Preview only show first 10 pages with watermark. For full document please download

Alb-4504vps-28vdc 4-ch Power Supply Passive Video Receiver

   EMBED


Share

Transcript

www.buildingsecurity.com.sg Model : ALB-4504VPS-28VDC 4-CH Power Supply Passive Video Receiver Hub Features • Provides camera power while receiving video transmission both over a single 4-pair UTP cat5e/6 cable • Color video up to 300m via UTP cat5e/6 • Power camera; Max 1A per channel • Transmit DC 28V power up to 300m working with ALB-4301VPS (transmitter, DC 12V regulator) for DC 12V camera • Female BNC connector and RJ45 Jack • NTSC, PAL & SECAM video format compatible; • Real-time transmission; • Exceptional interference rejection; • Built-in TVS for surge protection & ground loop isolation • Lightning protection design Grade: Ⅲ • Wave Filter Design, Anti-Static Design • Black galvanized housing • Rack, wall mountable and desk installation with 4 rubber feet Overview Alstron ALB-4504VPS is a 4 channel video and power hybrid receiver that consolidates all CCTV system cabling using standard EIA/TIA 568A/B structured building wiring. 1 www.buildingsecurity.com.sg Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, ALB4504VPS allows the real time transmission of CCTV video signal via cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported. Working with ALB-4301VPS(converter DC 28~36V into regulated DC 12V), it can transmit the camera video and power hybrid signal up to 300m for DC 12V output camera. The superior interference rejection and low emissions of the ALB-4504VPS allows video and power signals to co-exist in various environment. Compared with traditional video receiver, ALB-4504VPS greatly reduces the cost and improves the performance. Compared with other similar products, Alstron ALB-4504VPS has higher performance, better stability, and more obvious price advantage. Wire and Cable Recommendations ALB-4504VPS is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG. Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair. For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance. 2 www.buildingsecurity.com.sg 1 2 3 4 5 6 7 8 T568A: White Green Green White Orange Blue White Blue Orange White Brown Brown T568B: White Orange Orange White Green Blue White Blue Green White Brown Brown Specification Product Name  4-Channel Power Supply Passive Video Receiver Hub  Applied Devices CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment Video  Video Format PAL, NTSC, SECAM  Operating Frequency Max Distance Common-mode / Differential-mode rejection DC to 5 MHz  UTP Category 5e (24AWG)  Color: 300m / B&W: 600m  15 kHz to 5 MHz  Attenuation  Impedance 60 dB 0.5 dB Max Coax, Male BNC 75Ω  UTP, RJ45 100Ω Wire Type  Network Wiring One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)  Category Type  Impedance DC Loop Resistance  2 or better 100 ± 20 ohms 18 ohms per 100m 3 www.buildingsecurity.com.sg  Differential Capacitance 62 pF/m max Power  Power Input  Power Transmission No External Power Required DC 28V up to 300m via UTP Cat5e/6 Connector  Video Input  Video Output RJ45 Jack Female BNC Connector Protection Surge Protection  Built-in Transient Voltage Suppressor(TVS)  Antistatic Yes Mechanical  Housing Black galvanized  Body Color Dimensions (L x W x H)  Black 290 x 170 x 44.5 mm (BNC connector & mounting bracket excluded)  Net Weight 1950g Environmental  Operating Temperature Relative Humidity Storage Temperature  -10 º ~ 50 ºC 10 ~ 85% (non-condensing)  -10º ~ 70 ºC 4 www.buildingsecurity.com.sg Application Diagram Ordering Information • ALB-4504VPS-28VDC 4-CH Power Supply Passive Video Receiver Hub For Sales Enquiries: [email protected] 5