Preview only show first 10 pages with watermark. For full document please download

Aivion Tl 6010

   EMBED


Share

Transcript

TL6010 Datasheet - Extended DVI Output Video Transceiver Thunder Link is a family of small form factor modules for formatting and converting generic digital video streams to standard compliant formats. Different interface standards are supported from the transmitter side including DVI/HDMI, VGA, HD-SDI, SDI and USB. The modules connect to the digital video interface of Sony’s FCB-H, FCB-EH and FCB-EX-E block cameras and support several progressive and interlace HDTV or SDTV formats. As no analog to digital conversion is done on these modules, best output image quality is guaranteed. TL6010 - Features + DVI compliant digital video output (HDTV over DVI) + Connects to HD video monitors and common PC monitors + Supports Sony FCB-H11 and H10 camera blocks + Digital LVDS video input from camera + Automatic input standard detection + 1080i/p/50Hz, 1080i/p/59.94Hz, 720p/50Hz and 720p/59.94Hz outputs + Selectable progressive or interlace output for 1080 standards + Full digital signal processing chain for best image quality + DVI-I output - analog HDTV YPrPb on analog pins of DVI connector + Pass through connector for camera power + RS232 serial control interface 1080p/50 1080p/59.94 Output + Single power input for camera and module + Power requirements: 7V to 12V DC regulated + Tiny module size 44mm x 42mm (width x height) + DVI cable length up to 10m * + Tiny module size 44mm x 42mm FCB-H11/H10CameraIF Block Diagram TL6010 10pin Micro Coax Conn. LVDSVideo Order Codes: Serial TTLControl 24pin FFC Conn. TL6010 CameraReset H11 DVI output Power VIDEO PROCESSOR DVI Tx Onboard Power DVI CONNECTOR TL6010CK Cable Kit for FCB-H11/H10 solution CVBS* out External Power 8pin RS232 JST / TTL SH 1080Output Mode Conn. 1080 Output Mode RS232Control IF Preliminary Data *DVI cable length depends on cable type, HDTV output standard and receiver capabilities A1_DS_TL6010_V.1.0.0.fm May, 23rd, 2011 W W W. S T E M M E RI M AG I N G.COM 1 TL6010 Datasheet - Extended DVI Output Video Transceiver Specification Camera Interface Onboard Connectors INPUTS: DATA CLOCK CONTROL Rx ANALOG LVDS digital video (from camera) LVDS (from camera) 3.3V TTL serial control interface YPbPr and CVBS video 1Vpp into 75 ohms OUTPUTS: CONTROL Tx RESET 3.3V TTL serial control interface 3.3V TTL, active low, for FCB-H11 only PCB Bottom Side: LVDS Video Input J3 FFC Camera IF J1 Power and Environment POWER INPUT: 7V TO 12V DC regulated Power consumption (FCB-H11 + TL6010) 6 W (cam motors inactive) Power consumption TL6010: 350mA @ 12V DC (max.) Power consumption value conditions: Power input 12V DC Ambient temperature +25°C/77°F Humidity 30% Note: Red arrowheads indicate pin 1 location OPERATING CONDITIONS (TL6010): Ambient Temperature (min/max): -5°C/+60°C = 23°F/140°F Humidity: 20%-80% Board Mechanical (blue = PCB mounting holes, red = Panel cut-out holes location) Maximum top component height = 13.5mm (DVI connector) 42 mm 33 mm JST BM08B-SSRS-TB External Interface Connector 1 2 3 4 5 6 7 STORAGE CONDITIONS (TL6010): Temperature (min/max): -20°C/+60°C = -4°F/140°F Humidity: 20%-80% TOP VIEW J2 DC IN DC IN GND RXD_232 (serial IF receive, RS232 level) TXD_232 (serial IF transmit, RS232 level) GND 1080 mode select (internal pullup to 3.3V) 8 CVBS1 video out 1080 Mode Select Function (Pin7 of J2) Camera must be set to 1080i mode Open or 3.3V Output is 1080p Pulled to GND (0V) Output is 1080i Maximum bottom component height = 5mm This pin has no function when camera is set to 720p. PCB thickness = 1.62mm SAFETY NOTES: 1. Camera must be set to PAL or NTSC mode 11,75 mm 3 mm 5 mm 5,845 mm DVI Output Connector Type is JAE DV2R029U13 E 6,5 mm 10 mm 34 mm FFC with contacts on OPPOSITE side MUST be used when connecting J1 of TL6010 to the camera. All digital inputs are specified for maximum voltages of 3.3V (+5%). 38,355 mm 44 mm Preliminary Data W W W. S T E M M E R- I M A G I N G . C O M . I M A G I N G I S O U R PA S S I O N UNITED KINGDOM IRELAND Phone: +44 1252 780000 [email protected] Internet: E-Mail: FRANCE www.aivion.com Phone: +33 1 45069560 [email protected] [email protected] THE NETHERLANDS B E LG I U M . L U X E M B O U R G Phone: +31 575 495159 2 [email protected] A1_DS_TL6010_V.1.0.0.fm © 2008-2011 Visual Communication Systems GmbH, all rights reserved. FG-AIVO11-06/2013 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document. J2 Power, Control, Mode_1080, CVBS out