Transcript
5F InnoValley E Bldg., 255 Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea (Zip 463-400) T 031 8018 7333 F 031 8018 7330
User Manual
airDAC AD200
141x141x35 mm (WxDxH) 350 g
Function Buttons F1/F2/F3
LED Indicators LED1/LED2/LED3
Headphone Amp Output
Front-side
Power and Volume Knob
Optical Digital Output USB Input
RCA Analog Output Back-side
40-pin Extension
DC Power Supply
Back-side
Wi-Fi Antenna
airDAC AD200 Components •
airDAC AD200
•
Wi-Fi Antenna
•
DC power supply + power cable
Applications airDAC play
airDAC control - Both on IOS, Android market * Any other application supporting DLNA could be used
etc. USB Cable (mini usb B type 5 pin) *usb cable does not included in airDAC AD200 pakage
airDAC AD200 Listen DETAILSTM RADSONE airDAC is a Hi-Fi DAC with Headphone Amplifier to play unlimited lossless sound sources from wireless or wired inputs. All Hi-Fi sound sources from local PCs, smartphones, and music streaming servers are reproduced through topgrade headphone/digital/analog outputs with Distinctive Clear TechnololgyTM algorithm. Enjoy digital-artifact-free genuine sound and listen every details of your music.
High End Wi-Fi/USB DAC with top grade Headphone Amplifier
Features •
Wired or Wireless (input: USB, Wi-Fi)
•
DDC or DAC (output: Digital, Analog, Headphone)
•
High resolution audio 24-bit 192kHz PCM, DSD
•
Smartpnhone/tablet apps for remote device control
•
World first HRA streaming device through Bugs music
Technical Highlights •
Top-grade H/P driving with zero output impedance
•
Analog attenuator with range 95.5 dB
•
Zero ppm precision clock generator for whole blocks
•
Precision power management by ultra low noise LDOs
•
Industry proven adaptive dithering technology DCT
Components •
airDAC AD200
•
Wi-Fi Antenna
•
DC power supply + power cable
airDAC AD200 Specifications Input • Wi-Fi - DLNA 1.5 & UPnP AV1.0 - Format: FLAC, WAV, Apple lossless, AIFF, AAC, MP3, WMA, OGG • USB - USB1.1/USB2.0 Up to 24-bit 96kHz PCM (Windows) Up to 24-bit 192kHz PCM (OSX) DSD64/128 (DoP v1.1, OSX) Output • RCA / Headphone - THD+N 0.001% (-99.2 dB), SNR 110 dB @ 4.61 Vrms - THD+N 1%, SNR 116 dB @ 9.22 Vrms - THD+N 10%, SNR 117 dB @ 10.23 Vrms • Optical - SPIDF up to 24-bit 192 kHz Power • DC Adaptor - Input Voltage: AC 100~240V, 50-60Hz, 3A - DC Output: 18V 3A Dimension • 141x141x35 mm (WxDxH) • 350 g
1. HOW TO USE 1. Functions and Status Indications Power • On: Push volume knob shortly • Off: Push and hold volume knob Input Mode Selection • F1 Key - Wi-Fi: LED1 GREEN (LED1 ORANGE: SoftAP mode) - USB: LED1 RED * LED is blinking at streaming Output Mode Selection • F2 Key - RCA Line Out: LED2 GREEN - Headphone: LED2 RED - Optical: LED2 ORANGE Sound Mode Selection • F3 Key - DCT Speaker: LED3 RED - DCT Headphone: LED3 ORANGE - DCT Off: LED3 GREEN Network Connection (after Wi-Fi boot-up) • Press and hold F2 over 3 sec:
SoftAP Mode (LED1 ORANGE) • Press and hold F3 over 3 sec:
WPS Mode
(LED1/2/3 sequentially blinking with GREEN) Network Status Check (LED1)* 1. 2. 3. 4.
Wi-Fi Booting: RED/GREEN alternately blinking Wi-Fi Disconnected: GREEN quickly blinking Wi-Fi Connected : GREEN on Wi-Fi Streaming GREEN slowly blinking * Available only in Wi-Fi mode
2. Connection Setup 2. Network Connection (Firstly, Wi-Fi antenna should be mounted on the back panel of AD200) 2.1 Using WPS Mode WPS(Wi-Fi Protected Setup)? Setting the security and wireless connection between Wi-Fi devices at a time
by pushing WPS button Entry to WPS Mode
After Wi-Fi Booting status (about 40 sec after power on) Press and hold F3 over 3 sec. (LED1/2/3 sequentially blinking with GREEN)
Connect airDAC to Wi-Fi AP(Access Point) • Entry to WPS mode • Press WPS button on your AP
(Please check if WPS function is activated on your AP) • Check connection success (LED1 GREEN on, about 60 sec after pushing WPS button) • If the connection fails, SoftAP mode is started automatically * Once the connection succeeds, airDAC try to connect the existing network after power on
2. Connection Setup 2.2 Using SoftAP Mode SoftAP? airDAC itself functions like an AP in SoftAP •Play through the direct connection b/w smartphone and airDAC •Support searching and connecting to nearby APs Entry into SoftAP Mode After Wi-Fi Booting status (about 40 sec after power on) at Wi-Fi input mode Press and hold F2 over 3 sec (LED1 ORANGE on)
Searching and Connecting to Nearby Aps 1. Entry to SoftAP mode 2. Connect your smartphone to airDAC by searching Wi-Fi signal
(SSID: airDAC AD200, PW: password)
2. Connection Setup 3. Connect airDAC to nearby APs using airDAC play app. ✓Settings> Device Setup > airDAC AD200 > WiFi Network Selection
✓Choose your AP and Connect to it 4. Check connection success (LED1 GREEN on, wait for a while)
3. Music Play 3. Streaming your music source • USB (Full-speed)
1. Connect airDAC to PC/MAC with USB cable
2. Select audio output of PC/MAC to ‘airDAC AD200 FS’
- USB default mode is Full-speed.
- It support up tp 24 bit 96 kHz PCM.
- This mode is for Windows user.
3. Play music source with your preferred player (ex. foobar, JRiver and etc)
3. Music Play 3. Streaming your music source • USB (High-speed)
1. Connect airDAC to PC/MAC with USB cable
2. Connect to your airDAC with airDAC control app. (Please refer to section 2)
3. Select Mac in Setup USB Connection menu
- USB wil be reset and connected as High-speed mode.
3. Music Play • USB (Full-speed)
4. Select audio output of PC/MAC to ‘airDAC AD200 HS’
- This mode is for Mac user
- It support up tp 24 bit 192 kHz PCM
- Caution:
24 bit 352800Hz mode is only activated in DSD128 mode In PCM play, no sound will be played
•
3. Play music source with your preferred player (ex. audirvana, JRiver and etc)
3. Music Play
• Wi-Fi
1. Connect airDAC to nearby APs by WPS/SoftAP mode (please refer to section 2)
2. Connect your smartphone to the same AP
3. Play source using airDAC play app. (or any app. supporting DLNA)
- Play to > Devices > airDAC AD200
- Select music at Browser section
3. Music Play
• Direct streaming at SoftAP Mode
1. Connect your smartphone to airDAC directly through SoftAP mode
2. Play source using airDAC play app. (or any app. supporting DLNA)
- Play to > Devices > airDAC AD200
- Select music at Browser section
4. Firmware Update 4. Firware Update • airDAC control?
- Mobile application to monitor and control airDAC through Wi-Fi
- Available both iOS and Android market.
• How to Update
1. Connect airDAC to nearby APs by WPS/SoftAP mode (please refer to section 2)
2. Connect your smartphone to the same AP
3. Run airDAC control app.
4. Search your airDAC
4. Firmware Update • How to Update?
5. Select version menu on right bottom and push ‘Firmware Update’ button
(The menu is activated only airDAC device is connected through Wi-Fi)
6. If any update is available, ‘New Firmware Found’ alert will let you know.
(Music play will be stoped) • 7. Select OK, then downloading will be started. •
4. Firmware Update • How to Update?
8. After downloading is finished, confirm firware update by selecting OK.
Firmware updating process will be started. All LEDs on your airDAC device will be blinking with RED color.
•
9. If all update process is finished, airDAC will reboot automatically. •
Wiring Guide #1
F2 Button LED2 RED
Wiring Guide #2
F2 Button LED2 GREEN
Wiring Guide #3
F2 Button LED2 GREEN
Wiring Guide #4
F2 Button LED2 ORANGE
