Aisi316l Stainless Steel Construction For Use In Highly

Transcript

AISI316L Stainless Steel construction For use in highly corrosive environments Maximum Load 25 kg Variable speed Weatherproof standard IP67 Pre-set positioning fitted as standard VSPT250-T Pan & Tilt units have been developed for use in the Offshore, Marine and Industrial installations and in general where corrosive agents can cause a rapid deterioration of a standard aluminum-steel unit. The VSPT250-T Pan & Tilt Unit comprises a ’T’ body with three end covers. The 'T' body encapsulates the Pan and Tilt Drive Motors together with control and interconnection PCB. Two end covers are equipped with a pass through axis to accommodate the Pan and Tilt motor shafts. The third end cover provides access for cable entry. VSPT250-T Stainless Steel Pan&Tilt Unit (with side bracket) The unit is capable of handling loads of up to 25 kg and features electronically adjusted limits set via RX250DC telemetry receiver (optional) and rugged high torque motors to ensure long operational life. Potentiometers on both axis allow the pre-set positioning of the unit. VSPT250-T Series is suitable for 101, 129 and 168 camera housings. Mounting brackets are available manufactured in AISI316L Stainless Steel. VSPT250-T+129SH Pan & Tilt Unit with 129SH housing Issue 20130703 GENERAL & MECHANICAL MODELS VSPT250-T VSPT250-T AC (BOTH VARIABLE AND FIXED SPEED VERSIONS) P&T unit, variable speed motors P&T unit with AC controls, fixed speed GENERAL & MECHANICAL (VARIABLE SPEED VERSION) Construction: Finish: Operating Temperature: Dimensions: AISI316L Stainless Steel Electro-polished -20° +55°C (-4° +131° F) See drawings next page Pan Angle: Pan Speed: Pan Torque: 360° Max (+/- 180°) 0 – 18°/second 80 Nm Tilt Angle: Tilt Speed: Tilt Torque: 180° Max (+/- 90°) 0 – 9,5°/second 107 Nm Backlash: <0.1° Maximum load: 25 kg Weight: 16,5 kg GENERAL & MECHANICAL Mounting: 4xM8 on 101.6 mm PCD Rotation Angle: Electronically set via RX250DC telemetry receiver available as optional. Upon request, manual rotation angle setting is available. Cable entries: 2 M20x1,5 nickel plated brass cable glands (included). Standard cable diameter 6-10mm. Different cable entries are available to meet every installation requirement. CERTIFICATION Weatherproof standard: IP67 CE Compliant ELECTRICAL Supply voltage: Variable speed: 24 VAC or 24 VDC using RX250DC integrated telemetry receiver (not included) Fixed speed: 24 VAC or 230 VAC Power consumption: 80 W Max Motors: 24 VDC (FIXED SPEED VERSION) MOUNTING ACCESSORIES Construction: Finish: Operating Temperature: Dimensions: SSBK250 AISI316L Stainless Steel Electro-polished -20° +55°C (-4° +131° F) See drawings next page Pan Angle: Pan Speed: Pan Torque: 360° Max (+/- 180°) 6°/second 30 Nm Tilt Angle: Tilt Speed: Tilt Torque: 180° Max (+/- 90°) 3°/second 60 Nm Backlash: <0.1° Maximum load: 25 kg Weight: 18 kg SSPM250 AISI316L Stainless mounting bracket AISI316L Stainless mount adapter Steel wall Steel pole SUITABLE CAMERA HOUSINGS 101 Series 129 Series 168 Series compact stainless steel camera housings medium stainless steel camera housings medium-large stainless steel camera housings See the products datasheet for more information CUSTOMISATION OPTIONS A full range of customisation is possible: – – – different camera housing with different accessories; externally adjustable mechanical end-stop limits; fixed speed motors. Contact us for further information SIDE VIEW FRONTAL VIEW BOTTOM VIEW TECNOVIDEO S.r.l. - Via San L. Murialdo, 8 – 36030 Villaverla (VI) ITALY Tel. +39.0445.350444 Fax +39.0445.357259 – e-mail: [email protected] – www.tecnovideocctv.com