) 4 pcs.(+1 extra)
Hanger 6 pcs.
Shelf Pin 4 pcs.(+1 extra)
Wood Screw (8 X 1 1/4”) 12 pcs.(+1 extra)
Wood Plug 6 pcs.(+1 extra)
Wood Screw (8 X 1”) 6 pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Assembly Instructions 2/6 IMPORTANT
* Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor.
STEP 1
D
Attach Stretchers (D), (E) to Middle Frame (F) with Wood Screws (8 X 1 1/4”).
D F E
E
Wood Screw (8 x 1 1/4”)
Hanger
STEP 2
I
Insert Bar (J) into Handles (I).
J
Attach unit to Side Frame (G) with Head Cap Bolts. Attach Hangers to Side Frame (G) with Head Cap Bolts. Repeat these steps to Side Frame (H).
G
Head Cap Bolt
I J
B
H Hanger
Assembly Instructions 3/6 STEP 3 Attach unit from Step 1 and Base Frame (C) to Side Frame (G) with Assembly Screws. Attach Side Frame (H) to unit with Assembly Screws.
Assembly Screw
Insert Caster into bottom of Legs (G), (H).
G Locking Casters
C
Non Locking Casters
STEP 4 Attach Rack (K) to Top (A) with Wood Screws (8 X 1 ½”).
K J B
A Wood Screw ( 8 X 1 1/2” )
H
Assembly Instructions 4/6 STEP 5 Attach top unit to base unit with Wood Screws (8 X 1 1/4)”.
Wood Screw (8 X 1 1/4”)
STEP 6
B
Insert Shelf Pins into side frames. Place Shelves (B) into position.
Shelf Pin
Wood plug
J B STEP 7 Slide Drawers (L) into Position. Insert Wood Plugs into unit.
L L
Assembly Instructions 5/6
Rack (K)
Wood Screw (8 X 1”)
K5
K1 K4 K3 K4
K2
STEP 1 Attach K4 to K1, K3 and K4. Attach K5 to unit with Wood Screws (8 X 1”) using a Phillips screwdriver.
L J B
Hardware List
K1 Side Part 1 pc
L2 Middle Part 1 pc
L3 Side Part 1 pc
L4 Shelf 2 pcs
L5 Top 1 pc
Assembly Instructions 6/6
STEP 1 Attach L1,L2 and L5 to L3 with Wood Screws (6 x 1”).
L3
L2 Wood Srew (6 X 1“) L5 L4 L4 L1
STEP 2 Attach L4 to unit with Wood Screws (6 X 1”).
L J B
Hardware List
L1 Front Part 1 pc
L2 Back Part 1 pc
L3 Side Part 1 pc
L4 Side Part 1 pc
L5 Base Part 1 pc
