Preview only show first 10 pages with watermark. For full document please download

Air Cooled Condensing Units

   EMBED


Share

Transcript

Project ________________________________ ™ Cleveland Item __________________________________ Quantity _______________________________ FCSI Section ____________________________ COOK CHILL SYSTEMS AIR COOLED CONDENSING UNITS Approval _______________________________ Cook/Chill Systems MODELS:  T-075M8  T-100M8  BLV-1500C6  BLV-2000C6 Date __________________________________  BLV-2500C6  BLV-3000C6  BLV-3500C6  BLV-4000C6  JLD-5000C6  JLD-6000C6  JLD-7000C6  JLD-8000C6 Cleveland Standard Features I Air cooled condensing unit for outdoor installation I For operation with R-22, 404A or R507 refrigerant (please specify) I Liquid line filter with replaceable core and sight glass I High efficiency Copeland discus compressor I Galvalume weather housing with raised base compressor I Thermally protected I Permanently lubricated condenser fan motor(s) I Access panels for easy servicing of internal components I Electrical controls are mounted in control box with hinged door I Receivers include service valves I Suction and discharge vibration eliminators I 180 lbs. head pressure valve I Crankcase heater for cold temperature operation I Suction filter with replaceable core I Suction accumulator Short Form Specifications I Oil separator I Low ambient kit I Anti short cycle timer I Liquid line solenoid valve (shipped loose) I Dry contacts for compressor alarm I Accepted for use in U.S.D.A. Inspected Facilities Shall be CLEVELAND, Model _____________ , Outdoor, ____ HP, AIR COOLED CONDENSING UNIT for Ice Builder. Weather housing with raised Base Compressor; Receiver with Discharge and Suction Line Vibration eliminators; Pressure Control; Drier//Sight Glass Kit; Liquid Line Solenoid Valve; replaceable Core Suction Line Filter, Suction Line Accumulator; Oil Separator and Oil Failure Safety Control; Head Pressure Control Valve; Control Panel with hinged door housing Low Ambient Kit, Compressor Contactor, and Control Circuit Fusing. Options & Accessories Ë Water Cooled Condensing Units Ë Larger models available upon request Ë Extended four (4) year compressor warranty (domestic only) Ë Ice Water Control Panel for location in production area Ë Ice Builders SECT. 1333 East 179 St., Tel: 1-216-481-4900 Web Site: www.ClevelandRange.com Cleveland, Ohio, U.S.A. 44110 Fax: 1-216-481-3782 Email: [email protected] XIV 49 PAGE 0308 MINIMUM CLEARANCE FRONT SIDE REAR 24" MIN 24" MIN 24" MIN 35 3/8" PLAN VIEW FUSED DISCONNECT SWITCH A 39 1/8" REAR VIEW KNOCKOUTS FOR ELECTRICAL CONNECTIONS 55 5/8" LIQUID LINE SUCTION LINE KNOCKOUTS FOR ELECTRICAL CONNECTIONS SIDE VIEW 44 1/2" PLAN VIEW SUCTION LINE B LIQUID LINE REAR VIEW C T-075M8 thru T-100M8 BLV-1500C6 thru BLV-4000C6 KNOCKOUTS FOR 87 ELECTRICAL CONNECTIONS 55 5/8" JLD units have two (2) compressors and are not supplied with fused disconnects. 1/16" PLAN VIEW SUCTION LINE REAR VIEW DIMENSIONS CONDENSING UNIT MODEL T-075M8 T-100M8 BLV-1500C6 BLV-2000C6 BLV-2500C6 BLV-3000C6 BLV-3500C6 BLV-4000C6 JLD-5000C6 JLD-6000C6 JLD-7000C6 JLD-8000C6 D ICE BUILDER MODEL IBC-50 IBC-75 IBC-100 IBC-125 IBC-150 IBC-175 IBC-200 IBC-250 IBC-300 IBC-350 IBC-400 IBC-450 & 500 UTILITY CONNECTIONS CONDENSING RECEIVER UNIT CAPACITY MODEL LBS T-075M8 162 T-100M8 227 BLV-1500C6 274 BLV-2000C6 615 BLV-2500C6 615 BLV-3000C6 615 BLV-3500C6 615 BLV-4000C6 615 JLD-5000C6 (2) 369 JLD-6000C6 (2) 369 JLD-7000C6 (2) 615 JLD-8000C6 (2) 615 LIQUID LINE 1/2" 7/8" 7/8" 7/8" 1 1/8" 1 1/8" 1 1/8" 1 1/8" 1 1/8" 1 1/8" 1 1/8" 1 1/8" LIQUID LINE JLD-5000C6 thru JLD-8000C6 A 67 3/4" 67 3/4" - SUCTION LINE 1 1/8" 1 3/8" 1 5/8" 1 5/8" 2 1/8" 2 1/8" 2 1/8" 2 1/8" 2 1/8" 2 1/8" 2 1/8" 2 1/8" B 170 3/4" 170 3/4" 225 3/4" 225 3/4" - REFRIGERANT NOT SUPPLIED BY CLEVELAND RANGE. AIR COOLED CONDENSING UNITS ARE FOR OUTDOOR INSTALLATION. WATER COOLED CONDENSING UNITS ARE FOR INDOOR INSTALLATION. Cleveland Range reserves right of design improvement or modification, as warranted. C 225 3/4" 225 3/4" - D 226" 226" 226" 226" ELECTRICAL 208 / 3PH SHIPPING WEIGHTS LBS / KG 1,140 / 517 1,330 / 603 1,900 / 862 1,980 / 898 2,170 / 984 2,260 / 1,028 2,760 / 1,025 2,860 / 1,297 4,060 / 1,842 4,520 / 2,050 5,520 / 2,504 5,720 / 2,595 COMPRESSOR CONDENSER RATED FAN MOTOR LOAD AMPS QTY 28.3 2 39.1 2 59.9 2 66 2 82.8 2 94 2 107 3 142 3 * 82.2 4 * 94 4 * 107 4 * 142 4 *PER COMPRESSOR TOTAL AMP LOAD 38.1 54.3 82.5 90.5 116.8 131.5 154.8 198.5 201.0 216.0 256.0 326.0 XIV 50 (NOT TO SCALE) SECT. PAGE 0308 Litho in USA